Retrieve by using the backup control file

Similar Questions

• Post in print, using the burst control file

  Hi all
  
  We use the break control file to print and send. Email option works very well. But when it comes to printing, printing "PDF file not printed. 128 MB of memory is necessary to allow a direct PDF printing"in printing.
  
  We use CUPS and this is the way that we use for printing.
  
  IPP://localhost:631/printers/YG_MAIN
  
  When we try to run the same program manually, giving the name of the printer and the number of copies at 1, then we are able to see the pdf output. Other reports are normal bi publisher also works well, w.r.t. this printer. We face this problem when we run xml program, with the option of printing bursting.
  
  Suggestions please...
  
  ---------------------------------------------------------------
  Here's the full breakdown control file,
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < xapi:requestset xmlns:xapi = "http://xmlns.oracle.com/oxp/xapi" >
  < xapi:globalData location = 'stream' >
  < / xapi:globalData >
  < select xapi:request = ' / XX_IMB/LIST_G_PAT/G_PAT ">
  < xapi:delivery >
  < xapi:email id = "123" server = "XXXXXX.com" port = "25" from = "[email protected]" > "
  < xapi:message id = "123" to attachment = "${DESTINATION}" = "true" content-type = "text/html" subject = "Test email" > please find the attachment < / xapi:message >
  < / xapi:email >
  < xapi:print id = "print1" printer = copies "ipp://localhost:631 / printers / ${DESTINATION}" = "1" / >
  < / xapi:delivery >
  < xapi:document - output type = 'pdf' flow '123' = >
  < xapi:template type = "xsl - fo" location = 'xdo://XXCUS. XX_MAIN.en.us"filter=".//G_PAT[DESTINATION_TYPE='Email"]" > "
  < / xapi:template >
  < / xapi:document >
  < xapi:document - output type = 'pdf' flow 'print1' = >
  < xapi:template type = "xsl - fo" location = 'xdo://XXCUS. XX_MAIN.en.us"filter=".//G_PAT[DESTINATION_TYPE='Print"]" > "
  < / xapi:template >
  < / xapi:document >
  < / xapi:request >
  < / xapi:requestset >

  BI Publisher burst of CUPS printer uses no PASTA, out don't is converted from PDF to Postscript, it does when it is executed via simultaneous Manager.
  You can put an entry in the next $XDO_TOP/resource/xdodelivery.cfg (replace with your printer):
  

  
  
  
  
  ipp://mycupsserver.mydomain:631/printers/MYPRINTER
  
  /usr/local/bin/pdf2ps -paper A4 {infile} {outfile}
  
  
  
  

  Kind regards
  Gareth

• We can to restore the content of a game without the backup control file?

  Hello
  
  I went in earlier today, a situation when someone (it wasn't me this time!):
  (1) a to back up a database and its archivelogs, in a compressed backup sets;
  (2) pushed the files to another server and
  (3) deleted everything on the server source, including ALL control files and control files.
  
  As he tried to recover the control file was missing and asked for help... I worked around the issue by using the snapshot controlfile he had forgotten (lucky me!)
  
  Now I can not remove from my mind the idea that I won't be so lucky the next time... I wonder if there is another way to work around this problem?
  
  Does anyone have an idea how to restore the contents of a backupset when we lack ALL control files and their backups? I tried to save the backup in the controlfile to a different database, but it does not work. I didn't find anyway to recreate a controlfile with a specific dbid without data files (and those who are in the backupset...).
  
  Any other idea? Best regards
  
  Gregory

  Hi arkzoyd,
  Is the only way to restore data from a backup set files using rman an instance and a controlfile so the answer is no.
  Kind regards
  Tycho

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning

• I used the backup and restore of the backup C on pc. Then tried to open saved files with IE and started acting weird.

  zip files

  I used the backup and restore of the backup C on pc.  Then tried to open the files saved with IE.  IE went into free fall.  ???

  I have no idea what opened the backup files when you have double-clicked, or if you will not quote you took after doing this...  However, the official way to 'Browse' the content of the backup...

