Resize the document with Tables

Similar Questions

• Resize the document

  Hello;

  I use a MacBookPro OS 10.6.4 with CS5 (InDesign version 7)

  I presented a book of 120 pages with a 5 "x 8" format. The preliminary pages, Table of contents, chapter headings and body text, all had policies specific and layout styles. Now, I have the book even for 6 "x 9".

  (1) I tried setting a blank template of 6 x 9 and copy the text through the 5 x 8 document but found a lot of the formatting of 5 x 8 came and it did not work.

  (2) I did 5 x 8 duplicate file and tried to resize the document (file > Document format and page layout > margins and columns) I had the layout > layout adjustment > activate setting layout click on WE but when I made the changes I found text 5 x 8 blocks don't resize properly for 6 x 9.

  What would be the best way to resize a book 5 x 8, 6 x 9, keeping the police styles intact etc., while having blocks of text resize to the new constraints?

  Thank you.

  Marc

  Adjustment of layout depends on the proper use of guides to determine how move or resize objects.

  If you had executives at the margins that they should have been resized correctly size.

  Bob

• find all the documents with a link specific filePath

  Hello

  I am trying to find the name of all the documents with a link specific filePath.

  Before you run this script I need to know that nothing bad is going to pass, so please can someone give me some advice?

  var myFolder = file (' A:\Work in progress/Jake/Indd files / ');
  myDocs var = [];
  var myFiles = myFolder.getFiles("*");

  for (i = 0; i < myFiles.length; i ++) {}
  
  $.writeln (myFiles [i] p:System.NET.mail.MailAddress.DisplayName);
  var doc is myFiles [i] .open ();.
  links documentaries var = doc.links;
  for (j = 0; j < docLinks.length; j ++) {}
  If (docLinks [i] .filePath = 'A:\Work in progress\Jake\Image Links\Aqualimb 100kg\Aqua Limb.eps') {}
  myDocs.push (doc.name)
  }
  doc. Close();
  }

  Try this

  var myFolder = Folder ("A:\Work in progress/Jake/Indd Files/");
  var myDocs=[];
  var myFiles = myFolder.getFiles("*.*");
  for (i=0;i		   

• Cannot open the document with 'failed to load Composition.

  After confronting an error message when posting, I can not re open the document with the message "failed to load composition.

  I desperately need to save this document! are there opportunities to save him?

  the screenshot is here.

  

  This is the error you get when you open the content published on the web. It is a bug, but you can use the fix below.

  Open the publish/web/index_edge.js and remove the "use strict"; statement at the beginning.

  This will fix the problem. We will address this in the next version.

• sign the document with 'Draw my signature' and send it via http-post

  Hello

  I have a pdf document with a signature field. When im opening with AcrobatReader XI, I can sign / Place Signature / draw my signature. I can't 'save a copy '. It works pretty well.

  Now, I place a button in the pdf document to be sent via http post to a given address. When I now open this PDF in the XI AcrobatReader, trying to sign. I can only do this with sign / Place Signature / use a certificate. But there is no way to "draw my signature."

  Did I miss an option to do this? Pls tell me if he has a chance to sign the document with 'Draw my signature' and send it via http-post.

  Or is this part of the concept? When I'm looking for a solution, I found EchoSign electronic signature.

  What is available depends on how the as is put in place. If you include a button with an action of type 'Submit form' and/or reader - enable the form, then e-signature (signature of drawing) will not be available in the player. If the document is compatible player then digitally signing will. So for what you want, do not Reader-enable the document and you can use the submitForm JavaScript method to submit. The site that has the JavaScript documentation was not available at the time I wrote this, but post again if you need help with that.

• Resize the layer with smart filter without affecting the Smart Filter layer appearance

  I made a wax seals on photoshop with lots of embossing, bevelment and a dynamic filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize (Ctr + T) it appears a messgae which reads:

  ______________________________________________

  Adobe Photoshop CS6 extended

  "The dynamic filters applied to the layers contained in this group will be disabled at the temprarily while conversion is in preview. They will be applied after commit the transformation. »

  Ok

  [] Do not show

  ______________________________________________

  I click OK and I resize the layer with free transform, and then press ENTER. The layer is resized, but my smart filter that cretaes affect a shower around the joint is completely distorted.

  How to resize my layer with smart filter without affecting the appearance of dynamic filter of the layer

  Right-click on the name of the layer to smart object in the layers panel to get the menu below. Choose "Convert to Smart Object" to encapsulate the er and its smart filter and Layer Styles within a new KIND that can be resized without appearance changes.

