Restart the loop to install step 3 of 3

Similar Questions

• Restart the loop during the installation of Windows 7

  I'm trying to install Windows 7 from a dvd (ISO burning). Each time, it gets to the point where it restarts the computer, the installation also restarts. I tried to play with the BIOS order so to delete the DVD right before the computer restarts without result. How to do this?

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to how to replace lost, broken, or missing Microsoft software or hardware on the Microsoft Web site.

  Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• Restart the loop to the installation step 3 of 3

  computer guard reboot have set up 3/3 and completed the same steps again and again

  Ellie,

  give this one a whirl:- http://support.microsoft.com/kb/949358   http://www.anguas.com/?p=47

  If you find the answer to your problem, please let us know!  I hope someone else can benefit from your solution.

• Blue screen error: "your pc has encountered a problem and needs to restart only collecting some information and we will restart for you ' and restart the loop.

  Separated from this thread.

  Mr. Govind,

  My computer had the same problem for three days and at the beginning I thought that someone or something is trying to access my computer because I never had this problem before. The first time it happened that I was watching Netflix and noise emissions became rough as if something was interfering with it. Out of nowhere my computer then blue with the error screen that you indicated above. The next day the same thing happened. Then the third day, the BSOF appeared and I just let it take its course instead of shut down my computer as I did the previous time. While everyone has had an endless loop, my computer was able to restart and works perfectly well. I wonder if there is nothing wrong with my computer and if there are what are the steps I need to take for repair?

  Read the Wiki below, for instructions on how to download and share crash dump files, so we can determine what may have caused your system down.

  How to provide the necessary files.

  Blue Screen of Death, co-signed by ZigZag3143 & JMH3143
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/blue-screen-of-death-BSOD/1939df35-283f-4830-A4DD-e95ee5d8669d

• El Capitan woes. Safe mode, test hardware will not work. Restart the loop, kernal panic. Any sugguestions?

  I have a MacBook Pro 13 "2011 start. He had some OS X Lion when buying.

  Two years later I upgraded to OSX Mavericks.

  
  Less than a week ago, I did an installation CLEAN of El Capitan. Wiped my HD and installed in El Capitan. I did it with a bootable USB key. The installation went well. Throughout these years, I have drive repair/check, repair disk permissions when necessary. I have a 500 gb HDD installed, and I kept it about 200 GB of free most of the time. Before and after the installation of the El Capitan, disk utility has repeatedly demonstrated the hard drive in good condition.

  Last night, I wake my computer from sleep mode, it seemed to be frozen.

  Some applications still running - Google Chrome, VLC.

  Mouse still worked. Any click of mouse or track to effect not anything on the screen.

  I pressed Command-Option-Esc force quit and stop chrome by there for.

  Then I rebooted, went to the screen toolbar and progress apple, but then hung on a blank grey screen for about 7 minutes.

  I stopped him. I disconnected all devices.

  I restarted now down option, same result

  I restarted now pressed D, same result.

  I have reset the NVRAM and MSC with the same result.

  I restarted again and realized account of the progress bar was actually progressing just at an incredibly slow pace. So, I waited, and finally made it back to the login screen. IM speaking 20 minutes more.

  Once I finally got on the desktop - I did another disk check and he said everything was fine with my hard drive.

  I checked the activity monitor and shows nothing cluttering of CPU or memory.

  I emptied the login items (System Preferences > users and accounts > login items) that could be the cause of it.

  I would like to have checked permissions of the drive although I doubt it would have helped, but it seems that El Capitan does not provide this feature in disk utility more?

  I then tried the same thing - restart + hold down D to see if I could launch a kind of diagnosis, something! It remains just started up new connection, but it bit more quickly this time.

  I thought I was clear, but after reboot once more he would go in apple logo/progress bar and then show a weird code on top and then directly to the message ' your computer restarted because of a problem, press any key or wait to continue to '... etc. in various languages. The computer begins to restart once again to do the same.

  I turned it off then reset the PRAM, SMC again.

  I rebooted into recovery mode to check my HARD drive. Well, now for the first time, he tells me theres something wrong with my drive and cannot be resolved. I find it so weird because it worked very well on the Mavericks and Lion for years. I have never had problems - start the system or hard drive related.

