Reset when returning to him slide

Similar Questions

• All new TX resets when you ask him to turn on wireless

  I just bought a brand new TX from Amazon to have in store when my current (two years) must be replaced and tonight, tried to put up just to be sure it works. Unfortunately, when I try to turn on the wifi or do whatever it is in the preferences for wifi, the new unit buzzes and resets. This happened after the sync on my desktop (Vista, Palm Desktop 6.2.2) under the username of my former, which was probably a bad idea, then after a hard reset and synchronization under a new name, and then after a hard reset and no sync. It is better to try to synchronize another computer (XP) with the original supplied software, or do I have a defective unit? All the other things I should try? I don't think I've had this problem with the original unit.

  Hello..  Welcome to the forums of Palm.  If you did a hard reset and not synchronized or whatever it be added to the TX and it is still reset itself then Yes you have a defective unit that needs to be replaced.  Since you just bought it I would return to their replacement.

  Message relates to: Centro (Sprint)

• With the help of A6, must create menu screen which allows the user to click a button creates a branch to other screens and return to the main menu. When returning to the main screen on which button will be gray or inactive.  How can I do this?  I created

  I am trying to imitate a piece of equipment.  I need the user to be able to click on the specific buttons that have the user to another or screens.  After viewing these screens that will be the user to the main screen where the user which buttons were pressed and which still needed to be pressed.  I create buttons image with the 3 States - who has worked except when the user returns to that slide is reset to zero, and if the user does not see the 3rd State of the button.  How can I get this 3rd State of stay after the user returns to the main screen?

  You can not 'keep' a State, that's what I said in my first answer: "you can create an image with that look of '3' State, make it invisible and show it with the same action when a button is triggered. You will need to insert extra that third picture, first hide it out and make it visible to the advanced action, which I explained. I called this additional 'Done_one' image in the example. The three States you're talking about are in a totally different way to Captivate: for down, more and up-state. You can just tell Captivate to keep a low State, it will be down when the button is pressed. Where my explanation of an additional image.

  No need for all the variables. Looks like you have a lot to learn about variables and advanced actions. I don't see another easy way to achieve what you want. It is not so difficult, tons of examples on my blog.

• The USB keyboard lights can not be clarified when return to the system of stand-by

  The LED may light not on, when return to stand-by on Vista32/Vista64 system.

  Steps to follow:

  1. plug the USB keyboard on USB port of the system, make sure that the LED (NumLock, caplock and stop scroll) are States
  2. make the system in stand by
  3. press a button for the system to be back
  4 check the lights (shift caps lock, NumLock, scroll), the lights are off State - has failed. At that time, the caps lock Numlock/function/sroll lock are still usable and normal.

  5. If you click on one of the main (Caps Lock NumLock, locking Sroll), the LEDs will be renewed normally.

  Note1: The question to not happen on Windows XP and Windows 7. The windows vista USB CATC, send a reset signal and do not send lighting LEDs commond once again, but W7/XP don ' have the reset signal.

  Note 2: The question may reduplicate on some keyboards, for example, MS Reclusa Gamiing keyboard (using the Hub IC of Cypress).

  Note3: And we can encounter the problem on the back of hibernation, the LEDs be clarified on, end user must click these buttons to wake up the LEDs.

  You know the rootcase, if it is MS vista limitaion?

  Hi Bluekang,

  Thank you for your message.

  What is the make and model of your computer? Desktop or laptop machine?

  When Stand By resumeing, power settings can sometimes affect the State of the device as it back to normal.

  I recommend that you check your Power Options > Adanced settings > USB suspend setting > disable

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is anyway to prevent reset when you turn to the next article slideshow overlays?

  Hello

  I was trying to find a way to make a backup of sports interactive, and it seemed that the superposition of slideshow would be my best bet. I have a regular support (think of March Madness ones) and I can scroll with the help of creative teams of States of the objects and making an overlay of slide show. The only problem is that the overlay resets when you advance to the next page.

  Is anyway I can prevent these "slide shows" reset?

  If this isn't the case, it would be a viable request?

  -Shawn

  N °

  And Yes, go ahead and file a feature request: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

• Firefox 17.0.7. Display the menu, when you are using extended view (Win7), flickers off when you move the slider to a selection. Reg FF version works fine.

  Using Windows 7, view extended., Firefox 17.0.7

  Firefox menus (file, editing, etc.) and user bookmark lists flicker in and out of visibility when you move the slider to a selection. This happens on the primary display only the second screen. It does not occur on regular product version (23, etc.) and does not occur on any other application.

  We are required to use version 17 on internal business machines.

  Bob Hello, that might be a problem with hardware acceleration - try updating your graphics driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General.

• Put counties reset when a battery is changed?

  I have a late 2008 Macbook.  The battery has been replaced once.  The current cycle number is 814.  The recommended number is 300.  The number of cycle reset when the battery has been replaced a few years ago, or is this cumulative?  I don't remember the county when it was replaced, but it was more than 300.  And a new battery is still available?

  If you install a new battery, the number of cycle will start from the beginning.  It is not cumulative.

  If you battery has 814 cycles on it, I invite you to replace it.  If it starts to develop, it can severely damage your Macbook.

  I can recommend Nupower OWC or batteries Anker.  Avoid bargains on ebay and Amazon.  There are too many issues that will cost you more in the long term.

  Ciao.

• I am suddenly unable to rename folders. Insert the cursor, but it does not respond when I type characters, or even when I hit him back out. Know a simple fix?