  

• Resize the image with HTML5 Canvas - distortion

  Hi all

  I'm working on a Webworks app where I need to resize an image to upload it to a server. I use JQuery Mobile, the application should run on OS6 and upward. The user can use the camera or select a picture, the power off. The corresponding code is the following:

  function handleOpenedFile(fullPath, blobData) {
                  var image = new Image();
                  image.src=fullPath; //path to image
                  image.onload = function () {
                      var resized = resizeMe(image); // send it to canvas
                      //Do stuff with the DataURL returned from resizeMe()
                  };
          }
  
  function resizeMe(img) {
  
              var canvas = document.createElement('canvas');
              var width = Math.round(img.width / 2);
              var height = Math.round(img.height / 2);
              canvas.width = width;
              canvas.height = height;
              var ctx = canvas.getContext("2d");
              ctx.drawImage(img, 0, 0, width, height);
              return canvas.toDataURL("image/jpeg", 0.8);
          }
  

  I then use the Base64 in the DataURL for download on the server. The images are reduced, but they are truncated. Parts of the image are shifted autour and colors come out strange. It is not scaling in itself than the mess to the top of the picture it comes out garbled if you draw on the canvas without any scaling.

  Does anyone have an idea how to solve this problem or have another suggestion to resize an image for download?

  I managed to solve the problem of resizing for anyone who takes place also in this. Replacement of

  return canvas.toDataURL("image/jpeg", 0.8);
  

  with

  return canvas.toDataURL();
  

  solved the problem with the strange visual artifacts. Returns a picture of resized without any strangeness.

• Problem Word document with table conversion table of contents

  Hello

  I use MS Word 2003 and Acrobat 9 in Windows 7 Ultimate 64 bit.

  I created the manual using Word, I put position (s) with 3 levels deep and created the table of contents in Word.
  It seems as expected. There are titles, subtitles and subtle (3rd level).

  Table of contents in Word works very well. No problem.

  In the PDFMaker options on the Bookmarks tab, I put 1 TOC with 3 levels.
  However, after you convert the entire document in PDF, bookmarks seem very strange.

  They contain only the titles (no subtitles at all), each bookmarked line ends with some number 3, 4 or 5 that I have not idea what it is and these bollmarks point to page table of contents no to the page, they should have.

  
  What is the problem and how can I fix it?

  Thank you

  JAS

  Added:
  I have read a lot of posts with similar problems and tried all of the suggestions posted.
  I tried:

  1.

  Reinstalling Adobe (by removing all of the related files), well I don't have any older versions (and facilities) of Acrobat in this computer.
  2.

  In Adobe PDFMaker uncheck the option "enable accessibility and...» »

  3.

  Set up printer to Adobe PDF

  4.

  In Word > parameters-OCD I ticked the option "use hyperlinks instead of page numbers.

  I also tried in Adobe PDFMaker use not FAKE, but to use 'convert Word headings to bookmarks.
  The result was horrible. Double bookmarks, reverse a lot of bookmarks empty and level 1 level 2 positions (I think that created by blank lines in the charts on the pages).
  Please note that by using the same word headings create TOC without any problem!
  The only plus side was that some of these bookmarks came with correct links.

  

  These bokkmarks were created using "New bookmarks from structure" option in Acrobat (after conversion of the document)

  /JAS

  I recommend that you look at this blog. It guides you through the steps.

  http://blogs.Adobe.com/acrolaw/2011/03/ensuring-that-Word-TOCs-create-hyperlinks-in-Acroba t.

  I hope this helps!

• Cannot move or resize the tablet with pen input panel

  I have a Fujitsu Q550 tablet.  Recently, tablet input panel responds more correctly.  Is no longer, I can move the Panel or resize it with the stylus.  If I connect a mouse and a keyboard to it I can move and resize the input panel by using the mouse.  I can still write in the Panel, I can just change its size or position.  How can I fix?

  I have the answer, that everyone is looking for!

  fixed it, I'm just disappointed that no admins found this first:

  http://support.Microsoft.com/kb/2984930

  Please make sure that it gets stickied as the answer.

  1.) click on "available hotfix download.

  2.) choose your operating system that is affected (7 or Vista)

  3.) enter your email which connect the https may be sent to you

  4.) click on the link in your email to download the executable file from the fix

  5.) check if you have a restore point before installing in case this does not work as expected.

  6 installation.)

  7.) restart the computer as prompted

  8.) fixed! FINALLY. :)

• Is it possible to resize the document, but keep the content proportions?

  With scripts, there are currentDocument.resizeImage () and currentDocument.resizeCanvas (). ResizeImage() method stretches the image. The resizeCanvas() will resize the canvas but not change the size of the image.

  I'm looking to resize the canvas to a new format, but keep the aspect ratio of the content. Is there a way to do this?

  OK, I got it working!

  adjustedWidth = width;

  adjustedHeight = height;

  If (imageAspectRatio > targetAspectRatio) {}

  adjustedHeight = width / imageAspectRatio;

  }

  else {}

  adjustedWidth = height * imageAspectRatio;

  }

  currentDocument.resizeImage (adjustedWidth, adjustedHeight, null, resampleMethod);

  currentDocument.resizeCanvas (width, height, AnchorPosition.MIDDLECENTER);

• What version of Adobe allows you to change the page on some pages orientaion and save the document with just a few of the tours pages?

