LAN, connection bridge

Similar Questions

• E4200 Lan LAN connection - how to access the router

  Just bought the E4200 (for a home network) and have implemented as a Lan - Lan connection success. My Siemens Spreadstream DSL modem 6520 provided by Bell Aliant (is a wireless router / and is used as DHCP).  On the E4200 as per instruction changed the IP of E4200 address to 192.168.1.2, turned off the DHCP and NAT set to disabled. The E4200 is linked directly from the SpeedStream ethernet port to ports numbered on E4200 (not the internet port). The SpreedStream also feeds a Linksys switch with 16 ports (SD216).  When I connect a laptop through the new E4200 wirelesss network, I am able to see the rest of my network fine.

  When I connect a PC with the CISCO software installed to one of the ports E4200 software cannot access router of the E4200. I type 198.168.1.2 as a web address, but cannot connect. My question is, after all, the background information is... How can I access my new router E4200 to make changes with my lan - lan configuration. I want to be able to add an external drive USD to USB port of the E4200 years set up the account of wireless of comments.

  Kind regards

  Kevin Reid

  Charlottetown,

  Prince Edward Island

  Canada

  Change the address LAN IP of the E4200 to 192.168.2.2. Except, however, if 192.168.2.2 is part of the Siemens server DHCP address pool. Check which addresses IP Siemens allows to assign by using DHCP. The E4200 address must not be included.

  If you have the latest firmware installed your E4200 takes the bridge mode. In bridge mode, you can use the E4200 as access point connecting with the internet port for your Siemens. This way you can also use network comments and other features that will not or do not fully work with the configuration that you have right now...

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• How to make the computer to look for SBRIO on a LAN connection when wireless connections LAN and are active

  Hello

  I plugged my laptop to a SBRIO using a cable, I also did the same mask subnet the SBRIO and my wireless connection for laptop is also active. I run an application to transfer files from the network to the SBRIO. I was able to download the files from the network using the wireless, but when I try to transfer the files from the laptop to the SBRIO the application attempts to use the wireless instead of the connection to the local network. Is there anyway that I can apply to use the LAN connection instead of wireless?

  Thank you

  Mouda.

  You must manually configure the settings for the SBRIO and map NETWORK cable on the PC. They must be presented on the same subnet. Using the crossover cable, you can configure your PC to use an address like 192.168.0.10 with a subnet mask of 255.255.255.0. Configure the SBRIO to use an address as 192.168.0.11 with a subnet mask of 255.255.255.0. The PC uses the network connection by default for all addresses that do not match the specific subnet on teaching secondary (cable in your case) NIC

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• Without LAN connection after logon applied credentils it takes a lot of time to load items on the desktop

  Original title: startup problem

  during the priming of the laptop without LAN connection after logon credentils applied it takes a long time to load the items on the desktop, but by connecting the laptop with LAN a boot of the computer LAPTOP, all right, please provide a solution for this problem of starting.

  Hello

  I removed IE 8, now it works fine

• After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)

  After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.

  New Aspire E11, Windows 8.1

  Help, please.

  Here is how I fixed it:

  Go to control panel > network and Internet > network sharing Center

  Click on "Change adapter settings" in the left pane.

  Right click on your map. Select "Properties".

  There will be a box titled "this connection uses the following items."

  Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:

  KEEP THESE CHECKED:

  Client for Microsoft networks
  QoS Packet Scheduler
  File and Printer Sharing
  IP v6
  Internet Protocol v4
  Driver Link-Layer Topology Discovery map IO
  Link-Layer Topology Discovery recall

  Uncheck everything else.

  Go to network and sharing, disable and re-enable the adapter.

• LAN Connection stopped working on my computer running WIN XP MEDIA CENTER

  My LAN connection stopped working on my WIN XP MEDIA CENTER-based computer. I have access to the internet with optimum online. I have a router connected to my cable modem (US Robotics) wireless and desktop with the functioning of the wired connection stopped. My wireless connection on my laptop works very well on the same network. I first stop the modem, router, computer and re started at all. Modem Router 1 2nd, then on computer. Usually works, but not this time. Contacted optimum online and went through some procedures to correct the problem. Open cmd prompt, ping tried only to get 3 of any answers and 1 reply. Tried ipconfg / renew, did not work.  Firewall had closed during all of this. Service representative from optimum online said that he could see my modem was working but something like a firewall was blocking my computer access. Tried ipconfig/all and gave him the ip address he asked which showed, 169.254.80.196, he said that address will not work and we continued trying to renew the ip address, and we could achieve.

  Now I mention here that this problem occurred when I had a power surge while I was online. I rebooted and this is the problem that I was. I asked the rep optimal online what else could be the cause as a virus or damaged surge my LAN or OS and he said for me to try to get in touch with microsoft and perhapse they could help me more. I hope someone has an answer for me.

  Please... Help!

  Thank you

  Don Soutar

  Watch 169.254.x.x IP address only:

  • The connection to the LAN is configured to obtain an IP address automatically, and:
  • He cannot communicate with your router to get the address.

