restore problems

Similar Questions

• System Restore problem

  I try to do a system restore to an earlier date and when restarting the computer indicates that it was not possible and I have to try again. The same thing happens to me with all the dates available inside the system restore.

  Please help me some body.

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Time Machine restore problems

  Me again... still to try to recover my drive hard because I tried to make the Boot Camp.

  In preparation for boot from the external drive, I had a cool time machine backup of the system. The system was Captain El.

  When I started pressing cmd + R to choose the way to go, I entered the utilities disk and tried to format/erase the existing partitions so that one new partition could be created, and then I use boot camp to install windows again.

  Somehow after I did that and came back to restore options the system reported it no were not available to boot from the boot floppies and asked me to tie a boot disk. Having no other than the old drive boot disk that I had replaced out of the computer when he was a Maverick, I used as a startup disk and go to revive the position and where I chose what to do.

  When I choose now to restore from the external drive that has my time backup machine El captain on this program trying to install for a bit, and then he told me that ' year error occurred during the addition of a system of recovery on the destination disk. It then asks me to restart to get rid of the problem, and of course the problem won't go away.

  If I choose to reset the computer he'll want to maverick. I agree with going back that far and punting again and I'll probably have to do this because it appears that I have no other choice. I hope that I can install Maverick and then restore my El Captain off the external drive.

  Hello Farzad_K,

  Thanks for asking for help with Time Machine here in Apple Support communities. I am pleased to offer you things to check this.

  Since your Mac is fairly new, I recommend first start in recovery of the Internet. Here is the article on this subject: on Mac OS recovery. I know it says it's the Sierra, but the steps are the same for El Capitan. Use the second set of instructions for the recovery of the Internet with the keys: command ⌘ ⌥ (alt) Option and the letter R.

  For this with the drive installed that you want to install OS X El Capitan to. If you have changed to the older readers with the Mavericks, switch back, and then run the recovery of the Internet. This will fix your hard drive and then allows you to install the operating system from Apple servers. Then you can restore the backup, or try to run a Migration Wizard using this help article: move your content to a new Mac.

  Thanks again and relax your day wonderful.

• Safari-backup restore problem?

  My Safari 9.1.1 then the fritz starts 4 days ago.  It is not a problem extensive system... If I connect as a guest it works fine.  I can restore the settings of Safari from time machine?... If so what files should I try.

  Thank you.

  What do mean by "he went on the fritz? Tell us exactly what is happening when you launch Safari.

• session restore problems

  A few weeks ago, for some reason, FF 8.0.1 stopped working on my machine of OS X. (I used 7 and now 9beta as get around it). Since that time, I had a whole list of problems. One problem is that everytime I open FF it tries to open the session that crashed, no matter what I tried, it won't go away.

  This includes unselecting them the tabs before the restoration; This allows to load the tabs and then close them individually. I followed this with a good FF quit.

  Everything is up-to-date (software, FF, etc) so I'm not sure what's going on...

  It is possible that there is a problem with the sessionstore.js and sessionstore.bak files in the Firefox profile folder.

  Delete the sessionstore.js file [2] and files possible sessionstore-# .js [3] with a number and sessionstore.bak in the Firefox profile folder.

  • Help > troubleshooting information > profile directory: opens showing the file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Delete sessionstore.js will cause App Tabs and tab groups and opened and closed the tabs (back) to get lost, so you will need to create them again (take note or bookmarks).

  See also:

  • [1] http://kb.mozillazine.org/Session_Restore
  • [2] http://kb.mozillazine.org/sessionstore.js
  • [3] http://kb.mozillazine.org/Multiple_profile_files_created

• Satellite A660 Factory Restore problems

  I have a Satellite A660 Ref. PSAW3A-14V062 delivered pre-installed with Win 7 not provided, but a hidden partition with disk recovery files.

  Decided to do a restore to factory from scratch but ends of disk errors. Removed the HD and connected to another computer.

  Using Acronis Disk Director, I copied the hidden partition (HDDRECOVERY) to another drive and then formatted the drive and copied the partition hidden in it and reinstalled to the laptop.
  Downloaded an ISO image and tried to install it from DVD but received the message that windows cannot be installed on the HARD disk that the drive is about to fail.

  Bought new HARD drive and copied the partition hidden for her.
  I then tried to install from the DVD, but kept getting errors about unable to find files, after ISO more several downloads and burn 5 different DVD the furthest I got was the screen where it is "files", this remains at 0% and nothing else.

  I then tried a factory restore using the "hold 0 during startup", but when I took out the key pressed 0 when the Toshiba start screen showed that nothing happened.

  There was a small Partition 'System' on the original HARD drive I have has not copied. I have a few questions.

  (1) the "System" partition did not the files needed to start the factory restore and if so is there anywhere I can download these files?

  (2) probably a topic for another thread, but no clue as to why I have so many problems with ISO files.

