Restore Windows 8.1 without disks on the new hard drive on laptop Pavilion g6

Similar Questions

• How do I reinstall Windows 7 Upgrade disk on the new hard drive

  Hi all.
  I had a hard drive crash on my Dell XPS420 who settled with Vista. I've upgraded to Windows 7 (from the offer of activation of 3 site) about 18 months ago. I am trying to buy a new hard drive and install Windows 7 onto the new drive. I only have 7 disc ultimate improvement. I don't have a Vista disc. What is my best course of action? Thanks in advance for the help & support.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Resources:

  See the instructions in the thread following the reinstallation of Windows Vista:

  http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

• Install the new hard drive to laptop help!

  I have a windows 7 HP Pavilion dv6-6170us, with a 750 GB hard drive. I want to install a new hard drive I bought is a 1.5 TB hard drive. Now I have already that I tried to see if it is from the hard drive new larger East and I unplug the old hdd and put the new and it fits. However, I've not started because I don't know how recover/install new OS on it.

  What should I do on my previous hard disk, because I know that my old drive hard as a recovery partition. Or do some recovery disks? I have to save my data to search for instructions on how to install os or the hard drive again.

  At the bottom of the article here:

  http://support.HP.com/us-en/document/c01867418

• Restore Vista Premum (32-bit edition) for the new hard drive from the laptop when original disks are lost?

  Hello

  I'm trying to upgrade from my son's laptop computer and want to replace the current drive with a much larger.

  It is running Vista Home premium Edition (32 bit) and he lost his records came with the laptop: I can do?  I bought Windows 7 Upgrade and a disk hard sata 500 GB, but I need to get Vista on the new drive before Windows 7 readers.

  I backed up the data using Windows Easy Transfer for issue restores the operating system.

  Please note that this is a laptop, I can only have a hard drive up both and I don't know how to get the operating system to the new blank disc? I can create a recovery on a DVD disc / C or something Vista or a 3rd party utility?

  Any help is greatly appreciated!

  Contact the manufacturer to see if you have a recovery Partition and if it can create recovery discs.  If so, create the recovery disks and you will be able to use them to restore the system to factory conditions once you have installed the new drive (but you may need to install the new Vista compatible drivers for the new drive as the recovery disks can have only those for the old disk).  Otherwise, contact the manufacturer and get a set of recovery (at a modest price) discs and use them to restore the system to the conditions of the plant on the new drive.  When we talk to them, confirm that their recovery process allows you to install new drivers for the new drive hard during the process and exactly how do (or it doesn't work - so be sure to check it out).  We cannot help you with recovery of the manufacturer process as it their not Microsoft.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pavilion g6 2301AX: System Restore doesn't work is not on the new HARD drive

  My factory installed HGST HDD is not short DST check, so I bought new internal HDD of WD5000LPCX. I did the recovery DVD windows 8 long ago and tested several times.

  The problem, I do face is, after I ran the system recovery (insert all 5 DVD then restarts Recovery Manager), I get the error "No found bootable media" when the legacy support is disbled. On activation of legacy support, begins the phase of installation of driver, but after a while, my laptop is stuck in a reboot loop. I left it for half an hour but he kept just reboot.

  Guarantee of the laptop is long gone. New installation of Windows 7 has worked well, showing everything goes well with the material, but I want my Windows 8. Help.

  He resolved myself: had to convert the GPT MBR partitioning system.

  As this community seems inactive, I'll post like how to convert to GPT:

  NOTE: You will need any installation of Windows DVD for this. I used Windows 7 DVD.

  1. first activate the legacy from BIOS support. (Press F10 to enter the BIOS settings)

  2. Insert the Windows installation DVD, and then press F9 to change startup options. Boot from the CD/DVD drive.

  3. once the loads of installation, select the "Repair Windows" option, located at the lower left corner.

  4. find the command prompt and run these commands:

  DISKPART

  LIST DISK

  SELECT DISK 0

  CLEAN

  CONVERT A GPT

  OUTPUT

  5 reset. Disable the legacy from BIOS support. Now the recovery system will work without any problem.

• Try to install Windows 7 on the new hard drive - 500-298w Pavilion

  System hangs on the language selection screen after the loading of files and Windows startup screen. No keyboard or mouse input. Tried to move the keyboard usb on the front and back of the usb ports. Hard drive is recognized as a storage device in the BIOS

  Things I've tried in BIOS

  -in Storage Options: I tried IDE and AHCI

  -UEFI Boot Sources: disabled

  -Legacy Boot Sources - CD/DVD is installed on the first position

  Secure Boot cfg: leg Sup-> Enabled, secure startup-> disabled

  Tried with quick start-up tech and virtualization enabled and disabled

  I have to do something with key Mgmt?

  Should I start a self-test DP? 270 minutes... Ouch

  Anything in the options to be changed.

