Rescue and recovery 3.1 brings more backup

Similar Questions

• Missing from the 40 GB hard drive! (R61) - Rescue and Recovery said there is no backups?

  I have a laptop R61 140 GB running on Windows Vista. It is around the age of 18 months.

  Explorer Windows says that 82 140 GB GB is used.

  When I add each folder I get only 45 GB of used space. All I really on this computer is music 26gig & some vacation photos.

  I had this problem since I first got the computer.

  I looked through discussions here that suggested that the backups can be the cause, and a program called Rescue and Recovery was the problem.

  However, when I opened this program it says that there are no backups available. However, this program is no doubt trying to run on my computer every Wednesday I get a popup saying my computer was turned off and I want to run it (I say no).

  Tools SW file is 2 GB.

  On the windows Explorer when I right-click I see there is something called 'points system recovery', there are many. However, I can't understand it here, where the data is stored, or how I would delete it.

  Please help me because it's very frustrating because I have about 40 GB of music I would like to pass through but right now that uses a lot of my remaining space.

  Download this and you can see everything on your hard drive http://www.pcworld.com/downloads/file/fid, 64425-page, 1-c, downloads/description.html

• Rescue and recovery blocks for hours at 0% of backup

  Hello

  My R61 ran quite OK, but slower over time. I got through rescue and recovery made a backup of the entire system on an external hard drive. (I had come back to XP and recently did a total system backup on the external HD). So I haven't started the rescue and recovery, thinking that he should simply reinstall it previously saved system. Alas at step 2 the progress of rescue and recovery, the new generation of the system stopped. Black screen with the message: «backup system is...» 0 % ». Here I wait for hours. Nothing progesses.

  What should I do? Island of 'progress' is already happening for 6 hours! (I see that my external HD flashes from time to time, but the computer does not seem to do anything).

  What should I do? I fear that if I press the power button to restart the computer, I will plant it completely.

  Please help me!

  Thanks in advance

  Roger

  Rescue and recovery hung several times for hours. Yet, it seemed to work after 20 hours. Puhhhh...

  Lenovo at: Your UI during the rescue and recovery process is ineffective. He left me without any feedback for hours. Almost, I rebooted the computer during critical backups. Here you certainly should help the user to understand what to do and what not. How can I find out, it's OK to have a bar saying 0% progress made for 8 hours.

  Even now, I don't know what to do. The computer restarts, windows is OK. But now I can turn off the computer or is always something during rescue and recovery. The last time, he says, it is step 2 on a total of 5 steps. Is it still now something in the back? The rescue is complete? Where is the message telling me, he did the job.

  All users: be patient, do not hit anything it either by running a rescue and recovery.

  Lenovo: By the way, I had - after installing my computer with xp - makes a backup of the system. that I repeated it several times. When my HD arrived full, I remove some of the older versions, because anyway, I had the newer versions which worked perfectly. Alas, I didn't, which obviously rescue and recovery done a system save, later versions are simply updated. By removing the first version, I lost all the! So, I ended up having no actual backup of a validating at the beginning.  In short: Rescue and Recovery can be a tool very well for an IT expert. For the average user, there are much too many traps. Lenovo: Try to it you like-centered-design user instead of the user Board Chinese garbage, if in the future, you want to keep as «almost IBM» brand name For me, Lenovo - in this regard - is more "almost Chinese It-garbage".

• With the help of Rescue and Recovery to make backups of 3 different machines

  Hello, I have three laptop Thinkpad T400, X 61 and R61i. I want to back up by using an external hard drive. The HD is divided into three partitions, the smallest of X 61, the middle of R61i and most importantly - for T400. I backed up all my laptops in the appropriate partitions (base backups), but now, so I want to make partial backups, they go to the bigger partition (for the T400). Is it possible (and how) do R & R to always use the same partition for each laptop while safeguarding it?

  A few notes, to respond to your previous post:

  (1) Sysprep is used by administrators to deploy and image system to other machines. Basically, the system starts standalone RNR and save the image (drive C and the same HARD drive partitions) on the service partition.  Comment enumeration pleasure has to with additional partitions on the C drive HDD.  For sysprep to work, additional partitions must be of type Extended. The windows PE, is a windows "skimpy" PRE environment. For win7, the EP is based on Vista with a small set of win7 features added.  Thie PE is used for developers (as Lenovo) to install their systems.

  * None of this applies to a user at home like you and me *.

  (2) the logic used in the RNR for the GUI vs bent the advanced GUI are DIFFERENT.