  The surge may have damaged the computer's Ethernet card.  If so, replacing it with a new adapter will fix the problem.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Wi-fi/lan connection only works on some devices

  Hello... I have problem with wi-fi/lan connection. I work in a school with about 100 children. The problem is that some computers/phones/laptops can connect normally to a connection wi-fi/lan but some cant. The internet icon actually shows normal connection, but you cannot browse the internet. When this happen the only thing I can do to help temporarily change the mac address of the device with software changing Mac and which usually resolves it. So maybe the problem is that too many devices are connected at the same time or mac addreses interfere with each other or something. I have tried almost everytnig, reseting routers, change the settings of the router, changing channels, etc. of mac filtering... It was working fine before. Maybe you can help. P.S. Sorry for my bad English :)

  Hi Mark,

  I suggest you to ask your question in the TechNet Forums, where we are the support technicians who are well equipped with the knowledge on networks.

  You can check this link to post this request.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Make an ad-hoc and share the LAN connection to the Wi - Fi

  How can I get the tab share for my mini HP laptop so I can make an ad-hoc and share the LAN connection to the Wi - Fi so I can get internet to my iPhone. (otherwise the laptop do a hotspot) window 7 I think I

  Hello

  I suggest you to see link and check if it helps.

  Set up a computer-to-computer (ad hoc) network: http://windows.microsoft.com/en-US/windows7/Set-up-a-computer-to-computer-ad-hoc-network

  Hope this information is useful.

• Remote VPN - no remote LAN connectivity

  Hi all

  I'm having a problem with my remote access VPN to home. I have a router 800 series which is serves as the VPN (this is also my ADSL router modem), and there isn't enough work as it should...

  I can establish a connection to the outside world, and when I run show crypto isakmp/ipsec his I see relevant entries. However, my problem is that once connected, I cannot ping anything in my local network. I can't ping even inside my ADSL router interface. I have another 800 series which is the next leap in broadcasting wireless clients, and is not accessible by ICMP either when it is connected through the VPN.

  I won't go through all the troubleshooting steps that I've taken the case, this post will be a saga. I guess it's a routing problem or a NAT? It is not all NAT entries for the VPN client when it is connected, so I think that I bypassed that correctly.

  I stripped my config back a bit just to try to make it work, I've pasted below:

  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  hostname blah - blah
  !
  boot-start-marker
  boot-end-marker
  !
  enable secret 5

  !
  AAA new-model
  !
  !
  local AAA_VPN AAA authentication login
  local AAA_VPN AAA authorization network
  !
  AAA - the id of the joint session
  !
  resources policy
  !
  !
  !
  IP cef
  IP domain name blah.com/results.htm
  name-server IP 208.67.222.222
  property intellectual ssh
  property intellectual ssh

  property intellectual ssh
  no accounting vlan
  !
  !
  !
  username secret blah 5

  username password blah 7
  !
  !
  crypto ISAKMP policy 1
  BA aes
  preshared authentication
  Group 2
  life 3600
  !
  ISAKMP crypto client configuration group xxxxxx
  password key 6
  pool VPN_address_pool
  !
  !
  Crypto ipsec transform-set VPN_transformset aes - esp esp-sha-hmac
  !
  Crypto-map dynamic dyn1 10
  game of transformation-VPN_transformset
  reverse-road remote-peer x.x.x.x (the ISP gateway address)
  !
  !
  list of authentication of card crypto client VPN AAA_VPN
  VPN isakmp AAA_VPN crypto card authorization list
  open crypto map configuration VPN client address
  crypto map VPN client configuration address respond
  VPN ipsec-isakmp dyn1 10 crypto dynamic map
  !
  Bridge IRB
  !
  !
  interface Loopback0
  no ip address
  Shutdown
  !
  ATM0 interface
  xxxx.xxxx.xxxx Mac address
  no ip address
  no ip redirection
  no ip unreachable
  No atm ilmi-keepalive
  DSL-automatic operation mode
  !
  point-to-point interface ATM0.50
  link to high-speed description
  DHCP IP address
  IP mtu 1492
  NAT outside IP
  IP virtual-reassembly
  no link-status of snmp trap
  ATM with a road ip bridge
  PVC 0/101
  aal5snap encapsulation
  !
  VPN crypto card
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface Vlan1
  no ip address
  Bridge-Group 1
  !
  interface BVI1
  description of the LAN interface
  IP x.x.x.x 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  IP local pool VPN_address_pool x.x.x.x where x.x.x.x (do not overlap with any of my other used private beaches)
  IP route 0.0.0.0 0.0.0.0 x.x.x.x (Gateway ISP)
  IP route x.x.x.x 255.255.255.0 x.x.x.x
  !
  no ip address of the http server
  no ip http secure server
  IP nat inside source tcp static x.x.x.x interface ATM0.50 x x
  IP nat inside source map route ROUTE_MAP_VPN interface ATM0.50 overload (prevents the VPN pool specified in the line to refuse to ACL_NAT_VPN to be translated)
  IP nat inside source tcp static x.x.x.x interface ATM0.50 x x
  !
  ACL_NAT_VPN (basis of the road map) extended IP access list
  refuse the x.x.x.x (pool VPN) 0.0.0.255 ip x.x.x.x 0.0.0.255
  allow an ip x.x.x.x 0.0.0.255
  allow an ip x.x.x.x 0.0.0.255
  allow an ip x.x.x.x 0.0.0.255
  !
  access-list 1 permit x.x.x.x 0.0.0.255
  access-list 1 permit x.x.x.x 0.0.0.255
  177 permit icmp any one access list - ignore, used for troubleshooting
  ROUTE_MAP_VPN allowed 10 route map
  corresponds to the IP ACL_NAT_VPN
  !
  !
  control plan
  !
  Bridge Protocol ieee 1
  1 channel ip bridge
  !
  Line con 0
  exec-timeout 0 0
  Synchronous recording
  no activation of the modem
  line to 0
  line vty 0 4
  exec-timeout 0 0
  Synchronous recording
  transport input x
  !
  max-task-time 5000 Planner
  end

