Restart now

Similar Questions

• Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now?

  Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? Options are 'yes or no'. Option 'Yes' restarts my computer & the attempts to Firefox, I get the same message. Reboot several times has no effect. The option 'no' closes the file and nothing happens. Running XP Pro version 2002 SP 3. All normal programs have been updated to the current date (Adobe, Java, etc.).

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost

  original title: lost document

  I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost! Any suggestions? A system restore wouldn't work?

  If you have not saved the document before the reboot - and Windows always give a lot of warning before restarting automatically - while the file disappeared.  There is no way to recover; System Restore does apply to system files, not data.

• "The computer must be restarted before upgrade can continue." You want to restart now? »

  This message appears every time that I reboot.  I do not know which update is, but he showed now whenever I started the computer last month.  How can I stop this message from appearing? I use Windows XP.
  See you soon

  Hello

  Every time that you start your computer, you see the following message is displayed:
  The computer must be restarted before upgrade can continue. You want to restart now?
  Your choice is Yes or no. If you click Yes, the computer is forced into a restart, but returns the message. If you click on no, you can work normally.

  QUESTION: You have an Adobe Reader 8 update failure. This update places an entry into a registry RUN key for the application "AdobeUpdater.exe. "AdobeUpdater.exe" application can be found here: C:\Program Files\Fichiers Files\Adobe\Updater5

  If you open these folders and double-click the 'AdobeUpdater.exe' application, you should see the same message as above.

  To check if you need to do workaround, do this first. Open Adobe Reader 8. From the Help menu select find updates. If the program checks the updates and concludes that they are, apply. This can solve the problem. But if you see the same error message after a restart,

  What solution would you suggest for those who also have Acrobat Pro installed? Uninstalling and reinstalling

  Registry key is here:

  Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run.

  Please, right click on run and export to your desktop and save it as back.reg.
  Delete and restart. If the problem has disappeared, open Acrobat, and try to run the update - help-> update

  YOU PACK THE FACE WITH THE STEPS ABOVE, THE QUESTIONS PLEASE FOLLOW:

  Error 'Need to restart the computer', after you run the Adobe Update Manager

  Question

  After you run the Adobe Update Manager, you receive the error message "Need to restart the computer." You receive the error message during all subsequent restarts of the computer.

  Solutions

  Do one or more of the following solutions:

  Solution 1: Delete the file of transaction of AUM.

  Delete the file AUtrans.xml the Documents and Settings\ [username] \Application Data\Adobe\Updater folder.

  Solution 2: Remove the Adobe Updater.exe registry key if it exists.

  Warning: The registry contains information on the system that are critical to your computer and applications. Before editing the registry, be sure to make a backup of it. Adobe provides no support for any problems that result from incorrectly modifying the registry. Adobe strongly recommends that you have experience editing system files before you modify the registry. For more information on the Windows Registry Editor, see your Windows user's guide or contact Microsoft Technical Support.

  To remove the Updater.exe Adobe key:

  1. go to hkey_current_user\\software\\microsoft\\windows\\currentversion\\run.

  2 Select the AdobeUpdater.exe key (if it exists) and then choose the editing command > delete.

  3. click on Yes in the dialog box confirm deleting key.

  Solution 3: Find and remove the AdobeUpdater.rbt file if there is.

  1. choose Start > search.

  2. under what Do you want to Search For, select all files and folders.

  3. in the all or part of the file name box, type: AdobeUpdater.rbt

  4. in the box look in, select your local hard disk.

  5. click on search.

  6 remove the AdobeUpdater.rbt file search results if it is found.

• When you click "Restart now" after Windows Update, the computer stops, does not restart

  When you click "Restart now" to a windows update... the computer cycle throughout the judgment... and not restart.

  * original title - problems with computer restart (ing) after the updates *.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• How to stop Windows Update to take keyboard focus, when you are asked "do you want to restart now?

  Windows Update often wants to restart the computer after an update.  If you say "not now" (or ignore?), he will later pop up a question "reboot now?" in a bubble of task bar.  INCREDIBLY, it will at that time take keyboard focus of everything that happens and then accept what he gets as a response from the user.  This means that if the user was in the middle of typing something, the following sequence of keys will enter the bubble "you want to restart" instead of some request the user was in the middle of the help.  It's very bad.

