Help! Problem Btvstack.exe and btbip.dll

Similar Questions

• IDT Audio system tray app has encountered a problem - sttray.exe and lack of Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll entry: RUNDLLEntry at Windows startup.

  Dell Dimension E510 system was crushed by a virus. The files were dumped, authorized reader and a reload fee system has been done. When all files have been charged and the system is recovered, the following errors began to appear at startup:

  -IDT Audio system tray app has encountered a problem - sttray.exe and

  -Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll Missing entry: RUNDLLEntry

  I'd rather be able to clear these by using the operating system disk I hope it do not screw the system. Any ideas would be nice.

  Thank you

  Dennis Holmquist

  Hi Dennis,

  DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer, then re - install printer drivers / should solve the problem.

  Reinstall the printer. In addition, install the latest drivers from the manufacturer's Web site.

  To connect a printer directly to your computer

  Remove a printer

  See also:

  Microsoft Windows XP - add a printer attached to your computer

  RUNDLL error message

  For IDT audio error, you can install the latest audio drivers from the Dell support Web site to see if it helps.

• Problem with RUNDLL and sthelp.dll.

  I have windows XP on a small Dell Inspiron.  When I start a dialog box titled 'RUNDLL' appears and has the following message: "error loading: C:\Documents and Settings\...\Application Data\sthelp.dll.» The specified module could not be found. "I downloaded Malware Bytes and run a full scan - it found nothing.  I have been devoted to the application of msconfig, clicked on the Startup tab and tried to disable the checkbox where this dll is called upward, but the operating system seems to want to find when they start the computer.  What can I do to get rid of this nuisance? When I close this dialog (RUNDLL), the computer works fine... it is every time at startup.  Any help would be appreciated.

  There is no XP file called stehelp.dll and Googling, there is nothing reasonable and a bunch of bad ideas.

  Looks like it's a vestige of some malware that has been partially removed from your unspecified brand system and the model with the specified, unspecified XP Service Pack version and not specified where the antivirus/antimalware applications.

  These message types are quite common things to do after that some malware was only partially removed FRO your system, so I suggest the following:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns
  .  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry.  There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html

  Consider making a manual, just System Restore Point in case you have to undo the changes.

  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Do a complete analysis from time to time when you have more time (in hours).

  They can be uninstalled later if you wish.

  The scans by operating clean, restart, and then fix any problems.

• Media Center 2005 crashed I loaded Windows XP sp2. Installing XP cannot load explorer.exe and another dll file... Need help or information on how to request recovery of microsoft disk MC2005... Gateway has not.

  Help please... I have a gateway gt4024 designed with Media Center 2005. Recently, the system was not "acting accordingly so I tried to reload the OS." I realized that I didn't have the recovery disc, then I decided to load XP Professional I had on it. The law on the computer is as it has been installed correctly and then I get a message saying explorer.exe could not be loaded properly or the drive perhaps is corupted and the same message to another .dll file. Once completed, I can reboot and use the computer, but then the windows installer will not work and the drivers are still present on the hard drive. Now, I loaded the new operating system before and I know that pilots are not supposed to be always present on the system. I then put a new hardrive has had the same problem. So, I then took the hardrive and placed in another computer that was be a dell and load xp fine without error. Can someone point me in the right direction. I contacted gateway to another Media Center recoverydisk, but they said because the computer was no longer under warranty, that they did not have the specified disc and to contact Microsoft. A link would be useful.

  BizzyBidnez,
  Thanks for posting on the Microsoft answers Forum.  Here is a link to the replacement of media information: http://support.microsoft.com/kb/326246
  However, since the entrance to the bridge of your system, the product key may not work with a replacement non - OEM drive.  I'm surprised that the bridge was not able to provide a replacement drive.

  I hope this helps. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove pxx.exe, pxw.exe, and sshnas21.dll error?

  Can someone help me remove these errors of my Matthew?

  (error pxx.exe, pxw.exe, sshnas21.dll)

  It has been occurring after that I tried to download the product adobe on an unknown site.

