After battery indicator Reset computer laptop cannot turn on
Hi all
I have serious problem reggarding this battery meter reset. I started on my Y580 and went to work. When I came back the cell phone was off and I couldn't. There are no indicators that the power addapter was pluged. When I press the power button, the red light blinks in front just 3 times and that's it. I can't start and it does not show that the battery is charging. It's as if the laptop does not detect the addapter AC or battery.
The laptop is out of warrity!
Help, please!
Thanks in advance and best regards,
Petar Zanev
There is a thread below with a person having a problem with his gun and did not want to do the reset for precisely this reason. I offered an alternative that might work.
Well you can read now. I have no idea what would have been able to do. You can try pulling the Ac, battery, press the power button for at least 15 to 30 sec maybe he will discharge memory enough return lifel. Leave the battery for an hour anyway. Plug it into CA only and see if it turns on and runs. Then try to add the battery.
Tags: Lenovo Notebooks
Similar Questions
-
Y580 does not start after the battery indicator reset
Hi fans of Lenovo! 3 months now since I bought a Lenovo y580. A notebook of beast when it comes to games. Recently, I tried to use a preinstalled software from Lenovo to reset my battery indicator because it showed an erroneous accusation. The software did his thing - he charged the battery to 100%, then acquitted at 0 and off my laptop. Now, it does not - turn the button market / stop just makes battery LED flash 3 times and that's it! I tried to disconnect the battery and turn on - but nothing happens. What should I do?
Remove the battery and plug in the computer if the computer turns on then it might be the battery.
If this is not the computer may have messed up and bit.
and to be sure to keep it plugged in for a while.
the recalebrater of entirely fresh battery then fully discharge
-
reset computer laptop back to factory settings
HOW CAN I RESET MY LAPTOP BACK TO FACTORY SETTINGS
Hello
Judgment of the laptop. Start typing away at f11 as soon as you press the power button to start the Recovery Manager that you can then use to reinstall the operating system.
Alternatively, if you have created a set of recovery disks, insert the first disc and restart the computer to start the process.
Either way is fine.
Kind regards
DP - K
-
No battery indicator and the laptop does not shut down after closing the lid
After returning from my lapyop return to caused by a virus factory settings I can't have my defiler of battery on my taskbar
and also I got my lap top programmed to close on the cover but can't find where to put in place
Hello
I suggest you to visit the web link below to change the change the power button cover option.
Once you have visited the link above, try the method to display the power plan options and then search forcover and the power button and choose your preferred option.
Hope the helps of information. Please post back and we do know.
-
Wireless driver uninstalled itself, computer laptop cannot detect WIFI
My wireless driver seems to have uninstalled itself. The blue WIFI LED indicator does not illuminate either. How to reinstall the driver without the disc? Someone's done it before, but I don't know how, and they are no longer available to help.
I found the solution. It turns out that the driver has not after all uninstalled at this time. I just went into the Device Manager, clicked on my card wireless network cards, you click on advanced, then antenna diversity and he went from auto to auxiliary voltage
My computer is a dell 1520, and when I tried to turn the WIFI until I solved the problem happened everything he just said no detected network and the blue LED does not turn.
-
Hello, Toshiba!
With the "hardware" program I put the switch on_ _automatic my laptop NB 510 _after raise the display_. Unfortunately, I don't have _can disable_ this feature.
I tried in the 'Control Panel - Power' to disable this function, I tried to turn off this feature of the hardware configuration, but nothing helps.
When I check 'turn off automatic registration' and restart my laptop, but nothing has changed.
Also I reinstalled windows, I got out at 08:00 the motherboard battery, turn off the power to the laptop and remove the main battery, unfortunately, nothing helped.This is awkward for me, because when the laptop into my backpack, it sometimes turns on itrself and the battery is very low.
How can I disable autoenrollment?...
OS: Windows 7, Windows 8, system BIOS version 1.40, THIS Version 1.00, function 'Open Panel - Power On' ("Power Management" tab) in the BIOS disabled, but it still works...
I'm really waiting for the answers, thanks a lot!
PS sorry for my bad English, it's automatic google translate.
I NB520 and it works fine (I can turn it off).
