Reset indicator
Hi all. I tried to do a counter and it seems to work, but I can't do it to reset once the program is executed, it holds the previous value in memory. I tried to use variables, shift registers and property nodes, but I can't do everything. Can someone tell me what I need to do?
Thank you
Please, initialize the node of feedback. I think that would do the trick. Could you post the vi here please?
Tags: NI Software
Similar Questions
-
How to cure inaccessible ' subject: accounts in new FF on Win XP?
By clicking 'Sign in Sync' in the Menu tries to connect to ' remarks: accounts and fails with an "500" error, just as trying to enter this url directly in the browser (just updated to the last). Disconnected this browser the account and delete the old account, which worked (two days ago) but now cannot return to the configuration screen to switch to the new version of Sync. Having two machines Win 7 that I have updated to the new sync without problem. Also crossed the ' topic: config' on this browser and given parameters to zero all entries 'sync '. Start in safe mode does not help.
Use the old version for 10 years, including the older add-on, but eventually had to change because the old username is not an e-mail address and could not be used to access the new version.
Can you do a reset indicator to open upwards?You can check whether DOM Storage is enabled.
-
Y40-70 battery delivers. Measures erroneous, sudden stops
Hi, I have a Y40-70, barely 1 year if this, still in warranty. Battery has serious problems, I never know what is the % real. Will often be State of satiety, and then turns off suddenly. When you restart will report a 0% battery. very incoherent question and I have no idea what is wrong. I did a "reset"indicator on the lenovo power already. Would appreciate the help! (Recently ugpraded to windows 10 but had questions before updating also)
In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.
Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023
The numbers for Y40-70/80 batteries are:
Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248
Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part
Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part
To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.
Thank you
-
Desire x 2 Dock USB and card SD does not work
The USB port on the left in my dock Envy keyboard x 2 has stopped working. Whenever I anchor the portion of the Tablet for the keyboard, I see an error message "USB device" unrecognized in the taskbar. In addition, displays an 'unknown device' Device Manager, listed under the key "other devices."
Also note the card SD of Dock is doesn't work the same way. Some cards are recognized so that in the past he appeard as USB/removable disk device.
I tried to reinstall Windows, reinstall all the packages in a driver from the web, etc. Nothing works. A few times, I was able to use the port or card reader after plugging in the tablet. However, they invariably become non-functional the next time I log out/dock the tablet or restart the system.
I am quite experienced professional Windows support with thousands of hours of creation of hardware/software solutions around Microsoft platform. However, I am at a loss as to why I can't get this device to be recognized. All other Dock - right USB, HDMI output, keyboard and trackpad devices - work. The problem seems related specifically to the left and some hub USB root supports it and the SD card reader.
FYI, I'm a stranger for months, making it virtually impossible to send the diagnostic/repair unit. I hope that there is a hotfix for that and that someone who reads this will have a suggestion on how to proceed.
Thanks in advance!
RCK
Well, in a bizarre resolution to the issue, the dock has decided to start working again. Don't know what I did, but I suspect it had something to do with the UEFI settings stored in the CMOS. I searched update utility for BIOS Insyde Software documentation after witnessing of the docking station to return to life temporarily after re-flashing the BIOS. I found a setting in the platform.ini - ClearCMOS file - and I flipped it to '1' and re-flashed to see what would happen.
Nothing changed immediately, however, the next day I was invited by Windows Update to download the latest definitions for Windows Defender. When he was done, he prompted me to restart, I found strange as the Defender updates don't usually require a reboot. Then I noticed the "Windows Update" start screen, while the unit has been reset, indicating something was more than just a simple refresh definitions Defender.
Yet, I do not think anything of it and continued by usual until I noticed something weird: when I re-docked the Tablet I heard the familiar "donk doink, dink" tones. I did a double-take to make sure that nothing not hanging off one, working USB port (right side - it was empty) and then frantically connected to see what was going on a. To my surprise, the USB error message was gone and I could see once more the content of my 64GB SD card into the slot in the dock.
I took a screenshot of the Device Manager just to have a reference of work to see how it * should * look, then held my breath and detached from the tablet. I waited the Plug & Play tones, which indicates the docking drivers, had unloaded, checked device (no sign of the USB hub) Manager, hold for a count of ten and prayed while re-docking of the tablet. Yet once, the PnP tones shot and Explorer opens a window on my SD card.
Still not convinced that the "fix" would stick, I took the next step and restarted the machine. Again, everything was present when the system is back to the top and the procedure of disconnecting/dock worked as expected. My last test was completely power off the unit, wait for half an hour and then restart. Still works. In a last time, I checked the system event log to see what might have been for this mysterious Windows Update. The entrance to update itself mentioned only the definitions of Defender; However, I found several messages from the Installer service talks about the different status updates of Windows on "Absent". Very strange.