  After cropping of a photo with Photoshop I discovered that I was unable to rename.  I soon found out that the same thing is true when I tried to rename main folders in My Documents.  I am able to insert the cursor, but it does not respond when I type characters, or even when I hit him back out.  Know a simple fix?

  Name change is a directory operation.  It would seem that you have read and write access to your directories, but you do not change access.  This highlights a problem with file permissions.  How is 'Simple' the fix depends on which version of Windows you have to a certain extent.

  Windows XP Pro (with "Simple file sharing" turned off) using the security"" tab. When you right-click on a file or a folder and select 'Properties', then click on the 'Security' tab to view and change the permissions.

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Windows XP Home Edition is a bit more complicated.  You can start safe mode and log in as administrator for the 'Security' tab as above, or you can open a command prompt window (start-> Run-> "cmd") and allows you to display the 'cacls' command or change the permissions of files and folders.  You should check that your username has permission to ull 'F' for your records.  Not pretty, but it works.

  CACLS: <> http://technet.microsoft.com/en-us/library/bb490872.aspx >

  HTH,
  JW

• Why my video quality becomes terrible when I bring him to the plot?

  When you use Windows Movie Maker, my quality of video and photo becomes very pixelated and blurry when I drag the story line. The quality of the image and the video are perfect before hand, and I can see fine when I download on WMM. I tried to save it anyway to see if she was going to change, but no, it was always the same.

  I guess just that you run Vista Movie Maker 6
  and not Live Movie Maker?

  The display resolution is reduced when we look at
  the Timeline/Storyboard...this should not affect your
  completed project (especially noticeable seen)
  full screen). If you view the item by selecting it in the
  Part of collections that better, he should look like.

  If your (registered) publication WMV video files are not the
  resolution you expected... you may need to use a Custom
  Profile:

  Personally, I find the following .wmv profile to be
  useful when recording movies.
  Slide show-1024x768WMV9

  Download from the following site...

  Movie Maker - recording movies - custom WMV profile
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Right click / Save target as... drop in the following Vista folder:
  C:\Program Movie Maker\Shared\Profiles
  (you will need to create the profiles folder, if it is not there)
  Profiles customized for Win XP, Movie Maker will work with
  Vista Movie Maker 6.

  The last section of the following article explains how
  Publish (save) by using a custom profile.

  Windows Vista
  Create custom movie settings
  for Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

• my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

  my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

  Hello

  Recuva worked for posters that have been in your same situation here

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  or even return to a previous operating system by using the information in file window.old at the link below

  http://support.Microsoft.com/kb/933168

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• Y at - it a reset or return to the default value of regedit? My os is vista... nobody seems to know how to solve this problem

  I changed some values in my regedit and now, some programs will not open, I do not remember that the values have been changed, there at - it a reset or return to the default value of regedit? My os is vista... nobody seems to know how to solve this problem

  Hello

  Try a restore of the system back to before that you did.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.

• Why image quality is lost when I publish my slide show on a DVD?

  After you have created a slide show big in movie maker, when I go to publish on DVD there is then a BIG loss in the quality of the image, makes me very sad :-(
  Any idea on how to keep the image resolution during the publication on DVD?

  After you have created a slide show big in movie maker, when I go to publish on DVD there is then a BIG loss in the quality of the image, makes me very sad :-(
  Any idea on how to keep the image resolution during the publication on DVD?

  ====================================
  If your (registered) publication WMV video files are not the
  resolution you expected... you may need to use a Custom
  Profile:

  Personally, I find the following .wmv profile to be
  useful when recording movies.
  Slide show-1024x768WMV9

  Download from the following site...

  Movie Maker - economy
  Movies - profiles custom WMV
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Right click / Save target as... drop in the following Vista folder:
  C:\Program Movie Maker\Shared\Profiles
  (you will need to create the profiles folder, if it is not there)
  Profiles customized for Win XP, Movie Maker will work with
  Vista Movie Maker 6.

  The last section of the following article explains how
  Publish (save) by using a custom profile.

  Windows Vista
  Create custom movie settings
  for Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• The images appear tense when played using the slide show in full screen

  The images appear tense when played using the slide show in full screen in Windows Vista Basic. That means that a picture of resolution 1920 x 1200 appears full screen covering although a 1920 x 1080 image seems letterbox in fullscreen. My screen resolution was put to the native resolution of 1920 x 1080. It is clear that this slide show program only keeping the proportions of the image. Earlier this problem wasn't there. I think that the slide show program addresses in such a way that my monitor could have 16:10 display of report resolution l / h. thanks for giving me a solution.

  This happens usually when the image resolution is high.

  Keep your screen resolution of 1024 x 768 and it should work fine.

• Device to reset when you use javaloader to load an application

  When I load an application through javaloader sometimes resets the device and sometimes it doesn't. Can someone tell me why?

  Here is the command line I use: javaloader loads u - TestApplication.cod

  As the reset time is so darn long I would ignore. Can I do something to ensure that the unit does NOT reset when I insert a request?

  Take a look at the KB article.

  -The reason for which reset is required when you upgrade an application

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/What_Is...

  Concerning

  Bika

• BlackBerry Smartphones my BB Torch 9800 stucks when I open the slide

  I have a BlackBerry Torch 9800... When the blade is closed it works fine but when I open the slide the screen stucks or sometimes goes black... And then when I close the slide slowly he starts working in 30 minutes - 1 day... Help needed please

  You dismissed the possible software problem.  You need to get the equipment repaired or replaced.