  Hi I_M_Lerning,

  Try to check the utility (MSCONFIG System Configuration window. (EXE). If they are, find their way and delete them. Check their location in the registry as well and delete them from there, as applicable. If you need further instructions on how to do, please reply.

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with .exe and vi.lib

  Hi all!
  I'm building an .exe, but I have problem with vi.lib

  In my project, there is the main VI and the "dependencies" folder that contains a few VI of vi.lib.
  When I start my VI from the development system, it works fine. When I run the compiled VI (.exe file I am building), a dialog box appears asking one by one, the location of some vi included in vi.lib, I have used!

  If I manually copy the folder c:\program NIUninstaller Instruments\LabVIEW 8.6\vi.lib in the folder where I have the exe (d:\builds\myproject\app), it works very well!

  Why the .exe file doesn't know where is the vi.lib? Can someone help me?

  Not found Dialog.vi is present in general CORE.vi error handler. Looks like you used the General or simple error handler in your program. I want to give you a work around. You open Manager error General VI (also the vi CORE) of the project and save it before generating your exe (you have to do everything every time by building your exe. Now, you don't have to put the screws to vi.lib in your exe file.

  Try it, I did it in my project.

  

• Use of the high - standby.exe and imageres.dll

  Hello

  I recently had problems with my laptop 64 bit Windows 7 is slow due to the use of 100% hard drive. By looking at the resource monitor I see that the Standby.exe image access frequently imageres.dll reading rates high when this is the case. Is - this usual?

  Any help would be appreciated!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• Problem of deployment and DOMUserDefRef.dll

  Hello

  I'm having a problem with the deployment. I took over a project from a co-worker. When we use the same description of the building, in its executable version the DLL DOMUserDefRef.dll is included, but not in my builds.

  I discovered this only when the end-user (customer) attempted to run the program built by me, and it failed mysteriously. Of course, the built executables work fine on my machine.

  It is perhaps interesting to note that on his machine, the overview includes the DLL and mine of course not. The DLL is located in my dependencies, however. But if I look at the display of files, there is already a difference: on my machine, the DLL is shown without a path, on his, it has the path to the \resources folder . I checked that the DLL is NOT in the %Path% on my machine.

  I can of course somehow add the DLL to the hand to the generation and distribute it, but I really want to understand what is happening here. Both computers used to generate the executable file are Windows 7 / 64 bit with LabVIEW 2011 SP1f2 / 32 bit and I just cross-checking that projects are identical by simply copying of his machine.

  Can we sched light on what could happen here?

  Thank you

  Joerg

  joergh wrote:

  On a quick glance, I can reproduce this problem on two PC with LV2012 installed. The PC on which it built OK is not 2012. So far so good. But why should a pause built installation LV2012 in LV2011?

  There is only one App Builder.  If you are working in a version that is not the latest primarrilly installed on the machine sound typically of the "best practices" do not install the App generator more later because you never know when these little details can back upward and bite you.

  To downgrade the app Builder, uninstall the app Builder only and reinstall it from the older media.

• [help] Problem with datagrid and DB

  Hello
  
  I have a problem with my flex2 app.
  EDIT: happens in all not only in firefox browser
  
  I use one
  < mx:HTTPService id = "userRequest4" url = "DB.php" useProxy = "false" method = "POST" > "
  < mx:request xmlns = "" >
  < / mx:request >
  < / mx:HTTPService >
  
  to send a request to a php script what data back to the database, and these data are load in a datagrid in this form:
  
  < mx:DataGrid id = "dg" width = "100%" height = "100%" dataProvider = "{userRequest4.lastResult.pathis.Product}" editable = "true" itemEditEnd = "getCellInfo (event); ">
  < mx:columns >
  < mx:DataGridColumn dataField = "ID" headerText = "ID" editable = "false" / >
  < mx:DataGridColumn dataField = "number" headerText = "Name" / >
  < mx:DataGridColumn dataField = "price" headerText = "Price" / >
  < mx:DataGridColumn dataField = "S" headerText = "S" / >
  < mx:DataGridColumn dataField = "M" headerText = "M" / >
  < mx:DataGridColumn dataField = "L" headerText = "L" / >
  < mx:DataGridColumn dataField = "XL" headerText = "XL" / >
  < mx:DataGridColumn dataField = "XXL" headerText = "XXL" / >
  < mx:DataGridColumn dataField = "other" headerText = "Other" / >
  < / mx:columns >
  < / mx:DataGrid >
  