Anyway, it's been 36 hours and I continue to check to make sure that the dock is still working. So far so good. I'll feel better as soon as I spend the weekend, but for now I think that the problem is resolved.
As for what caused, and also what might have finally fixed, I guess this will remain a mystery. Could Defender blocked a significant update that was lit green subsequently after the update of definition? Or maybe my tweaking of the BIOS update utility. Trigger files INI Windows re-installation of some critical updates?
Who knows? And frankly, who cares? I'm just glad to have my dock that is doomed to return!
RCK
-
JQuery MoveColumns causes "this form contains unsaved changes" during the previous/press
I have a page Apex tabular 4.1 loading it moves the columns via jQuery following Script:
jQuery.moveColumns = function)
{
var tbl is jQuery ('table.report - standard');.
var colChanges = apex.item("ColumnOrder).getValue (); Contains the movements to make columns in the correct order
var colChangesArray = colChanges.split('^');
If (colChanges.trim () .length > 0)
{
for (var i = 0; i < colChangesArray.length; i ++)
{
moving var = colChangesArray [i].split(':');
Query.moveColumn (tbl, move [0], moves [1], 'AFTER');
}
}
}
If the user presses the next/previous button to get to the next/previous line set, they will receive the message "this form contains unsaved changes." You can click on the submit button and there is no updated\inserted lines. If I comment out the call to the moveColumns the next/previous buttons work without warning to the user.
It seems so move columns autour put an internal indicator reflection there are changes. Is there a way in my jQuery script after finishing move the columns autour, I can reset indicator (whatever that is) if the user is not prompted with the warning of unsaved changes?
I found this ad where they have been reset to the elements on the page:APEX 4.1 is possible to remove the message "unsaved changes" pagination? and once I added this function up to the end of my function moving columns around it has solved the problem. Now either he gives me the message the unsaved changes when I page. It will give me the message if there are unsaved changes when I'm trying to paginate so all is well!
-
Do you have any idea how to solve this problem.
Hello
I created a very simple game that plays music. It loads and plays automatically when you go to the game scene. The problem is when the game is over and you play again, the music starts again, not at the beginning, but layered, once on top of the other.
I would that be better with ActionScript that I am. I hope someone is able to help me solve this problem. I need to stop going around in circles with this.
Thank you!
Michelle
keeps track of the score
var score: number = 0;determines the first time that the fire button is pushed
to start the timer
var flag: Number = 1;create a new timer
var myTimer:Timer = new Timer (1000);
Variable that contains the name of the
music file to download.
var soundReq:URLRequest = new URLRequest ("music.mp3");Create an object of class Sound.
This will allow you to use methods
to manipulate the music.
var sound: Sound = new Sound();Create an object of the SoundChannel class.
This will allow you to control the audio playback.
var soundControl:SoundChannel = new SoundChannel();Create a new object to control the volume
var volumeControl:SoundTransform = new SoundTransform();Mark to keep track of the music (whether he plays or not).
0, the music does not play.
var flag2:Number = 1;set the initial note in the text box
count_txt. Text = "0";Adds a listener to the timer
myTimer.addEventListener ("timer", timedFunction);make the button invisible insect in the beginning
insect_btn. Visible = false;set the initial time in the text box
timer_txt. Text = "20";makes the insect disappear when the user draws on it
function disappear(e:MouseEvent):void
{
If the timer reaches 0
If (timer_txt.text is "0")
{
make the fire buttons and inactive insects
launch_btn. RemoveEventListener (MouseEvent.CLICK, target);
insect_btn. RemoveEventListener (MouseEvent.Click, disappear);
}
on the other
{
remove the button from the insect
insect_btn. Visible = false;
increase the score
count_txt. Text = String(++score);}
}makes the insect appear when the user
Click on the view button and begins
the timer if this is the beginning of the game
function target(e:MouseEvent):void
{
If this is the beginning of the game
Start the timer as soon as the user
Click on the view button
if(flag==1)
{
myTimer.start ();
flag = 0;
}
Position the insect on stage
insect_btn.x = Math.random () * 625;
insect_btn.y = Math.random () * 475;
make the visible insect
insect_btn. Visible = true;
}Displays the number of times and
When the timer reaches 0
makes the insect and inactive launch button
function timedFunction(e:TimerEvent)
{
the timer between 1 and more
Subtract 20 to create a timer that decreases the value
var tc: int = 20 - myTimer.currentCount;
display the clock in the text box
timer_txt. Text = tc.toString ();
If the number of timer 0
If (myTimer.currentCount > 19)
{
make the fire button and the inactive button bug
insect_btn. RemoveEventListener (MouseEvent.Click, disappear);
launch_btn. RemoveEventListener (MouseEvent.CLICK, target);stop the clock
MyEventArgs;
move image where is the button 'replay '?
gotoAndPlay ("done_frame");}
}
function playAgain(evt:MouseEvent):void
{
gotoAndPlay ("play_frame");
}
Load method applied to the sound object
who will be our music.
Sound.load() (soundReq);Play method applied to the sound object
starting to play our music.
soundControl = sound.play().
When you click on the btn_play, this function
will be called and it will play music
function playSound(event:MouseEvent):void
{
Check the indicator.
If the flag is 0, then the music is not playing.
If (Flag2 == 0)
{
soundControl = sound.play().
Reset indicator 1, to indicate that
Subsequently the music plays.
Flag2 = 1;
}}
When you click on the btn_stop, this function
will be called and it stops the music
function stopSound(event:MouseEvent):void
{
soundControl.stop ();
Reset the indicator to 0, to indicate that
Subsequently the music does not play.
flag = 0;
}
When btn_up is enabled, the function is called
function increaseVolume(event:MouseEvent):void
{
Adjust the volume by adding a unites.5
the current volume
volumeControl.volume +=. 5;
Change the volume of the background music
soundControl.soundTransform = volumeControl;
}When btn_down is enabled, the function is called
function decreaseVolume(event:MouseEvent):void
{
The volume in soustrayant.5 units
volumeControl.volume-=. 5;
If the volume is not less than zero
change the volume
otherwise to give volume to zero
If (volumeControl.volume > = 0)
soundControl.soundTransform = volumeControl;
on the other
volumeControl.volume = 0;}
set up event listeners
insect_btn.addEventListener (MouseEvent.Click, disappear);
launch_btn.addEventListener (MouseEvent.CLICK, target);
Add listeners to the play and stop buttons
btn_play.addEventListener (MouseEvent.CLICK, playSound);
btn_stop.addEventListener (MouseEvent.CLICK, stopSound);Add listeners to events for the up/down buttons
btn_up.addEventListener (MouseEvent.CLICK, increaseVolume);
btn_down.addEventListener (MouseEvent.CLICK, decreaseVolume);These two lines are already in your code:
Sound.load() (soundReq);
soundControl = sound.play().
Find them and replace them with
{if(!bool)}
bool = true;
Sound.load() (soundReq);
soundControl = sound.play().
}
and place
var bool:Boolean at the top of your code.
-
Y580 does not start after the battery indicator reset
Hi fans of Lenovo! 3 months now since I bought a Lenovo y580. A notebook of beast when it comes to games. Recently, I tried to use a preinstalled software from Lenovo to reset my battery indicator because it showed an erroneous accusation. The software did his thing - he charged the battery to 100%, then acquitted at 0 and off my laptop. Now, it does not - turn the button market / stop just makes battery LED flash 3 times and that's it! I tried to disconnect the battery and turn on - but nothing happens. What should I do?
Remove the battery and plug in the computer if the computer turns on then it might be the battery.
If this is not the computer may have messed up and bit.
and to be sure to keep it plugged in for a while.
the recalebrater of entirely fresh battery then fully discharge
-
How to reset the indicator of County of Terminal on the PXI-6608
Dear community,
Is it possible to reset the terminal number on the PXI-6608 indicator? When I use Get Attribute.vi I have the time to correct value first, but unfortunately (unlike DAQmx) reading of the value is not reset it...
I like to keep track of how many times he flipped. And I don't want to use another counter to do because I like to keep them free for other things.
Thank you!
Case No.Traditional DAQ doesn't have a way to reset the indicator terminal number, as far as I know. One thing you might be able to do is change the "output" in "toggle" mode and then read the "output status" to determine the reversals to determine when the State of the output has changed in your application.
I hope this helps!
Gus... -
Message of blackBerry Smartphones indicator does not reset
The message says I have 4 messages even though I read all messages and indicator before the mark all read.
If you go in your message list, click the menu button and then go in view saved Messages. Are there listed recorded messages? Also try to reset the unit. With the unit powered on, POURRETIRERLEPISTONPNEUMATIQUEETREMPL battery for 30 seconds and replace it. After restarting the device, see if the indicator resets.
-
I was unable to open to open Firefox after an automatic upgrade - black screen. Used safe mode and attempt to reset. Soon became apparent "missing profile". Removed and reinstalled. Same prompt.
See also:
This is usually caused by a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.
- Windows: %AppData%\Mozilla\Firefox\
C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\. - Linux: ~/.mozilla/firefox/
- Mac: ~/Library/Application Support/Firefox /.