  Here is what just happened to me.  I was in the middle of typing a document when the keyboard focus was suddenly taken by the issue of recovery, a fraction of a second later, the following combination of keys, he disappeared - I have no idea what hit it.  Fortunately, I saw the flash and guess what had happened and quickly you press 'save' on my request.  A few seconds later, my application has been closed as the machine restarted.

  I think that the bubble of Windows Update SHOULD NOT STEAL the KEYBOARD FOCUS.  I think it's dangerous and bad design.

  What is the best way to communicate this suggestion to the team of Windows Update?

  Is there a setting to stop Windows Update to do this?  (Stop stealing keyboard focus)

  I use Vista Home Premium

  I'm looking for a Microsoft solution for the specific problem I described, and/or advice on where post for better attention to Microsoft to "design problem".

  None of us are obstruction you. If we knew a way to avoid this problem (problem), we would have mentioned it earlier in this thread.

  You aren't the first person to complain about this and I'm sure you won't be the last. According to Microsoft, you have two options:

  1 use an automatic updates setting other Automatic (for example, download updates but let me choose whether to install them). or...

  2. turn off the automatic updates and get your updates manually (which I don't recommend).

  See...

  Windows Update for Windows Vista Help
  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Antivirus installed and restart now constant.

  got a virus so installed norton anti during the audit, that he hung so I rebooted now I get almost to the login screen and it restarts with a short flash of a blue screen. When I tried in safe mode, I get a blue screen with a message that I could have a corrupted file and install, but since I can't charge xp that would be difficult. access to recovery and have done fixboot, chkdsk/p, and bootdfg / r and it detects a bad file but doesn't seem to trouble. did not have a fixmbr because there a clone install so not sure if that would make it useless as it puts warning... try not to reinstall and lose data and software... tks

  nvmarv,
  I suggest to try a repair installation as described in this article.  Or you can perform a parallel installation as explained in the Windows XP Installation Options.  None of these methods will erase the data.  The parallel install Windows to a different folder so that your information will be saved by you will need to reinstall your programs.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I restarted my computer 5 times and I always get a popup that says: "your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? »

  Firefox does not open, but keeps asking me to restart even after I rebooted several times

  I have exactly the problem. Partly because my computer does not allow me to delete the Mozilla Firefox program folder.

• tried to install snow leopard 10.5.8 but he failed and restarted now, I can't start 10.5.8

  I purchased mac snow leopard and tried to install it on my mac-pound aluminum end 2008, it could not install, I clicked on try again, then it restart it. It came with the screen of the language and I thought it was the clean install the way to do it, but I don't want TO REMOVE MY DRIVE because the memories of family, so I have snow leopard of ejection and tried to boot the system back to 10.5.8 but that did not work, it just turned off, so my question is is it possible to install mac snow leopard without deleting all my files, if not any other way to get all the files safe again. Please and thank you. I didn't backup:

  Oh yes and I checked the disk on boot disk utility and nothing on my drive has been deleted and yet if...

• I just made 3 updates and restarted now I can't connect to my computer at all. It does not recognise my fingerprint and I forgot my password.

  I have a HP laptop which is now a paperweight $ 900.   Last week I lost all of my contacts in my address book.

  Hi IndyFly,

  ·         Have you tried restoring the system of my previous post windows recovery mode?

  I suggest you perform a system restore, the windows recovery mode. Reply back with the results.

• When I click "Turn computer" and then click on restart or shut down, nothing happens. No turn off or restart. When a software application asks me to click "Restart now" it works very well. How can I fix?

  All windows updates are installed.
  Analysis of virus and spyware find nothing.
  Reboot, restart cold, don't correct it.

  John S. Muchmore,
  Thanks for posting.  The article below explains in detail with troubleshooting for shutdown problems.
  http://support.Microsoft.com/kb/308029

  Post back with the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• URGENT HELP PLEASE! Windows did an automatic update finished & gave me the Option "restart now or later. I chose Now.A screen from Windows is going down, a startup problem occurred immediately after the installation of updates, this has happened about 9 h

  Windows has finished just do the automatic updates on my Sony Vaio... He said that he should be released on... When it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, safe w/command prompt mode and the last known good configuration "screen... I tried "start windows normally", and last known good configuration, and no matter what I did, it looks like its about to begin, with the 'windows' logo & he says it's the boot process, but then instantly a screen flashes, but too fast for me to read what he says, so I immediately finished fashion splash screen choose again. Whenever I try to get my PC to boot it goes through this again. Exactly... I tried restarting, shutdown PC up to 30 min. waiting & more & again it does the same thing & will NOT start! HELP PLEASE!
  I do not have my current work & News & saved downloads & need help & I timed commitments to people... ASAP PLEASE!
  Thanking you in advance...

  Windows XP logon screen does not appear and the computer continuously restarts
  http://support.Microsoft.com/kb/310396

  Resources to solve startup problems in Windows XP
  http://support.Microsoft.com/kb/308041 TaurArian [MVP] 2005-2010 - Update Services

• Installation MSOprofessional 2010, restarted, now cant connect to user ACCT.

  I downloaded the software and installed according to the instructions.  Installation was successful.  The computer to restart.  I rebooted.  The start screen appears with my logon options two user.  Owner (my account) and family (household).  I had installed in my account user (owner) and when I click on open the acct I received the following message is displayed.   "The service user profile Service has no logon.  User profile cannot be loaded. ' Acct family still works fine.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• To restart now Windows Vista KB971029 stops in a loop

  After installation Update KB971029 installed 3 March 2011, reboot the received message: MS Visual C++ Runtime Library application, rquested the runtime to terminate it in an unusual way, report writer.  After you click OK, reboot continues waiting, then start from the beginning, until it reaches the same point - loops over and over.  Although the journal has shown that it has been installed, it still showed as an update waiting. At one point had the laptop open and KB071029 uninstalled then reinstalled and the computer worked fine for a while.  Tried to open Friday morning March 8, same thing, still cannot start my Toshiba Satellite L300D - 040 under Vista Home Premium with all installed service packs available.  What should I do now?

  Just because "nothing has shown" when you scanned with NAV does NOT mean that the computer has not been infected. Looks like he may have been infected since the incident of online banking services.

  I hope that you have changed your all your passwords (etc.) online banking & credit since then!

• Installed NEWSid, restarted, now I am obliged in the guest account and can't make admin account or change the guest account.

  I had to run NEWSid due to software, I bought and installed (Stardock Objectdock) and required me to restart. Upon reboot, I had the guest account and couldn't change little matter what I tried. Here are things I tried.

  (1) goes UAC and by creating an account admin, but when I put a name in the name field, it tells me I have the invalid text when I do.

  2) restart in safe mode to create the Admin account or change the parameters of control of the accounts in this way and the same thing happens as a #1.

  Reinstall Windows Vista Home Basic 64-Bit 3) compared to the original, which does nothing to help.

  After research, I learned that using NEWSid with Vista causes this problem a lot, but the only solution I found is to use a recovery system disk (the only disc that came with my purchase of the computer has been the Cyberpower restore disc that contains only Windows Vista Home Basic 64-Bit.

  I am at a loss what to do, what I'm in the guest account and can't get out. System Restore did nothing as well until I reinstalled Vista. When I tried to run the system restore, it told me the Volume Shadow service was not working, but as part of the services, it has been set to automatic.

  Hi Rizzano,

   

  Welcome to Microsoft Answers Forums.

  If you are unable to connect to the administrator account, you will be unable to make changes on the computer by using the guest account.

  I think you did an in place upgrade which means it replaces the file system and makes no changes to the user account.

  You try to activate the construction in the administrator account and check if it works.

  If you are able to connect on windows first try to create a new administrator account.

  To activate the built-in Administrator account, follow these steps:

  
  1. click Startand type cmd in the Search boxof start.
  2. in the list of search results, right-click Guest, and then click run as administrator.
  3. When you are prompted by user account control, click continue.
  4. at the command prompt, type net user administrator / Active: Yesand then press ENTER.
  5. type net user administrator , , and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.
  6. type exitand press ENTER.
  7 log off the current user account.

  HOW to: Enable the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910

   

  If the steps above does not resolve the question suggest that you try to restore the system from the mode or using the disk safe.

  To use the Windows recovery environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows recovery environment, follow these steps:

  1.	Insert the installation disc into the disc drive, and then start the computer.
  2.	Press a key when you are prompted.
  3.	Select a language, time and currency and keyboard or input method, and then click on Next.
  4.	Click on your computer repair.
  5.	In the System Recovery Options dialog box, click the operating system you want to repair, and then click on Next.

  In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point created before the problem occurred.

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.