Try please enter the BIOS and set the default parameters by using F9 and then save and quit with F10. -
I had a problem, which lead to the other. I'll just show what I posted in the other thread. Thus, I have provided the link for reference.
This is the excerpt from this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/a42818dc-4037-4551-aaa4-bc1330d4203b?prof=required
"Well, then taking your advice, I found the software to restore the computer to its original state. I save all of his documents and then run the restore process. Should be no problem right?
NOPE! It installed fine, and now it is stuck in an ANOTHER infinite boot loop! (This laptop must love restart all the time).
So yes, this is what he does now.
It starts normally with the typical screen of Vista (the puke green bar fly across the screen). Then it comes up with the screen blue-green pretty fancy, and it says "Please wait while Windows continues to set up your computer...". »
Right now, it comes up with this box beautiful error "Windows could not parse or treat [C:\Windows\Panther\unattend.xml] unattended Setup answer file. The answer file is invalid. "with the OK" "button. You click on 'OK', it stops and then restarts, shows the same message.
I tried Googling this error, but nothing of the suite of solutions my situation. Ugh! Of course, I can't get back into windows and simply stop and start the restore process again.
Ideas? »
Just so that you know it's a she is a Windows Vista Home Premium 64 - bit SP1 OEMAct gateway.
http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su531.shtml
Above is how the gateway recovery is supposed to work.
Also, try this:
Try using a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the gateway > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
To exclude software as the problem.
See you soon.
Mick Murphy - Microsoft partner
-
* Original title: NONE PROBLEM of SOUND WINDOWS 7
I recently reinstalled my audio driver Realtek HD after a mistake and now I can not turn on the stereo mix on the tab "Recording" the sound options and even with the Digital Audio option (HDMI) who is apparently not plugged, I apparently tried everything and it's frustrating please someone help
Also when I put my cursor on my sound option on the toolbar there is obviously a red cross on it and he said: ' no speakers or headphones are plugged 'r
Aspire 5763Z it there is no trace of this model on the support site either UK or us Acer
Usually the system for a laptop drivers are obtained directly from that manufacturers of mobile support site, unless the manufacturer specifically says to use windows update drivers
-
My laptop screen goes black after a minute, even if I put power to never the brightness options and it stop after ten minutes
Hello
Try to run the electrical troubleshooting utility and check.
Troubleshooting of power allows to solve any problem with the computer's power settings.
a. press the w key and Windows and type troubleshooting.
b. press ENTER.
c. click Show on the left panel.
d. click Power.
e. click Next and follow the on-screen instructions to solve the problem using the troubleshooting of power utility.
Also, try to create a new power plan and check if it makes a difference.
Go through http://windows.microsoft.com/en-in/windows-8/power-plans-faq
Hope this information is useful. If you have any questions, please let us know.
-
E535 high battery drain when the laptop is turned off
Hello
I just bought a Thinkpad e535 and I have a very annoying problem:
Whenever I have turn off the laptop (not not hibernating, not to sleep) and unplug the power cable from the power outlet the battery loses about 20% of charge every 24 hours.
What I have done to solve the problems:
-Always on disabled USB in the BIOS
-Disabled Wake On Lan in Windows AND BIOS
-Run the powercfg /devicequery wake_armed command to see if any device is programmed to turn on the laptop
BIOS version is a later (2.08)
Software Power Manager is 6.32
Any help will be greatly appreciated
-
I recently moved and - as I suspected that would happen - I can't install my printer (yet!). I tried "advanced set up of the printer", but neither the laptop can find the printer, or the printer find the laptop! I am aware of the fact that the wireless here signal where I am is quite low, so if I have to, I'll have to connect via a cable - but what kind of cable do I need? Please can someone ' "talk me through it in the words of one syllable?
Hello, since it's an Epson printer please contact people food at Epson for any assistance.
-
Repeat "Logout" and never turned off. Also, I can not all programs when you try to go to uninstall programs. Help!
Hello
What version of Windows XP and service pack are you running?
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=6676
You can try the troubleshooting provided in the link below steps to fix the problem.
Advanced Troubleshooting for shutdown problems in Windows XP
http://support.Microsoft.com/kb/308029
I would also like to launch a full scan with your antivirus/malware removal.
