No installation of software or driver will disappear after restarting the system.

Similar Questions

• Hard drive partitioned using its missing data after restarting the system, sharing and management of the computer

  Hello

  I have a Toshiba Satellite with Vista and since my laptop came with only a single 250 GB, i.e. C:\ partition I tried to partition more than I did the following, I had about 90 GB of data to start with which I transferred to a portable hard drive then:

  Panel--> Admin Tools--> computer management--> management disk storage--> right click C:\ Drive and reduce volume--> it showed only 50 GB of space heat shrink and I created a new volume with this space (F:\ 50 GB)--> transferred all the files to the new 50 GB portable HD space F:\ and remaining 40 GB on the drive C:\

  When I started my computer after a few hours, the new partition F:\ was missing! In addition, there was only the C:\ drive of origin with 40 GB data that I had transferred + 45 GB of data I think it was there previously because the installed files.

  C:\ was so now 40 + 45 = 85 GB without a trace of the 50 GB of data on the new partition I created!

  I had recovered my system to a day before before I did it, it could be the reason? Now, when I try to go to System Recovery it does me not an option for a restoration of watch system.

  To be sure, I now have a backup of the 40 GB of data from the C: drive, but I lost the data of 50 GB of the new partition, and since I have not written new data on the drive is possible that it's still there?

  When I try to search for some files I know research shows me the name of the file, but the file does not open, and the location of the file shows that it is not accessible.

  Kindly advise me on what can be done given that 50 GB of data is really important.

  Thank you

  Go to disk management and open it in full screen and then press the PrtScr button.  Go to start / all programs / Accessories / Paint and open the program.  Go to Edition and click on paste.  Then go to file and click on save as and select a .jpg file type and call the disk management and save it to your desktop.

  Then go to http://skydrive.live.com/ (you will have to perhaps sign up and maybe download some programs, but this will give you a free online place where you can store files for others.  Once the page to the top, click on add files and navigate to the file you just save it on your desktop and add it to one of the folders (I suggest the Public folder).  Once it clicked, and information about it will appear at the bottom right, including where exactly the file.  Copy this URL and include it in your next post.  I would like to see what looks like disk management without asking a thousand questions to describe everythhing for me.

  If you did a restore of the system already on the previous day, there is probably no new restore points created since then, so there is no option to do a system restore.  In addition, a system restore would not solve this problem - this is way beyond its capabiliities.

  Download the free EASUS Partition Manager: http://www.partition-tool.com/ and run it to scan your drive and see if it finds anything Disk Manager can not - it "s possible he can pick up our lost F:\ partition or unidentified space which could be this partition but not correctly identified.  In a same, t I would like to see if it detects anything useful (and it can also be useful the fixing of the problem if we can find it).  Moreover, the total space of the C:\ drive is now is what it was before you have shrunk or it it showing the size reduction that you can expect if the new volume had actually been created?  Let me know what you find if anything.

  Right-click on your CD-ROM drive, and then click on change drive letter and paths.  Click on edit and then right click on the drop box for the available letters.  F shows as available or is missing in the list?  Leave it (don't change anything in reality - I just wanted to see if F has shown as available since if it was assigned (such as C: is assigned) should not be shown at the top on the list.)  I would like to know if he was there.

  I hope this helps or at least gives us some clues on how to solve the problem (whatever it is).   Keep me informed.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Custom printer form disappears after restart the computer.

  Hi, I have a problem when I need to create shape size custom made every day once the computer restarts to print on my matrix printer. description of format custom: 4.5 height 1.5 in. in width.

  My computer running on Windows 7 Professional with the new Panasonic KX-P1121E connected via the USB Port.

  I formatted computer once installed with Trend Micro Antivirus. Is there a solution to the change in the management of printing where new forms can be change to built in either user-defined type? Maybe it'll work?

  I read a lot of discussion and reading forums but no solution. If microsoft is able to help me on this would be much Grateful. thx a lot.

  Hello

   
  When you make these changes?
   
  I suggest you try these methoods and check.
   
  Method 1:
  Change the settings through the application you are trying to print from if you don't need the size for a single project. Change the settings in the section printer and fax devices and printers of method if you need to print a certain size of default letter. I suggest that you try the following steps and check.
  a. click Start, open Control Panel.
  b. open devices and printers.
  c. Select the printer, click the printer server properties.
  d. check to create a form.
  e. to make changes, and then click Save form.
  f. click apply and ok.
  
  Method 2:
  
  I suggest to keep the computer in a clean boot state and check the status of the issue.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.microsoft.com/kb/929135.
  Note: Please see 7 step the computer to a normal startup Dungeon upward after the problem is resolved.

