Satellite U300 - Windows XP does not see HARD drive

Similar Questions

• Portege M400 - Windows 7 does not see HARD drive

  Hi, I have the problem, I am trying to install Windows 7 on my M400, but he didn't see the hard drive.
  The hard drive is surly ok, ' couse I tested it in the other netbook, I can see it in the BIOS, but any program installation can not.

  (I tried both Ubuntu and XP Tablet Edition)

  Hi Radzik,

  I think that Windows doesn't see the drive HARD due missing RAID drivers Windows needs of these RAID drivers before you can install it because it doesn t contain these drivers for the disk HARD is not recognized. You can download the RAID driver from Toshiba Web site.

  You can then create a new installation disc using nLite with drivers or copy the drivers on an external floppy drive. Start Windows XP after you press F6 to load drivers from floppy drive.

  Check this box!

• Satellite 1415 does not see HARD drive

  I just finished my old 30g HD to a 160g via a cable usb/ide on my Satellite 1415 cloning/adaptation.

  I've used Norton Ghost who said using the copy MBR 'not' option, I have to format the new drive. It took me over six hours to do due to overheating closed the first period which forced me to do it again.

  Now with the new full disk, I installed in the machine and starts, received a message "NTLDR is missing" on the first try. After going in (WinXP) disk management I noticed that the new drive was now three scores, two the same size that the old hard drive and the last not allocated. I looked at the files in the first partition and found that I do not need so I deleted the files and the partition. The remaining active partition has all the Po files, that I need so I have it assigned a drive letter.

  Now to start with the new drive I get missing operating system message. I ve changed the boot order and linked to the boot the ghost CD but had no luck with either. Of course the machine does not see the disk, so my question is how I can get to see the new drive letter to start when it seems now that for a C:\ drive?

  The only option I see in the BIOS is boot order change. Thank you

  Hello

  To better understand:
  The ability of the entire HARD drive is recognized properly?

  To be honest, the whole story is a bit confusing for me. I use Norton Ghost with WXP too and I know that you can create your own recovery image and burn on CD or DVD. This medium, that you can use to install an operating system.

  You can also save files to recovery on the second partition and then copy to external HARD disk.

  With the new HARD drive using Microsoft facilities CD and install WXP. Create own partitions on the new HARD drive and all ghost copies files to the second partition (new HARD drive). You may not install all driver and tools but install Ghost on this OS fresh and naked. Start the ghost and Recover My Computer option. So, after 20 minutes, you'll WXP as on the old HARD drive.

  I did it with my old Tecra.

• Satellite Pro M70 does not see HARD drive sometimes

  Help me!

  My computer does not see my hard drive but see Installer and another computer.
  My hard drive is working and I put the new drive hard but computer does not see.
  And when I install XP on the computer I can see HDD format during the installation.
  And when prawns my computer I do not see the HARD disk again.

  Help me please

  Hello

  I think that it s a HDD issue naturally it s really strange that the HARD drive is different sometimes and sometimes it s is not visible, but I doubt that it could be software related issue. That's why I think that it s a drive HARD and in my opinion, you should check if other HDD SATA runs correctly.

  Good bye

• Windows 7 does not see SATA drive

  I just upgraded from Windows XP to Windows 7 and now cannot access the SATA drive that I use for storage. I desperately need help to access this drive.

  Any help will be appreciated.

  I've seen suggestions on the use of upgrade instead of the custom installation, but upgrade XP to 7 is not available.

  It doesn't matter anymore that I managed to blow a capacitor on the motherboard and had to replace the guts of the machine. The new motherboard had no problem see the SATA drive. Of course, he can't see that the IDE drives so I traded one problem for another.

  With all this, I made a whole new computer, which I'm sure that will soon show it's own set of problems.

  Thanks for the help. And you can mark this resolved.

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• Windows 7 does not see my Ultrabook XPS14 SSD

  Hello

  My work has receievd 3 Dell XPS 14 Windows 8. Not wanting to release Windows 8 on my users yet... I wanted to downgrade to Windows 7... shot in a disc of Windows 7 SP1 OEM. On the Windows installation and select custom (advanced option) set up does not see my drive. I can't load the drivers because it did not come with any, and on the dell site Web has not listed.

  any help is appreciated!

  Thank you

  Hi Craigomac1,

  This laptop has an option to UEFI boot or legacy. Try to change the setting.

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• Satellite U840-10N - Windows Installation can not see any drive

  Hi all, this is my first post so I hope that I chose the right place to post in.

  I just bought a new Toshiba Satellite u840-10n ultrabook. He joined WIndows 7 Home Premium 320 GB HHD + SSD of 32 GB.

  Even though I prefer Linux, I need Windows because of Microsoft Visual Studio. I downloaded Visual Studio (legally throught dreamspark.com), but it looks like it has some issues. In particular, I can't create any project.

  After searching the Web for this problem, I decided to try reinstalling Windows, hoping that this will solve the problem, and here's the point.

  Installation process of Windows 7 can not find any drive. I looked through the web a lot to solve this problem, even, without understanding.

  I read a lot of other people had the same problem. I tried different ways and I'm about to throw the laptop out the window.

  Is there anyone can help me?

  See you soon,.

  Marco Galassi

  You need to load the SATA driver before you start the installation of the OS. Try it please use the files from http://www.fileswap.com/dl/igfH0jVrap/

  I used it on my Win8 preinstalled satellite to install Win7 64 bit. Copy it to USB and install from there.
  Please post comments.

• Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

  My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
  Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
  Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

  Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
  But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

  Hello

  Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
  You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

  I think there must be something wrong with the data on the HARD drive.
  Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

  On the Toshiba page I found the companion disc.
  The accompanying disk is capable of detecting your CD-ROM drive on the
  Toshiba during the boot process. If you need access to your CD-ROM
  Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
  and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  It may be useful

• Satellite A200 - 23 c does not see the 2 GB Memory Stik Duo

  For me for laptop Toshiba Satellite A200 23 C. I

  t does not see memory card 2 GB Memory Stik Duo. I changed operating systems that did not help.

  All devices to see this card but on my laptop is not present.

  Other maps of working memory. How it can be a business.

  If possible, write in Russian and in English not absolutely understand that.

  Thank you

  First of all in this forum, you can post only in the English language. Other languages are not tolerated.

  Back to your question;
  Have you checked if your laptop Satellite A200 - 23 c supports this type of card?

  I ask because not all cards can be used in the slot of the card reader!

  As far as I know this laptop supports:

  -SD Card 8MB - 2 GB
  -SDHC 4 GB card
  -16MB - 2 GB xD Picture card
  -Memory Stick 8 to 256 MB
  -Memory Stick Pro 256 MB to 2 GB
  -MultiMediaCard 8 MB - 1 GB
  -miniSD (with SD adapter) 32 MB - 2 GB

  The Memory Stick Duo is NOT supported!