  Well it finally helped me get to Apple Hardware Test. Click on "test" and everything seemed to go well up to the mark of 2 min 0 s, thin progress bar froze, trackpad would work, but the mouse would be insensitive by seconds. IM guess that it is a hardware or a disk hard question then? Player's fault? Do not know how to install El Capitan would casue those things...

  If I get a new drive and start all over again, I'll be able to reinstall my programs purchased in the app store? The only thing I have right now is Logic Pro. On a PC right now and not can't find anyway to see my purchase history. Checked apple.com and shows no purchase for 90 days, so I guess I need to check through to iTunes or the mac app store for really?

  Thanks for reading and any help is greatly appreciated.

  App store apps are linked to your Apple ID.  Change the HARD drive will not affect your ability to access these applications.

  It sounds that a new HARD disk is in order.

  Ciao.

• I have to restart the computer before installing other programs?

  When you install a PC I find my self install a program, restarting and doing so over and over again. Is it safe to install a few programs at a time before restart? This would cause problems? A plane ticket, few programs do not ask to reboot once installed, so I usually install a little more to save time and then restart.

  It is better to restart after the installation of all programs before installing more just in case where some files take effect to restart.

  I also always check to make sure that the program that I installed and running before installing more. By doing this, if you have problems, you will know which program is causing the problem.

• Reset a loop counter and restart the calculation

  I have a while loop nested inside a loop for the calculation of a model.

  Lets say that I am on the loop for counter 4. Suppose that I wanted to keep track of the number of iterations on a while loop, and if it exceeded a certain 100, exit say number the while loop.  I do this to avoid my model of computation being blocked somewhere due to optimization problems. Now, I want to restart the loop counter calculations 4.

  Is there a way to do this in labview?

  Well first of all, if you want to start the same program inside loop after it got stuck is going not only to get stuck again creating a permanent loop in the code? Would you not just to go and have some sort of identifier as one of the loops is stuck?

  But I recommend just nesting your while loop inside an another while loop, and then connect the output to the out-while loop to a variable of the while loop inside, so if optimisation did not appear correctly then it simply repeats the inner while loop.

  

  Although I am of my thoughts that you will end up just straight up in a loop permanent if optimization fails the first time.

• my new laptop does not detect the USB for installing the os

  I bought the new laptop hp 15D009TU . I want to install win7 in there. I have OS configuration is USB, but my laptop does not detect my

  USB key... Please solve this problem as soon as possible...

  Hello

  Install the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66210.exe

  Restart the laptop, then install the driver usb 3.0 below.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66211.exe

  DP - K

• Says SP2 installed... but remains in "the loop".

  Hi everyone ive recently in the last week to buy a computer hp laptop with windows Vista Home Basic installed. I ran updates and am stuck in 'the loop' install updates from steps 1 and 2 on 3 went very well, but then when it restarts to configure 3rd party it using continually return to this screen. I did a system restore to an earlier position. I decided to install all updates individually incase it was some conflicts between updates... it worked and they installed everything fine. I then installed sp2 of vista and when I go on my page re-allocated it is said that service pack 2 is installed, but I've calmed down get 'service pack installation part 3 of 3 Please don't turn off your pc blah blah' at startup. can anyone help this?

  Hi Demonofcain,

  Thank you for writing to Microsoft Windows Vista Answers.
   
  It seems after the installation of Service pack 2 for Vista, you get a message stating that the computer is installing Service pack 3 of 3 step, and it appears on every reboot start.
   
  You can try to remove Service pack 2 from the computer and install the stand-alone version of Service pack 3.
   
  To remove Service pack 2 access the link below and follow the steps:
  http://support.Microsoft.com/kb/948537

  To install the stand-alone package of Vista SP2, access the link below and download the file to the desktop. Later, run the installation of Service pack 2 from the office.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
   
  Try disabling the security software and install Service pack 2.
   
  If the problem persists, please respond back with the details:
  Was your computer pre installed with Service pack 1?
  You have a security software on the computer?  If so, the name of manufacturer of security software.
  You have the external devices connected to the computer during the update?
   
   
  Hope that would help us solve the problem.
   
  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot restart after optional updates from Microsoft. Down arrows don't work when in the loop boot selection page

  Went to Microsoft Update and downloaded and installed a few optional upgrades, including one about a driver. After installation, will not restart. Arrive at the page Windows XP will then black screen and then the boot selection list. Is "glued" to the normal startup and arrows don't work for go mode without failure or any other option. He just times down, try to reboot and loop. Help!