  Example: the user has part C, D and E on C disk HARD drive.  Uses advanced parms to set backup (local) to go to E drive.

  If the backup through the advanced graphical interface, drive E is honored.

  If the backup is performed through simple GUI, the partition with the largest free space is used.

  Note: using the Second HARD drive don't offer NO choice to designate a partition target of \RRbackups.

  (3) view of backups.  It's clearly too.

  When a backup is performed, and RNR is locked on him, it will REFRESH the registry entries for the content of backup.dats in the \rrbackups folder. Subsequent backups of view will probably be read from the registry. That is to say no record of reloading. Simpified mistletoe might once again, just to use the registry, the locks of GUI in the new backup folder.

  (4) your letter removal/restoration

  a: I have no idea how autonomous RNR will react to the 3 folders on the second \rrbackup, IE the part 1, 2, 3.

  b. If rnr backups locked in the wrong \rrbackup folder, you will have a total mess. A symptom of this: you take a basic (full) backup, and the next backup, which should be an incremental, is actually another full backup.  This error could occur if you deleted the wrong letters.

  (5) you have a mess.

  If I save it again this PC, R & R is a point instead of a differential backup<>

  It would take a lot of work on you end to look in the backup files.  Not worth it.

  Again, the simpifed GUI backup use different logic. He likes the larger partition.

  From what you say, you used simplified and got the base of the machine backup 3 all go good part 1, 2, 3.

  Somewhere in this mess, he locked in a \rrbackups without a base backup folder and took another backup.

  who knows.

  ==

  Release notes:

  Review 4
  ----------------
  Location of backup changes when you select a smaller partition through the advanced interface of the Rescue and Recovery program.

  In the advanced interface of the Rescue and Recovery program, you select a partition more small capacity on your local hard drive as the backup location. Then, you switch to the simplified interface to create the backup. However, the backup is created on the partition with the highest capacity.

  To resolve this problem, back up your system in the advanced interface of the Rescue and Recovery program after you have selected the backup location.

  ===

  The solution is the cleanest way to follow. I would always use the GUI advanced for now on.

• Rescue and Recovery backup not file system - without error message

  I use, since 1985 the first IBM, Lenovo then. I was very happy, my next Lenovo will be bought next spring.

  But I'm just very disappointed. Daily tracks of rescue and recovery on the local disk, which later are copied to a backup drive.

  The program has never shown an error on the screen and still run perfectly-, I thought!

  A few days ago, I got a Windows error for the first time. There are a lot of missing files.
  I restored the system on the R & R and reboted. But cannot start.
  With a boot disk, I booted the system and could now see that all the Windows directory was empty!

  Unfortunately, I can not in R & R files see what files and directories contain a backup? Or can you?

  Question 1:

  So I would like to know how if someone can enlighten me.

  Then I started to investigate on what had happened. In c:-Library SWSHARE I found some files that I see is connected to R & R.
  In the engine.log file, I see R & R has written a large number of error lines, of which a part is reproduced below. File dates to 2011 and there are errors all the way

  Question 2:
  Why the program not onscreen when R & R run display errors, so that the user knows there are errors?

  Now I'm sitting at the bottom with a long nose, after 2 days and nights, trying to find a solution and restored the system several times and do not know how the file system works will come back on my PC so normally again.

  Be more happy if someone can tell me how to solve this problem.

  Here is a selection of error lines:

  Thu 17 Oct 08:41:59 ENGINE 2013: failed to send an IOCTL_FFDRIVER_ENCRYPT_OFF
  Thu 17 Oct 08:43:38 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu 17 Oct 08:43:40 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
  Thu Oct 17 08:43:44 engine 2013: out of CopySAM with dwRet = 0 x 00000000
  Thu 17 Oct 17:00:09 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu 17 Oct 17:00:09 engine 2013: DeleteSISAndExclude (delType 1, drive letter C, Destination 'C:\RRbackups', level 12)
  Thu Oct 17 17:01:25 engine 2013: DeleteSISAndExclude out with return code 0 x 00000000
  Thu Oct 17 17:01:59 2013 engine: br_funcs.exe - version is '04.17.20a.00 '.
  Thu Oct 17 17:01:59 2013 Verbatim: WriteDriveContents (DriveLetter ='C:', Dest = 'C:\RRbackups', level = 13, SleepCount = 0, DeviceType = 1, dwOptFlags = 0 x 00000001)
  Thu Oct 17 17:05:48 2013 Verbatim: 0x00000010883e6399 - space required before compression
  Thu Oct 17 17:05:49 2013 Verbatim: 0x00000001ef30e1bf - estimated space required after compression
  Thu Oct 17 17:05:49 2013 Verbatim: 0x0000001dae2dd000 - currently available disk space
  Thu 17 Oct 17:07:27 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\cookies.sqlite-shm' - WinRC = 0x00000000
  Thu 17 Oct 17:07:30 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\healthreport.sqlite-shm' - WinRC = 0x00000000
  Thu 17 Oct 17:07:31 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\parent.lock" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu 17 Oct 17:07:33 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\places.sqlite-shm' - WinRC = 0x00000000
  Thu 17 Oct 17:07:34 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\webappsstore.sqlite-shm' - WinRC = 0x00000000
  Thu Oct 17 17:08:28 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:08:30 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:02 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\NTUSER." DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:09 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:15 engine 2013: CreateFileW failed for the file 'C:\Documents and Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG LocalService' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:16 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\LocalService\NTUSER. DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:17 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\LocalService\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:18 engine 2013: CreateFileW failed for the file 'C:\Documents and Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG Settings' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:19 engine 2013: CreateFileW failed for the file ' C:\Documents and NetworkService NTUSER. DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:20 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\NetworkService\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:25 Verbatim 2013: cannot save short name of "C:\hiberfil.sys" - WinRC = 0x00000020
  Thu Oct 17 17:09:25 engine 2013: impossible to attributes of record for the file "C:\hiberfil.sys" - WinRC = 0x00000020
  Thu Oct 17 17:09:47 2013 Verbatim: cannot save short name of "C:\pagefile.sys" - WinRC = 0x00000020
  Thu Oct 17 17:09:47 engine 2013: impossible to attributes of record for the file "C:\pagefile.sys" - WinRC = 0x00000020
  Thu Oct 17 17:11:50 engine 2013: CreateFileW failed for the file "C:\Program Files\Bitdefender\Bitdefender\onaccess.dat" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:19:49 motor 2013: jump from the C:\Program Files\Bitdefender\Bitdefender\onaccess.dat file at the request of the user
  Thu Oct 17 17:23:10 engine 2013: CreateFileW failed for file ' C:\Program Files\Common Files\Bitdefender\Bitdefender threatens Scanner\smartdb - ntfs.db' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:33:13 engine 2013: jump to the folder C:\Program Files\Common Files\Bitdefender\Bitdefender threat Scanner\smartdb - ntfs.db at the request of the user
  Thu Oct 17 17:37:08 2013 engine: BackupFile failed - unable to "C:\WINDOWS" BackupRead - GetLastError() returns 0x00000020
  Thu Oct 17 17:37:08 2013 engine: unable to BackupFile directory C:\WINDOWS - dwRet = 0 x 00000516
  Thu Oct 17 17:37:09 2013 Verbatim: can't get exclusive lock for the entire file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Outlook\outlook.pst" - WinRC = 0x00000000
  Thu Oct 17 17:37:13 2013 Verbatim: can't get exclusive lock for the whole of the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Outlook\Personal folders (1) .pst '-WinRC = 0 x 00000000"
  Thu Oct 17 17:37:15 2013 Verbatim: can't get exclusive lock for the entire file "C:\Privat\bendtskov-hotmail Arkiv.pst" - WinRC = 0x00000000
  Thu Oct 17 17:37:16 Verbatim 2013: can't get exclusive lock for the entire file "C:\Privat\morkebjerg-hotmail Arkiv.pst" - WinRC = 0x00000000
  Thu Oct 17 17:37:17 2013 Verbatim: WriteDriveContents exit with return code 0 x 00000000
  Thu Oct 17 17:37:25 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu Oct 17 17:37:25 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
  Thu Oct 17 17:37:26 engine 2013: out of CopySAM with dwRet = 0 x 00000000
  Thu Oct 17 22:34:38 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu Oct 17 22:34:39 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
  Thu Oct 17 22:34:42 engine 2013: out of CopySAM with dwRet = 0 x 00000000

  
  

• Rescue and recovery lists no backup on USB Iomega eGO drive

  Hello

  I have been using an Iomega eGO external backups USB drive.

  I was able to identify and remove (if necessary) backups in Windows 7 and rescue & recovery running, but I can't get the list of backups at the start of a recovery in rescue & recovery DVD.

  Basically I replaces unencrypted with a SSD hard drive that supports encryption.

  The goal was to use a full backup immediately before removing the HARD drive to restore the complete system.