  EDH, I call the php script, when someone clik in the menu option:
  private void menuHandler(event:MenuEvent):void {}
  if(Event.Item.@label=='Manage Product') {}
  Add_Products.visible = false;
  Add_Products.width = 0;
  Add_Products.height = 0;
  Add_design. Visible = false
  Manage_Products.width = 500;
  Manage_Products.height = 500;
  Manage_Products.Visible = true;
  Add_design. Width = 0;
  Add_design. Height = 0;
  userRequest4.url = "MP.php";
  userRequest4.send ();
  
  }
  }
  
  and this function updates the DB when the cell is changed:
  
  private void getCellInfo(event:DataGridEvent):void {}
  var myEditor:TextInput =
  TextInput (event.currentTarget.itemEditorInstance);
  Get the new value of the Publisher.
  var newVal:String = myEditor.text;
  var objN = new Object();
  objN.ids = dg.selectedItem.ids;
  objN.dato = newVal;
  objN.fields = event.dataField;
  userRequest2.url = "UP.php";
  userRequest2.send (objN);
  }
  
  and have the property to change the cell, and when that happens to update the database, it worked perfectly, no problems, but when to charge datagrid (I send the request to the DB.php) show this value have cells before that have edited :/
  you know a way to fix it?
  If someone knows please help me, I have urgent need of this :D
  
  Kind regards
  Shadow.

  try to add dummy prameter to your url in the httpservice which will force the browser not to cache xml

  for exempla, you can add '? blabla = "+ {new Date () .milliseconds}"

• Problems with CANcasXL and vxlapi.dll

  Hi Troy,

  Move forward to what follows,

  https://decibel.NI.com/content/docs/doc-30180#comment-30021

  I am able to transmit messages CAN STD and XTD id with 33.333kBaud.

  But the same with 500 k Baud does not work. I get no error xl library, instead, I get error of stuff.

  For more information, please look at the screenshot attached.

  

  Any help is appreciated.

  Thank you

  Yogesh

  Are you sure that the transmitter device is also configured to 500 k? Have you tried other speeds? Is the CAN network completed successfully?

• Malware/gamevance32.exe and gamevance32.dll/how to I find and remove?

  I ran a check of the system and had only 2 files viruses w... of over 1 million. I'm not particularly computer. I have regualar typewriters, stenography, etc.. While in school. I need to remove these files and I need to know where to find them. I am self taught here and would appreciate comments from any of you who are much more advanced than i. Thank you for your time and your intelligence.  Abbey

  Abbey of salvation,
  Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It provides detailed instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Help - problems with IE8 and IE9 (ADF) compatibility

  I want to know because some parts do not fit in IE browsers versions 8 and 9. I did these actions of this tutorial, but I have seen that compatibility mode is enabled on the components of the page to function normally. But the biggest problem is the compatibility with AJAX, components, which have up-to-date tables when the information is recorded in real time, displays a loading bar (which is a component that retrieves data) when you enter information, this bar when the browser is in mode compatibility (IE9) don't rest on the screen, no action and when the page is deleted this compatibility mode works but load bar components are inserted any malfunction to again, that is to say the application works perfect in firefox, but the problem is that I have to work on IE9, here is the link that made the changes.
  
  [http://blogs.oracle.com/jdevotnharvest/entry/running_adf_faces_applications_with_ie_9_in_ie_8_compatibility_mode | http://blogs.oracle.com/jdevotnharvest/entry/running_adf_faces_applications_with_ie_9_in_ie_8_compatibility_mode]
  
  
  If anyone has had this experience and can give assistance

  Hello

  think I should remove the blog post or make it more apparent that it is only for testing purposes. ADF faces does not support compatibility mode IE in production because of known issues in Internet Explorer. So if you can use the solution that I've documented to install a newer version of Internet Explorer while developing even for an older version, it is not supported when running. In your case, use native IE9 (or install IE8 and use native) and run it with a version of JDeveloper which is certified for the version of the browser.

