restore the cloud files
How to restore files in the cloud
Hi kebear,
I want to mention that once the file is deleted, you cannot restore it in the clouds.
Sorry for the inconvenience.
Tags: Adobe
Similar Questions
-
Restore the backup files. Windows Vista Expert needed!
Help! Recently, a virus wiped out my operating system (Windows Vista). C drive my PC had literally nothing about it. Then I got a new VISTA OS installed by a repair shop. I tried to restore my previous configuration from the backup I had on an external drive, using the Vista Backup & Restore utility. This "worked" except that he restored the backup files in a separate location on the C drive. Using the windows Explorer I see all those files that have been restored in a folder named "Thom".
However the new Vista installation has the user name "Thomas" where a configuration complete, (Documents, Favorites, desktop, etc.), was created. When I connect, it's the config I see (new office, new files and folders for this new user, 'Thomas'. I want to use the configuration, (files, folders, office computer), under the former name "Thom", not this new one, "Thomas."
I'm afraid to just delete the files under Thomas I'm afraid I'm going to destroy my access to Windows in general. Currently, I show only a user account in the control panel. I don't have the 'Thom' user in the folder of the user within the new configuration. How to delete files and folders under Thomas and use files and folders in the folder named Thom that is located on drive C?
All restoring the backup files are there, they show just a folder on drive C, titled "Thom". When I connect to my pc it takes me to your desktop created by the new facility. I need ALL the files in the backup (office, e-mail, files & folders), not the Setup program created by the installation of the new Vista. I want to be able to connect to windows and have it use the backup files, which are located in this folder named "Thom" which show on the C drive.
Can I simply combine or merge or copy the files in the folder 'Thom', I want to use in the files of the same name, (contacts, documents, Favorites, desktop), which are under the name of "Thomas"? Can I remove folders under the user 'Thomas' and all it's files and records and hope that windows then takes me in the files that I want to use?
I use my laptop, (HP Pavilion, 64-bit), for business and I'm dead in the water until I can access my old configuration. I am on day 5 of this disaster and I am desperate, please help!
Hello Reggie999,
Thanks for the return of the response. You can move the files/folders in the 'Thom' folder in your new user account 'Thomas '. Or another option would be to create a new user account and call it what you want, then move the folder in this user account.
If you create a new user account and move your files/folders to this account, it would be nice to delete the user account 'Thomas '. Just make sure that you have all of the files in the profile that you have recently created/added.
New profile:
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
-
Hello
Initial situation and config:
Server: Win2k3 Sp1 32 bit
Database: 10.2.0.4 Standard noarchivelog mode
RMAN catalog on different server.
Cold backup
Therefore, I was invited to do a restore from a backup of database. What he needs, it's to restore the controlfile, spfile and a data from a backup file complete performed via RMAN. He does NOT INTEND to use them, they just want to see their restored from the backup.
Restore the spfile and the controlfile is not a problem, and I was able to restore them to a Test directory. But since I can't restore datafile 1 to 'C:\dest', I googled how to make these.
I came up with these, which I think who should restore a data file to a different location, but I don't know if it's okay. And since I started on the database server, I prefer to ask first.
The value of newname to 'C:\datafiles\datafile1.dbf' to 'C:\Test\datafile1.dbf ';
restore the data file 'C:\Test\datafile1.dbf '.
Would this work? It must be run with the open database altering State and work and will not somehow it. If not, can someone help me here? The only thing needed, he did restore a data file just to get...
Thanks for the tips!Add this
RMAN > run {}
value of newname for datafile 'C:\datafiles\datafile1.dbf' to 'C:\Test\datafile1.dbf ';
restore the data file ' C:\Test\datafile1.dbf';l
switch datafile;
}It will update the control file with the new location of this data file
-
How to restore the Cloud?
I had to restore my hard drive. How can I put everything I had into the cloud on my hard drive?
-
Help restore the temporary files
I just restored my Dell Dimension 4700 to factory settings, but before I did, I used the file and Transfer Wizard to transfer all my files on an external hard drive up, but I don't know how to restore them now that I am up and running again. They seem to be in Temp folders. Any help ASAP would be certainly appreciated.
