Restart numbers after CS5 previous level

Similar Questions

• How do restart numbering list

  Hello world

  I don't know it's really simple that I don't know, but what I'm trying to do is to restart the numbering after each H2 (in red in the picture) I played around with all the settings and can't get out.

  

  So basically I want to just "3. Read text below... "to actually be #1. I gave them all the same style and it will be a great document to give each set of numbers of their own style is not really realistic (I don't think)

  Any help is appricaited or if you would like more information, just let me know, thanks in advance

  Asher

  EDIT: I was playing around and managed to get the effect I wanted, but I don't know how I did it, and so also the next low level now works it's own system without rebooting so I basically always the same problem. Any help would be great, thanks

  Well so I found / worked on the solution without hacking it (so much), but only with the help of parts of these two ideas that have been suggested so thank you...

  What I had to do was:
  (1) make sure that all styles to consider in the heirachy used the same style of list

  (2) that the style that will act as the level of "resetting" 1 BUT make sure that it doesn't actually show the number (so it's like a hidden level)

  (3) make the style where the numbering begins too level 1 (don't know why but it's what works)

  (4) make the next level of style 2 (I guess this would go on infinitely, but I'm not sure)

  It seems to work great so far but I could not got there with the Sandee & Willi from the start index, thank you so massive. (should I mark this as resolved or something?)

• Update of FF, message says to restart to complete the previous update. I reboot with the same message. Tried to uninstall. Same message, even in Safe Mode.

  I tried to update Firefox and repeatedly getting this message: "your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? "If I click on no, nothing happens." If I click Yes, it restarts and I get the same message all over again. I tried to uninstall the program and get the same message, even in Safe Mode. I tried to start with a configuration of the previous system, but the computer would not give me the dates of previous configuration. I am running XP, and I deleted Internet Explorer, so I can't access the Internet on this computer. I tried to install the update by downloading the upgrade on another computer and transfer it to a flash drive, but I got the same results. If I go to control panel configuration/Add / Remove Programs, it says I have Firefox Version 13.0.1. For about 6 months before this incident, I get a message when I load Firefox, who said that he could not install an update attempt. If I clicked OK, at least he'd still go the old version. Now, he will do even that.

  Hello, the installation of #3 in the initial response folder is referring to the entire directory "C:\Program Files\Mozilla Firefox", not any subfolder or file in particular. If the directory is still present after uninstalling firefox via the windows control panel, and then if it please delete the whole folder "C:\Program Files\Mozilla Firefox" & try reinstalling firefox afterwards.

• Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now?

  Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? Options are 'yes or no'. Option 'Yes' restarts my computer & the attempts to Firefox, I get the same message. Reboot several times has no effect. The option 'no' closes the file and nothing happens. Running XP Pro version 2002 SP 3. All normal programs have been updated to the current date (Adobe, Java, etc.).

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it?

  Wireless

  I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it? Sorry for the bad English.

  Hi Zeljka Djordjevic,

  ·         What program did you delete?

  I suggest to perform a restore of the system and check if the problem persists.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Keyboard shortcut to restart numbering?

  Hey all,.

  During my last project review (1100 pages, hit just to correct stylistic and changed the incorrect file name / title, I had a thought about numbering.)

  After 500 pages or more, it is old having to click the multilevel list button, restart numbering at 1 and apply the style.

  Y at - it a shortcut for setting dial 1 for changes in dialing faster?

  Thank you!

  Unfortunately not. The only thing I can suggest is something like Macro Express where you can automate all kinds of actions.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• I restarted my computer 5 times and I always get a popup that says: "your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? »

  Firefox does not open, but keeps asking me to restart even after I rebooted several times

  I have exactly the problem. Partly because my computer does not allow me to delete the Mozilla Firefox program folder.

• Firefox stuck in an infinite loop to restart to complete the previous update but does nothing. Can uninstall or install the latest version over it. In my view, that the installation files have been erased before reboot by another Installer. How can I f

  Everything I try associated with firefix gets "your computer must be restarted to complete a previous update of Firefox" I tried to not restart no luck, I tired uninstall in Add Remove programs or install 4.0 on it. At the time I was trying to upgrade 3.0 to 3.6.15. I tried to look for the xpicleanup.dat file but no luck there.

  Any suggestions to get firefox back on

  I had the same problem. I deleted a file "firefox.exe.moz" - upgrade directory "C:\Program Files\Mozilla Firefox" and the installation / update of Firefox went on well

• Satellite A200 restarts continuously after Windows update

  Hey all,.

