restore system and Windows Update

Similar Questions

• Cannot use restoration system or Windows updates: 80070017 error?

  I want to do a system restore because my system has encountered serious problems.

  But when you try to restore fails and I get the error message: "data error (cyclic redundancy check). (0 x 80070017) »

  I also won the same "80070017" error code when I try to install the updates using Windows Update utility!

  A little research told me that it may be corrupt or missing files on my, so I run chkdsk.exe and scheduled a restart it control and repair.

  Chkdsk.exe ran on starting and from what I remember there were replaced for some reason files any.  However, it took a long time so I left during the night and woke up to find my loan to connect system. I'm not entirely sure of what were the errors it and whether or not they have corrected!

  So I ran sfc/scannow and these are the results: abbreviated errors - complete (.txt files)

  Needless to say what these two did not help.

  If anyone has any ideas on how to get system restore to work that would be great!

  Thanks, Rich.

  Well, the Diagnostic tests showed a pass on my HDD without any problem when I ran origanally.  So I decided just to do a reinstall of Windows that I wasn't getting any case with the restoration.  But I couldn't do that, that failed too!  Another error code to add to the collection

  In the end I had to use Dban to completely erase the disk as it seemed the only choice, Dban found no errors of disc during this process either.

  After said and done, it looks now my drive has bad sectors on it, during the installation of Windows, he warned me my disk was not and the WD Diagnostic tests also shows a failure with number of sector transferred, value - 132, 140 threshold, worst - 132.

  Guess it's time again to HD.

  Thanks for your help!

• 32-bit Vista, System Restore and windows update are suspended.

  This problem started happening almost two months ago. When I turn off computer and windows update tells me that it is updated, I leave. Ive come back hours later to see that my computer never updated and turns off. Ive tried click on windows update to update while I was connected and it still crashes just forever. Today, I think I discovered perhaps the underlying problem. Finally, I got fed up and decided to do a system restore, after hours of research and try all kinds of solutions on these forums (none worked). So now he is suspended from the system restore. Suspicious to me that when the windows update crashes is on the screen where it says create restore point.

  What can I do?

  I do not want to download all that regcure, II _ I chercher search on google, seems tgtbt and I don't want to take the risk of harming my system.

  can anyone help please?

  Thank you very much.

  Hello

  You should go to the system manufacturer's website and get the latest network drivers wifi and card.

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each driver.

  Maybe the other pilots. software and updates to the BIOS, you can get there.

  Control Panel - Device Manager - double-click on a device and check the version.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  then also make - close all regular programs

  Start command - in the search box type-

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or you can copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  Rob - bicycle - Mark Twain said it is good.

• My system crippled Windows Update

  my system crippled Windows Update. Lights on. All the tests of transmitted material. Try to restore but it does allow me to enter a restore point and none come up when I click on the show more restore points box. What should I do?

  If you are unable to find a repair disc, you will have no choice but to run a factory restore.

• Windows Vista - Windows Defender error 0xc80000222 AND Windows Update, error 800800005

  I replaced the hard drive on my HP laptop and used the recovery disks to restore my computer to factory setting.  I also uninstalled Norton Anti Virus, download Mozilla Firefox and downloaded Avast Antivirus.  I tried to update, but got 2 two errors - Windows Defender error 0xc80000222 (the program cannot check the definition updates) and Windows Update error 800800005 (Windows could not search for new updates.).  I even tried to install Microsoft Fix to perform diagnostics, but it does not have (we're sorry, but Windows PowerShell could not run).  My system sign says that Windows is activated.  In the end, I want to use my upgrade for windows disk 8.  I used these discs before recovery without any problem.  Thank you.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error."

  Original title: error code 88982F04

  Received this error code when trying to install win 10.   the message was ' ' has no 1 update "and"windows update has encountered an unknown error."  I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC.  Can someone please help with an answer.

  Thank you

  Delete C:\$WINDOWS.~BT

  Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.

  

  If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Windows and Windows update install error 641 that install the windows service could not be accessed

  Original title: Windows Installer and windows update error 641

  I get the following error when I try to install the latest Java Update. "The windows service install could not be accessed. This can happen if windows install is not properly installed. Contact your support team. In addition, I now have 14 exceptional installed updates which always fail with error 641. I have Vista 32-bit SP2. In addition, in respect of the services Windows Installer does not show so I can't restart. I tried all the other patches. Any ideas?

  So what do you suggest...

  Have you tried the resolution in RESPONSE to my colleague Maurice message in this related thread yet? -Online http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  Have you contacted Mechnic (iolo.com) support system yet?