  At the start of the recovery DVDs, recovery utility & rescue lists not all backups, even when the check box for the list of backups on other systems is checked.

  It makes no difference if the selection of THE places or USB external drive.

  Any ideas?

  Backups are not much good if you can't get back them.

  If my old drive did not then I would be in a worse state than this. I can't say I'm impressed.

  Well, I've finally sorted this issue.

  I tried to create a new recovery disk.

  I even tried the recovery time in Windows and see what backups it detected. Yet once, I drew a blank.

  The question was this:

  On my W510 at least, none of the USB3.0 ports are recognized by Lenovo rescue and recovery software when you select the USB storage device. Once connected to a single USB 2.0 port the USB eGo has been recognized and listed backups.

  Unfortunately, this means a minimum of 6 hours to restore from a full backup!

• Delete backup files Rescue and Recovery after the uninstallation of r ' not R

  During the upgrade to Windows 10, Rescue and Recovery has been automatically uninstalled.  I had neglected to remove the external drive backup files before that.  I would like to locate these files so I can delete them manually.  What files are backups Rescue and Recovery?

  Y at - it a compatible version of Windows 10 Rescue and Recovery?

  I leave your external USB - HDD intact right now.

  You might like to win 10, win10 could not meet your needs and turn.

  A Loved via RNR win7 would be nice to have, just in case.

  If it comes to the test computer, your decision.

• Rescue and recovery cannot delete backups

  Hello

  I have problem delete old backups with Rescue and Recovery - always when I try to delete them, it seems to work, but it is not, it never ends... I tried to remove one of all backups, only the last or only the oldest or all of them together, but without effect. I have 6 backups about 45 GB together. And by the way that r & R does not well at all - also when I click on optimize backup storage space, it does not work...

  Eventually, it is normal that when deleting old backups, computer seems cold and it takes a long time, but I don't know if it never ends.

  I have the latest version of Windows XP Pro SP3, R & R 4.21.0016 R61.

  Is there a solution?

  Thank you very much!

  V.K.

  Uninstall rescue and recovery of add/remove programs. It will remove the backups in this way.

• Rescue and recovery will not restore backup files it finds when starting

  I recently had a system problem on my Lenovo computer and had to recreate the image. When I try to restore my backup using rescue and recovery (R & R), they prove inaccessible. How to access these backups?

  Details of the options selected in R & R are attached, as an image on the screen of the settings dialog box.

  Running R & R, backups (on an external HDD USB) are visible and can be selected as expected. When the computer restarts in the space of restoration work, after a warning do not turn off the power, you get the error message "the restore has failed because the backup was not found at the specified location. Accept that the computer restarts in Windows. In this case regardless of the options selected at the start of R & R.  Where appropriate I select the USB external storage device in the Setup program and select a backup of those listed.

  I also tried updating all Lenovo utilities, including R & R. The option 'get new updates"errors when downloading the package information Lenovo Service Center (1 on 1) at the helm of the 30% with the error" Exception should not met!

  

  A lot of ongoing issues.  Many Lenovo post deal with each issue. Intel, system update, create a recovery to the USB media.

  For now, I'll address your problems of rescue and recovery. It seems that your system worked well, until a database had records in doubles in it, and you want to use RI to restore a backup on your USB.

  Then you have attempted a return to the factory, which show a lot of questions.

  If I understand your request, you want to restore your system to some time in the past, using a backup RNR. Either last week or 2 months ago. Something that works.

  ===

  RNR will save all partitions on the disk C DD.  It never saves another HARD disk.  2 readers warning has been around for a while. If C and D are on the C drive, HARD drive, it will run through RNR.

  Single file restore only runs on the windows RNR.  But there is no need to restart standalone RNR (pf11 during startup).

  It is ok. At least the RNR version on windows can find and restore your USB /rrbackups, of 5 min or 30 hours. This works.

  ==

  Factory restore installs a RNR version right here. This version probably does not match the version on your USB. If you started the RNR factory with the USB version version, you might expect not found messages.

  ===

  On your system windows today, please state the version installed.  Start using pf11 and indicate the version installed.

  You cannot create recovery media and rescue on the same device. Your luck if anything boots on the USB (other positions).

  Essentially, the RNR standaone version must match the /rrbackups on USB.

  =

  How do restore you to the factory settings? pf11 through the work of rnr or external cd/dvd?

  You are the original owner of the machine?