  What version of Adobe allows you to change the orientation of the page on some pages and save the document (PDF) with only a few of the tours pages?

  Adobe is the name of the company, not the software as many people say. Since you want to know the exact software, it is important to know that.

  Any version of Acrobat Standard or Acrobat Pro to do this. These are commercial software (a cool weather or subscription).  The free Adobe Reader or Acrobat Reader cannot do this.

  Tip: there are two ways to turn the pages; alone will save him.

• Flatten the Document with JavaScript

  Long story short, I want to flatten PDF using JavaScript forms. With a combination of AcroScript and PowerShell, I made many automation which creates filled in advance forms from a CSV file. Now, I want to combine forms generated in a single PDF file (especially if I can eventually print generated both forms daily). Set all fields to read only not avoiding all fields with the same name to replicate with each other. For example, I may have a form field called customerName and PDF forms for each clients John, Mary and Sally. So when I combine all three PDFs there are now three fields in this single document named cusomterName and the value of each field will be John (instead of John, Mary and Sally). Flattening of the document is the only way I can think to avoid this problem. I can do it manually, but I'd like to integrate this into my AcroScripts. How do flatten you a document with AcroScript or if anyone out there has another solution for my situation I'm all ears.

  I use Acrobat Pro XI on Windows. I can't use any kind of cloud solutions due to my employer's strict security restrictions.

  Thanks in advance.

  NVM. Found my answer. For those who also need here, is:

  oProfile var = Preflight.getProfileByName ("flatten annotations and form fields")

  var oThermometer = app.thermometer;

  var myPreflightResult = this.preflight (oProfile, false, oThermometer);

• CC2015: Display the document with its print in Design view style rules

  A style sheet may contain rules that only effects of impression.

  Example:

  @media print {}

  How can I view a document in design mode with these rules, taking effect?

  In other words: I want to display the document as if you choose ' file > print preview "in a browser.

  In the old Version of Dreamweaver, there was a command "View Menu > use Style > Print Media" (I'm not shure which is the name in English, because I use the interface in German).

  Thank you.

  Hello

  I'm sorry to inform that this feature has been deprecated in Dreamweaver CC

  https://helpx.Adobe.com/Dreamweaver/using/the-new-modernized-Dreamweaver-CC-III.HTML#view

  As a work around you can do file > Preview in browser Page and then print from browser to check the preview before printing.

  Concerning

  Vivek

• The document with the hover text

  I have a requirement to post a technical document with javascript features hover in which a ball or text box appears when someone passes on a hard word or phrase.

  See the image below to get an idea of what I'm trying to achieve.

  Can anyone advise a solution?

  Thank you!

  

  http://jQueryUI.com/ToolTip/

• Scripts to insert metadata automatically to the document with the paragraph style

  Hello

  I am trying to find a way to insert automatically the metadata in my document through paragraph style in indesign cs5.5.

  It comes to myDocument title, author name , and description of myDocument.

  Is there anyone who can help me with this project?

  Thank you.

  Place the script at the following location: C:\Program Files\Adobe\Adobe InDesign CS6\Scripts\startup scripts

  If you close it document the script will automatically put the metadata in your indesign file (use ctrl + w or menu-> file-> the option close to close the file)

  Code:

  #targetengine session

  If you want to test the script for your active document, comment on the threshold of another, copy the script to your startup folder

  app.menuActions.itemByName ("Close").eventListeners.add ("beforeInvoke", function()

  {

  myDoc var = app.activeDocument;

  var docTitleText ="";

  var docDescripText ="";

  app.findGrepPreferences = app.changeGrepPreferences = null;

  app.findGrepPreferences.findWhat = '. +';

  found = app.activeDocument.findGrep (true);

  for (j = found.length - 1; j > = 0; j-)

  {

  var foundText = .silence found [j];

  You can set several style of paragraph for the title of the Document

  if(found[j].texts[0].appliedParagraphStyle.Name=="docTitle1")

  {

  docTitleText = found .silence [j];

  }

  of other if(found[j].texts[0].appliedParagraphStyle.name=="docTitle2")

  {

  docTitleText = docTitleText + "" + found .silence [j];

  }

  of other if(found[j].texts[0].appliedParagraphStyle.name=="docTitle3")

  {

  docTitleText = docTitleText + "" + found .silence [j];

  }

  You can define several paragraph of Description of Document style

  of other if(found[j].texts[0].appliedParagraphStyle.name=="docDescription1")

  {

  docDescripText = found .silence [j];

  }

  of other if(found[j].texts[0].appliedParagraphStyle.name=="docDescription2")

  {

  docDescripText = docDescripText + "" + found .silence [j];

  }

  of other if(found[j].texts[0].appliedParagraphStyle.name=="docDescription3")

  {

  docDescripText = docDescripText + "" + found .silence [j];

  }

  }

  with (myDoc.metadataPreferences) {}

  author = "My Name";

  documentTitle = docTitleText;

  Description = docDescripText;

  }

  });

  Vandy