Restoration by ICS GB

Similar Questions

• AT100 - after ICS upgraded the Swype App keyboard does not load

  Just upgrade my AT100 at ICS.
  Everything seemed OK until I have to enter text, and then got an error message indicating "open English WE failed."

  Changed to the Android keyboard and that works fine, but prefer to use Swype.
  Any suggestions?

  John

  Hi, have you tried a factory reset? Restoration of ICS to its factory State should solve the problem.

• Can I update AT200 ICS using the .zip through recovery package?

  Hello

  I have still no luck with my AT200, in my view, there is a software bug in my 3.2 honeycomb,
  Cannot restore or update but the Tablet works fine did factory rest several times,
  Anyway I was wondering if anyone has and update.zip for ics so I can upgrade through the recovery.

  Thank you.

  Hello

  I think that's not possible, you must update the software through the service station.
  Check if you can update the software for Android 4.0 ICS of my knowledge there should be an additional update.

• Windows ICS Services stopped & could not start the windows firewall in windows xp professional sp2.

  I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.

  Someone tell me the permanent solution of this problem?
  
  
  
  

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem. See the following links.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://support.Microsoft.com/kb/322756

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• Not able to start the Windows firewall/internet connection (ICS) service on the local computer for sharing

  It is said

  ERROR 2: THE SYSTEM CANNOT FIND THE SPECIFIED FILE

  When you try to manually start the Service. !

  System log gives:

  7035 (service has been successfully sent a start control.)

  7036 (service entered the stopped state.)

  7023 (the Windows Firewall/Internet Connection Sharing (ICS) service terminated with the following error:)
  The system cannot find the specified file. )

  Where is the specified file (which newspaper where)... ?  If I have a lack or a file corrupted how can I overwrite this file by a valid... ?

  Any help appreciated

  NVM...

  Its a Virus Rootkit,

  Download the (free) Rootkit in Kaspersky killer

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.zip

  Simple to use... Unpack... then

  Run... (Note disable any local Antivirus that is running)...  TDSSKiller.exe

  * Access to the restored Winupdate site, Miss-Direction has stopped.

  * Updates Windows restored.

  ICS Windows Firewall/Internet (ICS) personnel started successfully

  Thanks to "Joyce Liang (MS) Windows Update Support"

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• No ics for me so far

  up to now, I do not have ics for my phone, I'm on gb 2.3.4 my TR is 1254-1971! Please do sony anything before that you will not forget me however other users Super can you help me in something, if I flash sony official rom by flashtool do I need to unlock my bootloader? is it safe to update via the flash tool and if I save each every thing with app backup and restore and backup sms and restore and I record my sd card on my computer and the flashtool wipe everything on my phone, if I bring apps and sd card I lose achievements in games, and if sony updated the firmware again will I get the update officially by the center of companion or Update pc on the phone or only through the tool flash, thank you so much for your support and your time! (PS: my phone is not all carrier locked and I'm from Lebanon)

  Well, I can't really add anything here. The only thing I can recommend is to connect your phone every now and then to the PC Companion and updated.

• Pls release next update error of the current correction ICS

  Uttrely am satisfied with the ICS update for Sony 2011 phones. Upgraded my XPERIA ray the day eagerly update was pushed in India. Only for bogged down me by lagging behind screens, a couple of phone freezes / crashes a day battery and quick drain.

  Sony must either give a way to restore to the gingerbread, or solve the more obvious problems and push the next a.s.a.p. updated

  So far, end up with the annoying feeling that my phone could have frozen at any time while I'm not looking for it, and I became unavailable! What is a smartphone, if it can't be available, like a 'phone' forget all the time, even the part "amart?

  I suggest that you try the repair of software via PC Companion feature.

  http://www.sonymobile.com/GB/tools/PC-companion/

  Our developers are working on an update, but unfortunately I do not have information on estimated emissions.

• Windows calendar after the system restore notes no longer exist.

  The Windows calendar after the system restore notes disappeared forever, or can be found somewhere?

  Hello
  
  First we recommend that you search the .ics files confirm the windows calendar old files are present on the hard drive.
  Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-finding-files
  Windows Vista has an option to cancel the system restore. To do this, follow these steps.
  1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on undo system restore and then click Next.
  3. proceed to review your choices and then click Finish.
   
  Your computer will restart. When you are finished, you will see a confirmation that the cancellation is complete.
  
  For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/Undo-System-Restore
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to disable the ICS service DHCP part

  Hello

  I have ICS, and I need it from time to time

  How can I disable the DHCP server part?

  Hi John,.

   
  I want to tell you that you can get IE to use a different range. However, there is a configuration unsupported, not tested or proposed by Microsoft. It could cause problems of network on the host, so make a System Restore point before you do.

  Steps to follow:

  
  a. temporarily assign a static IP address to the network connection
  want to share using an address that is not in the 192.168.0.x.

  b. turn on ICS on this network connection.

  c. manually change the IP address of the connection to the local network (home network)
  to a different subnet, as 192.168.1.x.

  d. restoration of the IP address that is appropriate for the shared network connection.

  This unsupported configuration will automatically deactivate the DHCP server that normally runs on the ICS host computer. You will need to assign static IP addresses for all ICS clients.
   
  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• ICS ATT GPRS settings

  Hi, I recently bought a Q9h, but since I live in outside of the United States, my supplier tells me that so that my phone connects to internet via GPRS, I need to unlock or remove the ATT ICS settings, is there a way to do this?

  Except that I Don t have any problems with the phone, I cand send sms and mms, use the 3 g and so on.

  In addition to the fact that there is no option to do so, there is no need to remove the ATT ICS settings. What you can do, is add your provider GPRS setting, and then return to the submenu connections it and follow these steps:

  Highlight the GPRS

  menu/advanced/Internet connection

  under internet connection, you are able to restore your default login of your operator

• Restoration album Fotostream

  Hi guys,.

  Unfortunately, I deleted one of my albums shared in the foto flow. No chance to recover (not photos - they are there, only the album with all the comments, etc..)!

  Kind regards

  Sebastian

  If you are the "owner" of the shared album, then it is most likely that he is gone for good (the other is too peripheral).  You could try restoring a backup, even if a shared an element iCloud album then it may not be part of a backup.  May be worth it if you have a recent backup, which dates back to before remove you this album.

  But if you have joined another album and then ask them to re - share with you who should get it back.

• iPhone is disabled and ask for password for restore and backup

  my iphone screen is showing that the iphone is disabled and asking the password for restore

  I tried several times but each time the process, says need to access code for iphone restore

  pls advise.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Restore from 5 to 7 new +?

  I have an old iPhone 5 that is stored in iCloud.  I just pick up a new iPhone 7 + and tried to restore from iCloud.  After a minute or two, I get a message "cannot restore the backup.  Now what?

  Hello Steven T,.

  Thank you for reaching out to the Community Support from Apple. I know how it is important to get your new phone loaded with all your important data, and I want to help him.

  Often, when you see this behavior, it is because the new phone is not completely up to date and can be run at an old version of the iOS and the phone you are restoring from. Take a look at the article below to make sure your new 7plus iPhone running the latest version of iOS10.

  Update the software on your iPhone, iPad or iPod touch iOS

  Then try to restore your iCloud back up again and if the behaviour continues or if you are having trouble, the entire community is here to help.
  Best regards