  Anything by showing different in native IE9 that in IE 8 native (using a version of JDeveloper certified for IE9) then can be considered as a bug

  Frank

• How to stop Wampmanager.exe and easyphp to run after uninstall wampserver

  I've been with wampserver (apache, mysql, and php) for a while now. I needed upgrade of wamp and I am well aware that I need to completely uninstall it before installing the new version, I did. Unfortunately for me, until I installed the new version, after that Setup and it has not worked, I uninstalled, redownloaded, tried again. Finally, verified the wamp forum was packed with complaints about the x 64 version was a corrupted file. So I installed the 32 bit version to use temporarily. The next day, the new version has been released. So I installed and decided to check out the forum before going any further.

  No more complaints about the bugs. Finally, I decided that since the new wampserver has so many bugs, I'd rather stay here. I installed EasyPHP. Then I saw wampmanager.exe (0 2 services performed) in my taskbar properties. so I uninstalled easyphp.

  Long story short, I think that somewhere throughout this frustration, I forgot to stop the server (wampserver) before uninstalling. And Yes, I cleaned my registry of all things wamp after each uninstall.

  Now, when I click on the taskbar properties, I see wampmanager.exe and EasyPHP, but neither are installed. (Wampmanager.exe initially says '0 2 running services', but I was able to reinstall, and then stop the service and uninstall.) Now only says: wampmanager.exe). I tried a system restore, reinstall, uninstall. How can I get these 2 to stop smoking? Help please!

  
  

  Original title: help! Wampmanager.exe and easyphp running after uninstall wampserver. How can I stop and remove it completely?

  Hello

  Try the following steps:

  Step 1: check if there are no services of Wampserver and EasyPHP and disable them.

  Follow these steps:
  a. Click Start, and then type services.msc in the start search box and press ENTER.
  b. in the list of services, find all related services.
  c. right-click on the services, then click on stop.
  d. also, right-click on it and click on disable.

  Step 2: check is there is related programs in program files.
  a. Click Start, click computer.
  b. open the C: drive and then click program files.

  Step 3: perform a clean boot to disable it in the list of startup programs.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• WmiPrvSE.exe constantly calls c:\windows\system32\tzres.dll and tzres.dll.mui in the Windows 7 SP1

  clean install of Windows and all the Windows updates applied, same Microsoft Security Essential antivirus installed, and the WmiPrvSE.exe process constantly calls c:\windows\system32\tzres.dll and tzres.dll.mui in Windows 7 SP1.

  If the use of the HARD drive is never-ending, because he calls the files per second, and I have the red light of the hard disk activity lights up every second.

  

  also this problem because constant use of the processor to 3% in my PC, the WmiPrvSE.exe process never stop calling the above mentioned files.

  Hello

  For a better understanding of the question, I would like to know if the computer is connected to the domain network?

  Windows® Management Instrumentation (WMI) is a component of the Microsoft Windows operating system that provides control and management information in an enterprise environment. With wmiprvse.exe, managers of files in enterprise environments are capable of configuring and searching for desktop system or network information and applications on the network. Developers use the wmiprvse.exe file to develop applications used for monitoring purposes. These programs can inform users about important events associated with the right management of network and files or applications after each event occurs.

  Method 1:
  I suggest you to put the computer in a clean boot state, and check if the problem persists.

  Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to install all Windows updates available including the optional updates and check if it helps.

  See the article for more information.
  http://blogs.msdn.com/b/WMI/archive/2009/05/27/is-Wmiprvse-a-real-villain.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• When you try to install Microsoft Pinball Arcade in Windows 7 Home, I try to run setup.exe and the message that is missing a dll.

  original title: pinball arcade problem

  When you try to install Microsoft Pinball Arcade in Windows 7 Home, I try to run setup.exe and the message that is missing a dll.  Help, please. Thank you.

  This file is missing?

  Since it is an old game, it is possible that it will simply not work.

  Try to use the compatibility options to run the installation - the game is designed for Windows 98, but try different options and if that does not work:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows