Restart the system or BSOD on startup

Similar Questions

• Restart the system on behalf of closure after the security update.

  I am getting error below, so that the closing of the system. To restart the system if am selected stop. What happens after windows updates. Windows automatic updating is turned on. I use windows xp media Center 2005.

  After I am disabled: restart automatically at startup and recovery - system failure option.

  Stop: c000021a {fatal system error}.

  The windows logon system process terminated unexpectedly with the State 0x000000 (0x00000000 0x00000000) the system has been shut down.

  Can someone help me?

  Hi Christophe,

  · What is the service pack installed?

  Follow the steps in the links that contains information about the cause of the error and the resolution for the same below:

  Windows XP Shut Down and auto-restart issues:http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx

  Advanced Troubleshooting for shutdown problems in Windows XP:http://support.microsoft.com/kb/308029

  How to solve an error "STOP 0xC000021A":http://support.microsoft.com/kb/156669

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• To get on the internet I have to re - configure the NIC or restart the system

  To get on the internet I have to re - configure the network card or restart the system. My os is Vista 32 bit. How can I fix this so I can do things on the internet.

  I use Internet Explorer 9

  Hello

  You may need to update the network card with the latest drivers from the manufacturer's website.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-adapter-problems

• I did the update of windows, and there was a lot of mistakes. I then tried to restart the system, and it is said that acro32.exe is it prevents to close?

  Original title: acro32.exe

  I did the update of windows, and there was a lot of mistakes. I then tried to restart the system, and it is said that acro32.exe is he keep awake. What is and how to fix it?

  If you really see a message about "acro32.exe" is probably malware you should scan your computer with the virus eset online scanner and then download, update and run the free version of MalwareBytes AntiMalware.

  If, as is most likely, the message concerns AcroRd32.exe, the main executable file of Adobe Reader.  Go to control panel > programs and features and uninstall Adobe Reader.  If you have problems uninstalling Adobe Reader, see--> http://labs.adobe.com/downloads/acrobatcleaner.html

  Assuming that things patches, install Foxit Reader (free) instead--> http://www.foxitsoftware.com/Secure_PDF_Reader/

  Or, if you really want Adobe Reader back, go here--> https://get.adobe.com/reader/ (remember to uncheck the box to install McAfee Security Scan or any other 'add-on free")

• Can auto start an application after restarting the system?

  Hello world

  I can't find a way to the automatic launching application after restarting the system about BB10. But he supports on OS5, 6 and 7.

  Anyone has any ideas on this subject on BB10?

  Noah

  To come support "app without a head" (https://developer.blackberry.com/native/download/roadmap/) , at some point, will provide a feature like that apparently.

  When we see, and if it will be in the first version of this capacity, must be announced by BlackBerry.

• Failed to create task scheduler to restart the system automatically within the given interval

  Dear experts,

  I have two accounts on my computer. One was a Director and another was normal user. but the two users are protected by Word.

  When I log in as normal user, how can I set a task in the Scheduler to restart the computer once every 6 hours.

  Thank you

  KP Swamy

  Hello PK Swamy.

  Welcome to the Microsoft Community Forum.

  The Task Scheduler service lets you perform tasks on a chosen computer automated. With this service, you can program any program to run at a convenient time for you, or when a specific event occurs. Task Scheduler monitors the time criteria or the event that you choose and execute the task when these criteria are met.

  I understand that you are not able to create the Task Scheduler to restart the system. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the following steps to create the Task Scheduler:

  1. click on start, type taskschd.msc in the start search box and press enter (it will launch the Task Scheduler).

  Note: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation and click Ok.

  2 left click in the right pane on the Task Scheduler Library > open Action in main menu > new folder > name MyTasks > click Ok.

  3. left-click on the MyTasks > menu, choose Action > create a basic task (it open Assistant tasks).

  4. you can enter the name , for example "restart" and click on Next.