  Cheers and sorry for the long-winded explanation.

  The installation of any recovery is quite complicated. It is designed to avoid a kind of manipulation so original recovery image can be installed either using recovery DVDs or HARD disk recovery facility which must be created with Toshiba recovery disc creator tool.

  To be honest, the whole story is complicated enough, but what confuses me, is
  > Decided to do a restore to factory from scratch but ends of disk errors
  If I understand you right, you have created a drive recovery, right? What exactly happens?
  You can use this drive with new HARD drive?

  This method with files recovery to cope with the new HARD drive does not work. You will not be able to access and begin HARD recovery disk image installation.

  If you have a new HDD only how to install the original Toshiba recovery image is to use the recovery DVD disc.

• System restore problems

  This morning.... woke up went to computer it fine

  so of the error messages in the lower left corner by saying that this file and this file was corrupt - that was the message of the yellow trianage.
  While the "record all users ' documents and settings was corrupt.

  If a system restore one day last week - when I knew that everything was fine. This succeeded, but when the thing started again a lot of software files were missing, dial internet connection, and the menu was a fifth the size it was before - a lot of things went like all programs:

  all programs
  Accessories
  System - missing tools

  Then I tried to book the system restore and it works not - a reported that he had failed. So tried to do a system restore I left yesterday. If not what should I do?
  The file with all of your software is still there, but it's reinstalling Dial etc.

  Any advice appreciated

  Hello

  As far as I know the System Restore tool restores the operating system to the point of beginning and all files.
  If you have installed the files or have changed some settings after the restore point, all these things will be deleted after you use the System Restore tool.

  A similar problem had happened to me. I saved a large number of files on the second partition, and after using the System Restore tool all these files and data that was created after the restore point has been deleted.
  There is nothing to see

  If you use the tool at any time, you must create several restore points.

• backup/restore problems

  So, recently, my iPhone 6 had a lot of questions (most applications would be closed from the opening, I couldn't update apps, all the texts and iMessages disappeared, Messages turns uses a lot of storage despite the removal of all, etc.) and a person on one of these forums recommended to back up the phone, restore factory settings and then restore the backup to the phone. I got no problem with that, until I tried to restore the iTunes backup. When I try to do, I get the following message: "iTunes can't restore iPhone «...»» "because the backup was corrupt or not compatible with the iPhone, which is being restored. "I read that to solve this problem, I just need to delete the backup but the problem is that it's the only backup I had to restore my phone. Is there a way to recover this backup or is my only option again?

  Thank you in advance.

  It seems that the backup could have caused all the problems you had. Backup, restore factory settings and then restore the backup are a standard troubleshooting step, but if the backup is corrupt, you can not use and you can not get corrupted.

  You can restart all and try again, but I think that the results will be the same. You need to restore as new.

• Restore problem

  After a disastrous accident (office a6050y) which has corrupted the registry I got a message to restore the original state. And an offer to restore my files that I made. It was a program of HP. Now, I have installed Windows 7 and have a problem, try to restore the files. I think the hp program was the computer program of health. Anyone able to help me I would be really grateful. I did a clean install and have the files to restore on an external dr.

  Thank you

  * beep *.

  where - save you your backup files? try to use the Recovery Manager to recover the files or try to search the backup.exe folder you saved you save

  Try this http://support.hp.com/us-en/document/c01673043 document

• Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

  Home built PC

  Card mother Gigabyte GA-Z77MX-D3H

  Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

  Windows Pro 10

  Windows Home Server 2011 on LAN

  I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

  All good advice?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Oblivion save games system restore problem

  So, a month ago, I deleted some files that I thought were unnecessary. Well after that I deleted files and I tried to run Oblivion he says something like this: "missing bink32" or something like that, so I took my save games and made copies and uninstalled the game and then I installed back again, I placed the games in the right folder backup, this time, the game worked fine , but when I tried to load my most recent backup, the game said this: "something is maybe missing" or something like that and then he asked if I wanted to continue and I clicked ok. The game starts to load the backup, but every time I tried to load the game crashed. A few older stops worked well, but I really want to get the most recent return. So took me about a month to put the process on the issue, I asked my friend that what I have to do, and he said that I should try to use system restore, well, I got very happy about this, but when I tried to use it, I realized he would restore only as two weeks back , and uninstalling happened like a month ago, so I'm asking what to do and how to get my back stops. Thank you and sorry if my English was bad, it is not my mother tongue.

  Hi leibakki,

  Please use the forum for Support of Vista,

  I can offer you some advice on a possible solution, but it is outside the scope to our support forum.  We can help you if you are having problems with the game play in Vista, but no recovery recorded the game files.

  Here's something you might want to try, keep in mind the system restore will be only restore system files.  All other files will be NO affect, so very probably that your saved game will not return either.  If you can locate the game recorded in his file, try right-clicking on the file and select the tab from the previous Version.  If there are dates, you can restore the retroactive to the date that you choose and I hope this will allow you to load your game.  Sorry, we can't help you much with the problem, but I hope that help.

