Restore files by using the backup

Similar Questions

• I used the backup and restore of the backup C on pc. Then tried to open saved files with IE and started acting weird.

  zip files

  I used the backup and restore of the backup C on pc.  Then tried to open the files saved with IE.  IE went into free fall.  ???

  I have no idea what opened the backup files when you have double-clicked, or if you will not quote you took after doing this...  However, the official way to 'Browse' the content of the backup...

  You can view the contents of your backup by opening the wizard to restore files.

  1. Open backup and restore by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Backup and restore.

  2. Do one of the following:

     • To view your files, click Restore my files.

     • To display files all the, click on restore files for all users. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Do one of the following:

     • To browse the contents of the backup, click Browse for files or click Browse for folders.

       When you browse folders, you will not be able to see the files in a folder. To view individual files, use her browse for files option.

     • To search the contents of the backup, click search, type all or part of a file name, and then click search.

  If you back up to the top PC (VHD) integer then you mifght consider this trick:
  http://www.Petri.co.il/mounting-Vista-backups-using-Windows-complete-PC-Backup.htm

  According to the edition of Windows Vista that you have (and how useful, you will find the possibility to look at old versions of a given file and possibly restore), this could be useful to you:
  http://www.ShadowExplorer.com/
  (not a replacement of relief.)

  With regard to the rate of success vs. failure rate of backup - it is difficult to measure.  Indeed most of the people backs up incorrectly.  It's really * not * enough to set a backup and forget about it.  If you test ever that your backups work/glance to see if you are backing up the good thing - it's just not wise.  Although most people expect that it is essential that the backups were working properly (not a test, a real emergency) to be discovered.  Most individuals who report failures, unfortunately, fall into this category "when my aircraft crashed and I went to my backups - it turns out _ backup _ does not and never told me...» ».

  A question... If you manually create a ZIP file (not a backup) - can you still Explorer in it as a folder?

  To test... Create a folder on your desktop.  Copy some files into it - of different types.  I say COPY and not MOVE on the goal here - because you can just blow this folder and all that results from this folder later if it was all fair copies of things.

  Make a right click on this folder and choose "send to" and "compress (ZIP) file and give a name to the new 'folder '.  (It's really a file.)  On your desktop, you should have the original folder you created and copied some stuff in, and a new "folder" with the name you just gave.  If you open the 'new' folder - you should see the name of the folder that is still on the desktop and go to this folder, you should see the files.  You literally use Windows Vista to the 'discovery' inside a ZIP file as if it were a folder.

• Why can I not see the files I back up by using the backup and restore of Vista

  Can someone help me?  I have a Dell Inspiron 1525 and implemented backup and restore feature Vista so that every Sunday he automatically backs up my computer to my external drive.  I was on the computer when he said it starts up and that upward was completed successfully.  I assummed everything was fine until today when I show my father my drive external and noticed that none of the backup of files were there... or at least I did not see them.  The only files on the disk were the ones I put manually on here from my old computer.  I then ran a manual upward using Vista and again it says backup successfully completed.  I then watched the external hard drive and once again no new files.  The strange thing is the back up and restore program shows all the dates he has saved and also allows me to restore files from the back to the top.  To do this, I deleted a file I didn't really need out of my hard drive and then is gone to restore program and found the file and restored.  Problem is that the program does not say where he makes the file from.  What is going on?  Are backup files of certain types of hidden file I don't see unless I use the backup and restore program under vista?  I am currently running Vista Home Premium on a 32 bit system and the external hard drive I have is a Western Digital My Book Essential Edition.

  Windows backup is stored in a folder with the same name as your computer.  Open a command prompt and type echo %ComputerName% or startup, right-click on computer, properties.  You should see that % ComputerName % folder on your external drive, and in this context, a backup set. Steve Hebert - MVP Microsoft Internet Explorer

• Retrieve by using the backup control file

  Hello

  I was reading a book called Pro Oracle Database Administration by Darl Kuhn. There, under the theme of "The valuation of the loss of all control files", noted that all data files and control files are restored from a backup, because if we do not restore the data files the RCS in control files would be lower than the data in these scenarios files. Since online redo logs and archived newspapers is applied to the data files to roll forward in a current consistent state and does not roll forward to a control file.

  It is then mentioned to use 'recover the database by using the backup control file' then apply the logs (archive and redo if necessary).

  However I personally tested this script in a test environment and to bring all the backup control file could issue the same command as above and recover the database.

  My question is I know again and archives are applied only to the data files. So how does the control file are synchronized back when we do not restore the backup data files.

  Thank you

  If we do not restore the data files, the RCS in control files would be lower than the data files. Since online redo logs and archived newspapers is applied to the data files to roll forward in a current consistent state and does not roll forward to a control file.

  It would be incorrect you have determined. You can only restore the control files. You can manually create a control file and always do the restore.

  My question is I know again and archives are applied only to the data files. So how does the control file are synchronized back when we do not restore the backup data files.

  The control file is updated as well.

  See you soon,.
  Brian

• I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

  I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• computer crashed, used the backup to restore, formated instead and charged in the State of origin. any chance to recover photos lost at this stage?

  computer crashed, used the backup to restore, formated instead and charged to the State of origin, no chance to recover lost photos at this stage?

  Hello

  It is a good free program to recover data. but no guarantee.

  http://www.Piriform.com/Recuva

  You may need to contact the data recovery specialists, who are very expensive.

  See you soon.

  p.s., You use your computer, the less chance you have of data recovery.

• I get the message "files for the recovery diskette could not be created" when you use the backup utility. Why?

  I was using the Backup Wizard, backup all info on the computer to an external hard drive and insert a diskette in the drive.

  Hello

  · What is the edition of windows that you have installed?

  · What is the service pack installed?

  Try the steps listed in the link below: year Error Message is displayed when you try to use the Automated System Recovery Wizard: http://support.microsoft.com/kb/302700

• system tools - try to restore files from a disk backup ext hard

  try to restore from a disk backup files hard ext... went on all programs, accessories, System Tools... the backup file isn't in the menu.

  Hi WayneDavis777,

  ·         You are not able to see the backup option in the start menu?

  ·         What version of Windows XP you have?

  ·         How you back up the files on the external hard drive?

  Windows XP Home Edition doesn't have a default backup option, you must install it manually.

  If you have Windows XP Home Edition, you can follow this article.

  How to install backup from the CD-ROM in Windows XP Home Edition

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  See also:

  Microsoft Windows XP - Set backup options

• I have windows vista. I did a system restore. I can restore PIX saved on the backups before recovery was made?

  I have windows vista. I did a system restore. I can restore PIX saved on the backups before recovery was made?

  Hi rich,

  What kind of backup do you have?  If it were a full image backup, restoring them will be difficult unless you restore the entire image.  If it was a normal backup of files and folders, it should be fairly simple.

  Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on backup and restore Vista process

  http://technet.Microsoft.com/en-us/magazine/2007.09.Backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.   It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):

  http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  If the above does not help with your problem, then please go to the special Microsoft Forum dedicated specifically to backup issues and problems at the: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/ for assistance from experts by specialists in this field.

  I hope this helps.

  Good luck!

• Error to fix permissions if I use the backup library

  I have the library on an external hard drive and I starts the backup on a second external hard drive. When I opened the backup of my library in second external hard drive with a photo, it is reported an error to fix permissions. What can I do to use the backup from my library on the first hard drive failure?

  Is what kind of backup?  A Time Machine backup?  A copy of the library? Photos cannot open the library if it is on a volume of TimeMachine.

  And what type of backup drive?  If you want to open a copy of the photo library on an external drive, it's safer, if the file system is Mac OS extended (journaled) and the drive is mounted locally.

  Turn on the indicator "Ignore ownership on this volume" for the external drive the errors of authorization.

  When you select the drive in the Finder and open the Info Panel to the reader by entering ⌘I it should look like this in the "Général" section and in the section "permissions & ownership «:»»

  

• I use the backup that had the 5 c in my old iPhone 4?

  My iPhone 5 c too bad and you want to use my old iPhone 4... I use the backup that had the 5 c?

  Restore your device from an iCloud or iTunes backup - Apple Support

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• find data files belong to the backup piece

  Hi all
  
  DB 10.2.03.0
  
  Y at - it notice, that we can use to find data files belong to the backup piece. We can query the handle in order to find the name of the element.
  
  Hare krishna

  Hi Amit,

  Y at - it notice, that we can use to find data files belong to the backup piece.

  In fact, you have to join the three points of view in a sql against the target:
  Select p.handle, d.name
  Of
  v$ element_sauvegarde p,.
  v$ backup_datafile bd.
  v$ datafile d
  where p.handle = "& manage.
  and bd.set_stamp = p.set_stamp
  and bd.set_count = p.set_count
  and bd.file # d.file = #.
  /
  Rgds,
  Tycho

• 33 Firefox does not display a pdf file when using the response object

  33.0.2 Firefox does not display pdf files by using the code below in an asp.net program, that works for the previous versions of Firefox and also works with IE. I'm using the built-in pdf viewer. All my plugins are disabled.

             Dim strPDF As String
             strPDF = Session("filname")   'pdf filename
  

             Response.Clear()
             Response.ClearHeaders()
             Response.Buffer = True
             Response.ContentType = "application/pdf"
             Response.CacheControl = "Private"
             Response.AddHeader("Pragma", "no-cache")
             Response.AddHeader("Expires", "0")
             Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
             Response.AddHeader("Content-Disposition", "inline; filename=" + strPDF)
             Response.WriteFile(strPDF)
  

             Response.Flush()
             Response.Close()
             Response.Clear()
             Response.End()
             Session("filname") = ""
  

  What is the result of this code that Firefox receives through the headers of HTTP response if you check that the Live Http Headers extension?

  • https://addons.Mozilla.org/firefox/addon/Live-HTTP-headers/

• "File in use: the action cannot be completed because the folder or file is open in another program" when you rename a folder with Thumbs.db inside

  I looked at many similar responses but no nails really our problem.

  On a Windows client 7 to rename a folder that is located on a file server running SBS 2003.  When you try to rename a file that has a file "thumbs.db" in there he throws the message "file in use: the action cannot be completed because the folder or file is open in another program. and then it won't let you rename it.  This isn't a problem with other XP clients attached to the same server.  We have reduced to folders that have this file thumbs.db in through trial and error.

  It will work when you show just the icons which is unacceptable.  However, you can rename a folder that is located on the customers own local disk.

  Suggestions - we can work around it, but it of inturupting workflow and is old fashioned all simply boring.

  Thank you

  Happy to provide system info, anyone needs

  Hi JustinEllery,

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads