Create product recovery media does not work after restoring to factory settings

Similar Questions

• HP Envy k201na: my HP laptop does not start after restoration of factory settings removes the boot files

  I wanted to restore my computer laptop back to factory settings. So I went into settings and navigated to the update and recovery, recovery and then clicked the option restore factory settings. I had several partitions then asked me if I wanted to delete all of my drive or to remove all the windows disk was installed on. I clicked on the remove all option. Everything was erased from my laptop, I think that the boot partition has been altered to. Now when I start my laptop 0xc00000000f error code occurs and he said: 'you will need to use recovery tools. If you don't have any facility (such as a disc or USB device) support, contact your administrator for PC or PC/manufacturer. »

  

  An image of the system, that's what I used to fix my PC. I provided an image my PC with recovery media

• HP Pavilion G6 - 2221ES: recovery Partition does not work after update from HP.

  Hello

  I've just updated my laptop using this patch from HP: sp63774.exe

  It was supposed to fix a recovery environment that slows after reclassification of 8.0 to 8.1 Win Win

  Now, I can't get into the recovery Partition.

  It justs gets stuck after the message: "Please wait...". ».  I get the options to restore the system. Just a black screen.

  link to patch   (Section Software-Solutions)

  Help, please.

  Thank you.

  Hi @jose2016,

  Thank you for the update.

  Did you create your recovery media before making the update for Windows 8.1? If you create a recovery USB disk, then a labour recovery partition. Create a recovery USB disk (from support.microsoft.com). You can access the Recovery Manager of Windows? Computers HP - performing a recovery of HP (Windows 8) system. Another link that can help with the Recovery Manager's computers HP-HP System Recovery troubleshooting (Windows 8)

  You can try to do a restore back to before the update has been installed? Computers HP - using Microsoft System Restore (Windows, 10, 8)

  You said that you do not have a recovery partition. If you select disk management, should always data on this subject and he is in good health?

  Were you able to boot in safe mode?

  Have you tried to run the troubleshooter in Windows?

• Monitor does not work after restoring update

  Hello. I have a problem with my PC. My CPU is on but the monitor shows No Signal box. Previously, this problem seems too. But I fixed that by cleaning the RAM access (or other) Point. But this time, this method did not work. I have clear the CMOS, but the problem still not fixed. Oh yes, this problem occurs after the update. When updating, the update has failed and come back. When I start the PC again, nothing is displayed and there is no sound signal. Help me please. My characteristics are processor i3 Intel, ATI Radeon HD 5550 2 GB, DDR3 RAM 2 x 2, Windows 8 Pro 64 Bit.

  Hi Chloe,.

  Thank you for the update.

  I understand that since the DVD burner does not work, you are not able to create installation media.

  Put a USB installation media option. You can use both links to download and create below

  Update Windows with only a product key

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  Here are the steps:

  1. download and open the Setup file install Windows 8 Microsoft from the link above.
  2. Enter your product key of Windows 8 and start the download.
  3. once the download is complete, select install by creating media.
  4. Select the USB flash drive (it should be the default choice) and insert the USB key.
  5. accept all prompts to clear the contents of the USB key in order to start the process.

  

  

  

  

  

  Let us know if that helps. Keep us informed so that we can help you further if necessary.

• Default IP address does not work after resetting to factory default.

  Hello

  I have a problem with a HP LaserJet P2015 default IP address. If I unplug the LAN cable default IP is set.

  As soon as I plug back into the address does not work and if I print the summary page, now, there are whritten:

  IP address: Configuration (it does not stop to set up after waiting 1 hour it's still set up).

  and:

  Auto-IP: enabled

  I think that the Auto-IP (DHCP, probably) is the problem... but how do I turn it off?

  Thank you

  Jay

  Hello JayKM,

  Welcome to the Forums of HP Support!

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do the Commercial LaserJet Forums.

  Support of your product page can be useful in the meantime: HP LaserJet P2015 printer

  I hope this helps!