  Let us know if it works, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Task Manager/System Restore problems

  I have Windows XP - from one day to the next, the Task Manager has changed appearance. All I can see are the processes. It does not show running programs, refresh, stop, etc..  So I tried System Restore and cannot restore.

  Looks like you can be / are the Task Manager running in mode tiny/small footprint.

  If you double-click on the empty space around the border of the screen of the Task Manager, it will change from normal mode, and then you should see the tabs you are accustomed to seeing.

  You can read about it here:

  http://www.BROADBANDreports.com/FAQ/6905

  If your system restore is also broken, why don't you start a new question/topic/thread for this since it's a different problem.

• driver and system restore problems.

  When I turn on my computer it say the perimeter is incorrect. the black screen appears and flashes at the top saying c: Windows system32i need help because I can not restore the system have already tried. more I want to know if the "lodge" and other protection against the virus is the cause. I had the i had the mcafee and someone had to work on my computer and they took off my mcafee and put their own on. now I cnt download my mcafee it will not read it. does nothing. so I dnt want to take protection I cuz I dnt want to liquidate without any. Finally, I can't even install or open any cd rom I have cuz of this problem on my computer. Help, please

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what anti-virus software is installed on the computer now?
  4. What is the accurate and complete error message that you receive at startup?

  Step 1: Search for the issue in the clean boot state.

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Step 2: Try the fix tool from the article below to fix the CD drive question.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Backup/restore problem: some files not restored

  My hard drive died.  Fortunately, I had a recent backup.  I managed to restore most of my files and also finally got access to my file of Microsoft Outlook data (due to gurus on these forums).

  I'm now trying to recover the data for my financial program.  I checked the files in the backup folder, and they understand the data I want to restore.  However, when I go through the restored files, I don't find them.  I try to avoid having to enter again about 1 1/2 years of data.

  The backup was performed on a laptop Dell running Vista Ultimate and was stored on a USB external drive.  It was made using the backup/restore program that comes with Vista.

  Any suggestions?

  Thank you in advance.

  I'm now moving extra files on my USB key for added security.

  I would like to know if there is an easy way to remove duplicate files that take up more space on my hard drive.

  However, the original problem is now solved.

  Thanks again.

• Backup and restore problems: your backup configuration is not valid. Please review your backup settings (0 x 81000029) Please try again.

  Original title: back up and restore the problem

  I'll give you a full explanation on what is my problem, so that it will make it easier to answer if all goes well. I use Windows Vista and decided it was time that I backed up my files. After clicking on the tab "back up files", I then got a dialog box asking "how many times you want to create a back up" so I chose "per week" on "Sunday" at 19:00. "There is a message that goes down"because it's your first backup, windowws will create a new, full backup now. However when I click on the 'Save settings and start backup' tab I get the message "file back up could not save your automatic backup settings for the following reason.

  Your backup configuration is not valid. Please review your backup settings (0 x 81000029) Please try again.

  Someone has an idea what is the problem?

  Hi frankspencer,.

  Step 1: You can follow the steps mentioned in the article below

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer

  http://support.Microsoft.com/kb/950167

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Backup and Restore problem

  I have created an incremental backup for a while (since January) on a disk external drive plugged my USB2.0.

  Recently my computer crashed and I did a new install of Vista.
  After the update to Vista, I decided to restore my files from the outside.

  I did the restore advanced, and it finds all the files and the backup. But when I continue to make the effective restoration, it gives me a "the backup file is not found. Check your hardware configuration or restore from a backup different (0x8100001A). »
  I checked the permissions and all members have full control of everything.

  I also tried to change the drive letter, but no dice.

  The strange thing is that concludes the backup, and if I click on "Add files", he finds my backed up files! But when I proceed to restore, it only will not do.

  Any ideas?

  Hi OrangeL89,
   
  This problem can occur because the Mediaid.bin file is missing. The Mediaid.bin file may be missing if you move the backup directory to another location.
   
  If the backup directory is on a different drive or a different file share, and the original backup location is still available, follow these steps to resolve the problem:

  1. Search the root directory of the drive or the file share where the backup was originally stored.
  2. Copy the Mediaid.bin file.
  3. Locate the root directory of the location where the backup is currently stored.
  4. Paste the Mediaid.bin file.

     For example, if the original backup location is drive D and that the backup has been moved to the E drive, copy the Mediaid.bin file located in the root directory of drive D to the root directory of drive E.

  5. Try to restore another backup file.

  Alternatively, you can follow the article below:
   
  Error message when you use the option restore files to restore a backup file on a Windows Vista-based computer: "the restoration has not completed successfully. "Error code: 0x8100001A.
   
  http://support.Microsoft.com/kb/KB940263
   
  Hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support