Resize the video Square (before Render or after)

Similar Questions

• By using the system restore before computer restart after updating Windows 10...

  I chose to try the upgrade of Windows 10 on my laptop primary.  Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning.  Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems.    Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward.   After serious soul searching I elected continue to use Windows 7, I don't really like.

  That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10.  I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.

  Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled.   The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.

  This window doesn't go away even after reboot, and I can not "check for Updates".

  Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.

  Thank you for any assistance.

  By using the system restore before computer restart after updating Windows 10...

  Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• Adobe send the encrypted files before, during and after the transmission?

  Adobe send the encrypted files before, during and after the transmission

  Can you explain this?

• Pavilion dv7-6135dx screens on the video driver blue igdpmd64.sys after the platform update KB2670838

  Windows Update has delivered platform update KB2670838 Feb. 27.

  After that, any time I open Internet Explorer, I get a blue screen of death which calls igdpmd64.sys, which is part of the video driver.

  I tried to install the latest video driver HP site was for this machine, even though it is dated as a couple of years.  But he says that I don't have the minimum requirements.   !!??

  I tried a restore point before and everything was fine.

  I let go of the front through the platform Windows Update again and the same problem.

  Now today I have no restore point so I can't go back.

  Because now I am simply not using IE, everything else works fine so far.

  Here are my questions...

  1. is this a known problem of someone else?  Is there an article on the best solution anywhere yet?

  2. suggested approaches to solve this?

  3. How can I get the alternative video drivers to try?

  3A. HP Site latest since this laptop says that it does not meet the min requirements!

  3B. should I even try the following more old?

  3 c. pros and cons of try the drivers of Intel or ATI sites instead of on HP site

  4. If after testing things, if I wanted to reinstall my current driver, how 'save', or protect some how now?  (I think THAT it is the original of the 2011 original installation schedule)

  5. How can I do to reinstall the video driver as 'supplied with the machine', for example since the recovery D: partition?

  6. If I end up having to reinstall Windows, how to do that since the recovery partition?

  Hey cfravel,

  All major issues! Sorry to hear that you use in the blue screens, but you did a good job of troubleshooting. I'll answer the questions in the order that you asked them.

  1 and 2.  Here is a link to the Microsoft Forumwhere there was a similar question. It looks like uninstalling and hiding the implementation update will correct the problem. To uninstall an update,

  • Click Start
  • Program 'type '.
  • Click on programs and features
  • Click View Installed Updates (left)
  • Search for KB2670838.
  • Select this option and click on uninstall.

  To hide the update,

  • Click Start
  • Type "update".
  • Click on Windows Update
  • Click Find updates
  • Click "# important updates available"
  • Search for KB2670838
  • Right-click on it and click on hide (you can always restore hidden updates in the future if you want by clicking on "restore hidden updates" from the main screen of Windows Update.

  3. here is the correct driver for your laptop HP Special Page. I think you're probably already doing it correctly, but just in case. How many times have you tried this driver? Try a couple of times.

  3B. Yes you could certainly try the next previous driver.

  3 c. the drivers coming from Intel or ATI are almost the same driver in most cases. We invite you to try them because they can always be uninstalled. Just, they are not guaranteed to work properly for your specific model.

  4. There are two versions of the driver for your ATI video chip. These and all future versions will still be available on your driver page. Click on the link under the latest driver that says "available versions" for a complete list of all the versions that are never released.

  5. to reinstall the driver of origin or any other original software that is preinstalled on your laptop, you can use HP Recovery Manager.

  • Click Start
  • Type "HP recovery".
  • Click HP Recovery Manager
  • Click re - install the drivers and software.
  • Scroll through the list and select drivers or software to install. These drivers will still be available on your page of driver as well.

  6 here is a link on how to reinstall Windows from the recovery partition. In the links in blue at the top, click on "Recovering from the start (in the system startup) screen". This is a very simple process.

  Please let me know if you have any questions or if these suggestions helped (it could help others with similar issues). I'll keep an eye out for your answer!

