Problem floor factory

Similar Questions

• Flow 11: Problem with factory reset flow 11

  Like others, our flow of hard disk is full and the computer now is nothing more than an expensive paperweight. I was trying to do a hard reset. However, due to a bad battery, it has been impossible. I turn on the machine and start pressing f11, but about the battery warning appears and disrupts this makes it impossible to get to the appropriate screen.  If this isn't the case, the Windows updates devouring the hard drive, it would still work as long as it is plugged in, battery defective or not.

  Is there a way to bypass the stupid message or a way to kill him?

  I will not buy another stream. We have loaded no program on this subject. It was just to surf the Internet and watch Netflix.

  Hello

  Thanks for posting in the HP Support forum.

  I'm sorry for the problems you are experiencing.

  Personally, I have no experience with battery on 11 HP flow problems but I have experience with defect of battery on other models of HP and it must / can be ignored. HP has an official article on this issue > > http://support.hp.com/us-en/document/c01443470

  Once the alert is displayed, simply press ENTER, and the message should disappear.

  In order to trigger the recovery flow 11 HP process, there may be some specific. I noticed that users need to be fast when starting up load the HP boot menu.

  1 Please, shut down the computer using the power button

  2. turn on.

  2.1 immediately start hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu that can resemble the following

  

  3. press F11 for recovery of the system

  4. follow the on-screen instructions.  Here's a sample video:

  > > https://www.youtube.com/watch?v=PC3sUc3lr3E

  > > https://youtu.be/PC3sUc3lr3E?t=109

  Is another way to start the recovery within Windows. Here's how:

  OPTION TWO > > http://www.eightforums.com/tutorials/2302-reset-windows-8-a.html

  Once you start to recovery, start the full reset with all erased or reset to factory default (for example, Recovery Manager or Reset).

  Advice re. updates and free disk space:

  -You can jump/stop all the updates of Windows after recovery to conserve space. I guess Win 10 could have been downloaded to your PC from Microsoft preparting it should be installed which is very big download

  Go to control panel > Windows updates and configure the option to never check updates

  Go to control panel > administrative tools > Services

  Find the Windows Update service (usually below), right click, choose "Properties". Auto-start, choose it to "Disabled". Confirm with OK

  It is also recommended that you stop Windows Defender and use 3rd part antivirus / browser to ensure a safer online. Fast, efficient and light protection that I recommend ESET - NOD32 AV.

  You can use the free space on the software disc such as the large TreeSize > > http://www.jam-software.com/treesize_free/

  He can tell you what kind of things you have on your computer use the most space.

  You can run programs such as CCleaner (www.piriform.com) or

  Disk Cleanup to remove unnecessary temporary files

  > > http://www.tenforums.com/tutorials/3012-disk-cleanup-open-use-windows-10-a.html

  You can move personal files (e.g. documents, pictures, videos etc.) on an external device (e.g. USB or SD memory card). Please, do not directly move/cut files programs or windows important things unless you're 100% sure what you are doing.

  Let me know if this helps you. Feel free to post again if you have problems.

• Model: 15-r53cl: problems after factory reset

  Hello, I need help. After I factory zero my PC, and when it turned on it was blinking symbol hp for about 30 seconds. Then things would turn black screen, then I see the hp symbol and this continues to repeat. Can someone help me, thanks.

  Hi @Jd5400,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your 15 HP laptop and having starting problems.  Try to make a hard reset.
  
  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.
  
  Hereis a link to computer does not start for Windows.
  
  Plug the adapter directly into a different wall socket. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• [SOLVED] A3500-FL problem after factory reset

  After a hard reset / factory reset I have boot, but after that, all I see is a black screen with a rotating circle / turning point in the middle.

  I can access the notification area, but I can't access settings or Launcher.

  help, please!

  P.S. I read this drug on this model and could not find a solution. Any help will be much appreciated

  AMAZING!

  the problem was that I was holding the tablet in portret orientation while it starts.

  So, I've ACCIDENTALLY keep it in LANDSCAPE mode, and voila! He seized the allowed parameters. So easy!

  I hope this will help others

• Problems with factory reset on a Packard Bell

  Hi cox.haley1,

  After a Microsoft update Tuesday May 13 laptop Packard Bell Easynote TK85-GN-051UK of my granddaughter had a huge problem with the start-up that could only be ordered with a Factory Reset. Finally I had all this work and re-installed all software programs. Several days later, after update of Microsoft more, another problem arose that could only be fixed again with a Factory Reset, so I had some things to begin to repair, but it got stuck in the Installation of the software... Install Office 2010...33/45

  18hrs. later he was still stuck there.

  I sent to Packard Bell for re-installing operating system Windows 7 DVD & utilities drivers & Applications DVD... Incl. postage. £37.