  The model Satellite A200 - 1 GB (PSAE6E) worked perfectly for two years now (with Vista 32-bit).
  Since running windows update yesterday and restart, the laptop summer stuck in a reboot loop, restart immediately after the 'POST' (the Toshiba logo, etc) screen with a flash of blue screen.
  Holding F8 to read the message, it says INACCESSIBLE_BOOT_DEVICE (0x000007B)...
  Try to restore to a point before the blackout failed for an unknown reason (gave an error).
  Search in Google gave a possible cause - maybe the hard disk driver was changed by an incompatible type. There were some suggestions to turn off the AHCI in the bios, but it doesn't have this option.
  The bios was not updated since purchase (this is version 1.4), but I can't update because it seems that the only update provided by Toshiba requires windows.

  Someone has any idea how to fix the computer without having to reinstall windows? No matter what?

  Thanks in advance,
  Ofir

  Hello

  I doubt that it could be a hardware error (my personal opinion) but nothing is impossible, that you know
  The fact is that a BSOD can be caused by hardware error, but also a serious software problem
  In my opinion, something went wrong during the update

  If you are not able to boot the operating system even by using a safe mode then a new install of the OS would be the last chance to get this sort problem

  I think you should try a new installation to see if this could be a hardware problem because there is a small remnant of risk that this could be a hardware problem

• Re: Satellite X 200: Vista restore after format low-level HARD drive

  Hello

  I would like to know if the CD of my Satellite X 200 recovery tools is able to restore my drive after a low-level format?

  Waiting for them, thanks a lot.

  Hello

  The use of the Toshiba Recovery CD would be to format the whole HARD drive and to relocate again the entire image of Toshiba.
  This means that all the operating system Windows Vista, Toshiba drivers, tools and additional software would be installed on your HARD drive 200 X.

  I hope this is the information that you need.

• When you click "Restart now" after Windows Update, the computer stops, does not restart

  When you click "Restart now" to a windows update... the computer cycle throughout the judgment... and not restart.

  * original title - problems with computer restart (ing) after the updates *.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Why my laptop restarts automatically after shut down when connected or not connected

  Hello Sir, I have HP PAVILION DV4 series laptop. I am currently using WINDOWS 7. But since 1 month it appeared the problem, my laptop automatically restarts after you close when it is connected or not connected. After that I end my laptop shut down normally. Any help would be appreciated.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  1. have you made changes on the computer before this problem?

  2 you receive error messages or codes to the computer restarts?

  I suggest you to follow the below methods and check.

  Method 1: perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2: System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  If the question did not resolve, try Method 3.

  Method 3:

  You can view the steps proposed by cavehermitt in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-computer-restarts-automatically-after/daeb457a-3509-4BE9-a85b-2935c8c3e108

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful. Please let us know if you need help with Windows.

• How to make a text field to accept a capital letter has or a number in the position of the first character and only the numbers after that?

  Hi all

  We have a text field in one of our screen in our mobile app. Currently the user can enter alpha numeric characters in this text field.

  It is now that this field should accept a capital letter A or a number in the position of the first character and only the numbers after that.

  Could someone let us know how to do this?

  Thank you.

  Or, how about the substitution of this abstract method in textFilter?

  public boolean validate(character char,
                          AbstractString text
  int position)

• Tandberg 6000 MXP restarts continuously after 1 minute

  Hi all

  I have a Tandberg 6000 MXP. Recently, it restarts continuously after only 1 minute. Anyone facing this problem?

  Please help me.

  Thank you.

  I had something similar happen to me with an EX60. It turns out that there was a problem in the registration information sip with the same information for indoor and outdoor record. Wiped factory reset the problem then reconfigure

  Sent by Cisco Support technique iPad App

• 2 minute delay in the RESTART system after Windows 8 upgrade to 8.1

  After the upgrade to Windows 8.1 I now see a delay in the RESTART function.  After you select the RESTART, the system terminates normally.  The power light stays on, the screen goes into sleep mode, but the system will wait 2 minutes before restarting.  After two minutes, the system appears to start Windows normally (as it does a cold start).  The delay is a uniform period of 2 minutes.

  Update being suspended operations may be something, but it is difficult to say. I did a little research and I see events with ID in the 200 are associated stop (100 are related startup).

  This page deals with the anatomy of the judgment (and use the Performance tool to try to trace issues):

  

  Of your description and reading the information on this page, it looks like that your hangs occur during the KernelShutdown Phase.

  Installation of the Toolkit and the follow-up of decisions are certainly advanced.  Let's just dig a little deeper.  In your registry, be sure that the value is 0 (zero) for the key ClearPageFileAtShutdown registry at this location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management

  
  

  In addition, we were able to test to see if there is a slow unloading kernel mode driver seeing if the same blocking occurs when the closure of the safe mode.  If it is fast (and it's of course better be!), we can try by using the process of elimination to find the culprit.