Reset parameters 'sleep' Vista/Gateway nv52

Similar Questions

• Continually resets mode sleep and display Turn off

  original title: customization.

  I feel constantly reset my "sleep mode" and "Turn off display", even if I did 'never' whether on battery or plugged in, in my folder customization. How can I fix it?

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop guard reset after sleep with Ultra II 960 GB installed

  I have problems with my new SanDisk Ultra II 960 GB SSD card into the laptop Asus Q550LF running Windows 10: laptop guard reset after being woken up from sleep.

  Look in the Windows event log, event of sleep is actually absent. This event was recorded while I used the HARD drive that came with the laptop.

  I installed the SanDisk SSD dashboard and everything seems ok. Firmware is up to date.

  Any allusion to what might solve this problem before that I am trying to sell this SSD or return it to SanDisk?

  I've updated the BIOS and this has solved the problem.

• Monitor won't wake from sleep - Vista

  I know it was a topical issue a few years ago, but I still can't monitor back on sleep of the form.

  Card HP computer - Vista 64 home premium SP2 - 512 MB NVIDIA GeForce9500GS

  I tried many patches assumed there.

  Updates on this issue?

  Suggestions in these links help you find a solution for the issue.

  http://social.technet.Microsoft.com/forums/Windows/en-us/42e3381e-19ef-4078-927d-1208a5fc48f5/desktop-wont-wake-up-from-sleep?Forum=w7itproperf

  See also:

  http://social.technet.Microsoft.com/forums/Windows/en-us/eb057f5d-B3E9-419e-AC72-3e00011bf961/monitor?Forum=w7itproperf

• reset password windows vista premium hp computer pilvion9010us laptop

  I made an administrator password and did not have a backup need help

  Hello

  You can't do a reset of your password disk once you have forgotten.

  A disc of rest must be made before your password is forgotten.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Tips from Microsoft in your situation is to reinstall the operating system

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log in to Windows and you will need to re - install Windows. »

  See you soon.

• Is it useful to reset my Windows Vista Home Premium?

  He is three years old (he got the summer three years ago) and it is moderately-heavily used, as in, it is used every day, and there are many programs and files downloaded and installed I do not use. Through my computer and delete all of these files would take much more for a long time that simply reset and its replacement by backups.

  My computer is idle or, at least I think, however, I was maybe just more patient three years ago.
  In addition, please don't suggest you get a new computer, or to download a program to uninstall other programs for me, because my computer spastic and these programs tend to crash.
  Ah, Yes, that's another question. Some programs that I want to use more (Skype, Apple Software Update, RegClean, etc.) crash as soon as I opened the, and there seems not to be an error with the program, because I posted on other forums vain.
  So, is it useful to reset my computer? I can do that easily, it will take little effort. Basically, I want to say it's worth it, is, she will fix these issues, such as the opening of the program slowly and crashes random application? Thanks in advance.

  Hi MitchellKager,

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also see the following articles for more information about improving the performance of the computer:

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

   

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  I hope this helps.

• Why 'customize' does not meet the parameters of vista on a Dell laptop?

  I have a Dell Inspiron 1501 under the Vista operating system. For some reason any its has ceased to accept new office customization settings.  When I change the length of time that I want to turn off the display, put the computer to sleep or turn off the hard disk, it will not respond I went to extremes to make it work, point of use of the system restore disk and reboot the computer, nothing helps.  I had the program 'Fixit' diagnose and attempt to solve the problem. Okay, this isn't the greatness of the blue screen, but I would appreciate if anyone has a solution to this problem.

  Hello

  Check with Dell Support, their drivers and documentation online and ask in the Dell
  Forums for known problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -----------------------------------------------------------------------------------------------------------------

  Use the start-up in minimal mode and other methods in this troubleshooting to see if you can find
  or eliminate problems.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Question sleep Vista Ultimate

  Hi all

  I have a question regarding vista and my hardware not wake me up after you put the computer in standby mode. My bios is set for s3 and reminder VGA bios is enabled. I get a black screen and no function keyboard or mouse suite. Some of the forums I have watch say it is perhaps a matter of Nvidia, others say that its an OS problem. The one you suggest options that I might be able to try?

  Card mother MSI K9N2 Platinum
  Card MSI 9800 GT video
  OCZ 600w power supply
  OCZ sli memory
  AMD 7550 kuma
  3 old disks IDE PATA
  Keyboard PS2
  USB mouse

  Help, please!

  Hello Parker_Jones,

  Thank you for using the Microsoft answers Forum.

  There is a possibility that this behavior might be caused by a program not allowing the computer to wake up properly. Take a look at the article below and see if you can troubleshoot using the information contained in the article.

  A computer Windows Vista does not wake from sleep when a PassThru driver is installed

  http://support.Microsoft.com/kb/932633

  You can also use the mode without failure as a troubleshooting tool to determine the program that could be the cause of the issue. I've included the first part of the article below so that you will know how enter Mode without fail if you didn't know already. Please see the link to read the full article and complete troubleshooting.

   

  How to troubleshoot a problem by performing a boot in Windows Vista How to troubleshoot a problem by performing a boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Step 1: Perform a clean boot

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start to reduce this includes this image

  type msconfig.exe in the Start Search box and press ENTER to start the System Configuration Utility.Collapse this includes this image

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  c. under the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK, and then click restart.

  Let us know if this can help, or if you find additional information.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Home - no password, password reset disk or Vista DVD. What are my options?

  We have inherited a nice new PC which has Vista Home on it.  However, we did not inherit the Vista DVD or password reset for the PC disk password.  So, we are stuck and cannot get the machine to allow us of past the sign on screen.  Unfortunately, the PC came from my wife who is now deceased mother.  Are there options for sure this PC will again?  Or if it is enough to buy another disk of Vista and re - install?  Thanks for the pointers.

  Reinstall Vista.

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Power Options and reset randomly sleep mode settings.

  It turns out that windows 7 will change ALL its parameters of power in itself! I'll let him sleep a few nights, come home and wake up... only to see my login screen. (I have the normally disabled option in power options). But all my work is always there, so the machine does not restart (or turn off and just resume hybrids) is for sure in s3. Power options check and everything is set crazy, not all back to the default values for either.

  I'm running Windows 7 x 64 Home Premium. This becomes extremely annoying to say the least... Can settle us this?

  ~ MG ~.

  * Edit * I wanted to add that what happens on 4 computers in my friends home even. 2 desktop and 2 laptop computers and all are supported by a Windows Home Server all running windows 7 x 64 home.

  Thank you dewbert I've found that if I go to the command prompt by using 'powercfg' I was able to turn off all the power settings (I like mine to be always running until I want to turn off without exception) I disabled standby, hibernation and set to never turn off monitor and several other parameters. Here is a link to these parameters and so far no more problem.

  https://StackOverflow.com/questions/254066/turn-off-power-saving-options-via-command-line/258777#258777?newreg=dbb749a44ed54e43bdc8c5da48ead67d

  was one of the first things I did with my pc to get rid of norton delivered pre-installed (bitdefender I don't know) and use microshaft security essentials (mse) with no problem more his light and does all these pop-ups as avira and others. also, I went to the ms updates and set it to download, but let me decide when to install and for updates of device, I put that let me decide because I had that feature really get in the way to install things like the new graphics drivers, kept dang thing beat me to the punch!

• Reset infected Windows Vista

  I have a Windows Vista computer that has acted very strange for a long time. I had problems with the intruder for a very long time. The computer was directly followed, or Trojans did their damage. Don't really know how these things work. So I decided to reset the computer. He has worked in the past.

  This time, however, it was not possible to activate updates. Updates about 30 - 35, all dealing with intrusions and classified as "critical" by SM. Among these are W Vista service pack. Also not possible to update IE. Not even possible to use MS help/support. (It is written on another PC). I get the error messages that the pages are not possible to open.

  I need help to activate updates and that the computer is cool. Please give me some suggestions.

  Thank you

  Hello

  For 32 bits of internet explorer 9, try this link...

  http://download.Microsoft.com/download/3/7/E/37E6953F-684E-4E6B-987C-013135FFB181/IE9-windowsvista-x86-enu.exe

  and internet explore 8 32-bit... https://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx

  In fact, I had to get ie8 from a 3rd site like cnet... The Microsoft web page would not display...

  For the XP machine, I got lucky and found a previous installer that I had saved years!

  Just upgrade to IE8 will help if you haven't already...

  Regarding your language questions go... I have that have never met personally, but there are a lot of posts about this sort of thing in 8\8.1 of Win...

  My understanding is that language packs must be uninstalled before going to install Service Packs...

• black screen on startup, windows starts, always black, but screen resets of sleep/resume

  I assume that it is a map graphic/display similar problem that many have had, but I have a dv2626tx which has an intermittent starting problem - completely black screen, no backlight, no post BIOS, no blinking cursor, but him are lit and windows7 starts, he plays the welcome chime that login screen is in place , but its still black. The strange thing is, if I close the lid and sleep it is at that moment, then open it again, it wakes up with the screen, but at a resolution of 1024 x 768 and can not be reset to res (1280 x 800) native only other resolutions are available, brightness cannot be adjusted, cannot add a custom in Nvidia Control Panel tried everything. Device Manager no longer mentions a monitor at all. Tried new graphics drivers, still no good. The fact that I can't see even the bios after when it starts (I tried a bright light on the screen, nothing visible) suggests, it must be material, but then why the display works after I have close the lid and open it again?

  Hello

  modernape wrote:

  If I connect an external monitor to the VGA everything displays properly, the bios post display, screen for connection etc all very well.

  This means that the embedded video is fine.  Access the manufacturer's Web site and download the driver, but do not install it right away.  From the Control Panel, remove the video driver. Reboot the laptop. Now, install the driver that you downloaded.

  Please post your results here.

  Best regards
  ERICO

• Reset password in Vista running VMFusion

  How can I connect to Windows Vista on a Mac under VMWare Fusion when you don't know the password?  Vista has been installed using VMWare Fusion in 9/08.  No password is needed to connect to Windows Vista.  Now in 11/08, after not having used Vista in a few weeks (2 months after installation), it asks me a password that I did not know that I have created.  I tried "*" (without the quotation marks), the VMWare Fusion Easy Install password and several other obvious passwords without success.  Vista requires you to reset your password every 2 months?

  Vista of the message "the user name or password is incorrect".  Trying to reset the password, the password reset Wizard don't ask for a floppy drive when there is no floppy drive on the Mac.

  Is there a way to reset the password without having to re - install Vista?

  socalmagpie wrote:

  I checked the 'others' on the o/s during the installation of the PasswordResetDisc in options of VMWare Fusion.

  You don't have to install anything or create a virtual machine in order to use the tool's password!

  All you need to do is fix the image cd080802.iso to CD/DVD drive of the Vista virtual machine via its settings and start the Virtual Machine Vista from the CD/DVD.

  Consult the help file to see how to assign an ISO Image on CD/DVD the correct VMware Virtual Machine, not one you just created in order to use this tool, which is not necessary and probably why you can even see the virtual hard disk that is correct because as I have already said, it seems that you do not work with the basics correctly the machine virtual on the previous attachment of files and image.

  To start the Virtual Machine after you have attached to the correct virtual machine, you may have some difficulties and you can thank VMware for this because they do not it is easy to start an Image of CD/DVD/ISO after a Virtual Machine is created because the Virtual Machine boots so fast, it is difficult to make appear the Start Menu and you may manually change the .vmx file of the The target VM to either add a delay to change the boot order in the BIOS.

  Take a look at my answer in the following thread for additional information that can hel to allow the start of the Image of CD/DVD/ISO. You can ignore the first paragraph about VMware SCSI drivers because the password reset tool works as is, so you can start reading at "If the Virtual Machine is not boot from the CD/DVD or ISO Image then select the CD-ROM in the Boot Menu." Re: Reinstlling Windows

  > Would it be why it does not recognize the Windows software as a specific device?

  Another interesting element is that I allocated 80 GB of space for VMWare Fusion program.  It is NOT partitioned in Boot Camp.

  Please review the message private as well as the other answers, that I made in this thread.

• WiFi requires reset after sleep

  As soon as my macbook goes to sleep and I wake up, the icon indicates that it is connected to my wifi network, but there is no internet connection until I turn off wifi and then turn it on again - if I do that, it connects perfectly. I've updated to the version the most recent of El Capitan and restarted my computer several times.

  Ditto.  I wish that someone would respond to our question/problem.  I got a MBP this past Christmas and love it, but find this very annoying problem.  My iPad Air, iPhone 5 and Windows 10 laptop Lenovo have no problem to stay connected to the internet on the same wifi network, which makes me want to point the blame on my MBP, not my WiFI router or your internet provider.

• Im having trouble with something called main control center program 3 on my windows vista gateway labtop!

  well, I bought my labtop in jan 2009 since then until now, it works just great! I recentlly downloaded a program that I bought at my school called ADOBE CREATIVE SUITE 4 now, my computer had problems such as programs crashing, not being able to access the internet, and there's a screen that keeps poping up saying windows microsoft control program main centre 3 a work stoppage, does that mean? but I called microsoft tec, support the referd me towards another 1800 number they could not solve my problem yet once refferd to another number which has been a gateway, support center tec I still once they couldn't stop the last question but not less I had another number that was gateway main call center they stated "in order for me to get help I would have to pay. a price of $59.00 for 30 min and 199.00 for a lifetime warranty when all I need is to know how to get this frekin controll Centre 3 thing of my screen! She said it was a virous but a barley used my computer in addition to me lookin upward central control 3 and it does not say that it is a virous.

  ControlCenter3 might be associated with a Brother printer.

  The simplest solution would be to run the system restore and go back to a time before you download ADOBE CREATIVE SUITE 4.  Copy the file downloaded to external media (flash drive, hard drive, CD, DVD) to save it before you restore the system.