External hard drive LaCie and Genie Backup Software that comes with it is what the Temp files are on (at least this is what I think it is). The files settings and Transfer Wizard helped me transfer my files before I restored my system to factory settings, but I do not see how to restore now. Help
Brooklyn Babe
Babe from Brooklyn,
All you need to do is to run the transfer Assistant again, and when it starts it will ask if it's the new pc or old. Say that it's new and then he will be asked where the files are located and you direct them to the reader. NOW, I did this on a pc once and had a little problem with the service pack level. The SP should be the same as on the old machine. for example, I saved on SP2, and I tried to restore the SP3 and it wouldn't work. I had to remove the SP3 and then restore. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria! -
I am new to Windows Vista, but relatively competent in older versions. I installed the software on my new desktop computer. I am the only user on this computer and I have administrative rights. I installed the software in the Program Files directory. In the software, there is a folder for the working data file. I now try to 'restore' my data on this new computer file so that I can start working. I get an error message that says "you don't have permission to save in this location. Contact an administrator. "I have considered similar questions on this site and followed the advice to take possession of the file without success. I also created a new folder on the D drive, thinking maybe Vista I just wanted to keep C clean, but it gives me the same message. I can't save to the folder I created. Any advice?
Program Files is a protected directory. If possible you create the working folder for the data in your user account instead. Is it possible in the options of the program the program in a directory of your user account? Or, if you think that any other user you may need to use this program, you could create the directory Public. MS - MVP - Elephant Boy computers - don't panic!
-
When you try to restore the backup files, receive the error code 0 x 80070015 in Vista
I backed up my system on an external hard drive to reinstall windows vista home. When I try to restore the files to a backup location get a meesege saying device is not ready and the error code 0 x 80070015. I was told that vista home edition is unable to restore files, then why allow them to be saved as. I really need to restore my files back. Please help me...
Try to start safe mode and see if you can restore from there. This was recommended to someone else with the same problem and same error message and it worked - so it can work for you (but no guarantees).
I hope this helps. If this isn't the case, after return and we will try to find another solution.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
does not restore the system files after clean install
When I click on the HARD drive which has my backup file, it says that "windows could not find and backup sets on e:\.» Please selection elsewhere. "When I click on"Refresh"this disc shows up... again. When I look at the contents of the disc there is a file named: N360_BACKUP, however it will not recognize it, so, not restore it.
Is there another way to restore my files? I was really counting on this form of backup, and if I can't restore it, I lost all my emails, email addresses, contacts and favorites for the past two years, no to the meniton photos, music, etc.
I have looked at similar positions here and tried the suggestions in them with no luck.
Hello Terryjoe,
Thank you for your message. The N360_Backup referred to Norton 360. We will be more than happy to help you to restore your data, please answer a few questions first well. What version of Norton 360 backup/restore are you using? Below are the steps for version 2:
1. go to the folder C:\Program Files\Norton 360\Engine\3.x.x.x, you will find a tool Arestore.exe (3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)
2. navigate to the folder C:\Program Files\Norton 360\MUI\3.x.x.x\09\01, you will find an Arestore.loc file ((3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)
3. copy Arestore.exe and Arestore.loc to the root directory where you saved the backup created using Norton 360 (the long file aside the N360_BACKUP) and run Arestore.exe. It will look in the N360_BACKUP folder to your backup set.In your case, you must copy Arestore.exe and Arestore.loc to the external hard drive where you have the file N360_BACKUP. Double-click on Arestore.exe, it will work and restore all your saved data.
If this does not work, go to the next series of steps...
4. If she fails to find your backup set, you must delete the corrupted catalog file.
To delete a catalog file corrupted, go to the N360_BACKUP folder. There should be a folder with a long alphanumeric name, open that folder. You can see a file named backup.@db. It is the catalog file. You must move this file in this directory (put on your desktop for added security).
5. Once backup.@db has been deleted, go back and try to run Arestore.exe from the root directory.
Note: This process may take some time.
http://community.Norton.com/Norton/board/message?board.ID=Norton_360&message.ID=14505
See you soon
-
How to restore the default file for .lnk for unknown Application
I used the setting of the control panel and tried to change the default program for the .lnk file. The default for .lnk originally was "unknown Application". Bad I clicked and changed the default to "Notepad". Now, most of desktop icons is appearin in the form of notebook. I can't restore the defect of unknown Application.
Go to this page: http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html
To half way down this page is a download link for LNK. Which will restore your association. -
restore the .mdf file association
I have ignornatly tried to open a file .mdf to SQL Server by using Access 2010. I missed the little box that says use always! How to restore the association .mdf to its original as well as the appropriate icon? Thanks for any help.
Hello
Method 1:
Follow the link below and follow the steps mentioned in it. Check if those contributing to the issue of the attachment.
Change the programs that Windows uses by default
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
Method 2:
Follow the link below and follow the steps. Check if it helps.
To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
How to back up and restore the registry in Windows
When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
http://support.Microsoft.com/kb/950505
Let us know if it helps.
-
I loaded Adobe Creative Cloud and programs.
Files are not updated to the Office of cloud or reverse!