• Rescue and recovery of backup fails: current drive does not match the previous backup

  I have just rebuild my T60p with a new hard drive for the recovery of Lenovo CD via the rescue and recovery CD. Once the system restore is complete and the laptop running, I took a full backup using Rescue and Recovery. This backup is the C:\ drive which was the only drive I had and was on a USB hard drive.

  In recent days I have the C:\ split in two, giving me a new D: drive, patched all system software, added my own data, and obtained the machine configuration as I want. I've also trashed the R & R hidden partition so I could make a bigger drive D:\ and created my own bootable CD R & R for future use - not that it makes a difference.

  Now, I want to take a second backup with the Rescue and Recovery tool. Naturally I want to back up the disks C:\ and D:\, but the backup fails saying: -.

  "The last backup of this system include the following drive letters: C: .

  Your system is now back up these drive letters: C: d:

  Please define drive letters, as they were before and Christine backup. You may need to exclude partitions created since the last backup. »

  Is there anyway that I can make a backup of disks C:\ so my D:\?

  The only option I see is to delete my previuos backup and I don't want to do because it can be useful in the future if I still want to restore my system to original state manufactured.

  Suggestions anyone?

  Thanks, Iain

  Given that you have saved on an external USB disk your backup will be saved in a

  the folder named RRbackups.  If you rename this file I - think - R & R going to think

  you do not have any backups, so the next backup will be a 'base '. If you

  never have to restore the original of your 'base' backup, rename the folders should allow.

• N500 Vista and Lenovo rescue and recovery Care do not backup

  I would use Lenovo Care - Rescue and Recovery for backup system on DVD. But R & R cannot do, and I don't know why. What is happen? I see that no stop window with the message "a backup on your system is underway" but progress are always 0%. I made the backup several weeks - then backup was corectly. Unfortunately now I have a problem with her.

  my laptop is lenovo n500 and Vista 32

  I solved problem myself in new R & R 4.21 instalation

• Rescue and recovery software will not remove preinstalled Partition

  I recently had a T450s by a great process and tries to get her comfortable environment again.

  My two latest Lenovo laptops had a recovery in the stock installation partition, and I was able to remove simply by running the top software and selecting an option amounting to "delete backup partition" or something allowing me to back up c.

  On this machine, I ran the software and he gave me an option to create a recovery media more. I installed the software, Thinkvantage Rescue and Recovery, and he has an option to delete backups, but does not recognize the partition.

  It's deeply annoying, I do not use it and he eats up to 15 GB. If anyone has a solution for this, please let me know.

  ADDENDUM:

  Moreover, now the software on the partition is not ongoing, saying: it does not find "recovburncd.exe" and try again. Help, please.

  So reinstall RNR has failed, but I realized that I could go into administrative tools and modify the disk partitions.

  I now have this problem solved, thank you for your comments.

• Lenovo 3000 N200 - cannot access Rescue and Recovery - MBR poss problem?

  I have a Lenovo 3000 N200 sick who was running XP home. I could not start XP and can only access the Rescue and Recovery utility in the Lenovo recovery Partition that would be to rebuild the hard drive to factory settings IE. Windows XP with no data. I managed to copy the data using a Paragon backup cd and then made the fatal mistake of attempting a repair MBR, which was a very tempting option on the Paragon rescue cd. Now, not only it does not boot to XP, but I can run is even more Rescue and Recovery to reinstall XP which is the problem!

  If I boot with windows install disc and take the option recovery console it stops, statement that "recovery console could not find the hard drives connected to your computer. Setup cannot continue. "

  I was wondering if someone another backup MBR restore could help me with this?

  So, if someone has a Lenovo 3000 N200 work and is willing to try to save the MBR to send it to me, then please get in touch. It is probably useful to make a backup for yourself where the same problems happen to you!  In my view, there are a bunch of programs that backup the MBR for example MBRtool, MBRWizard and so on.

  Any ideas, offer accepted with gratitude.

  Yes I know I could buy the Lenovo recovery disk, but it is a matter of principle for me avoid paying £50 or so if I can avoid it! We'll see if we can help here...

  Thank you

  Simonides

  I am pleased Andyp!

  The solution was to set the primary partition to inactive and value the recovery partition Active, then restart and use the Lenovo Care button (now finally works) to access the function of recovery so I could return the laptop to factory State.

  No doubt there are plenty of ways to do it, but the approach I took to solve this problem is released under

  1. use another PC to download Paragon backup and restore (I actually used the trial edition now but the free edition may have a similar feature)

  2nd burn a CD bootable backup and recovery 10.0.

