Restore from recovery media

Similar Questions

• Satellite Pro C660-239 - restore from recovery media error

  Hello!

  I have a laptop from a client, it is a Toshiba Satellite Pro C660-239, and I'm having a strange problem.

  The original hard drive failed, and as the laptop is out of warranty, we bought a new hard drive and ordered the recovery media to this model, our assistance to repair local toshiba.

  After the installation copied the files on the disk, the imageX command fails when you restore the image with error files:

  "the file or directory is corrupted and unreadable."

  The hard drive is new, and I also tried with more than 2 hard drives, as well as with an external cd-rom drive.

  I spoke with the support of assistance local repair, and told me that this happens because the ins new ' t compatible with the recovery media hard drive?

  One of the new disks hard I tried, was the exact same model as the original hard disk, and the error persists, so the hard drive may not be the problem.

  Y does it have that no change in the recovery media is corrupt?

  Could also be a motherboard problem?

  Thank you

  > Is there any change in the recovery media is corrupt?
  Of course, this is possible.
  In case the HARD disk is OK, the recovery media may be damaged.

  > Could also be a motherboard problem?
  I don t think so. I imagine that the HARD drive is recognized correctly in the BIOS and the error message says something about corrupt directory. I guess the disk directory that is the meaning and I think that the media should be replaced.

• D: to restore from recovery disks?

  I accidentally "formatted", uh, deleted, D: on my Mini 110-1125 W7 drive as he tried to recover from a virus. Can I restore it by running a recovery of the entire system of the disks?

  (Why is it so easy to delete D:!)

  Yes, recovery disks will restore the D:\Recovery.

  Never realized were "so" easy to remove D: helps you get rid of the virus?

• Replaced the bad motherboard and cannot restore from recovery disks

  I replaced a card Pegatron M2N78 - mother in a Pavilion p6130y PC and I tried to restore to the recovery disks, but he says that the restore disks will not work on this system.  Really, I care is in accordance with the operating system (Vista), I don't want to pay for what I have already.  Research I've done shows that the old motherboard was known to be defective.  During the troubleshooting process, the recovery process was started, but then is broken when the card mother crapped out and didn't not recognize SATA devices.  When trying to start, he knew and then wouldn't recognize them, usually about 75/25% respectively.  Because of this, I can't just start it on the HARD drive and update the existing drivers and update the Vista license.  I have more money to buy only 7.

  How can I get the installed operating system or perform a full recovery on this system?

  Hello:

  The recovery disks only works on exact material they were made for.

  Because you have installed a different motherboard, at microsoft a new motherboard = a new PC.

  OEM licenses are licenses that computers come with HP (and any other manufacturer).

  This means that they are good only for that specific PC and cannot be transferred to another PC or motherboard.

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx#fBid=38vuxXQoPQY

  Q. a PC with an operating system of Windows OEM may have its motherboard updated and keep the same license? What happens if it was replaced because it was defective?

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• How to restore Vista recovery Partiton? Help, please

  I bought the HP Pavilion dv6z-1100 CTO Entertainment Notebook PC with installed OS Vista Home Premium (32 bit).

  There are recovery Partiton (drive D). I have not at any drive recovery. There were a few errors in the operating system later and I installed some other cd of vista vista. I got to the recovery partition. Now I want to restore vista recovery partiton present on my hard drive. I run the System Restore Wizard, but there is no option to restore the D drive system. It gives only the option restore from restorepoint. Please tell me how to restore from recovery partation. Best regards

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, with HP you will need to press F11 at startup to start the recovery process...

  See you soon.

  Mick Murphy - Microsoft partner

• Q: How do I restore from USB if the recovery partition is deleted?

  Hi, make a backup of my spectrum 14 of jealousy cumputer Windows 7 on a USB stick with hp Recovery Manager. After that I deleted the restore disk partition and installed Windows 8. Now have sleep/power issues on Windows 8, need to go back to 7 can I test before sending it in for repair.

  Even if I did a backup USB, of bus I can't boot from the USB and the ect/f11 option at startup, does nothing, yet windows just starts.

  Now, how can I restore from a USB Pendrive without having access to the F11 restore the disk option, how to reinstall System Restore?

  Hello

  A backup is not a clone. You have cloned partition to a USB bootable for her to work.

  The HP Backup & Recovery Manager does not copy the recovery partition, even if you back up the entire hard drive.

  Here is a reference for the HP Recovery Manager manual.

  Unless you do a recovery as a DVD or USB media, the only source for what is available to you is to buy a set of recovery disks.

  I would like to have better news for you on this subject.

  Best regards.

• Create product recovery media does not work after restoring to factory settings

  Updated my T500 from 160 to 320 GB.

