Restore backup Rman last week

Similar Questions

• How to restore backup rman to the new host with the structure of the various files on windows?

  Here are the steps that I follow...

  1 oradim create new instance

  2 startup nomount pfile = 'C:\inittest.ora'

  3. restore conrolfile of 'c:\name.bak '.

  I found this file control point to the oradata folder as directed by the original host

  4. Alter database mount

  Mounted DB.

  5 restore database completed with error

  switch to the previous backup

  RMAN-00571: ==================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ==================================================

  RMAN-03002: failure of the restore command at the 12:17:55 08/12/2014

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  So, it is possible to restore and recover the rman backup to the new host with the structure of different file...?

  Hello

  Try to rename the log file to roll forward online to the desired path on the destination server, and then open with resetlogs.

  SQL > alter database file rename ' G:\APP\ORADATA\HOOP\REDO01. JOURNAL "to"";

  Kind regards

  Shivananda

• Restore backup RMAN TAPE not through RMAN

  Hello
  We directly support our production (8.1.7.4) tape
  If I can RESTORE by doing this
  
  1 - the admin Tape COPY (and not via RMAN) backup on a server items
  2. so I added elements of this backup and restore then
  
  or do I have to use RMAN to play the tape and restore this backup of pieces?
  
  Thanks for all the contributions

  user9145417 wrote:
  Hello
  We directly support our production (8.1.7.4) tape
  If I can RESTORE by doing this

  1 - the admin Tape COPY (and not via RMAN) backup on a server items
  2. so I added elements of this backup and restore then

  or do I have to use RMAN to play the tape and restore this backup of pieces?

  Thanks for all the contributions

  Hi, if you can copy all the backupset on disk space then you can restore/recover your database.
  1 copy all backupsets (backups) at the location on the local drive.
  2 restore controlfile, catalogue, restoration/recovery and open the database.

  rman target /
  startup nomount;
  restore spfile from 'localdisklocation';/*which you backups copied there*/
  shutdown immediate;
  startup mount;
  restore controlfile from 'localdisklocation';
  alter database mount;
  catalog start with 'localdisklocation';
  restore database;
  recover database;
  alter database open;
  

• Restore the RMAN backup on another server

  Hello

  ENV: Oracle 10 g 2 64 bit, RHEL 5.8 64 bit on ASM, Database size = ~ 1.3 to

  Backup RMAN of PROD will FRA and then backed up to tape. I have limited access to the PROD because it is maintained by 3rd party.

  My client is planning to move this database on their own datacenter (from the 3rd party data center). For test purposes, I asked DBA of 3rd party to provide us with an export of drawings required data pump. Export takes about 8 hours, and the import takes the same time to the new location. To copy the files exported to new locations takes another few hours (over the network). The total size of the dump file is around 500 GB. Thus, a whole cycle of Export-Import-copy takes about ~ 20 + Hrs.

  I want to try another option to reduce the time required for the updating of the database of PROD and which is "use RMAN backup of PROD ' and restore it on the data center server. RMAN full backup takes ~ 4hrs PROD and the restoration should be at the same time (new server has better and faster HW, storage with a SSD). I found this thread very useful on the Oracle Forms on this topic:

  Restore backup RMAN on another server

  This thread contains very good example for a restoration of database on the file system.

  I have a bit of confusion because my database uses ASM. The default location of the backups in PROD is FRA (on ASM == > db_recovery_file_dest = + FRA ). If I understand correctly, the RMAN backup must be in the same place where he was on the PROD Server - i.e. the diskgroup FRA.

  If I get a copy of the part 3 RMAN backup, how would I copy on FRA?

  OR can / should I just change the init parameter "db_recovery_file_dest" on the new server to point to the file system directory where the backup (say "/ ora_backup") and RMAN will pick up and restore the database?

  Please advise!