  3. start the CD Lenovo, and after a long wait, a menu should appear with 11 options, the first of them being Paragon backup and restore.

  4. Select Paragon backup and restore.

  5 select properties in the pick a task window and you will see two partitions, a big enough (in my case Go 143, called Preload) and the other is quite small (6 GB called SERVICEV001).

  Note: this is an opportunity brilliant to use the Back Up Partition option to make a backup on external drive USB of the two partitions as the reconstruction of the hard drive with Lenovo Care button you will lose all data.

  6 right-click the partition preloads and select Edit and set idle

  7. made the SERVICEV001 partition right click and select Edit and set the Active

  8 remove the backup and recovery of CD and put it somewhere safe

  9. restart the PC and Lenovo Care button (might be called something different) should now work, allowing you to restore the hard drive to factory settings which will erase all data of a personal nature. You did a backup?

  10 Windows should then start as usual, reinstall Paragon backup and restore, and restore your data.

  Finally, look at this as a lesson to

  (a) you get a writable DVD and use the Lenovo menu under windows to create a floppy disk from Lenovo rescue and recovery started.

  (b) use Paragon or equivalent to create copies of images of each partition and ordinary differential copies of the primary partition.

  I hope this will help other owners who have a hidden rescue for example partition. IBM and HP and would like to receive feedback.

  Finally, I must acknowledge assistance patient e-mail provided by Taisia Smirnova Paragon support by offering me this solution.

  best, Simonides

  (If you found this helpful please click on the star to give me a point Bravo!)

• Rescue and recovery X 1 Win10PRO carbon

  Just got a X carbon 1 and modernized to win 10

  1)

  Wanted to use the system to make a picture, but I got

  ERROR: "there was a failure while compacting the virtual disk on the backup location. (0 x 80780151)

  Googled around, bu tno solution.

  Anyone know when it will be solved?

  2)

  And another problem. I am IBM and Lenovo user for several years, and the best backup system I've ever used is the rescue and recovery. After getting my new X 1 carbon with 8.1 Pro I upgraded to 10 Pro and if you come for the Lenovo of installation I clicked for works RandR 4.52, which proved in the software Lenovo, but unfortunately it download, unpack and then stops. Without any news. So I started the Setup file myslef, and... my God... it can not be installed!

  I'm angry.

  Why Lenovo not tell us this? And if she came, when is it ready?

  Lenovo Solution Center, if you use win8 or win 10, should offer NOT RNR as a backup option.

  If would be nice if they removed the advertising, "it takes a HDD to take backup more," store here.

  To win 10, I would like to start off the coast with a windows image backup.  Apparently, windows launched LSC backup, and you got the return code that you noted in the initial post. Backup Windows runs fast, but it lacks many features of RNR.

  I would like to run windows backup from the Control Panel, which you have done already. Some of the windows backup return codes and error messages, can be deceiving.  Check the EVENT VIEWER after windows backup error, to see if other return codes are present.

  Example: "you do have not enough free space on the device target to perform a backup' RC = 0 x 00000.

  Further, the question was NOT enough free space in the lecteur_systeme windows backup staging a zone index for vs.

  I would check the available in System_drive freespace.  This can be a hidden partition.  You need at least 200 MB freespace.

  A google search of the return code that State you have many successes.  I have try the backup, check the event viewer for VSS fail return code, which is passed back to backup windows.  If you have a VSS error, I would google search on the return code from VSS, windows backup not the return code.

• Question of rescue and recovery, and Client Security solution

  I have a thinkpad edge e220s for home use and I am trying to understand that these two thinkvantage tools will be of no use to me since I'm not on a corporate network or whatever it is (all marketing materials HE mentions admins etc.).

  Is the rescue and recovery just a backup solution with imaging of disk (as ghost)? I use a drobo for all my data storage, so I am not too concerned about backups as the drobo offers redundancy in the event of disk failure. The laptop has a SSD which doesn't have a lot of capacity if I don't want unnecessary tools that will have a lot of space. However if the rescue and recovery offers really useful features then I might consider its installation (and not using the backup feature). I could not make out what marketing materials meant by the solution of a single button for viruses and crashes.

  Second, the client security solution features other than Vault/Manager password on my model? I'm already using the beta version of the new (4) version of password manager which is autonomous and requires no client security solution. Again once the marketing material does not help a user at home like me understand very well.

  Any help will be appreciated!

  Based on your description I don't think rescue & recovery or Client Security Solution any value for you.