  You can view the contents of your backup by opening the wizard to restore files.

  1. Open backup and restore by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Backup and restore.

  2. Do one of the following:

     • To view your files, click Restore my files.

     • To display files all the, click on restore files for all users. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Do one of the following:

     • To browse the contents of the backup, click Browse for files or click Browse for folders.

       When you browse folders, you will not be able to see the files in a folder. To view individual files, use her browse for files option.

     • To search the contents of the backup, click search, type all or part of a file name, and then click search.

  If you back up to the top PC (VHD) integer then you mifght consider this trick:
  http://www.Petri.co.il/mounting-Vista-backups-using-Windows-complete-PC-Backup.htm

  According to the edition of Windows Vista that you have (and how useful, you will find the possibility to look at old versions of a given file and possibly restore), this could be useful to you:
  http://www.ShadowExplorer.com/
  (not a replacement of relief.)

  With regard to the rate of success vs. failure rate of backup - it is difficult to measure.  Indeed most of the people backs up incorrectly.  It's really * not * enough to set a backup and forget about it.  If you test ever that your backups work/glance to see if you are backing up the good thing - it's just not wise.  Although most people expect that it is essential that the backups were working properly (not a test, a real emergency) to be discovered.  Most individuals who report failures, unfortunately, fall into this category "when my aircraft crashed and I went to my backups - it turns out _ backup _ does not and never told me...» ».

  A question... If you manually create a ZIP file (not a backup) - can you still Explorer in it as a folder?

  To test... Create a folder on your desktop.  Copy some files into it - of different types.  I say COPY and not MOVE on the goal here - because you can just blow this folder and all that results from this folder later if it was all fair copies of things.

  Make a right click on this folder and choose "send to" and "compress (ZIP) file and give a name to the new 'folder '.  (It's really a file.)  On your desktop, you should have the original folder you created and copied some stuff in, and a new "folder" with the name you just gave.  If you open the 'new' folder - you should see the name of the folder that is still on the desktop and go to this folder, you should see the files.  You literally use Windows Vista to the 'discovery' inside a ZIP file as if it were a folder.

• Why can I not see the files I back up by using the backup and restore of Vista

  Can someone help me?  I have a Dell Inspiron 1525 and implemented backup and restore feature Vista so that every Sunday he automatically backs up my computer to my external drive.  I was on the computer when he said it starts up and that upward was completed successfully.  I assummed everything was fine until today when I show my father my drive external and noticed that none of the backup of files were there... or at least I did not see them.  The only files on the disk were the ones I put manually on here from my old computer.  I then ran a manual upward using Vista and again it says backup successfully completed.  I then watched the external hard drive and once again no new files.  The strange thing is the back up and restore program shows all the dates he has saved and also allows me to restore files from the back to the top.  To do this, I deleted a file I didn't really need out of my hard drive and then is gone to restore program and found the file and restored.  Problem is that the program does not say where he makes the file from.  What is going on?  Are backup files of certain types of hidden file I don't see unless I use the backup and restore program under vista?  I am currently running Vista Home Premium on a 32 bit system and the external hard drive I have is a Western Digital My Book Essential Edition.

  Windows backup is stored in a folder with the same name as your computer.  Open a command prompt and type echo %ComputerName% or startup, right-click on computer, properties.  You should see that % ComputerName % folder on your external drive, and in this context, a backup set. Steve Hebert - MVP Microsoft Internet Explorer

• I get the message "files for the recovery diskette could not be created" when you use the backup utility. Why?

  I was using the Backup Wizard, backup all info on the computer to an external hard drive and insert a diskette in the drive.

  Hello

  · What is the edition of windows that you have installed?

  · What is the service pack installed?

