Residue inside the glass of the camera Z5Premium

Similar Questions

• Photosmart 5510: Brick of power inside the camera moves around

  This support site is just terrible first, been trying to support by email for almost an hour and just because I'm not at home I can't contact anyone because I have no serial number... not cool at all!

  I have a photosmart 5510, I noticed when I plug in the power cord to the rear of the machine, I can feel the brick of power inside move around, in fact, it is totally not installed in place, I never heard a brick power did this before it is inside an electronic device, the thing must be screwed or something.  I wanted to know if it was normal for this machine, or there's something wrong with my machine.

  It works fine, no problem.

  Thank you

  It is normal, because the power inside the Photosmart brick could be removed, in which case the power brick fails.

  • 

  Figure 1. The back of the Photosmart camera.

  Which look just above the power connector, there is a small screw or bolt. When you use a screwdriver then is posible to remove that cover and find the power brick.

  • 

  Figure 2.  How to turn the screwdriver to open the power module.

  Attention: If you want to do this, please first POWER OFF and REMOVE the CABLES from the rear of the Photosmart camera.

  But it is normal that brick inside power moves a bit.

  Hope this information helps you

  * Click the stars KUDOS to say thanks

  * also click on the Solution button if your question is answered.

• BlackBerry Z10 is stuck inside the camera!

  On the z10 blackberry, sometimes you can't get out the camera... for some reason any the shot does not do anything and you're stuck out there. The only way out is by clicking on the photo album and then get out of there!

  BlackBerry z10 is full of bugs!

  Hey everybody. We will all stay on the topic and helps answer that the question has been addressed initially. Thank you! ~

• Correction of the lens and the camera in Camera Raw calibration

  My copies of Camera Raw for Ps CC and the bridge are fully updated and web support documents say that my Olympus E5 is supported by these applications. When I try to activate profile of auto lens corrections in Camera Raw, I get the warning - "unable to automatically locate the lens profile correspondent." Worse still, the drop of decision-makers does not even include Olympus. All my images include EXIF information and all my lenses are produced current Olympus. I do not understand why none of such large manufacturer lenses are supported by Camera Raw when, an app like DxO Optics Pro has profiles for all my lenses.

  Further, there is problem in Camera Raw with 'camera Calibration '. When editing. DNG. TIF and. JPEGs, the camera profile reads correctly 'embedded' for files from Olympus. However, when editing. Files of the ORF the camera profile reads "Adobe Standard" instead of "embedded".

  Is there a solution for these problems? I can't find one on the Adobe Web site.

  Richard Sharp

  Not necessarily problems:

  1. Olympus camera photo/lens combinations have been corrected for distortion inside the camera in ACR for raw and jpeg.  In general, no profile outer lens correction is available.

  2. "embedded" means non-premieres loaded in ACR, usually jpeg images.  "Adobe Standard" is the base profile provided by Adobe, all supported raw formats.  Adobe will also seek to provide the matching profiles camera, that is "neutral", "portrait", etc., for the selected cameras.

  Richard Southworth

• How to create an animated inside the glass globe image

  1. I have managed to place an image inside a glass globe animated, kind of like the bouncing ball. I tried to enlarge the drawing area, but when I play it in my browser it says not enough memory. My little brother built me a new office, I'm picking up the next time I'm in town. If all goes well, that will take care of this issue.

  2. I am wanting to create a story where the camera stays put on the ball and the animation is the character of comics by itself (perhaps typing on glass to come out).

  3. I will try adding text to #1 above "Help".

  If I run the. GIF in my browser and copy the address, it's safe to stick online?

  Lucie

  For anyone to see, the file must be uploaded on a site. No one can see the file on your computer that your firewall protects your computer. If you allow access someone for a malicious purpose could adversely affect your computer.

  Have a character on the ball is considered to be advanced animation. It can be done using the deformation of the puppet, be aware that it may take time and practice to make look it good.

  Rather than increase the canvas use the zoom of the camera or closer to the camera at objects. Then this will not affect the memory as would change the canvas.

• When I open the camera back, there is a small point on the screen. Tjere is no visible scratches on the lens of the camera at the back. There is a scratch on the lens behind the protective glass?

  When the main unit is opened, a little tiny dot appears in the same place on the screen each time at and clicked too photos. There is no visible scratches on the lens of the camera. Could there be one on the lens within the lens glass on top?

  Consider Apple & will replace your unit with a new one if your unit is under warranty

• HP C6180 All in One - how to clean the inside of glass?

  I have an AIO C6180, top of the scanning glass is clean, but the undeneath the strange dust or streaks looming in the analyses. I unscrewed the 4 screws on the top, what else should be removed for it out and clean the bottom or inside this glass? I don't think it can be pryed up at this point with just these 4 screws out, I don't see what other way to remove it or where, there must be a way.

  Please point me in the right direction... Thank you!

  The answer is... do you surgery on it and finally things come off.

  I cleaned the glass, put it back in, screwed it all to the top and the DONE.

• The camera shutter closed unless I'm in the Mode Selfie

  I have an iPhone 5 c to 2014. Some time back (honestly don't know when) I upgraded to iOS 9.3.2 and the new 'carrier' updated. When I've done that my function "flashlight" began to complain of being too hot and does not not (even when it was inside an air-conditioned building.) Then my camera started working 'not' on occasion, in other words, he wasn't reliable - it turns out that what I had was the shutter being closed on the rear camera and when I go to the camera front it will make selfies and selfie-video very well. I've erased everything, back to 'new phone' status and still no camera on the back side so I'm going back to my old restoration (yet 9.3.2 iOS).

  Someone has an idea of what past? I mean, I'm over my 2-year contract with Verizon and now iOS knows I should get my new iPhone 6 + but I really love this monthly phone bill at low prices!

  Ciao, Dave

  You see a black screen or a closed lens

  If you see a closed lens or a black screen when you open the camera app, try the following steps:

  1. Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
  2. Force the application to close, then open the camera again.
  3. Restart your device, and then open the camera again.
  4. If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorized to obtain assistance.

  Apple's Support read here > get help with the camera on your iPhone, iPad or iPod touch - Apple Support

• Black spot on the camera

  When I use the camera, a black dot appears on the right side (when you hold the phone horizontally).

  I took a few pictures, a few minutes before the black spot appeared. West nothing on the lens. There might be a microscopic piece of dust inside, but I HIGHLY doubt it.

  I ve heard from a few people that is probably not a physical defect, but a real question much experimented with iOS 8.

  I m using the latest version of iOS, but they also heard some experience the same problem there.

  Any suggestions?

  just to learn, put the dust on your camera and take a look.., well he cant focus just that close, but you may notice theres no way it is dust! However, if she still something to do with the material, as this would mean that the sensor burned some pixels, but this usually happens only if you cam laser or try to take pictures of real welding close or things like that... If you don't have these bad things to your camera, it could be the connector.

  But it is unlikely, even if I had exactly this problem of connector camera back in the day with my 3gs.

  But just because these newer iDevices use screws to attach the connectors its very unlikely!

  If the restart does not work try a little touched the phone and check if the point changes or even disappears. If who have some influence the sensor may be broken since you have this iphone or this is the connector as I have just said.

  If nothing changes by slapping, etc. shaking your phone you should try to restore your device via itunes

• HP 24-g080na all-in-one: disk lost inside the PC

  I put a dvd in the drive and it should not have been broken in properly because I heard him fall into the machine.
  
  I have no idea how to do to get it out again, (searched forums and found a similar topic in this section, but different model PC instructions so unnecessary!) or if it will do no harm, although it is there :/

  Thanks in advance for any help!

  Hi there @Rebecca89,

  Welcome to the Forums of HP Support!  I understand that a DVD came loose and dropped inside the DVD player or on your computer.  I'm happy to help you with this.

  You can try to remove the DVD drive and see if you can get the disc from the drive, if this is where he is, or open the computer to gain access to the drive if it is in your case.  Please see maintenance and Upgrade Guide that is in several languages, but has illustrations on how to open the case and remove the DVD drive.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• How to turn off the menu of the camera on Satellite A205?

  About a year and a half ago, I bought a laptop Satellite A205-S462. It came with a camera that I never had a use for. I managed to turn off the camera, but the context menu pop still annoyingly when my mouse goes to the left of the screen.
  Can someone tell me how to disable or hide the menu permanently?

  In addition, because I'm not a big fan of the use of memory on the facilities that I don't use, I guess it's a service I need to stop. But which?
  TYIA

  Hello

  Best thing you can do is follow:

  Start the window RUN (Win + R key) and put inside MSCONFIG. When the system configuration window is open, click on the Startup tab. You will find Chicony traybar under Startup items. Delete in front of her box and Camera Assistant Software will be begins not with Vista.

  If you need cam you can start it manually.

  Sorry, but I didn t understand your second question. I hope someone else can help with that.

• How to record the camera images took without a memory card?

  Camera can take some pictures while no card inside.

  Question:
  How to save these images taken by a camera without suitable memory card?
  These images can be transferred to a memory card or no matter what device to a PC?

  Thank you.

  Hi Diano,

  We're sorry, but Sony cameras that do not have an internal memory cannot save pictures taken when there is no inserted memory card. The shutter will come out as if it takes a photo, but it will be automatically deleted after. The buffer of the cameras are just enough to save your system settings and exposure.

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest to your place of residence in the Asia-Pacific region through http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Satellite A60 - impossible to connect the camera via firewire (IEEE)

  Hello

  Have problems with the dv camera connection to
  laptop computer via cardbus IEEE (firewire)
  It seems to be connected, but none noticed and not take at all.

  I think the problem is with the drivers - but what exactly should I install?

  Thank you

  I don't know which cam you use but when the cam is connected and recognized correctly, it will be listed in the Device Manager. So, do you need some software to have access to the material recorded. By using this software you can record the film on the computers HARD drive.

  Later, you can create DVD or do something else. I have more old digital camcorder tape 8 of 8mm inside. I connect the cam with firewire cable too. When the cam is activated, it is recognized and I can copy films of the tape to the computer s portable HARD drive. For this I use Ulead Movie Maker software.

  What exactly do you do with your cam?

• HP deskjet Ink Advantage 2520 h: ink inside the scanner

  Nice day!

  I found my printer having a black ink inside the scanner glass... What can I do? I have to send it to the repair shop? I'm not beacause this species alignment printer and photocopy each page is reflected.

  I appreciate if yor could the answer to my question earlier,

  Thank you in advance.

  Pashneia

  Hello

  Unless you feel trust do the repair yourself, you will need to have it repaired by a third party.

  I have included a link below that will check if your printer is still under warranty.

• RT webservice inside the RT target folder location

  Hello

  Platform: sbRIO 9651, LV2014

  Application: An application that loads the static html Web page. The html page receives digital data to display via a javascript file, that loads data stored in an xml file in the same folder. All these records are kept under "public content" under webservice. I would like to know the actual location of the folder content webservice public in order to make changes to the page through a labview VI .xml. The next time that the html page loading, it will be the new digital values that will be charged.

  

  If any iniside VI the target indicates its location as "home/lvuser/natinst/bin", I guess that the webservice folder location is different. After looking in the folders inside the target (using webDAV), I came across a file "/ var/local/natinst/webservices /' which when accessed through labview to rewrite the xml page, said that the path does not exist."

  Where exactly all the Web service files are located? I would like to get the real path to given to the VI to replace the xml file. There is a webservice.lvws file that is created when a race like startup exe is created. I guess that this file points to the location of the webservice project in the target... ??

  Thank you

  Arya

  I suspect that's not trivial to do. On Windows 7, Web Services are stored in 'C:\ProgramData\National Instruments\WebServices\aws\' and on the inside, there is a folder for each web service you have deployed. The folder name is something like "-'." Inside it is a 'Public' folder that contains my static files. You could try to find the file/folder to get the path. I'm not also sure if LV loads the file into memory when the Web Service Initializes which could mean that it will be not updated. If you redeploy your web service, the file will get replaced if it is deployed by the web service.

  Why not to create a Web Service VI which load its content from a file located some leaves on the other on the sbRIO dynamically and the fate? Then your VI can change the file and the VI of web service can display/output there.