  Hello

  Have updates you installed?

  You can check the KB number for the update in the update history:

  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

  Step 1: Unplug the power cable, the keyboard and mouse and then reconnect it back. Now, check if you're able to boot in safe mode (by using the arrow keys) or normal mode. Send back the same.

  Step 2: Alternatively, you can restore the system from the recovery console.

  Reference:
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Update Windows stuck in a loop. Keeps trying to download page 3 of 3, but never does, then restarts and is trying to download. Can't seem to put an end to the loop.

  Update Windows stuck in a loop. Keeps trying to download page 3 of 3, but never does, then restarts and is trying to download. Can't stop the loop to try something else.

  The operating system is Windows Vista.

  I found this as a solution and to share it here, I still have questions, but thinking might help someone.

  Windows Vista and 7 update Reboot Loop Fix

  Symptom: You have a update that is causing Windows Vista or Windows 7, stuck in an infinite loop. The problem usually manifests as a "step 3 of 3:0 % complete...". "followed by a restart which starts at the exact same message, not allowing you to get on your account of connection or a desktop at all. It's a pain, and he doesn't stop, even in Mode without failure or advanced trying last good known Configuration in the start menu.

  Here is the short version for people who know how to get to tools to do this and if run System Restore from the installation DVD does not work: DELETE files

  \Windows\WinSxS\cleanup.XML AND (as applicable)
  

  \Windows\WinSxS\pending.XML and the infinite loop update will be set.

  There are two ways to get the files, you need to delete. The easiest is to start your installation of Windows and the button 'Install now' DVD, click on the link located at the bottom left that says 'Repair your computer' open a command prompt and type:

  del C:\Windows\WinSxS\cleanup.xml

  del C:\Windows\WinSxS\pending.xml

  The other way is to download a live Linux distribution such as the System of Tritech Service (which, unlike Vista or 7 DVD, can be booted from a USB flash drive for computers with no CD/DVD drive such as netbooks), open a command prompt, mount the file system and deleting the files. Assuming that your Windows installation is the first partition on the first hard disk, the following commands in rxvt or a console in the Tritech Service system should work:

  Mount.NTFS - 3 g/dev/sda1/mnt/sda1

  RM /mnt/sda1/Windows/*/cleanup.xml /mnt/sda1/Windows/*/pending.xml

  umount/mnt/sda1

  discount to zero f

  Anyway you do it, this solution will stop the engine update loop reboot and let you return to your computer. You may need to make some corrections, additional or manual updates if you have problems, but unless your login screen and/or the Office should be accessible! Is a very annoying problem and I noticed that Google is looking for things like "stage of vista 3 3 restart" usually only provides information about how to run the system on a Vista DVD restore. Unfortunately, if there is a problem with an update, sometimes the system restore does not work and fail with obscure errors, so this info is vital.

  Maybe it's your last chance to avoid giving to the top and reinstalling Windows, and we always like avoiding relocations!

• Restart the external drive loop

  I'm trying to downgrade an old MacBook 13 inch (unibody), it's current run 10.11, but decided it was too system for the small laptop. Swap on the HD for those who had 10.5 and it would just keep restarting. I tried even to remove the HD and reboot only with the 10.2 installation disc and it would always be in the loop. Only time where it works properly is with 10.11 back in HD.

  It's very unusual, because I have no memory of this never happens with other OS.

  You need the original Installer 1 disc that came with the computer or a 10.6.3 retail DVD of Snow Leopard. Then follow these instructions:

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

  You can now switch to any version of Mac OS X that you have already downloaded from the App Store. They must appear on the purchase page of the App Store when you connect using the Apple ID used when downloading of their origin. Your model is the first of its kind to run Lion or later. You can stay with Snow Leopard for best performance. However, the model is quite able to run than el Capitan provided that it has enough memory installed - at least 4 GB.

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• Windows Vista is stuck in the loop of update, install update 3 of 3, 0% complete.

  I don't have a Vista CD and I can not function in safe mode because it continues to bring back me to the loop. Please notify.

  Hello

  1. you made any hardware or software changes to the computer?

  2. which update is installed?

  3. have you started the installation of updates?

  You can try the troubleshooting provided in the link steps to solve the problem.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: If the steps above do not work, you will need to contact your hardware manufacturer.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.