  Try the steps listed in the link below: year Error Message is displayed when you try to use the Automated System Recovery Wizard: http://support.microsoft.com/kb/302700

• Error step 7, creation of WebCenter, and schemas content using the remote control

  Hi all

  I have the installation of the portal WebCenter using JSK, but the failure of the process when it tries to create patterns using the remote, it shows "Time out when connecting to the database. The current values expires 30 seconds. "UCR-6090: jump main operation: validation stage of connection failure.

  This is the content of install_setup.log

  Thu Aug 14 10:12:32 CLT 2014: END STEP 6 22: Configurion of the database Instance

  Thu Aug 14 10:12:32 CLT 2014: START STEP 7 22: creation of the WebCenter and patterns content using the remote control. Estimated time is 1 minute. Please wait..

  localhost.localdomain:1521:ORCL

  Installation of patterns Begin spaces

  Please enter the password(User:sys) of the database:

  Processing of command line...

  Timeout connecting to the database. Current timeout value is 30 seconds.

  UCR-6090: jump main operation: validation step connection failure

  And the rcu.log

  14-08-2014 10:14:38.925 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...

  14-08-2014 10:14:38.927 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: from validations...

  14-08-2014 10:14:38.934 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))

  14-08-2014 10:15:39.250 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:15:39.250 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (sid = ORCL) (server = dedicated)))

  14-08-2014 10:16:39.192 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:16:39.192 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:

  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: timeout when connecting to the database. Current timeout value is 30 seconds.

  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1366)

  at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:140)

  at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:346)

  at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:339)

  at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:363)

  2014-08-14 10:16:39.193 rcu ERROR: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: UCR-6090: operation hand jump: validation step connection failure

  2014-08-14 10:16:39.193 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: UCR-6090: operation hand jump: validation step connection failure

  Any suggestions?

  Best regards!

  Hello

  (1) you see no error on the Setup screen? If Yes please download the screenshot?

  (2) the UCR is a failure because it is not able to connect to the database. Please make sure that you have entered the correct database details.

  Also, can you please try the following and check the box.

  Go to the location / / rcu/config /

  Take backup for the file rcu.properties, and then change the below

  JDBC_LOGIN_TIMEOUT = 30

  TO

  JDBC_LOGIN_TIMEOUT = 300

  and try again.

  Concerning

  Françoise

• Why open DB with RESETLOGS option after either complete or CAMILLE with a backup control file?

  Hi all

  I'm newbie DBA and totally confused when reading about the recovery.

  Why open DB with RESETLOGS option after either complete or CAMILLE with a backup control file?

  Using while will happen after we open DB using resetlogs in above mentioned mode of recovery.. .apart from resetting the log sequence 1?

  Kind regards

  Ritu

  Hi Ritu,

  Google is a very rich source of information...

  I found this article in Hemant which I suppose is very informative for you... Read everything including the comments!

  Hemant Oracle DBA blog: OPEN RESETLOGS without making a recovery

  HTH,

  Thierry

• Error to fix permissions if I use the backup library

  I have the library on an external hard drive and I starts the backup on a second external hard drive. When I opened the backup of my library in second external hard drive with a photo, it is reported an error to fix permissions. What can I do to use the backup from my library on the first hard drive failure?

  Is what kind of backup?  A Time Machine backup?  A copy of the library? Photos cannot open the library if it is on a volume of TimeMachine.

  And what type of backup drive?  If you want to open a copy of the photo library on an external drive, it's safer, if the file system is Mac OS extended (journaled) and the drive is mounted locally.

  Turn on the indicator "Ignore ownership on this volume" for the external drive the errors of authorization.

  When you select the drive in the Finder and open the Info Panel to the reader by entering ⌘I it should look like this in the "Général" section and in the section "permissions & ownership «:»»

  

• Automate the backup of file

  Hello

  I am trying to automate the backup of files version using process has the configuration of the client/batch file, in the user guide it States it is possible but did not give any details as to what are the parameters to be used to do this, nobody knows the format needed to run this process.

  See you soon

  Chris

  Refer to ScottQ response of the next thread, let me know if you need help.

  Re: Can we use mixture of DRM for copy version? Just for print version

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• ORA-01103: the 'RAC' name in the database control file is not "STB".