You can use one of them to make the Creation/use of a new default profile for Firefox:
- Remove the profiles.ini file to force Firefox to create a new default profile
- Use the Profile Manager to create a new profile
- Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
- Windows: %AppData%\Mozilla\Firefox\
-
After battery indicator Reset computer laptop cannot turn on
Hi all
I have serious problem reggarding this battery meter reset. I started on my Y580 and went to work. When I came back the cell phone was off and I couldn't. There are no indicators that the power addapter was pluged. When I press the power button, the red light blinks in front just 3 times and that's it. I can't start and it does not show that the battery is charging. It's as if the laptop does not detect the addapter AC or battery.
The laptop is out of warrity!
Help, please!
Thanks in advance and best regards,
Petar Zanev
There is a thread below with a person having a problem with his gun and did not want to do the reset for precisely this reason. I offered an alternative that might work.
Well you can read now. I have no idea what would have been able to do. You can try pulling the Ac, battery, press the power button for at least 15 to 30 sec maybe he will discharge memory enough return lifel. Leave the battery for an hour anyway. Plug it into CA only and see if it turns on and runs. Then try to add the battery.
-
My account main hotmail has been compromised. I tried to reset the password, but somehow, it didn't work and now I can't access my account at all. I tried the validation page and so far it keeps sending me the same info. 2 links that lead me back to the verification page. I received a mail that I get a new live id. I got the same email address for over 10 years. It contains important financial information. Why can't they just send me a link to reset to a new email address?
The best place to ask your question of Windows Live is inside Windows Live help forums! The experts he specialize in all things, Windows Live and I would be happy to help you with your questions! Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.
-
Indicator output value resets all other sub time VI is called
Hi all
I have a VI under load certain values of a file and fills a table hint that is passed to the appellant VI. Time that the VI sub runs, the table (in and out) back to its default values from the void finishing execution VI (and the output of this call is affected). I tried wiring a constant empty at the table to make sure it is cleared at the beginning that seemed to have fixed the problem when the sub VI front is open, but when it is closed (usually if called from the main VI), the behavior persists. Breakpoints in place, the table retains its values until the last step of the execution (when the pane VI while break has a dotted blinking around it), but still resets on RESUME and returns false (default) values.
An excerpt of the call of the main VI, the sub VI and a sample file 'sequence' she would open is attached. Also, I'm running LV 2013. Any thoughts would be appreciated (I hope that I am not missed something too obvious).
Thank you
Andrew
I would avoid using the node property, particularly inside the loop. Whenever you call this property node, you force the Panel before redraw. Instead, build the 2D table using autoindexing on your curls FOR and write directly to your meter.
-
My parents have a problem with their Airport Express (latest generation, redeemed in 2014). We had a storm yesterday and dropped their internet. I went to try to reset their router, but it will not reset at all. The indicator light remains just orange/amber and when I try to do any sort of reset (soft, hard, factory) there's just orange/orange and never flashes as it should when it is set to zero.
Is this thing toast?
Would not be the end of the world as they asked me how to get a better signal in the yard and told them that probably they needed a larger router. Nature may have forced this issue.
Unfortunately, a solid amber status LED light seems to indicate a power supply for the base station. If you have already tried all types of reset, the chances are very good, as the storm has damaged the device and must be replaced. Sorry!
-
Messages indicator shows two new messages, but there is none
On my MBP, on my Messages icon in the dock, there is an indicator '2', as if I have two new unread messages, but I can't seem to find.
Is there a problem?
How to eliminate this indicator?
Try to restart the Dock using the following command in Terminal:
Killall Dock
Log outgoing/incoming and test. If this does not work, you need to look in your user Library/Application Support/docking station for the .db. Use the Finder "Go to folder" command. Enter ~/Library/Applications Support/Dock. Move the .db on your desktop.
Then try a reset of the docking station.
Applications/Utilities/Terminal enter the command
Killall Dock
Log out/in test. If it works fine, delete the .db from the desktop.
If the dock is the same, back up the .db you, crushing the latest.
If you prefer to make your library user visible permanently, go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J. When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder. Reprints of Leonie.
Maybe you are looking for
-
I was able to do so until the last update... I spent through the process several times since, but without success... including adding the complete URL, etc.. The only suggestion so far is that 1 of my modules could be the cause, but I have still the
-
I can't move e-mail which is read to my documents
When I read an email and I want to save in my documents, I'd go to files go to save under and it would show documents, but the title would be 3 att unread mail, then he would go to my documents, no 3 choices that I make, and the title would read unre
-
Magic Encyclopedia Moon light game is not Compatible with Windows 7?
I have Windows 7 and that you can install the game Viva, Magic Encyclopedia "Moonlight", but he is not lance. I tried checking the compatibility with XP/run as administrator, but still get an incompatible application message. What should do?
-
With the help of current license on several PC key
Hello My old system pre-built completely failed on me a few weeks ago and I decided to build a new system. My parts all arrive on Monday and I thought, did I use my license key present on another PC, I'll put my self about £100. I was looking around