• Windows Update does not work after restoring Windows.

  I have a HP Mini 210-2080NR netbook with Windows 7 starter (31-bit). My hard drive failed and I replaced it. I ordered a USB HP recovery and then reloaded Windows 7 on new hard drive using the USB recovery drive.

  After reloading Windows 7, Windows Update does not work.

  This is the error I get:

  Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

  My connection is OK.

  I restarted my netbook and the error is the same.

  I reloaded Windows 7 and the error is the same.

  Any suggestions?

  Thank you

  eknaphus

  Hello

  You can try and install it and check:

  Intel Rapid Storage Technology

  After that it gets installed restart and check again. Let me know if this does not help...

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.

• Satellite L10 - 205 - product recovery CD does not work

  I buy a Toshiba Satellite L10 - 205 laptop from Dubai and since it was working fine.
  But now it became slow and I thought that to format using the original product recovery CD.

  When I format, it gives an error about 25% of the formatting.
  I tried to do it again and again, but the same problem persists.

  Which, in my opinion, I had the wrong product recover CD when it starts formatting he says loading Windows 98, but I have windows xp on my computer.

  Could you please give me the soultion or is it possible to get the right porduct recovery CD

  > Which, according to me, I had the wrong product recover CD when it starts formatting he says loading Windows 98, but I have windows xp on my computer.
  This is not a defect, Toshiba image that sits on the recovery disc for an old series laptop is based on Win 98 again Win XP is on the disc! So don t worry it s Win XP!

  I m not very well why you can not recover the laptop, but there are two options; HARD drive failure is so the laptop has been slower or the recovery disk is faulty (maybe a few scratches, etc.)

  In case you, it would be desirable to test the laptop with other bootable disks (MS Win XP or Linux) to check if the HARD drive is ok

• 10 Windows recovery media does not work on 3020MT tour

  I have a number of systems with lower upgrade Windows 7 installed by default. So I changed the firmware in the UEFI as shown:

  

  I then started the UEFI boot option dvd DVD, and then try again to install the OS, but don't have the option, I also checked the following article:

  

  but I don't get the option to install as per step 13, instead I get options for recovery / repair, same as you would get when running a recovery disk.

  I tried the firmware with or without Secure Boot enabled, that does not make a difference, I also tried to create a USB of UEFI since the DVD and use that same result.

  Finally if I go into advanced options, I choose the built in option to 'Recover' the OS from the disk, the problem with this is that it installed a clean install of Windows 10, no driver, no specific settings for Dell, no trial Office not installed that I simply want to activate.

  Thought I would try the forums before you call technical support Dell Monday.

  Any ideas?

  I would say that skip Dell support and use the installer of Microsoft...

  • No driver, but the few who are likely to be installed are fairly easy to install.
  • No Dell-specific tweaks not - other than Dell branding (which I doubt there is someone who would "want" that precisely), I'm not sure what you're talking about.
  • The trial is just the apps with installed free version Click-to-Run application - when you "activate" Office through Click-to-Run with an existing key, the files for the version that you select are downloaded from the web anyway, so there is really no reason to leave who oppose you.

  https://www.Microsoft.com/en-us/software-download/Windows10/

• G560 keyboard does not work after restoring

  Hello!

  I just did a restore using the recovery disks sent to me by the customer hotline of lenovo.

  the whole process went through and now it says:

  "LENOVO PRELOAD IS COMPLETE!

  Press any Key to Shutdown! »

  the keyboard and the touchpad does not, so I can't press a key...

  My question is, do I I just stopped the laptop by pressing the power button or deals that damage the recovery?

  Thank you very much!

  it solved!

  I pressed ctr + alt + delete and then the keyboard worked again and I could press a button...

  Thanks anyway!

• Tecra A3 does not work after changing the power settings

  I changed my power settings in my tecra a3 laptop and now it does not start correctly. wants to start but just keeps going back to press F2 or F12 it please help.

