Restart of updating is not turned off MacBook pro

Similar Questions

• Default configuration restoration changes Windows updates do not turn off the computer

  Step 1 of the 'solution' to this error reads:

  Drag from the upper right of the screen (or if you use a mouse, move the mouse to the upper right of the screen) and then tap or click settings.

  It is impossible to do this step 1 because my computer never stops display failure message to offer a mouse or interactivity, whether... it is in an infinite loop of failure with no way to stop.  Same way as fail-safe after power reset does not work.  There is nothing I can do at all.

  You will then need to repair your computer using a recovery disc or installation media.

  Boot from the media(Instructions are here)

  and then select repair your computer in the first screen that says install now:

  Then follow option 7:

  http://www.eightforums.com/tutorials/4935-startup-options-menu-boot-Windows-8-a.html

  Then troubleshoot > open command prompt, and then type the following:

  Dism /Image:C:\ /Cleanup-Image /RestoreHealth
  

• Error "FAILED TO CONFIGURE UPDATES of SYSYTEM REVENANT of CHANGES DO NOT turn OFF YOUR COMPUTER"

  Respected by all,

  Could someone help me please with the problem. I can't access the windows at all. It has blue screen that says "FAILURE TO CONFIGURE updates SYSYTEM RESTORE CHANGES updated DO NOT turn OFF YOUR COMPUTER" pls help

  You may need to stay on this screen for not more than one hour, if there are serious problems with Windows Update.

  If you can always access your PC after waiting, turn off your PC. Then turn it on, immediately pressing F8 constantly. Once you get a black screen with options, select Safe Mode with the arrow keys and press enter on your keyboard.

  Once Windows finishes loading of files, you can start in safe mode, where you should be able to log on normally. You will notice that the screen resolution has changed, and when you log in, you will see a black desktop computer. This lets you know that you are using safe mode. Once you log on, restart normally.

• Windows installs 3/3 stakes to date "do not turn off your computer.

  Originl title:

  Windows Vista updates

  My laptop does not restart after a recent windows update. All I get is a screen saying "can I install 3 of 3 updates" do not turn off your computer. When it is made 100% it tells me that it restarts. When that happens he tells me it is reinstall 3 3 updates everywhere! When I start my laptop in safe mode, I get the same answer. I'm in a loop.

  Tried to repair after updates by putting in the re - install the windows disc. Even if it will not start at the top.

  Help

  Hello
  1. Are not able to perform you reinstall?
  2. A reinstall succsesfull?
  3. Are not able to launch the start of the disc to perform you reinstall?
  Method 1:
  You can read the following article and check if it solves the problem:
  Windows Update crashes when the download or installation of updates
  http://support.Microsoft.com/kb/2700567
  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  Reference:

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

   
  Method 2:
   

  You can perform a clean boot.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, work step 7: to reset the computer as usual.

  Method 3:

  Temporarily disable the software antivirus (and any other security software) and firewall on the computer as a test and check if this solves the problem.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  Check the disc and see if it helps.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 5:
  Note the number of the Base of knowledge (KB) then go to the Microsoft Download Center and enter the number (KB) Knowledge Base Search updates and download to install them manually.
  
  Microsoft Download Center
   
  I hope this helps!

• My computer is stuck in "configuration updates: stage 3 of 3 0% complete.". Do not turn off your computer. It restarts just over and over again with the same message.

  I have a Dell Inspiron 1525 with Windows Vista, and I have tried the following to fix my endless reboot with the "Configuring updates: stage 3 of 3 0% complete.".  Do not turn off your computer. »

  • I inserted the cd 'Réinstallation DVD Windows Vista', but it won't pop up any kind of prompt for me to do something with it.  I tried putting the cd in what was on the computer and tried leaving him in and restart it - but the cd has no EFFECT.
  • I used the F8 key and I tried the following with no luck: safe mode, safe mode with network, safe mode w / command prompt, enable logging, last known good configuration (Advanced) boot and debug mode.  Most of these options make the monitor off (to make you think he will do something), then it just restarts and did the thing reboot loop again and again.
  • I also tried the repair your computer option to the F8 key.  He asks me to log in as an administrator (but my password does not work).  So, I use the menu drop down and choose the name of my computer and then use my password, and I can connect to "restoration of access options '.  Once I'm in the "System Recovery Options".  I tried the following with no luck: Startup Repair tool, restore the system, Windows complete PC Restore, Windows Memory Diagnostic tool and command prompt.  THE only ONE that I HAVE NOT YET TRIED it IS THE "DELL FACTORY IMAGE RESTORE", it's because I want to try to fix it without losing everything on my hard drive.  Here are the details of the I've tried in the "System Recovery Options".
  • The command prompt says: 32 X:\Windows\system > (I have no idea how to use it, but it's what he says)
  • The memory diagnostic tool reboots the computer, but nothing new happening (just reboot over and over again)
  • In the PC restore full Windows: I tried to put the Windows Vista CD in, but it can not find a valid backup location
  • When I click on the system restore: it is said: "no restore points were created on your computer's system disk.  To create a restore open system protection point.  When I click on the system protection, it is said: "your computer is running in a limited diagnostic State.  If you use the system restore in this limited State, you can't undo the restore operation.  Help topics are not available in this State. "  So I press OK, and I'm back to square one.
  • When I click on startup repair: it says "Startup Repair could not detect a problem.
  • I know there are many many posts on this problem, and I think I've tried all the suggestions on how to solve the problem, but they do not work for me.
  • PLEASE HELP ME!  I need my computer for my college work.  I can't borrow laptop my friend forever!

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Vista screen keeps your stay on configuring updates 3/3 do not turn off the computer, he did this for two days constantly restarting remains at 0% installed

  I have Vista, he stayed on configuring updates stage 3 of 3 0% installed turn computer not power off.  Upon this, he was for two days constantly restarts and staying at 0% installed.

  This article suggests a couple of things you could do:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• Windows 8.1 message 'you could not complete updates, by undoing the changes, do not turn off your computer.

  Greetings,

  I installed updates in my Windows 8.1 partition.  Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours.  I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered.  I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5

  How can I fix this without wiping the Windows partition and lose my software?

  Thank you!

  Have you created a Windows system restore point before the upgrade?

• With this update my computer not turn off. Clears the screen, but this is all about.

  This computer is the new 12-inch mac that came out this spring.when I've updated about a month ago, it would not turn off. I got tired of hold down the b power button to turn it off. I returned it for a back earlier upward. It automatically updated again and here I am in the same disorder. I think I'll just close the lid and stop worrying in this regard.

  Stop your Mac. Use the power button if you wish. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of staff. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

  If the problem comes back after a reboot, you have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find bad.

• Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer

  Hi, I just refreshed my laptop that I got a few drops FPS at random. Initially, it worked fine, but after a while before instaled Norton started to cause me problems. At this time I uninstalled it and when he asked me to computer restatr now, I did. Now I'm stuck with this message window loading. Restart the computer from time to time, but the message is always the same: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer.
  Computer: hp pavilion n006sm
  Operating system: win 8 pre-installed
  At the moment I'm stuck on this window for over an hour and nothing has changed

  Seems that problem solved by itself. As I correctly uninstalled Norton, I just put my automatic updates and restarted my laptop again. He installed the updates with no problem and its working fine. Seems that Norton was really the problem, will keep you informed.

• Windows update failure "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer.

  I try just turn on my computer, and I get a "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer"let it sit and continues just to treat then turn off and back on - only to endlessly repeat the problem.  I can't do anything else that the menu hep access by pressing the F2 key, but I can go anywhere with this option or the other.

  Thank you for your help.

  3Ran

  Hello 3Ran
  Thank you for using Microsoft Vista answers Forum!

  Michael Murphy has provided these steps already; I'll just say it in a different way.

  Because you can't go to your office, I suggest that you start your computer in safe MODE. Next to normal mode, it is a different way to connect to your computer and makes a few changes when the problem.

  HOW TO START YOUR COMPUTER IN SAFE MODE

  1. Restart your computer if it is running.
  2. Press the F8 key after your computer powers initially.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. Up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and press enter.
  6. You should see loading drivers and then Please wait.
  7. You should then be on the Welcome screen.

  Connect to your computer using an account with administrator privileges.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• My computer is stuck in ' configuration updated: step 1 of 3-0% complete.» Do not turn off your computer.

  My computer said there has been updates to install yesterday evening, so I clicked on the stop icon to update. This morning when I turned it, it says "configuration updated: step 1 of 3-0% complete." Do not turn off your computer"but does nothing.

  My computer said there has been updates to install yesterday evening, so I clicked on the stop icon to update. This morning when I turned it, it says "configuration updated: step 1 of 3-0% complete." Do not turn off your computer"but does nothing.

  Hey Janeynflorida

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If that does not fix it try repost in the forum update windows for your updates problem

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Windows Vista stuck on 'if please do not turn off or unplug your machine. Installing Update 1 of the 17... »

  My another Windows Vista machine has been slain on "if it please do not turn off or unplug your machine. Installation of update 1 of 17 "for 4 hours. I need to close because it's my phone and I travel NOW.

  How can I stop the update and close?

  http://support.Microsoft.com/kb/555375>

  It helps those answering questions if you provide:

  What version of windows (32-bit or 64-bit) and service pack level.
  you use what browser (exact version).
  What application or antivirus security suite is installed and your current subscription?
  What third-party firewall
  What anti-malware software can be installed.

  · What are the updates that you try to install on the system?

  If the update has failed then try these steps and check if that helps. I suggest you to let us know the number of KB updates.

  Step 1

  Uninstall the updates failed program and features, follow these steps

  a. open Control Panel from the start menu

  b. Select programs and features

  c. click View installed upgrading

  d. uninstall the update failed

  Step 2:

  Reset the component of windows update and then try to install updates, check if the problem is resolved.

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058>

  Step 3:

  Install the stand-alone package containing the updates. You can download the stand-alone version of the below link with number:http://www.microsoft.com/downloads/en/default.aspx> and check if the problem is resolved.

  For more information click on the link below.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• Windows 7 stuck on 'if please do not turn off or unplug your machine. Installing Update 1 of 39... »

  I installed windows 7, 64-bit on my laptop.  After installation I give shutdown and the message like "if it please do not turn off or unplug your machine. Installing Update 1 of 39... " I kept the laptop for the whole day, but it does not have an update and stuck.  Can't start or restart or I cannot get rid of this screen.  Could someone help me solve this problem.

  Hello
   
  What happens when you force them to restart the computer using the power button?
   
  Remove all external devices and then check if it helps.
   
  Similar question has already spoken here: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/7543beb0-e4a2-495a-810b-a4cea16a29eb
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• "Configuring updates: stage 3 of 3-0% complete.". Do not turn off your computer. "Todays automatically. Update on a Vista 64-bit machine

  The message "configuration updates: stage 3 of 3-0% complete.".  Do not turn off your computer. ' is on my screen for more than 2 hours.  OS 64 bit Vista with automatic updates on the value.  What should I do?

  Hello

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.