Microsoft Security Essentials:
http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
Malware
-
HP mini 1000 laptop: password bios reset computer laptop hp mini 1000
BIOS pwd on stsrt with cnu9321son code
If that didn't work
Try: e9lof73n19
-
computer laptop suddenly just stop now no connection available
Hello, thanks for reading, hope you can help!
my computer laptop zoostorm turned off with no warning screen - no bsod, no dialogue - only in black. it restarts normally and all systems appear fine except for wireless network. adapter seems to work but does not detect the network. I have not recently installed new software or mingled with all the settings.
laptop is http://www.ebuyer.com/411061-zoostorm-laptop-7873-9042 running win7 ultimate 64
network card is a realtek rtl8723ae-bt
I have:
connected to the network with other devices;
laptop recharged;
verified wireless fn key.
people with disabilities/uninstalled the antivirus and firewall;
confirmed adapter is present in Device Manager;
Uninstall/reinstall network adapter;
exhausted (useless) windows diagnostics - see below
installed new drivers (http://www.x-drivers.com/catalog/drivers/wireless_networks/companies/realtek/models/rtl8723ae/25109/download.html)
system restore;and am now at a loss... Please help!
Paul
diagnostic ipconfig and windows connects to follow:
Windows IP configuration
The host... name: prosodie-PC
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Wireless network connection Wireless LAN adapter:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: RTL8723AE Realtek WLAN 802.11n PC
I E NIC
Physical address.... : 20-68-9D-DC-FE-20
DHCP active...: Yes
Autoconfiguration enabled...: YesEthernet connection to the Local network card:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
Description...: Realtek PCIe GBE Family Controller
Physical address.... : 00-90-F5-DB-7B-92
DHCP active...: Yes
Autoconfiguration enabled...: YesBluetooth network connection Ethernet card:
The connection-specific DNS suffix. :
... Description: Device Bluetooth (personal area network)
Physical address.... : 20-68-9D-DD-27-F6
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::9c7e:f0b:3695:8727% 12 (Preferred)
IPv4 address...: 192.168.44.16 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: April 2, 2013 16:45:51
End of the lease...: 2 April 2013 22:45:51
... Default gateway. : 192.168.44.1.
DHCP server...: 192.168.44.1.
DHCPv6 IOOKING...: 203450525
DHCPv6 DUID customer...: 00-01-00-01-18-9A-36-4F-00-90-F5-DB-7B-92DNS servers...: 192.168.44.1.
NetBIOS over TCP/IP...: enabledTunnel adapter isatap. {F8109BED-F014-495A-B71F-C9D5CA478A57}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft ISATAP adapter
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesTunnel adapter isatap. {741CB214-641C-4A24-982A-7DAC6C64ADA5}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #2
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesTunnel adapter isatap. {60888F0E-1FAD-4A6A-85CE-BF4903A365CC}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #3
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Teredo Tunneling Pseudo-Interface:
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
IPv6 address: 2001:0:4137:9e76:2 c 90: 8419:ad7b:1 b 74 (Pref
made a mistake)
Address IPv6 local link...: fe80::2c90:8419:ad7b:1 b 74% 14 (Preferred)
... Default gateway. : ::
NetBIOS over TCP/IP...: disabled-----------------------------------------------------------------------------------
Publisher of Windows Network Diagnostics details
Problems found
Problem with the pointProblem adapter or wireless access with wireless adapter or access point detected
Reset complete wireless adapter
Investigate router or point problems over access
See Windows Help and Support for more information about connectivity finished wireless issuesPublisher of Windows Network Diagnostics details
Problems found
Problem with the pointProblem adapter or wireless access with wireless adapter or access point detected
Reset complete wireless adapter
Investigate router or point problems over access
See Windows Help and Support for more information about connectivity finished wireless issuesProblems found details
5 problem with adapter or wireless access point detected
Reset complete wireless adapter
Network Diagnostics log
File name: 33DAA94C-86AF-43B6-A3D5-9E94795F2ECB. Repair.Admin.1.etl
Investigate router or point problems over access
If you are connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. unplug or switch off the device. 2. After all, the lights on the device are off, wait at least 10 seconds. 3 turn the unit back on, or reconnect the power plug. To reboot a router or access has a built in battery point, press and quickly release the reset button.