• Resize the video without quality loss

  I am facing a problem of video resizing, could someone help me solve this problem.

  I would like to video scale to the size of the content available (size of degree) without distorting the quality like VLC player.

  Here is my code.

  The FLA code:

  import flash.display.StageScaleMode;

  import flash.display.StageAlign;

  import flash.events.Event;

  ////////////////////////////

  var videoMC: MovieClip = new MovieClip ();

  this.addChild (videoMC);

  var videoMgr:VideoManager = VideoManager.getInstance ();

  videoMgr.init ("sampleFile.flv");

  videoMC.addChild (videoMgr);

  // #############

  This tells Flash NOT allow assets globally

  stage.scaleMode = StageScaleMode.NO_SCALE;

  internship. Align = StageAlign.TOP_LEFT;

  need to create a listener to say object when the stage is resized.

  stage.addEventListener (Event.RESIZE, onStageResize);

  setBackground ();

  called when the stage is resized

  function onStageResize (evt: Event)

  {

  setBackground();

  }

  setBackground () function

  {

  determine the Middle

  var middleX = stage.stageWidth / 2;

  var middleY = stage.stageHeight / 2;

  Replace the bkgd in the Middle

  videoMC.x = 0;

  videoMC.y = 0;

  bottom of scale to fit the width and height

  videoMgr.updateVideoSize (stage.stageWidth, stage.stageHeight),

  see if it has grown like horizontally or vertically and adjust other

  to maintain the proportions

  videoMC.scaleX > videoMC.scaleY? videoMC.scaleY = videoMC.scaleX:videoMC.scaleX = videoMC.scaleY;

  }

  // #############

  ------------------------------------------------------------------------------------------ ------------

  AS3 class:

  package

  {

  import flash.display.Sprite;

  import flash.events.AsyncErrorEvent;

  import flash.events.NetStatusEvent;

  import flash.events.SecurityErrorEvent;

  import flash.events.StatusEvent;

  import flash.events.TimerEvent;

  import flash.media.SoundTransform;

  import flash.media.Video;

  import flash.net.NetConnection;

  to import flash.net.NetStream;

  import flash.utils.Timer;

  SerializableAttribute public class videomanager, there extends Sprite

  {

  private static var _instance: videomanager, there;

  private var con: NetConnection;

  private var vStream: NetStream;

  private var video: video;

  private var vWidth: uint;

  private var vHeight: uint;

  private var filePath: String;

  public void videomanager, there (enforce: Singleton)

  {

  }

  Public Shared function getInstance (): videomanager, there

  {

  If (_instance is nothing)

  {

  _instance = new videomanager, there (new Singleton);

  }

  return _instance;

  }

  public void init (path: String, w: uint = 720, h: uint = 480): void

  {

  filePath = path;

  con = new NetConnection ();

  con.addEventListener (NetStatusEvent.NET_STATUS, onNetStatus);

  con.addEventListener (SecurityErrorEvent.SECURITY_ERROR, onNetSecurity);

  con. Connect (null);

  }

  public void updateVideoSize (w: uint, h:uint): void

  {

  vWidth = w;

  vHeight = h;

  //

  Video.Width = vWidth;

  Video.Height = vHeight;

  }

  / * function public playVideo (startFrom: uint): void

  {

  }

  public function pauseVideo (): void

  {

  }*/

  public function resumeVideo (): void

  {

  vStream.togglePause ();

  }

  public function stopVideo (): void

  {

  }

  public function hideVideo (): void

  {

  }

  public void setAudioLevel (val: uint): void

  {

  var sndTrans: SoundTransform = new SoundTransform (val);

  vStream.soundTransform = sndTrans;

  }

  private function connectStream (): void

  {

  vStream = new NetStream (con);

  registerStreamEvents ();

  video = new Video (vWidth, vHeight);

  video.attachNetStream (vStream);

  vStream.play (filePath);

  startPreloader ();

  addChild (video);

  trace (vStream.bytesLoaded + "/" + vStream.bytesTotal);