  They have not worked as once more stuck in the same place.

  Packard Bell is a Dutch manufacturer and a subsidiary of Acer will help so I don't need to waste money on recovery discs.

  Can anyone suggest something to help please?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-cannot-complete-installation-in-safe-mode/5e913a56-B29B-4386-A462-20e1991a1edc#LastReply

  Thank you. All sorted now. There is a corruption of Microsoft Office files. Formatting of hard disk. Re-installed my Windows 7, etc and then all software, updates everything and now all is well again.

• Windows detected a hard disk problem after factory reset?

  I have a Toshiba Satellite C855D-S5320, not old at all. I tried to download a game and then got the BSOD. I had to reset my PC, lost what I had, but ended up from scratch. Now, every so often, I get a message saying "Windows detected a hard disk problem. Back up your files immediately to prevent the loss of information... ». I have right click the disk hard "defective" for the error checking, no errors found. I tried HD Tune Pro, and tells me 'Warning' for the State of health (05) reallocated sector count (failure) is red, and number of events (C4) reallocated (warning) is yellow. Does this mean I have to replace the hard drive? The computer was working completely fine until BSOD. Now it works and everything but I get this error message. The laptop is not only really old and never any injuries, but perhaps past warranty. I really have nothing left to save, because I lost everything when I have to reset it to factory State. Any advice?

  It's really up to you.  Sometimes there may be false positives, but it looks like your drive is really having some problems.  It was even the cause of the BSOD, who knows.

  You can follow the steps of my colleague here to check your drive for errors:
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  But really, I would take the advice and replace the drive.  Or at least be prepared for this 'die', then save your files somewhere else like OneDrive or something so you don't lose important information when it does.

• RNDU2000 problem after factory reset

  Hi all

  A friend of mine gave me his RNDU2000.

  I tried a factory reset. RAIDar find to restart and gave me the choice. I chose XRAID2.

  After several minutes (test drives, intallatation...) device reboot and stuck with these configuration LED: Power On, Bill, 1, 2 flashing.

  RAIDar is more and I had no access to admin frontview.

  I changed hard drives, are doing a factory reset again and got the same results...

  Ping device response.

  Any idea?

  The firmware on the flash has been corrupted, so I put the latest firmware on the flash.

• Problem with factory reset access on my Aspire 5600U

  I have a copy on my hidden D and copied to USB drive. I up graded to win 8.1 and now I can not accsess or the another restore point can help me with this. I press alt + F10 at the splash screen and spend normal log at startup I tried the USB stick same result. I have a aspire 5600U all in one office and my computer knowledge is well above average was in computers for more than 15 years.

  Thanks in advance for any advice

  bksalt

  bksalt,

  If I understand you correctly, you want to use your USB recovery drive created using Acer Recvoery restore management?

  Please see the following article http://acer.custhelp.com/app/answers/detail/a_id/27608. It shows how to restore using the recovery USB drive.

• My iphone 6 has no service and always looking. WiFi works, sprint is not sure what is wrong with it. no damage ever to the phone. factory reset did not fix the it. Please advise?

  I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?

  isoldier86 wrote:

  I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?

  Get help with hardware features on your iPhone, iPad and iPod touch - Apple Support

• Qosmio G50 - keyboard problem

  I have a very strange problem with my G50 with Windows 7 and all the latest drivers (not that all have been updated for this laptop because Windows 7 drivers have been released). Often my keyboard will produce only letters in the order in any of the keyboard from qwertyuiop etc. Despite the keys on which I press and what program I use. She will do even if I press a single key (if I'm still getting some qwertyuiopasdfghj...). The * only * thing that arranges open IE8. It is also after the closure of IE8 and I open again to get my keyboard works correctly.

  I've had plenty (ZoneAlarm) virus and malware (SUPERAntiSpyware) analysis in safe mode and found nothing.

  This was which is rampant in me for a while, and despite much research on the internet and replacement of the built-in keyboard, I have yet to find someone with the same problem.

  Any ideas would be greatly appreciated.

  Hi Oakeypara,

  S really strange and I have never heard of this issue, but I think it's software related if s you can notice the problem if IE8 is opened.

  In any case, it would be interesting to know if you can see the same problem with factory settings (Vista).

  You something to update the last days? If so, you should try a system restore to an earlier point.

• Problem with motion control

  I have a Lenovo Ideapad Yoga and there is a problem with my order of movement. A pop up window says: 11 hand Form Load Failed. motion control cannot start: what should I do then?

  assybish wrote:
  I have this problem too what update to windows 8.1 looks like part of the program of control of movement broke out during the upgrade (as did several other - Bravo M * you) have tried Lenovo support and their stock answer to every problem is factory reset and return to windows 8 (and lose all your installed programs (, etc. >!) If any staff of Lenovo never read this please get a grip going back to win 8 is not the answer! Lenovo should provide for download or via a software of rescovery dvd for their applcations.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS041312

• Liquid E3 - problem of Status Notification bar

  Hi all!