  Best regards

  You can restore the backup files to any location, then you must configure the channel using the "CONFIGURE CHANNEL device type disk format 'new location ';

  This thread will help

  Restore from a different location from the original location of RMAN backup

• Issues of start-up after installation of updates last week

  After HP or microsoft updates installed last week (the two are set to auto install) my laptop - Pavilion dv7 is having published the beginning upward. When the Office lights after start upward, my security essentials icon is red and my network icon has a blue spinning circle in it. After about 10 minutes and then a box pops up saying HP Support Assistant not working, looking for bugs (or something to that effect). 5-10 minutes later, the box disappears from high office, Security Essentials will illuminate green and the laptop connects to my network. This could be the cause of this problem? If I restore to before last week, everything works fine until the computer is updating again...

  Welcome to the HP Forum,

  It seems that 'something' in the update list does not approve the configuration of your system.

  • You can turn off the automatic updates: Set of updates from Windows to notify you when updates are available so that YOU can decide which updates you want to download and install.
  • Disable "Recommended updates", if you wish.

  Try the following to dig up the "broke" your configuration update:

  1. Use system restore to return the system to a working state.
  2. DISABLE automatic updates in Windows Updates - notify only the value.
  3. Reset one of your programs and settings that have been lost due to "going back in time."
  4. Manually CREATE a RESTORE point.
  5. You can even take this opportunity to create a new backup for your System Image.
  6. Then, in Windows Updates > > check for updates
  7. The updated list will show you that the updates are available for your system.
  8. Select AN update to the time - and install it.
  9. Restart the system - check the result.
  10. When you have found the culprit, stop > use system restore to 'come back' when things worked.
  11. Search for "Updates" in Windows Updates
  12. Find the update of 'Guilty' in the list of "Important available updates"
  13. Right-click on this update and then click on "HIDE".

  Let it "Auto-Updates" off - a lot of people do it and it works very well.

  I hope this helps you solve the problem.

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts to help.

• I have 3G usb dongal restor, last week my laptop customer then after very slow internet. I'm already chek another PC & laptop but my good dongal speed

  I am faceing slow internet I have 3G usb dongal restor, last week my laptop customer then after very slow internet. I'm already chek another PC & laptop but my dongal good speed, tips I like them.

  Try to run the tool:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Updating your PC and install all updates.

• How to use backups RMAN to restore a RAC database to single instance on another host?

  How to use backups Rman to restore a RAC database to single instance on another host?

  I tried to copy these inline for you:

  ------------

  Backups RMAN disk HowTo restore database RAC to single Instance on another node (Doc ID 415579.1)

  Down

• Restoring a backup RMAN to a new instance of the database

  Hi guys,.

  I have a problem with restoring a backup RMAN I have with me a new instance of the database. I have with me are:

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2. backup of the control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  3. the full backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_. BKP)

  I received these files to a client environment and I need to restore these to a new instance of the database on a local computer. I gave an attempt as follows (in Oracle 10 g):

  1, creates a new instance of the (Test75) database using the Oracle Database Configuration Assistant

  2 SET ORACLE_SID = Test75

  3 connection to this instance with RMAN

  4 tried to restore the SPFILE from the BKP file received.

  
  

  I make mistakes and cannot continue. I don't know if I will carry out the correct steps. Please help me telling me how I should achieve this goal.

  
  

  Thank you.
  

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2 backup of control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  The first backuppiece resembles a ControlFile and the other looks like a SPFILE'

  > I get error and cannot continue

  What is the error?  (I assume that you have tried to restore the O1_MF_NNSNF_SPFILE_BU_92DVGW9H_ SPFILE. BKP

  Note that you must also SET the DBID before restoring the controlfile

  Hemant K Collette

• How to restore the Rman incremental level 0 backup if the SID is different?

  Hi Experts,
  I had a little problem with restore rman backup of level 0. I have backup rman for oracle 11.2.0.1.0 - 64 bit and restore the server to Test 11.2.0.1.0 - 64 bit.
  
  Problem:
  Sid = prd production server
  Sid = prderp test server
  
  Operating system is Oracle linux 5 on both servers.
  
  How to restore Rman if the SID is different?

  Hello

  Refer to this http://shivanandarao.wordpress.com/2012/04/19/duplicating-primary-database-to-a-new-host-without-connecting-to-the-primary-database-in-oracle-10g11g/

  You need to restore it under the same name as you have in the production and later change the dbname using the NEST.

  If you don't want to go with this method, then I suggest you to go with the method of double RMAN.

  http://www.Oracle-base.com/articles/11g/duplicate-database-using-RMAN-11gr2.php
  http://docs.Oracle.com/CD/B28359_01/backup.111/b28270/rcmdupdb.htm

  rman target sys/@prod auxiliary sys/@tst
  RMAN>duplicate target database to 'prderp' nofilenamecheck;
  

  Please close this Re: how to restore the Rman backup if the SID is different? wire by marking as replied.

• Restore and backup RMAN recovery in a new server

  Version: 11.2
  Platform: Solaris
  
  I did several restorations of RMAN backups to new hosts. Whenever I do a full recovery of a cold backup, when I run the
  

  RECOVER DATABASE

  I used to get

  archive log filename=/u04/mvf/data/dbase/arch/arch.log1_235_678649266.dbf thread=1 sequence=235
  unable to find archive log
  archive log thread=1 sequence=236
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of recover command at 12/04/2011 14:33:18
  RMAN-06054: media recovery requesting unknown log: thread 1 seq 236 lowscn 11290198

  I considered this as being 'Normal' and always used to cause

  alter database open resetlogs

  But I read the below mentioned informative post yesterday.
  
  Question on create Redo log after restoring files and recover
  
  According to the guidelines of this post, I shouldn't use

  alter database open resetlogs

  for a full recovery.
  
  
  So, what should I do
  a.
  Should I use

  ALTER DATABASE OPEN ; -- I think I got some error with this command when i issued it after RMAN-06054 error . Can't recall what error

  OR
  
  b.
  Should I use

  recover database until sequence 236;

  Here is how I could use a combination of RMAN (for RESTORATION) and SQL (for the OPEN RESETLOGS):

  $ rman target /
  
  Recovery Manager: Release 10.2.0.2.0 - Production on Wed Nov 16 05:40:51 2011
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  connected to target database (not started)
  
  RMAN> startup nomount
  
  Oracle instance started
  
  Total System Global Area     419430400 bytes
  
  Fixed Size                     1261164 bytes
  Variable Size                113246612 bytes
  Database Buffers             297795584 bytes
  Redo Buffers                   7127040 bytes
  
  RMAN> restore controlfile from autobackup;
  
  Starting restore at 16-NOV-11
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  
  recovery area destination: /usr/oracle/flash_recovery_area
  database name (or database unique name) used for search: MYNDB
  channel ORA_DISK_1: autobackup found in the recovery area
  channel ORA_DISK_1: autobackup found: /usr/oracle/flash_recovery_area/MYNDB/autobackup/2011_11_16/o1_mf_n_767337675_7d6l55ck_.bkp
  channel ORA_DISK_1: control file restore from autobackup complete
  output filename=/usr/oracle/oradata/MYNDB/control01.ctl
  output filename=/usr/oracle/oradata/MYNDB/control02.ctl
  Finished restore at 16-NOV-11
  
  RMAN> sql 'alter database mount';
  
  sql statement: alter database mount
  released channel: ORA_DISK_1
  
  RMAN>
  RMAN> restore database;
  
  Starting restore at 16-NOV-11
  Starting implicit crosscheck backup at 16-NOV-11
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  allocated channel: ORA_DISK_2
  channel ORA_DISK_2: sid=155 devtype=DISK
  Crosschecked 16 objects
  Crosschecked 3 objects
  Finished implicit crosscheck backup at 16-NOV-11
  
  Starting implicit crosscheck copy at 16-NOV-11
  using channel ORA_DISK_1
  using channel ORA_DISK_2
  Finished implicit crosscheck copy at 16-NOV-11
  
  searching for all files in the recovery area
  cataloging files...
  cataloging done
  
  List of Cataloged Files
  =======================
  File Name: /usr/oracle/flash_recovery_area/MYNDB/autobackup/2011_11_16/o1_mf_n_767337675_7d6l55ck_.bkp
  
  using channel ORA_DISK_1
  using channel ORA_DISK_2
  
  channel ORA_DISK_2: starting datafile backupset restore
  channel ORA_DISK_2: specifying datafile(s) to restore from backup set
  restoring datafile 00003 to /usr/oracle/oradata/MYNDB/sysaux01.dbf
  restoring datafile 00004 to /usr/oracle/oradata/MYNDB/users01.dbf
  restoring datafile 00005 to /usr/oracle/oradata/MYNDB/datafile/o1_mf_example_7c4qzn5k_.dbf
  restoring datafile 00006 to /usr/oracle/oradata/MYNDB/undotbs.dbf
  channel ORA_DISK_2: reading from backup piece /usr/oracle/flash_recovery_area/MYNDB/backupset/2011_11_16/o1_mf_nnndf_TAG20111116T052209_7d6l4227_.bkp
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to /usr/oracle/oradata/MYNDB/system01.dbf
  restoring datafile 00002 to /usr/oracle/oradata/MYNDB/datafile/o1_mf_hemant_7c4qzn0o_.dbf
  restoring datafile 00007 to /usr/oracle/oradata/MYNDB/datafile/o1_mf_assm_tbs_7c4qzn0q_.dbf
  restoring datafile 00008 to /usr/oracle/oradata/MYNDB/datafile/o1_mf_mssm_tbs_7c4qzn0x_.dbf
  channel ORA_DISK_1: reading from backup piece /usr/oracle/flash_recovery_area/MYNDB/backupset/2011_11_16/o1_mf_nnndf_TAG20111116T052209_7d6l4216_.bkp
  channel ORA_DISK_1: restored backup piece 1
  piece handle=/usr/oracle/flash_recovery_area/MYNDB/backupset/2011_11_16/o1_mf_nnndf_TAG20111116T052209_7d6l4216_.bkp tag=TAG20111116T052209
  channel ORA_DISK_1: restore complete, elapsed time: 00:00:35
  channel ORA_DISK_2: restored backup piece 1
  piece handle=/usr/oracle/flash_recovery_area/MYNDB/backupset/2011_11_16/o1_mf_nnndf_TAG20111116T052209_7d6l4227_.bkp tag=TAG20111116T052209
  channel ORA_DISK_2: restore complete, elapsed time: 00:00:35
  Finished restore at 16-NOV-11
  
  RMAN>
  RMAN> exit
  
  Recovery Manager complete.
  $ sqlplus '/ as sysdba'
  
  SQL*Plus: Release 10.2.0.2.0 - Production on Wed Nov 16 05:42:52 2011
  
  Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
  With the Partitioning, OLAP and Data Mining options
  
  SQL> alter database open;
  alter database open
  *
  ERROR at line 1:
  ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
  
  SQL> alter database open resetlogs;
  
  Database altered.
  
  SQL>
  

  Note This error message 1589 is:

  $ oerr ora 1589
  01589, 00000, "must use RESETLOGS or NORESETLOGS option for database open"
  // *Cause:  Either incomplete or backup control file recovery has been
  //          performed. After these types of recovery you must specify either
  //          the RESETLOGS option or the NORESETLOGS option to open your
  //          database.
  // *Action: Specify the appropriate option.
  $
  

  Hemant K Collette

• Restore from different database Rman backup RMAN

  Hello world
  
  I'm practicing Rman, so I request that the way to restore the rman backup in a different database.
  
  For example:
  
  1. I have backup Rman of DB1 to level 0 and level 1 cumulative data base more archievelog
  
  2. I need to import or restore the backup Rman of DB1 to a different database DB2.
  
  What is the procedure to make the queries above. Please anyone one help out me.
  
  I use oracle 10g r2 running in windows server 2003.
  
  Thanks in advance.

  flanged wrote:
  Hello world

  I'm practicing Rman, so I request that the way to restore the rman backup in a different database.

  For example:

  1. I have backup Rman of DB1 to level 0 and level 1 cumulative data base more archievelog

  2. I need to import or restore the backup Rman of DB1 to a different database DB2.

  What is the procedure to make the queries above. Please anyone one help out me.

  I use oracle 10g r2 running in windows server 2003.

  Thanks in advance.

  If you want to restore the database from one node to the node of dfiferent, you can follow below url

  http://mohamedazar.WordPress.com/2011/03/13/disaster-recoveryrestore-database-from-one-server-to-another-server-when-different-location/

  but you couldnot able to restore the database backup entire rman in another database instance struture.

• restore the backup - RMAN optimization

  Hello
  
  Please help me define "restoring backup optimization on ' RMAN?
  
  Version 10G / 11G
  
  Kind regards
  Mathew.

  He didn't need any special settings. Its default behavior.
  http://download.Oracle.com/docs/CD/B28359_01/backup.111/b28270/glossary.htm#CHDJBHID

  HTH
  Aman...

• restore the RMAN backup to new server

  Hello
  I took RMAN backup of a database with the control file autobackup on... I copied the backup
  
  to a new server restored the spfile from backup and changed the settings
  
  bdump, udump, control the file because the directory structure is different from the original
  
  machine. I have restored the control file and it has been restored correctly.
  
  Now I need to restore the data files in the new path so I used the set newname and switch
  
  but I get an error... I posted the error please look
  
  
  RMAN > run
  2 > {}
  3 > the value of newname for datafile 1 to ' E:\ORACLE\METAGRID\ORADATA\METAGRID\SYSTEM01. DBF';
  4 > the value of newname for datafile 2 to ' E:\ORACLE\METAGRID\ORADATA\METAGRID\UNDOTBS01. DBF';
  5 > the value of newname for datafile 3 to ' E:\ORACLE\METAGRID\ORADATA\METAGRID\SYSAUX01. DBF';
  6 > the value of newname for datafile 4 to ' E:\ORACLE\METAGRID\ORADATA\METAGRID\USERS01. DBF';
  7 > the value of newname for datafile 5 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\TSDATA_01.DBF ';
  8 > the value of newname for datafile 6 to ' E:\ORACLE\METAGRID\ORADATA\METAGRID\TSIDX01. DBF';
  9 > the value of newname for datafile 7 to
  
  ' E:\ORACLE\METAGRID\ORADATA\METAGRID\TSDATA_AUDIT01. DBF';
  10 > restore database;
  11 > switch datafile;
  12 > restore database;
  {13 >}
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  From restoration to 11 November 10
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to E:\ORACLE\METAGRID\ORADATA\METAGRID\SYSTEM01. DBF
  restoring datafile 00002 to E:\ORACLE\METAGRID\ORADATA\METAGRID\UNDOTBS01. DBF
  restoring datafile 00005 to E:\ORACLE\METAGRID\ORADATA\METAGRID\TSDATA_01.DBF
  restoring datafile 00006 to E:\ORACLE\METAGRID\ORADATA\METAGRID\TSIDX01. DBF
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 11/11/2010 12:38:24
  ORA-19693: already included backup E:\RMAN\DB_0FLSLJH1_1_1 piece

  Try to clear and recataloguer backups will be used before the restore:

  rman target /
  
  crosscheck backup;
  
  delete expired backup;
  
  catalog start with 'path_to_your_backup';
  

• restore old backup rman (obsolete)

  Hello
  
  How can restore us an old backup of rman?
  in the backup from the list, I don't see this backup, but we have restored the rman backup folder in our recovery flash (from tsm system file backup)?
  
  do you know if it's possible?
  
  
  Best regards

  first added this file in RMAN, for example.
  Catalog recovery area;
  and accept only the new files or catalog only the directory selected.

  Then, try to restore in the test test env. (of course ;-)) using backup controlfile format " option.

  I think it's possible.

• Restore the RMAN backup to another database server

  Hello
  I create the instance TEST for my database of Production (PROD). I have a model base (MODEL) that is running on a different host.
  
  I can restore the RMAN backup taken on the PROD database to the MODEL database.
  
  
  Thanks in advance
  Amith

  Amith r wrote:
  Hello
  I create the instance TEST for my database of Production (PROD). I have a model base (MODEL) that is running on a different host.

  I can restore the RMAN backup taken on the PROD database to the MODEL database.

  Thanks in advance
  Amith

  Tychos said, why not use command DUPLICATE RMAN DATABASE to create the clone of the database?

  Anyway, you can easily restore the database on the new host using the steps mentioned in this link:
  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmrecov.htm#i1007814