  First of all, ran the RnR restore to factory settings with the product recovery media that I made earlier. And then restored my C: volume from my Windows Home Server backup.

  Everything seems as usual except my service partition is now f: instead of S: and my Lenovo partition is H: instead of q:-I tested it I can get into the RnR with F11 service partition.

  But when I try to create new recovery media product the ICT box is grayed out on the first prompt so I can't continue. Put back the partition of Lenovo on q: in disk management has not changed anything, he would let me change the letter of the service partition.

  It's no big deal - I still have my original disks - but it would be good to know what I could improve for the next time I have to do a restore.

  Think that I thought about it - when I restored my C volume I also restored a version of RnR who 'knows' I already burned disks. So next time if I want to burn new disks, I need to do on the version of the system factory setting before you restore the volume C:.

• RMAN restore error - recovery of media asking unknown journal: thread 1 seq 7

  IM using RMAN to copy a database to another server. The new server is IDENTICAL to the former. By identical I mean she has the same break the name, ip address, operating system, directory structure and the Oracle version.
  
  The new server has already created instance, (same name as the old server example, paths etc.)
  
  The backup files have been restored manually on the new server, the same places that they were on the old. (RMAN makes a backup controlfile automatic and also the archivelogs on the old server).
  
  Ive restored the control file to the new server from the elements of RMAN backup.
  
  Ive cataloged items of RMAN backup on the new server.
  
  I know that the last available in the backup of the archivelogs sequence running on the new server:
  
  backup from the list of the archivelog all;
  
  List of backup sets
  ===================
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  14,43 5 M DISK 00:00:03 11 MAY 11
  BP key: 9 situation: AVAILABLE Tablet: NO Tag: TAG20110511T163502
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\
  011_05_11\O1_MF_ANNNN_TAG20110511T163502_6WOC5833_. BKP
  
  List of newspapers archived on backup the value 5
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 2 550217 10 MAY 11 556559 11 MAY 11
  1 3 556559 11 MAY 11 559776 11 MAY 11
  1 4 559776 11 MAY 11 560093 11 MAY 11
  1 5 560093 11 MAY 11 560794 11 MAY 11
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  RECORD OF 15.50 K 7 00:00:01 11 MAY 11
  BP key: 10 location: AVAILABLE Tablet: NO Tag: TAG20110511T163653
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\
  011_05_11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_. BKP
  
  List of newspapers archived in backup set 7
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 6 560794 11 MAY 11 560851 11 MAY 11
  
  
  So far its all perfectly fine.
  
  Now I want to restore the data files and recover. So I ran:
  
  RMAN run {restore database; recover database; alter database open resetlogs ;}}
  
  This gave me the result below is going very well, but I get a final error, I think that the error is because its search for an archive log that is not in the backup set, but it should be. However, I think 560851 SNA is for a journal that had not yet been created on the old server when the backup was run?
  
  I address, how to fix the error? Its interesting to note the journal, "archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG".
  \2011_05_11\O1_MF_1_6_6WOK1X4W_. ARCH-recid = 10 = 750881741 "stamp is not on the old server or which explains why this isn't in the backup set.
  
  I can do an alter database open reset connects but Id prefer to know why its failure.
  
  
  Any help would be appreciated.
  
  ........................................................
  
  
  RMAN > run {restore database, recover databases; alter database open resetlogs ;}}
  
  From restoration to 11 May 11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\SYSTEM01. DBF
  restoring datafile 00002 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\UNDOTBS01. DBF
  restoring datafile 00003 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\SYSAUX01. DBF
  restoring datafile 00004 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\USERS01. DBF
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\SAT\BACKUPSET\2011_05_11\O1_MF_NNNDF_TAG20110511T163507_6WOC5CM7_. BKP
  
  channel ORA_DISK_1: restored the backup part 1
  room handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\2011_05_
  11\O1_MF_NNNDF_TAG20110511T163507_6WOC5CM7_. Tag BKP = TAG20110511T163507
  channel ORA_DISK_1: restore complete, duration: 00:00:55
  Restoration finished in 11 May 11
  
  
  From back to 11 May 11
  using channel ORA_DISK_1
  
  starting media recovery
  
  channel ORA_DISK_1: from the archives to default destination log restore
  channel ORA_DISK_1: restore the newspaper archive
  archive log thread = 1 sequence = 6
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\SAT\BACKUPSET\2011_05_11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_. BKP
  
  channel ORA_DISK_1: restored the backup part 1
  room handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\2011_05_
  11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_. Tag BKP = TAG20110511T163653
  channel ORA_DISK_1: restore complete, duration: 00:00:01
  archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
  \2011_05_11\O1_MF_1_6_6WOK1X4W_. Wire ARC = 1 sequence = 6
  default channel: delete records or newspapers
  archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
  \2011_05_11\O1_MF_1_6_6WOK1X4W_. ARCH-recid = stamp 10 = 750881741
  Cannot find the log archiving
  archive log thread = 1 sequence = 7
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command recover at 11/05/2011 18:15:42
  RMAN-06054: recovery of media asking unknown journal: thread 1 seq 7 lowscn 560851
  
  RMAN >
  
  Published by: user12173666 on May 11, 2011 10:28

  He asked all of the available archives, whenever you give the database recovery, he keeps searching for the next archives, actually these archives are not yet generated, then you can ignore.