• CD drive icons disappeared after I installed the Norton Recovery tool

  Original title: My CD drive icons disappeared after I installed the Norton Recovery tool

  I downloaded Norton Recovery tool, created the rebootable disc. Tested, everything OK. Then found all my readers of DVD disc including a player clone of Ebly, disappeared from "My Computer". They are always in my device manager, but have a yellow tag attached to each of them.
  Can someone tell me how to get back them?

  Good... got to step 5, then got confused (never been here before). Are you telling me to delete point 4, 4 d 36965 - etc? Or lower and upper values in mentioned in step 5

  Locate and then click the following registry subkey: this will expand the content of the key in the right pane of Regedit.

  
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  
  In panel right, if you have UpperFilters, right-click UpperFiltersand then click Remove.

  Click Yes to confirm the deletion of the UpperFilters registry entry.

  In the right pane, if you LowerFilters, click LowerFilters, and then click Remove.

  Click Yes to confirm the deletion of the LowerFilters registry entry.

  Exit the registry editor and restart the computer.

• I want to Exchange my hard drive of my iMac for one SSD. Existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Oh, I of course put the whole issue in the reference line.

  I'll repeat it here.

  I want to Exchange my hard drive of my iMac for one SSD. The existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Thanks, Thomas

  Transfer facilities of Adobe does not normally operate.  You must reinstall using installation files.  At a minimum you must disable, but you may find that you need to uninstall and reinstall.

• IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  < re-titled by host >

  I moved my iPhoto on an external hard drive.

  Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

  How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

  IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

  I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

  IPhoto is suspended without doing anything, when you launch?

  What version of iPhoto does? And what version of Mac OS X?

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  When you ask a question you will need to provide some basic information

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

• Satellite L650D Webcam driver open fail. Restart the computer or the camera

  Hello, I did a clean install of windows 7 x64bit installed the driver for the webcam, but I can not use my camera I have Webcam driver open fail. Restart the unit photo or computer... can someone help me?

  Hello

  I think the problem is the new facility
  You must install the VAP (value added package) first more I recommend to choose the latest version of the driver/software webcam
  In the driver Satellite L770D download area you can find the Webcam driver v 2.0.0.21 for Win7 64 bit

• Windows could not complete the installation. To install Windows on this computer, restart the installation

  Decided to reinstall Vista business after that my lenovo x 200 could not start. After you have reinstalled, had to restart and now it appears

  "Windows is unable to complete the installation. To install Windows on this computer, restart the installation.
  How should I solve this problem?

  Hello

  1. may I know the exact error you received during initialization failed prior to relocation?

  2. do you know the exact reason for the failure of start?

  I will be asked to get in touch with the manufacturer of the system on this issue.

  Installation and reinstallation of Windows Vista, you can fallow the article below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3

• PC separations with 0xc01a001d after restarting the installation of SP1

  Help please! I installed Vista service pack 1 last nyt via windows update and after installation to restart received the following message;

  PC stops with 0xc01a001d after restarting the installation of SP1... system proven recovery and system restore but nothing helped! I am now reinstall visat using the recovery CD, but will have lost all the data, not great! Why has this happened? I am now very reluctant to reinstall SP1 don't want another weekend busy trying to re-vive my laptop!

  Please advise...

  Thank you!

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  The adobe reader program no longer exist in my C drive.

  I use windows 8 and tried reinstalling countless times, disable the anti-virus, restarted my computer, etc.. Have also tried uninstall adobe, but the program does not exist more...

  Please help because my exams are in 5 days and all my study material must be opened with pdf!

  Thanks in advance.

  Hi, Fabien,

  Is - this directory exists on your system? -C:\Program Files (x 86) \Adobe If Yes, do you think that Adobe Reader folder in there?

  Please use the tool on your system: http://labs.adobe.com/downloads/acrobatcleaner.html

  Reinstall Acrobat Reader DC on your system? Adobe - Adobe Acrobat Reader DC Distribution

  Kind regards
  Rahul Tyagi

• get this error, "one of the software components required,"ms_lbfo"is missing in the system. Please make sure that you use a Server SKU, and no OS components have been uninstalled

  Original title: Windows Server NIC 2016

  Im trying to set up the consolidation of network cards on Technical preview of windows server 2016 3, build 10537 and I get this error message, "one of the software components required,"ms_lbfo"is missing in the system. Please make sure that you use a Server SKU, and no OS components have been uninstalled. »

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• When I start elements 13 thought that an update is available.  I told it to install.  It behaves as if the installation.  I close/close, but whenever I restart the same thing happens.  What gives?

  When I start elements 13 thought that an update is available.  I told it to install.  It behaves as if the installation.  I close/close, but whenever I restart the same thing happens.  What gives?

  You probably need to update the AAM application. See this link:

  Update appears several times