  HIII..,.
  
  Im doing my dataguard, my primary side installation is a RAC 2node and Eve is a single node. IM using Database 11 GR 2.
  
  when im using the RMan command for duplication of data im getting the following error.
  
  
  
  SQL statement: alter database mount rescue
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 03/10/2011 18:33:58
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the sql command on the channel clone_default at 03/10/2011 18:33:58
  RMAN-11003: failure during parsing / execution of the SQL statement: alter database mount rescue
  ORA-01103: the 'RAC' name in the database control file is not "STB".
  
  
  Please can someone help me to solve the issue. ??
  
  Thanks in advance...

  Hello

  (1) If you use "DORECOVER" while cloning, please remove it.
  (2) its still not, simply set the FRA and IE

  ALTER system set DB_RECOVERY_FILE_DEST = '+ DATA ';
  ALTER system set db_recovery_file_dest_size = 2GB;

  Note: Set it to primary and standby

  Clone of the DB.

  It works perfectly now, and once Reset original value if you do not want it.

  Happy cloning :)

  Kind regards
  Rakesh

• How to get the break control file in the xml editor

  Hi all
  
  I use oracle Apps r12 and Bi publisher 10g.
  
  I followed these steps to burst Xml reports
  
  http://apps2fusion.com/apps/21-technical/251-xmlp-concurrent-program-revisited-with-bursting.
  
  I created the definition of data and now I need to reach the break control file.
  
  If the system will generate burst control file after the creation of data definition, or to create a control file.
  
  Thanks and greetings
  Srikkanth.M

  You must create a control file and upload it.
  You can also check this blog for detailed steps http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html

• the multiplexing control file

  I tried to multiplex the control file, here are the steps I followed
  (1) normal stop
  (2) copy the controlfile to another location
  (3) to change the parameter file
  (4) start
  
  but my database is always the default control files 3 poster, what could be the problem?.,...
  
  Thanks in advance

  Here is an example how multiplex control files with Oracle XE (10.2.0.1) on Windows when the database uses SPFILE:

  c:\oraclexe\oradata\XE>sqlplus / as sysdba
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Fri Feb 4 09:05:43 2011
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  805306368 bytes
  Fixed Size                  1289996 bytes
  Variable Size             226492660 bytes
  Database Buffers          574619648 bytes
  Redo Buffers                2904064 bytes
  Database mounted.
  Database opened.
  SQL> show parameter spfile
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  spfile                               string      C:\ORACLEXE\APP\ORACLE\PRODUCT
                                                   \10.2.0\SERVER\DBS\SPFILEXE.OR
                                                   A
  SQL> show parameter control_file
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  control_file_record_keep_time        integer     7
  control_files                        string      C:\ORACLEXE\ORADATA\XE\CONTROL
                                                   .DBF
  SQL> alter system set control_files='c:\oraclexe\oradata\xe\control.dbf','c:\oraclexe\oradata\xe\controL2.dbf' scope=spfile;
  
  System altered.
  
  SQL> shutdown immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> exit
  Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  
  c:\oraclexe\oradata\XE>copy control.dbf controL2.dbf
          1 fichier(s) copié(s).
  
  c:\oraclexe\oradata\XE>sqlplus / as sysdba
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Fri Feb 4 09:08:05 2011
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  805306368 bytes
  Fixed Size                  1289996 bytes
  Variable Size             226492660 bytes
  Database Buffers          574619648 bytes
  Redo Buffers                2904064 bytes
  Database mounted.
  Database opened.
  SQL> show parameter control_files
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  control_files                        string      C:\ORACLEXE\ORADATA\XE\CONTROL
                                                   .DBF, C:\ORACLEXE\ORADATA\XE\C
                                                   ONTROL2.DBF
  SQL>
  

  Note the syntax with the required quotes for each control file:

  alter system set control_files= '' , '' scope=spfile;
  

  Edited by: P. Forstmann on 4 Feb. 2011 09:13