  Now just connect to SQL and give

  SQL > alter database open resetlogs;

  It should work.

• Make a copy of the recovery media which can no longer be ordered from Toshiba

  I have Toshiba Portege M200 computer without recovery media. Because the computer is old media are not available to order from Toshiba.

  If I found a person who is the original owner of these media I could make a copy of it to use with my computer when I have a valid license for Windows and other software on the recovery disk?
  I don't volatile legal terms?

  In General, you can use a recovery of other media laptop, but there is the same model of laptop with the same hardware configuration.

• Cannot boot from recovery CD - error: PXE - E61: Media test failure

  Recovery CD (Windows XP home Edition) cannot start the Toshiba satellite A40 Model # PSA40E-0EWDE-AR (SA40-261), whenever I try to Boot From recovery cd I get this error:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.

  but when I boot from any other cd (windows ME, WIN 2 K, WIN XP Pro...) everything is ok.
  Any clue? Help me please
  Thank you
  Mesha

  Hello

  It seems that the player is unable to boot from the recovery CD and the switch to boot from LAN.
  The error PXE - E61 message because the LAN cable was not connected and the laptop is not able to find a source of network boot

  I think you should check the recovery CD and perhaps you will need a new

• Creator of recovery media from Toshiba regarding the issue.

  Hi, I have a new Toshiba laptop and I would like to replace Windows 7 Ubuntu (completely - there is therefore no left of files WIndows on a SSD). I used creative recovery tool of media I've found among utilities preinstaled by Toshiba and I created the USB recovery.

  I wonder, when I delete WIndows and install Ubuntu in place, is the USB I created what I come to Windows?

  In other words: when I want to go back and replace Ubuntu with Windows, boot from USB and execution of recovery will be all I have to do to get rid of Ubuntu and Windows only?

  Thank you

  > I wonder, when I delete WIndows and install Ubuntu in place, is the USB I created what I come to Windows?

  Yes, the use of the recovery media (no matter if its USB memory stick or recovery disk recovery) would fix the laptop back to factory settings.

  Factory settings means that you get the same State as at the first day of the purchase.

• 5 created recovery media as requested, however factory restore discs, 6 were necessary to my restore!

  I clicked on finish, as it were has no more records requested when burning a batch of 5 (as requested by the HP Recovery Media software).

  Now when I'm trying to do a factory restore, she prays for disc 6 which of course I did not.

  As I have re-formatted everything back a little, I can't use F11 (?) to restore everything back except for my records. My laptop is a CTO dv7t-4100. I live in Australia but a new set of recovery disks are shown only to residents in USA & Canada. Any ideas please?

  This can help others in the same situation. http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-62996-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_auen

• Unable to boot from USB recovery media

  I created my usb successfully recovery media using a pendrive of 32 GB. Of course, I don't want to test it. I started my ultrabook, and however, it would not begin the recovery USB. Clues? I pressed ESC several times and came in the start menu.

  F1 system information

  F2 System Diagnostics

  F9 boot device Options

  F10 BIOS Setup

  F11 recovery system

  You are the very welcome.

  A way of knowing whether worked or not, usb recovery flash drive support and is to make an another bootable usb flash drive to test whether or not it is the laptop.

  The fact that you could not start the flash from another PC drive leads me to believe that the creation of recovery has failed.

  Here is the link to the instructions and tools you need to make a bootable flash drive general.

  The two files that you need are at the bottom of the page.  The bootme.zip file is just the BACK files that you extract, copy and paste once the other file actually formats the flash drive to make it bootable.  In this way, it is a speedy BACK and from there you can just go out.

  I use this tool to update the firmware on HP Business Desktop PC processor.

  http://www.techpowerup.com/forums/showthread.php?t=47812

  Paul

• How to restore deleted files from Windows Media Player

  Hi, I decided to use Windows Media Player as a software for my Samsung s3 mp3 player.

  He acknowledged the mp3 player, so I've seen a few pictures, the mp3 player has (thanks to Windows Media Player), but I accidentally deleted.

  Now they are gone, and I can not find them...

  How can we get them?

  Hello Compdumb,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, I found an article that should answer your question.

  How to restore deleted files from Windows Media Player

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.