• I have formatted my system and windows reloaded. Then, I clicked on it somewhere (do not remember on which/wher) now the systym not to see any how removable storage or don't want even to open a CD I put in...

  I have formatted my system and windows reloaded. Then, I clicked on it somewhere (do not remember on which/wher) now the systym not to see any how removable storage or don't want even to open a CD I put in...

  As you reinstalled just Vistas, you would have a very limited number of Restore Points!

  Try the system restore.

  If this does not work, and you don't know what you were doing, reinstall it again.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• What is the difference between Microsoft Update and Windows update?

  My buton start brings up "Microsoft Update" and "Windows Update". What is the difference between the 2? If I click on do get updates for both?

  Hi jt3219,

  Yes, you will have updates for each of them when you click it.

• I had to reinstall xp pro and windows update said itn has encountered a problem and cannot display the page.

  I had to reinstall xp pro and windows update said itn has encountered a problem and cannot display the page. I have sp2, what don't get me?

  Please see the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3/a71b55ee-10d4-410C-8b0b-a2114f7d8b94 >>

  UTC/GMT is 07:51 on Wednesday, August 15, 2012

• I get the error of certicifiate security and windows update error?

  I get the error of certicifiate security and windows update error?

  Hello

  1. What is the full error message?

  2. What is the error code that you receive Windows updates?

  3. who is the antivirus installed on the computer program?

  4. are you aware of changes to the computer before the show?

  Discover the history of update and update verification is the origin of the problem. Also, note the details of the error.

  Check out this link to do the same thing:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  For the security in Internet Explorer certificate error, you can perform the steps described in the article.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  http://support.Microsoft.com/kb/931850

  See also:

  Certificate errors: FAQ
  http://Windows.Microsoft.com/en-in/Internet-Explorer/certificate-errors-FAQ#IE=IE-9
   
   
  Hope this information helps.

• Section user and Windows Update missing in the setting of the computer in Windows 8, as well as other errors.

  Section user and Windows Update section of the computer in Windows 8 setting is missing.

  Open Control Panel > user accounts > make changes to my account in the computer setting.

  "Page not found. Sorry, the page you requested is not available, or you have found an outdated link. "is displayed.

  I already tried Microsoft scanner security, sfc/scannow, auto repair and record using a hidden administrator account.

  My power plan option page is also absent and when tried to open the parameter, "unable to open the access control editor. the activation requires the display name to stand under the CLSID key. Also, while trying to open the properties of the network connection, "an unexpected error has occurred" appears. I don't know if these problems are related.

  I agee with dietydiablo, it was not pleasant to have to do a refresh and reload everything.
  Also use even win 8 Pro with WMC.
  I could not afford to wait and to solve the problems, and the update was a faster option. But I keep an eye on it now that if it happens again, I know when it happened.

• critical error after system restore and windows updates

  I cleaned up my old computer and did a system restore.  Subsequently, I have install windows to perform automatic updates.  The computer detected 37 windows updates and install them.  After a successful windows install update, the computer said I had to reboot so I did.  Now the computer tries to start but then comes a blue screen with a bunch of text and then said: critical error.  I tried to do a system restore, and when I get to the part, he begins to restore and gets to 13% and then says critical error and I have tried to try again, but nothing happens.  Stuck... Please advise.

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a repair system restore / boot:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• System Restore and windows updates

  I tried to uninstall Windows LiveOne care safety Scanner because I uploaded it by mistake and it does not work for 64 bit Windows 7 computers.  It wouldn't uninstall.  So I tried to restore my computer to an earlier time.  Two questions:

  The Safety Scanner LiveOne is still there and I still can't uninstall it.  Any suggestions on how to get rid of it?

  The restore point was before the latest Windows updates.  Would updates have been deleted by the system restore?  I checked to see if I have the updates and I do, but I don't understand how that's possible.  No explanation?

  Just to let you know that I FINALLY solved my problems and was able to do a system restore which got rid of the Analyzer.  First of all, in order to make a system successfully restore, I had to disable self-protection in my anti-virus program.  Then I took a better dot restore by running the "scan programs affected" before restoring.  Who showed me what restore point would eliminate the safety scanner.  I did all of this while being disconnected from the internet.  It worked.  The latest updates of Windows have been removed also, but I downloaded them again, so now my computer should be back to where it was more or less before I downloaded the scanner.

  I learned another thing, and this does not assume that a program for Windows 7 is automatically correct for a 64-bit Windows computer.  I consider that it could not be.  It would have been nice if the download scanner security indicated in a very good location that was for a 32-bit computer only.

  Thanks for your efforts.  They are appreciated.