  Well, if you see encrypted/decrypted packets move away a lot of problems.

  You can TEST inside the router of the VPN Client (LAN) IP?

  This local network should have a default gateway pointing to the router or a route from the pool of VPN.

  Federico.

• Portege Z930: How to create GPRS / Wifi / LAN connection profiles?

  Hello!

  I can't find any software (Toshiba or Intel) on my Portege Z930 that allows to manage
  profiles of connections to be automatically connected GPRS or Wifi or LAN regardless of connections available (office, home, public area...)

  Toshiba Wirelss manager works with GPRS only and no wifi or lan

  Thanks for your help!

  Best regards

  Hello

  Such universal utility does not for me.

  Toshiba Wireless manager manages the profiles of 3G.

  Management profile and Wlan connectivity, you can use the TOSHIBA Configfree
  Here are some details:
  http://forums.Toshiba.com/T5/general-features-knowledge-base/Toshiba-ConfigFree-utilities/Ta-p/347098

  Well and LAN would work until the network cable is connected :)

• Error Code 10 Intel 82579LM LAN connection on Portege R830 - 13 c

  After the recent update 32-bit Windows 7, the connection to the local network cannot start (Code 10) in Device Manager

  "This device cannot start. (Code 10) »

  I tried to uninstall drivers / back / and install which follows Toshiba support page files, but does not solve the problem.

  lan-20110330164846
  brahim-20110331130330

  How Intel 82579LM Gigabit on Portege 830-13 C of working network connection?

  (wireless is fine)

  Hello

  Error code 10 is generated when the Device Manager cannot start the hardware device and usually its caused by obsolete or corrupt drivers.
  So I think that the driver installation should help solve this problem.

  I would recommend this as:

  -Go to Device Manager and uninstall the driver LAN
  -Restart the laptop but don t install the driver
  -Install the CCleaner and clean the registry
  -Restart the computer once more
  -Then go to Device Manager, select the network card (Ethernet controller) and install the downloaded driver

  As an option, I would recommend test page of Intel LAN driver.

• NB200-10Z - WLan and Lan connection problems

  Hello

  all I bought the NB200 & I'll put up the wireless connection. Everything seemed fine, but now I'm in trouble.
  On the network connections page, it shows the network connection wireless as "not connected".

  On the Network Setup Wizard, it shows the connection of wireless (atheros AR9285 adapter) & the connection to the LAN (Realtek) but says that they are disconnected.

  Any advice on where to go next would be very appreciated. (FYI, the modem is Speedtouch ST585)

  Matt

  Go to this page:
  http://APS2.toshiba-tro.de/WLAN/
  Update the WLan driver.

  I m not a NB200 owner but one of my friends has a NB300 and there was an option in the BIOS which enabled and disabled the Wlan
  Check in BIOS if this option is available in your case too

  Keep in mind that you use the right SSID, encryption right, the right encryption password and disable the MAC on your filtering router.

  Welcome them

• Satellite L650/1MC - WiFi and LAN connection keep dropping out

  In the last two weeks, that my wifi connection dropped regularly - only a reboot solves the problem. Because it became so frequent (and boring) I returned with an ethernet cable, which worked OK for a few days, but tthat hen started making the same thing: no internet connection.

  I must emphasize that my other active wifi (android and android phone Tablet) kit continue to connect to internet via wifi etc, even when the connection of the laptop has fallen. This leads me to suspect that the problem is mobile partner no router etc. relates. The laptop is rarely used on battery, so I do not have the power as a problem management.

  I have a Satellite L650/1MC running W7 64-bit. I made no changes to my system recently which may give rise to this problem - everything works perfectly until a few weeks before.

  I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Any suggestions to fix this annoying would be welcome!

  > I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Have you tried to reboot the router?
  Since the two connections (LAN and WLan) stops falling, I think that the router is the problem.
  OK, two other android devices seems to work properly but the fact is that router shares automatically and possibly IP addresses, the IP address cannot be assigned correctly.

  However, you can check the WLan and LAN TCP/IP protocol settings.
  Uninstall the TCP/IP v6 and use only the v4 TCP/IP for LAN and WLan.

  Also ensure that your security programs (firewall & anti-virus software) don't affect the internet connection.