  Hello
  where did you changed them? In the BIOS or in the Toshiba HW setup?

  I suggest you go into bios after turning on your machine. You have to hit just F2 Ant then in the search for bios for setting "all default setting" or something with "bios setup defaults" to reset your bios settings.

  After that, your computer should start up again.

  Welcome them

• Re: WIRELESS does not work after restoring the system to the factory settings

  Hello

  I just had to reset my Toshiba Windows 7 laptop to factory settings, I backed everything up to an external hardrive beforehand. After the process that kept restarting my laptop on its own, he did this, while the default Toshiba program was missing (from the application of the box). He said not to interrupt or turn off the PC while it was running, but I couldn't stop it do it several times. The process finally ends the green bar hit 39/39 and let me come back to the office.

  It seems to be OK now, but I can't get online, I have connected to my wireless router and it says connected with an excellent signal but I can't do anything on Internet Explorer. I would like to re - download a few things such as Adobe Flash Player, AVG Free, Mozilla Firefox but can't even get anything. It's not even an error message that appears when I'm on IE.

  Can someone help me please?

  Tommy

  I hope that you can use your laptop by using the LAN connection.
  Have you tried to reboot your router?

• Windows Update does not work after restoring the system

  HP Compaq 6000 Pro, bought in early 2011. Windows 7 32 bit. I recently did a factory restore to return to a clean system using factory restore partition. The restoration seems complete ok, and I have a Windows 7 clean and functional configuration.

  However, the Update window will not work (and of course, it is now quite an old installation of Windows 7) it comes up with the Red Cross and the message "Windows Update cannot currently check for updates because the service is not running." Other notable issues that may or may not be related are: Windows Defender won't start not (0 x 80070564). HP Support Assistant reports it needs to update, but the update fails (because then it just says: it should be updated again)

  What I've tried so far:

  Verified that the BITS and the WU services are both actually run

  Uninstalled the McAfee antivirus software

  Tried to install Windows 7 SP1 directly (happens with "catastrophic failure")

  Tried Windows Update (wusa.exe) stand-alone installation / WU Readiness tool-fail (Oxc8000247)

  MS difficulty he said Troubleshooter it corrects problems, but nothing changes later

  (In short, tried all suggestions from MS support)

  It drives me crazy - any help will be appreciated!

  ISO should work, just be sure to download the version of Pro 32-bit.

• WiFi and BT do not work after resetting to factory settings

  Hello

  UH well, I was in the middle of my laptop computer cut to half way through the reset to the factory settings...
  So I turned it back on, but everything was gone.

  He kept saying to insert the disc. So I did, but all the Toshiba programs are removed.
  My wireless & Bluetooth don't work.

  Someone at - he had ideas please...

  Could you please post your laptop model and what OS you are using?
  Generally, all the drivers are placed on the European driver Toshiba page. So, you can download the WLan and BT as well.

• Recovery disc does not work after the failure of the system.

  Hello world

  I got an error yesterday while booting which says "not found no startup disk." I disconnected and restarted at a black screen. I panicked. I got out my hard drive and made sure it is properly connected, and it was.

  I decided to try to see if it was the operating system that crashed. I put my original recovery disks in the computer. Here are the ones I made when I bought the computer new in box Office Depot. I put the discs and the message "loading of system files", said. I thought I was home free. And then the error is come that indicates the serial number not recognized? Can someone tell me what I should do to fix this problem?

  After that I got the message. I turned the power to the computer is turned off again and put the disc in and nothing but a black screen. I used the recovery disc once before when the computer has a virus so I know they work. Any help will be greatly appreciated. Thank you

  Hello

  Seems to me that it is a corruption with the hard drive.   Check if you can access the SafeMode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can try a system restore by using the F8 key. http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Black screen problems are usually not repairable, because it might be a corruption with hard drive. And what about drive recovery, you might receive this error message because the drive is damaged. It would be good if you contact your manufacturer immediately.