  Here's the problem - whenever I take a call... when the phone against my ear/head... him receives Notification Status BAR "flow down" and sometimes I'll accidentally tap the icon of the 'flight' fashion and cut the call, or I'll tap the 'Settings' and continue to launch the phone in all types of different settings as I speak until finally I accidentally cut the call.

  There is a way to "Lock" the Status Notification BAR does not scroll down?

  I contacted ACER Tech Support and they say that it is not an option to do this, because it is a function of the phone that the Status BAR Notification CAN scroll down.

  So, I guess another question would be - "Is there an Android application that allows to lock the Status Notification bar?"

  Thanks in advance people!

  Paul

  If you put the phone near your ear, that the screen should close, try a call and get your hands on the proximity sensor.
  If the screen does not stop, there is a software problem, a factory reset can probably fix it but you will lose your data.

• Questions of Compaq Presario CQ60 with restore settings factory, sticked on a blue screen (BSOD, no)

  Hello, I have to get my usual laptop fixed, so I decided to get out of my Presario CQ60, which I have not used in 4-5 years. The operating system is Windows Vista Basic and I want to perform a restore factory settings (I don't mind losing the data on it) and upgrade to Windows 7 Home Premium. So far I tried to do a restore to factory settings by pressing F11 several times to start, and I get to a screen that says "Windows loading files", which leads to a black screen. After what seems like a long time, a blue screen appears where I have control of my cursor (not the Blue Screen of Death) and nothing has changed since. I will update with any changes, because things seem to happen after letting it go for a while, but for now any suggestions on what to do? Let me know if I've left out any information. Thank you!

  Hello

  We can not help you with this problem of factory settings.

  Press F11 at STARTUP is the method that HP plans to use.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00809678#n405

  1. Turn off the computer if it is not already turned off.
  2. Disconnect any external devices such as printers, USB drives and memory cards.
  3. Turn on the computer and immediately press the F11 key several times , about once a second, until the Recovery Manager opens.
  4. In the Recovery Manager welcome screen, click Next .
  5. On the Microsoft System Restore screen, select No , and then click Next .
  6. On the System Recovery screen, select Yes , and then click Next to continue the recovery process.

  etc.

  And that is the recovery Partition and the process which they installed during the manufacturing process, not Microsoft HP

  You will need to contact HP or ask questions in the forums to Support HP about this problem.

  http://h30434.www3.HP.com/

  @@@@@@@@@@@@@@@@@@@@@@@@

  And I don't think that it will be suitable for the upgrade to Windows 7 Home Premium as being Vista Basic, the material it will not suitable or sufficient to run Windows 7 properly and I have no idea if HP even wrote Windows 7 drivers for it.

  Before you buy Windows 7 after Vista fixed:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• Strange problem of S2340M

  I recently bought a S2340M and like it a lot. It worked great for a few months, but the last two weeks, he has developed this weird thing. Half left of the screen is quite good, but half right, starting with the Center and get progressively worse to the right edge, all other lines horizontal pixel is much darker and slightly flickery. There are also some burn-in image in the affected area of the screen.

  It does on DVI and VGA, on both my PC and even on the menu of the monitor, it certainly seems to be a display problem. Factory reset did not help. Is that what I can do to fix or should I start a warranty claim, which seems nearly impossible normal site of Dell without a serial number on a monitor.

  Thank you!

  Hi Saturn-F1,

  Thanks for sharing the information.

  It seems to be a failure hardware, as the question persists in self-test Diagnostics and integrated.

  I sent you a private message. Please respond with the required information so that I can check and get away from the line of conduct.

  Answer please if you have any questions.

• M177fw does not print

  I have a HP Color LaserJet Pro M177fw MFP which do not print unless the power Cycling & unplugged. In addition, does not copies.

  I was connected by ethernet using the HP standard TCP/IP port when the symptoms appeared. I changed it to an STD tcp/ip and installed a new basic driver (v11.21.00.2679 I think) & tried another computer, but seen the same behavior. I tried wireless instead of ethernet, but even once, the behavior has not changed. I updated the FW to v20140921 - has not solved the problem. Factory reset has not solved the problem.

  Both of my test machines have been win7x64 sp1. I tested the windows printer test page & printing of PDF documents.

  Points to the HP support: with their help, we confirmed that the problems started with adobe reader XI.

  The ACM has worked perfectly up until a document was printed drive. After this point, everything has stopped working until the printer has been disconnected.

  Permanent work around was to download FoxIt reader & uninstall adobe reader software. If this were not an option, I would be demoted to the X drive & I'm pretty sure that would have solved the problem.