Reset the keyboard?

Similar Questions

• Need to reset the keyboard so U do that type 4 and I = 5 O = 6 etc.

  The keys on the right side of my new laptop have a number such as a 10 key and I can't cancel it.  There is a key that says fn that will change i or O or U, but the keyboard is somehow put into permanent with numbers not letters.  HELP please.

  Well, I had the same problem.
  go to hardwhare and reinstall your keyboard

• iPad will not bring the keyboard when I try to complete an external application for internet access

  Hello

  I have a new iPad 2 Air, and very recently he began to refuse to show the keyboard properly, when I am trying to log on to an external internet account. I am traveling and need access to the internet but cannot fill all the required fields, it will bring up the top gray bar with the top and down arrow (they don't do anything, I tried pressing all there) but nothing else, just white space below.

  I have read other blogs and tried to reset the keyboard and things like that but he even let won´t let the keyboard.

  So, I can not get Internet access Login. Please help, I m new to the forum and hope I've filled it out properly... apologies if I've made mistakes here.

  Sorry I haven´t understood my operating system, but when I try to check by going to the software update, it won´t not let me because I Don t have internet.

  I suspect a lot of these errors occurred when I updated to version 9.1 of the software as it is not the only problem I encounter now, however, at this stage, it is the most frustrating.

  Thanks in advance to anyone who can help me.

  Hello Cara, there.

  It looks like that your keyboard is not appearing when it should. I'd leave the applications that are run in which you try to get the keyboard works as well as the application of the parameters:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559

  I think that these apps may simply need to be reset and refreshed. Thank you for using communities of Apple Support, let us know how it goes!

• Reset the hotkeys in Windows 7

  Nice day.

  After installing an application for working with smart cards, I got one problem. This application has created a link on the desktop and assigned the number 1 key as a keyboard shortcut to launch. I disabled this shortcut in the binding properties, but now this key does not work. I tried to assign again for another application and delete the assignment, in vain. I tried a keyboard differrent (to ensure that it is not a hardware problem), another operating system on this PC (to make sure it's a Windows problem), and it works as it should. How can I reset all default shortcut keys without roll back Windows (because the last restore point is about 2 months)?

  Hello Roman,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you want to reset the keyboard shortcuts in Windows 7 system.

  I suggest you to refer to the suggestions of Nikhil Deshpande responded on December 6, 2009 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-do-i-change-the-Windows-7-keyboard-shortcuts/0110d32d-66c0-4ce7-8682-eeb896e80c3f

  You can also check:

  http://Windows.Microsoft.com/en-us/Windows/keyboard-shortcuts#keyboard-shortcuts=Windows-7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• No response from the keys on the keyboard

  I have a Microsoft Wireless Desktop Elite - model 1011 keyboard, just all of a sudden I have no keyboard function, no key is working.  I replaced the battery and still have the same problem.  Help!

  Your keyboard and your mouse Exchange signals wireless with a transponder, which is wired (connected) to a port on your computer. On top of the transponder is a button. Press the button and you should see green blinking lights. No lights means no power is now the transponder or the transponder failed. Assuming that you can see the Green flashing lights then try to reset the keyboard.

  I don't have your model keyboard but look on the underside of the keyboard for a tiny button to the lower right. On my Microsoft keyboard Channel Connect words are next to the button. To reset, you press the Connect button for say 10 seconds while with the other hand, push the button on the transponder.

• Reset the UK keyboard to get £ 3 button

  Somehow, I accidentally activated the normal function of the key no. 3 key + shift to get the sign £ (UK keyboard), but now get to place one # instead.

  I want to use shift, then press the number of the button 3 and get the sign £, as before the accident.

  I know not if I press the ALT key while pressing the key number 3 I get the sign £ or vice versa... #

  Asking how to reset £ on shift + 3...

  You have a flag to the top-right corner of the selection of keyboards for example screen

  

  If you do the UK watch option so that you can switch to him? Otherwise (and/or remove the keyboard layouts you want) try to go into system preferences, and then select keyboard (if you have a flag showing that in the image above, the 'open keyboard preferences' thereon should take you there), tab input methods, you should be able to select the UK keyboard layout and remove keyboard configurations you want

• MacBook pro 2015 stuck in Bluetooth Setup mode after commissioning, recognizes on the keyboard and track pad. SMC reset does not work.

  My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!

  Hello rad trp,.

  Thank you for using communities Support from Apple!

  From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.

  I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.

  Reset the management system (SCM) controller on your Mac - Apple Support

  OS X Yosemite: reset PRAM your computer

  See you soon!

• My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help?

  My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help? I went through properties and all that it is fine. It has something to do with the keyboard and an F key and control or ALT.