Network Diagnostics log
File name: 1040E415-BA3D-46B7-B88F-5BF8F48311A1. Repair.Admin.4.etl
See Windows Help and Support for more information about connectivity finished wireless issues
Windows is unable to solve your problem of wireless connectivity.Details of detection
Diagnostic information (network card)
Network card diagnostics information:Network adapter wireless network connection driver information:
Description...: Realtek RTL8723AE WLAN 802.11n PCI-E NIC
Reference of the manufacturer.... : Realtek Semiconductor Corp.
Provider of...: Realtek Semiconductor Corp.
Version...: 2002.1.1201.2011
INF file name... . : C:\Windows\INF\oem17.inf
Date of the INF.... December 4, 2011 13:24
Name of the section.... : RTL8723ae.ndi
Hardware... ID: pci\ven_10ec & dev_8723 & subsys_072610ec
Instance... state flags: 0x180200a
Status code of Device Manager. . : 0
IfType...: 71
Type of physical support...: 9Diagnostic information (wireless connectivity)
Details on the diagnosis of wireless connectivity:Information for a diagnosis of connection
The GUID of the interface: f8109bed-f014-495a-b71f-c9d5ca478a57
Interface name: Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC
Interface type: Native WiFiConnection incident diagnosed
Auto Configuration ID: 1List of visible access points: 0 item (s) total, 0 article (s) poster
History of connection
Information for Auto Configuration ID 1
List of visible networks: 0 item (s) total, 0 article (s) poster
List of favorite networks: 0 item (s)
Diagnostic information (wireless network adapter)
Details on the diagnosis of wireless network adapter:For all the info on this session, see the event information of wireless connectivity.
Helper class: Native WiFi MSM
Initialize status: successInformation for a diagnosis of connection
The GUID of the interface: f8109bed-f014-495a-b71f-c9d5ca478a57
Interface name: Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC
Interface type: Native WiFi
Profile: Discovery connection
SSID: (Unnamed network)
SSID length: 0
Connection mode:
Security: No.
Connect even if the network is not broadcasting: No.Result of diagnosis: no problem found
Network Diagnostics log
File name: 33DAA94C-86AF-43B6-A3D5-9E94795F2ECB. Diagnose.Admin.0.etl
Other newspapers and Network Configuration
File name: NetworkConfiguration.cab
Collection information
Computer name: PROSODIE-PC
Windows Version: 6.1
Architecture: amd64
Time: Tuesday, April 2, 2013 17:18:37Publisher details
Windows Network Diagnostics
Detecting network connectivity problems.
Package Version: 1.0
Publisher: Microsoft WindowsYou can mark it as answered by yourself. Strange, I noticed in your IPconfig to output your bluetooth has an IP address and the gateway assigned. I wonder if this is your problem and you had to wait for the dhcp lease expires.
Glad it worked itself.
-
I installed CS and LR on my new computer. Computer has problems of hard drive and completely frozen. Totally corrupt C drive. Return the computer to the dealer after a day of Exchange. Cannot disable LR or CS6. Now see "Should disable" message. I am of course unable to do. Please advise...
When you have a non-functional computer and cannot turn it off, click on the link below
Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations
Maybe you are looking for
-
Can not create groups of tabs
-
My office is not available in my save dialogue
I have als = ways able to temporarily store the files on my desktop. Now all of a sudden the desktop does not appear when I go to pen a file or record a. What should I do to get it back. I went to the finder preferences and he said it should appear
-
HP 110 series produces no K5N17: graphics card
Games illiterate mother needs help please. My son says that this office is not the graphics in support of two of its games. What graphics card do need me? Thank you.
-
I have a Tecra M4 which is about 4 weeks. All of a sudden (without changing any settings or install new software) it will not now go into tablet mode. When I turn the screen and click it down, it turns off and by connecting an external monitor, I dis
-
Construction plan necessary to change HDD on Satellite 1110
Hello friends.I have a problem with the change of the HARD drive on my laptop. Give me a plan of construction of the work? Thank you and forgive me my English :-) Homer J.