  5. in the trigger section, you can specify when you want to run your task, for example:

  a. Select daily and the press Next.

  b. now you can specify the day, time and all reproduce on a daily basis, after the press Next.

  6. in the Action section, you can choose what you want to run, for example, restart your system to do this:

  a. choose start a program and press on Next.

  b. in the field program/script , type shutdown /r and click on Next.

  7. click on end.

  Check out the link:

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows/schedule-task#1TC=Windows-7

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Deleted some files in the windows directory a few reasons, after restarting the system. showing a victim of COUNTERFEIT windows. How to reactivate my windows?

  Hi all

  I bought Lenovo laptop 10 months before staple. Today in my system, a malicious program "Progressive Protection system" is automatically installed. As a result, I searched the Internet and deleted some files in windows directory in C drive. Now after restarting the system, it's popping up a message stating "you are a victim of counterfeit windows. Even I have validated my window in internet with options available always is saying that my window is not genuine. Don't know how to turn it back on. If someone can help with this problem?

  I suspect that the problem is that the malware is still present - a repair installation will not get rid of it.

  @Prad_121

  Please follow the directions for the RDO and run the analysis offline so you can - at least, so we can be reasonably sure that the machine is free of malware.

  Once completed, please post a new report MGADiag.

• restart the system after bootscreen

  I recently installed windows vista Ultimate edition and system keeps restarting and it gives me the same error "failed to start windows." A recent hardware or software could be the cause. to repair... »
  I mention that I installed windows on a different computer that mine wouldn't let me. On the other computer, everything works fine, but on mine it keeps restarting. What should I do?

  A Vista license is an Installation of Vista.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Restarting the system se...

  I have a windows7 professional, Intel (r) Core i3 540 CPU to 3.07 GHz... 4BG RAM (2.87 GB usable)..., 32 bit OS...
  In fact my RAM was only 2 GB in the generation I pass it to an another 2 GB so it's 4 GB.
  After that I installed this new RAM my system (after 3 weeks) it restarts by itself... and Disconnections... Then, I read a few post and upgrade-shaped graphics driver Intel... But the problem never solved... and today it restarts again with the error that "display driver stopped responding and has recovered" (Display driver drivers Accelerator graphic Intel(r) for Windows 7 not responding and was recovered)... "."
  Please help me...

  The error message you are seeing is called a TDR error and while he points to the display driver
  This is not necessarily the cause of the error. It may just be the display driver crashed as a result
  anything else.

  As you add new RAM for the system, it would be the first person on my list.
  Other options would be if you have also installed new software or making other changes in the
  same period of time.
  If the new RAM is not the same make and model, or does not have the same specifications
  (power, speed and latency - appearing on the label) that the original, there may be conflicts.
  Try to remove the two sticks again and see if you get always BSOD or TDR.

  EDIT: Do not use a search program driver as suggested below. In addition to not be necessary

  many of the free versions install spyware.

  With laptops, the best place to download drivers for motherboard and graphics is the mfg web site.

  .

• ASM does not start after you restart the system.

  OS = Linux 5
  Grid = 11 GR 2
  
  I've successfully installed grid for a stand-alone server. However, after I restarted the server and commissioning upward the clusterware (crsctl start has), I got the following error message when you try to start ASM
  
  sqlplus / as sysasm
  SQL > startup
  ORA-27154: post/wait create failed
  ORA-27300: OS dependent operating system: semget failed with status: 28
  ORA-27301: OS error: no space is available on the device
  ORA-27302: an error occurred at: sskgpsemsper

  kernel semaphore seems insufficient, increase last kernel.sem value in /etc/sysctl.conf and try to run to the top of the DSO.