  Hi Sashaxwp,

  To get small icons in your Start menu

  Click Start on the taskbar, and then select Properties from the context menu.
  Ensure that the selected option of Start Menu as ist and click Customize to the right of the Start Menu option.
  This will display the Customize Start Menu dialog box.
  Use the Option Select an icon of Sice to Programms and now select small icons

  To configure your display appearance, wants to get small icons on your desktop

  Right click on an open area of the desktop and select Properties.
  Click the appearance tab.
  Click on 'effects' (in my Version of XP in German), perhaps you will need to click on Advanced.

  In my XP there is a "huge symbols" choice, if you have this choice, remove the hook.

  Good luck and have a nice day!

  Kind regards

  Rainer

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• Reset the time-out without clicks or the keyboard input

  Hey all,.
  SO, I have a RFID reader that triggers events in a film's Director. My timeout is set to 2 minutes, but it is possible for the user to never touch the keyboard or touch screen and always in interaction with the program through the RFID interface. How can I reset the timer of the time-out for the program don't timeout in the middle of the activity of the user. I can't find anything in the documentation that says, although it seems that there should be a property that I could put everything back to 0. Like countDownTime or something like that. Any ideas?
  
  -Bruce

  > it seems there should be some
  > property that I could just reset to 0.

  If you use the ' timeout' Manager (and setting of the)
  timeoutLength), try to reset 'timeoutLapsed' to zero when you need to.

• some characters on the keyboard doesn't work don't not after macos sierra installation keys on one side does not not after installing sierra on my mac pro book

  keys on one side does not not after installing sierra on my mac pro book

  Hello dssheorey,

  Thank you for using communities Support from Apple. I have a problem with your keyboard after updating is not what you expect. The good news are the following steps will help to solve your problem and get your keyboard working properly again. First, start by resetting the management system (SCM) controller on your Mac:

  Reset the management system (SCM) controller on your Mac.

  If you still having the problem after resetting the SMC, use safe mode to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Sign in to your account in safe mode and test the issue again. Then restart normally and test again to see if this problem is solved.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  See you soon!

• macOS Sierra installed ok, but the keyboard and mouse freeze after a short use.  Does anyone else have this problem?

  I'm running a MBP 17 "(fin 2011) with CPU i7 2.5 GHz, 16 GB of RAM and an SSD 1 TB for storage."

  El Capitan has worked well and all updates have been applied.

  Sierra (production, not beta) installation went without a hitch.  However, after using Siri and some other applications (which I closed), I opened and used Pages (also just improved).

  After about 15 minutes, the bluetooth mouse has frozen, then froze the built-in trackpad and keyboard.

  I gave her a few minutes in the case where it is clear.  I have consulted the page document to my iPad and it updated on the MBP display.

  Finally he needed a hard reboot with the power button.

  I had to restart twice this way, but was running a different application when he stopped on occasion earlier.

  Anyone had this happen?

  Hello crashsite2,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to maintain your Mac and run as expected and I want to help you get your keyboard and the mouse works again.

  Whenever we see the same behavior with freezing equipment it can help reset the management system (SCM) controller on your Mac.  The control help SMC and regular systems of different hardware and connection on your Mac. Take a look at the article below to know how to reset:

  Reset the management system (SCM) controller on your Mac.

  If the behaviour continues or if you encounter difficulties, the entire community is here to help.
  Best regards

• AppleTV has been paired with the keyboard but now won't do

  My keyboard (mod-A1314) was paired with the AppleTV, I do not use it for a few months and now it won't pair anymore. The Bluetooth shows just the rotation of the pinion turns but never stops. I changed the batteries in the keyboard, but nothing helped.

  What can I do to make this work?

  check that the keyboard still works by connecting to another device, if the device works then reset the Apple TV and the device software update

  Restore your Apple TV to its factory settings - Apple Support

  Update the software on your Apple TV - Apple Support

• IMac, by default, the keyboard

  I use an APPLE Wired Digital keyboard, when I press the key "a" I am me "az", even for the 'q' = 'qs' and 'w' = 'xw', 't' and 'y' (even in the capital) lost. I check again with the new keyboard with the same problem. I checked keyboard settings.

  I launched "Applejack", active disk and permissions (no problem).

  My iMac seems OK, but the only problem with keyboard?

  Reset the SMC 2 or 3 times, if the problem persists after reset then try another USB keyboard and test. If the problem disappeared with the 2nd keyboard then you know the original is defective and must be replaced. Keyboards can and wear out or can be damaged because of the abuse of the owner.

• Any way to fix the keyboard backlight does not not 2011 macbook pro

  No way to fix the keyboard backlight, what does not work, on my macbook pro 2011. El Capitan was installed earlier. I had a gray screen the other day and had to restart in safe mode. That's when the backlight is out. Thank you very much!

  Susie

  1. press the F6 key twice.

  2 reset the SMC and NVRAM.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295