  }

  private function registerStreamEvents (): void

  {

  vStream.addEventListener (StatusEvent.STATUS, onNetStatus);

  vStream.addEventListener (AsyncErrorEvent.ASYNC_ERROR, onAsyncError);

  }

  private function unRegisterStreamEvents (): void

  {

  vStream.removeEventListener (StatusEvent.STATUS, onNetStatus);

  vStream.removeEventListener (AsyncErrorEvent.ASYNC_ERROR, onAsyncError);

  }

  private function onNetStatus (evt: NetStatusEvent): void

  {

  Switch (evt.info.code)

  {

  case "NetConnection.Connect.Success":

  connectStream();

  break;

  case 'NetStream.Play.Complete ':

  videoPlayComplete ();

  break;

  case "NetStream.Play.StreamNotFound":

  trace ("unable to locate video:" + evt.toString ());

  break;

  }

  }

  private function onNetSecurity (evt: SecurityErrorEvent): void

  {

  trace ("Error occurred in connection." + evt.toString ());

  }

  private function onAsyncError (evt: AsyncErrorEvent): void

  {

  It's handful of mandate

  }

  private function startPreloader (): void

  {

  var TMR: Timer = new Timer (100);

  tmr.addEventListener (TimerEvent.TIMER, checkLoadProgress);

  TMR. Start ();

  }

  private function checkLoadProgress (evt: TimerEvent): void

  {

  trace (vStream.bytesLoaded + "/" + vStream.bytesTotal);

  If (vStream.bytesLoaded is vStream.bytesTotal)

  {

  trace ("slaughter the timer.");

  evt.currentTarget.removeEventListener (TimerEvent.TIMER, checkLoadProgress);

  }

  }

  private function videoPlayComplete (): void

  {

  TODO: Send the event indicating that the video is at the end.

  }

  }

  }

  Friend class Singleton {}

  :

  private function connectStream (): void

  {

  vStream = new NetStream (con);

  registerStreamEvents ();

  video = new Video (vWidth, vHeight);

  Video.Smoothing = true;

  video.attachNetStream (vStream);

  vStream.play (filePath);

  startPreloader ();

  addChild (video);

  trace (vStream.bytesLoaded + "/" + vStream.bytesTotal);

  }

• Is there a way to change the video settings before reinstalling windows?

  I have a screan broken on my laptop, but due to a problem with the BITS and other services associated with windows update.  Is it possible to put BACKS to send videos to my S-Video output and keep it this way when performing the clean install?

  Hello

  Are you able to nothing appears on the screen?

  When you perform a clean install, all your files, settings, and programs will be erased.  You cannot send video files to the S video output via a command prompt. You can
  try to copy the files and send them to an external hard drive using the command prompt.

  See this link for help:
  http://social.msdn.Microsoft.com/forums/en/Windowssearch/thread/6e5eb2ba-ad29-4719-94b9-c99d38ce7697

  You can apply the same procedure to copy the video files on an external hard drive.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Resize the video after cropping?

  I would like to ask if it's possible/how change video size to our point of interest after cropping?
  What it looks like...

  

  Its 480 p and I want to make without these black boards. Im sorry total beginner

  After cropping, nesting the clip and use the movement built on the new nested sequence controls. Or scaling the image and then crop.

• My audio does not sync upward with the video when editing... no not after have exported them.

  So, I use Adobe first Pro CC and it's been great so far. For reason of som I get this problem a lot recently, my voice does not synchronize with the video. I use Audacity to record my voice and my recording software to record sounds in the game. My voice doesn't sync upward with the video DURING editing (no not after export).

  Also, before you save I say "3, 2, 1, record" so I can sync my voice and video, so it's not me being stupid... It is really strange.

  Any help? See you soon.

  First will not work with variable rate, you will need to use a program like Handbrake (for Windows) to convert the first.

• Is there a way to prevent resizing of the video chat?

  When do a video chat with one person, said the person to see my fine video stream, which is 16:9. See display full, and all the text on both sides of the screen. Problem is when some other join in the video chat, Skype is resized or cultures my flow for them and they do not see the entire screen, and they can read the text on the sides more. Is there something I can do or that they can do so that Skype is not resize the video?

  In the case of group video calling, video format will always be 4:3. The screen 16:9 format is not yet supported.

• Resize the popout video

  Hi, for when I'm doing other things at the same time as Skype call (most of the time), is possible to resize the video window popout? This is just a little bit on my screen and would be really good to double the size. B

  # The size is fixed.

• First error Pro all paused the video and showing a snippet of Pepin.

  

  I use cc Premiere Pro with mac iMac (27-inch, late 2012) and MBP 15 mid-2014 they're always showing this screen like the image above.

  When a break from the video, but can show calibrated after I have that replay.

  See the video here: error.mov - Google Drive

  where is the problem since then? Hardware or software, then how to fix
  Hope you help me

  Thank you

  Hatsachai Ma-SAI

  
  

  Have you tried to use the forum search? There was about 50 questions like that.

  See one of the many:

  Help, please! Colors corrupt video after update to El Capitan.

• Can not get the video to fit the link area

  Hiya!

  I'm always quite known Premier Pro and all it's things. I've been playing with it works for a few years and it worked perfectly all the while. But NOW, of all times, I can't encourage them to do what I want.

  I'm trying to get my video to fit the black link area where you watch the video (sorry, I don't know the name...). When I first import it and drag it to my desktop it really swells up and when I try to resize I get black lines around the video.

  I did it happen by chance... once. And because it was an accident, I have NO idea how to do to reproduce. If anyone can help out me that would be great! ~

  I added a photo so you can see what I'm talking about (my accident compared to what I normally get).

  It comes to my accident, and what I'm doing.

  

  This is what happens when I import a video and drag it into the workspace.

  

  And that's what I get when I try to resize the video to fit. See black bars at the top and bottom of the video?

  

  What John said:-However, be sure to make a new sequence of a VIDEO clip that is used in production and not a chart/still image that can radically different sizes and proportions! If your image is not of the program window, click with the right button and choose 'Scale to the chassis' and he will adapt. However, if the proportions are not the same, you can always expect black bars. In this case, use the motion effect and adjust the scale as needed to make it fit the window if need be.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• How to resize the external .swf files?

  Hello

  THA following the code is to resize the video Clips which are on stage. But how can I resize externally. SWF files? I am adding an external .swf file through Gallery_mc.addChild (loader);

  The following code works very well for resizing of video Clips on stage:

  var myStage:Stage = this.stage;

  myStage.scaleMode = StageScaleMode.NO_SCALE;

  myStage.align = StageAlign.TOP_LEFT;

  function initialDisplay(event:Event):void {}

  var swfWidth:int = myStage.stageWidth;

  var swfHeight:int = myStage.stageHeight;

  Gallery_mc. Width = swfWidth;

  Gallery_mc. Height = swfHeight ;}

  addEventListener (Event:ENTER_FRAME, initialDisplay);

  Help, please.

  Thank you.

  It is not supposed to resize an external swf, unless you load it.  If you load, use a complete listener to resize:

  var loader: Loader = new Loader();

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, f);

  Loader.Load (new URLRequest ("swf1.swf"));

  function f(e:Event):void {}

  addChild (loader);

  Loader.Width = Whatever;

  etc.

  }

• El Capitan sign of a sudden in the last days (before and after the upgrade to 10.11.4 too)

  Hello

  El Capitan signed all of a sudden and then requires the password, it occurs usually once a day. This problem started last weekend before spent 10.11.4 and remained after the upgrade).

  I noticed that this happens usually when I play videos with VLC's .flv and the system is unable to show that the video itself only plays the sound, and after a few minutes that she signed all of a sudden. (I have a MacBook Pro (15-inch, mid-2015, retina, 2.5 GHz Intel Core i7))

  You have noticed the same problem?

  I'm looking forward to your kind help, thanks in advance!

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process (WindowServer or loginwindow).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.