  REF the link to follow the steps below:

  http://blog.ronnyegner-consulting.de/2011/04/11/ora-27154-postwait-create-failed-ora-27301-OS-failure-message-no-space-left-on-device-when-starting-ASM-or-database-instance/

• CSSD was able to start after restarting the system

  I installed oracle11gr2 on Solaris Opteron, after the system restarts, asm instance started.
  SQL > startup
  ORA-01078: failure in the treatment of system settings
  ORA-29701: unable to connect to the Cluster Synchronization Service
  
  When I run $ORACLE_HOME/grid/root.sh as root:
  ......
  CRS is already configured on this node for crshome = 1
  Cannot configure two instances CRS on the same cluster.
  Please Unconfigure before proceeding with the configuration of the new House.
  
  How to unconfigure?
  
  ARO

  Good, your ASM is running. The next step is to make visible disks to ASM. ASM uses a string parameter of discovery to find the drive, and as you can imagine, they should be there. In addition they should be owned by oracle user and group dba so that ASM can mount them.

• Windows Update will automatically restart the system

  After I install updates to Windows 7, I have to restart my system. The computer is done automatically. How permanently disable this? I don't like that gives Windows me a "choice" to postpone the restart - if I'm away from the machine, then I have no way to stop that and I lost all the data that I had and all the screens I look at one. I'm an adult; I can make my own choices on when I need to restart. Now I get more than 16 hours of work on a project because Microsoft thought that I was a child and could not take decisions for me.

  How to disable auto restart continuously after updates?

  To update manually instead (this means that you need to remember to update your computer when it is convenient to you - also know that you can not be protected against the latest security threats until you update)-
  http://Windows.Microsoft.com/en-AU/Windows7/turn-automatic-updating-on-or-off TaurArian [MVP] 2005-2010 - Update Services

• XP hang on to the restoration of the system during installation error: no changes have been made to your computer to choose another restore point restart the system restore

  Original title: XP hang up to the restoration of the system during the installation

  During the configuration of the system in the process of getting XP to hung up on the screen of the system restore

  The message says:
  No changes have been made to your computer
  To choose another restore point, restart System Restore
  To restart System Restore, click Home
  The jury of the mouse and the button doesn't work so I can't click Home tab
  Help

  Hello

  Why you try to run the system restore?

  Step 1: Check if you are able to complete the restore of the system in safe mode.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  For more information, please see the following article.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• Try to get the Group Policy settings to apply without the need to restart the system

  Original title: problem using Windows policies

  Hi all

  I work with Windows computer local policies to restrict access to usb storage, especially, I'm inside the GPO edit and I change the setting: Local computer--> model Administration--> system--> peripheral access removable--> all removable storage classes: deny all access
  (I have the Italian version, so may be, my translation is not perfect)

  My problem is this: I have to restart the computer to see the changes take place. I tried to run "GPUPDATE/force", but no way: the policy starts to not work after restarting the computer.
  Where I'm wrong?

  In Windows 7, everything works fine with GPUPDATE/force

  I am using Microsoft Windows VISTA Ultimate SP2 32 bit

  Thanks in advance
  Andrea Urbani

  Hi Andrea Urbani,

  You can see the following article in the Microsoft Knowledge Base and check if the problem still persists.

  Error occurs when you run the "gpupdate/force" command on a computer that is running Windows Vista: "user policy could not be updated successfully."

  http://support.Microsoft.com/kb/934907

  You can also check the support options for additional international sites can be found by following the link below:

   

  http://support.Microsoft.com/common/international.aspx

  Let us know if this information useful.

• No installation of software or driver will disappear after restarting the system.

  I have one of my uncle he has reinstalled the window 7 and I tried to reinstall the webcam driver but when it asks to restart.

  -Done reboot.

  -Creative webcam Center vanish along with the driver from Device Manager.

  @@As her doesn't matter it what software install happens.  I don't know if it's something to do with the registry key or OS issue.

  He is the administrator of the computer. I don't know what to do here.  He have also installed ccleaner.

  Nevermind I found the problem.

  It's called deepfreeze software has been installed with will restore the computer to the way it was after the system restarts.

  Thank you.