I cofoot and pasted the files in my documents on my new cloud drive.
All the files are there and the cloud (menu bar top) says that everything is sync has... I tested my laptop, everything is there.
I do not have indicators sync on my documents on my hard drive.
What did I do wrong...
All programs that are running and the current operating systems.
Thank you
Michelle
Moving to File Hosting, synchronization and Collaboration
Hello
Hope that helps!
Kind regards
Sheena
-
move the cloud files account different cloud
Hello
Inadvertently, I have two different accounts of CC. One account was created when I started using the mobile app 'Ideas' several years ago. I have a hundred drawings stored on the cloud under this code. I also created a profile when I bought a membership CC with Creative Suite (paid in advance for a year - in February). What I would like is to have the folder 1 CC (the one with the designs) available when I am logged in as the user 2. My first impressions are a) cancel the membership on the 2nd account and sign up for the account of the 1st account. It would probably cost me money, but it will extend my subscription of 2 months. (b) find a way to save files CC (in their original format, not only in JPEG format) on my hard drive, so I can sync it with the 2nd account.
I would appreciate any feedback or advice I can get. BTW, I already tried to go through customer on this subject and they were unable to help.
Thank you
Christa
Since the page creations site active CC to https://assets.adobe.com/assets/mobile Mobile, you can use the Send link to make a public link to the old account with the files of ideas and then use Copy creative cloud to save in the new account.
-
Restore the control file considerations
Hello expert,
Assumpition condition is:
All the data files and the redologs are not damaged, but the controlfiles are damaged. We must restore the controlfile autobackup with the following command:
RMAN > STARTUP NOMOUNT;
RMAN > backup RESTORE CONTROLFILE AUTOMATIC;
RMAN > ALTER DATABASE MOUNT;
RMAN > RECOVER DATABASE;
RMAN > ALTER DATABASE OPEN RESETLOGS;
Use of rman RECOVER, DATABASE redo logs to roll changes forward to control files. Can you explain what changes can be included? (Currently I only have one example: we add the new data file once the backup control file.) So we need roll forward the changes to control the file on the new added one.) Other examples?
Thank you and best regards,
Tong Ning
Examine the contents of the controlfile. He has the list of data files, the list of the archivelog files and list of rman backups.
Archivelogs would be saved in the controlfile so that they can be applied.
What about backups? Subsequent backups would certainly no longer be in the controlfile.
Hemant K Collette
-
How to restore the signature files?
I had to change my ID to connect to my PC. When I go to sign documents (Place Signatures) the signing of files is more displayed. I know that they are always on the PC because nothing has changed other then that I am logged in as. How to restore the existing signatures without recreating them from scratch? I have variations depending on what sort of documents HTML I sign and they took a lot of work to get right.
Connect with the old ID.
-
How to restore the PSD file accidentally crushed by preview after the closing?
Hello
I recently registered and closed a file psd with many layers, and now when I opened it again it is a flattened image. According to me, which may occur in the East after closing photoshop, I wanted to take the last look at the image and opened it in preview. After saw closing and stop of my laptop, I have opened the image this morning and now it is flattened but still a psd. Usually an excerpt asking you if you want to make changes to the images, but I never got a notification (recently updated to Yosemite, then maybe this feature is no longer available)
Is it possible to restore the psd for the last time that I saved it in photoshop? I heard that there is a way to read your story/brush strokes in your last session (scripts?) but I'm not entirely sure of how this works. Help, please!
Thank you ~.
Problem solved!
It turns out that Preview has the opportunity to restore the images to what they were before the changes have been made. By doing this I revenue the psd file flattened (flattened during the rotation of the image) to the original with layers. For the future I will make sure that all of my images are locked in the window.
Thanks for all the help, I really appreciate it!
Maybe you are looking for
-
Airport Extreme appearing does not in Airport utility
Airport Extreme is connected to the internet but will not be displayed in the Airport (see image below) utility. My home network consists of the following: Cable modem Comcast Arris TM722 Airport utility to view an IP from Comcast ending 1 Now, it di
-
Acer Aspire one 722 / is the sound card removable or welded.
I need to know if the card its 722 is attached to the motherboard or a plug-in.
-
Outlook express seems to have died on me, once I had rebooted comptr to clear a Trojan bug, this time happened around that e. o. has been changed to live mail? What's happening?
-
I use microsoft picture it, version 2000. This software has been a recurring problem, first of all just slow down my computer when saving a photo, now not even open. I have over 3000 photos saved in this version. What should I do, Ken
-
Connect NMH410 directly to PC via USB
Hello How can I connect NMH410 directly to your PC via a USB port? Do I need additional adapter or ways to work around? Thank you!