  .. .confused

  Still have the original with Windows 8.1

  Hello

  Do not forget to connect the keyboard and mouse USB 2 ports (not USB 3).

  If you are using a non-US keyboard and/or a version non-English version of Windows, then press the ESC key at startup to the top and then select the appropriate language.

• Windows XP operating system installation on the new hard drive

  My hard drive crashed on my Dimension 3000 desktop computer and I am trying to replace. I managed to install Windows XP Pro and all the drivers. My problem is that Windows application authentication code, when I enter what is on the side of the tower that sometimes invalid. It's prompting me to buy another license.

  Any ideas?

  bdives

  
  

• HP Pavilion dv6700t (CTO): install the new hard drive on HP Pavilion dv6700t

  
  

  Hi @mcast1286,

  Windows Update find updates of generic driver for your laptop, but not all drivers are compatible. Some people have lost some function during the upgrade to Windows 7 to 10 due to the problem of drivers. You can try to install Windows 7 on your laptop, but the performance is not assured.

• Re: Satellite C50D-A-11 q - how to get key WIn8 and use it on the new HARD drive?

  Hello

  hard drive died in my laptop. How do I get my key Windows 8 so I can install the new hard drive?

  Thanks in advance

  Stuart
  nessydoo

  Unable to get the key separated from Toshiba, but only the Toshiba recovery disc.

  If you have not created the Toshiba recovery disc in the past, then you will need to order this disc from here: http://backupmedia.toshiba.eu/landing.aspx

  The disc contains the image. Image is a package that contains the (already activated) Windows system and all Toshiba drivers and tools.

• Is it possible to use the Acer restore disks on a new hard drive?

  The hard drive on my Aspire 5251 appears to be dead. He was behaving erraticly and we tried a full restore via the program eRecovery a couple of times and it is always wrong (error 0x45d). We also tried discs that we did when the laptop is new with no luck.

  I bought and installed a new hard drive, but can't get the disks to install on it either. I'm guessing that it is looking for something partitioned the original hard drive because he says that something is missing. It is more under warranty and I can't figure out how to order the full install discs from Acer. Is it possible to get these recovery discs to work?

  Also, FWIW, I installed Ubuntu on the new hard drive just to see if it works, and it's so I know everything works at least.

  TIA

  Yes, you can use your Acer restore on a new hard drive disks. If you have installed ubuntu, you may need to format the HARD disk and to create a partition on the disk hard so that the discs work.

• How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  * Original title: windows 7 download

  I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  It has probably comes with Windows 7 Professional 64 bit.

  You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  You can also use Windows 10 too as you have the right to it as a free upgrade:

  • How to download official Windows 10 ISO files
  • How to: perform a clean installation of Windows 10
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• My hard drive crashed, I bought a new, and I have the restore disks but it error when you try to load on the new hard drive!

  It wont let me load Vista on the new hard drive

  Hard drive test:
  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• HP 6310y can't get the new hard drive to load windows 7

  model 6310y - Windows 7 Home premium 64-bit

  My desktop PC has stopped working.  I took it to the local computer store and they said it was the HD.  I bought the new hard drive and tried to install the retail of Windows 7 home premium 64-bit OS.  I got an error Code 0 x 80070002.

  I called HP support... told me that I needed their brand of recovery disks because the motherboard or BIOS would not allow me to install Windows 7 on new replacement HD disks without having their (HP).  So I ordered their... $17

  I bought another new HD and tried to install Windows 7 OS with HP recovery disks.  This time got the 0xe0ef000e error Code.

  I have to mention every time trying to install OS on new replacement HD... He got about 8 to 12 minute installation before receiving error messages.

  I called HP support... this time said that the retail version of Windows 7 OS must have worked and that I didn't need the HP recovery discs brand new replacement HD installation.   They offered me to pay $199 and send my office to fix inclusive it... all.

  Very confused.  I never had something like this before... I had several hard drives die over the years and have replaced the myself and installed all of the software including myself OS without any problem like this.

  Memory retrieves okay when using the diagnostic f9 key... She showed problems with HD during one of my many attempts of diagnostics

  Not sure if it's a bad mother or the video card integrated... do not know how to find either... since I can not the PC market

  It will start at Blue HP screen & most of the time allow me to enter in the screens f9, f10 or ESC.

  Don't know if its worth paying $200 to fix this or go and buy a new one for about the same price.

  any suggestion or help is appreciated

  Thank you

  I had to send it back to HP.  It is a bad motherboard.  They dropped the price a bit to replace the motherboard.  I don't remember how much they charged me.   I'm guessing around $200 - $300

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• need to upgrade 250 GB hard drive, how I transferred all my files and xps3 pro for the new hard drive without lsing all this?

  need to upgrade hdd 250 GB how I transferred all of the files and opperatting sys win xp sp3 new disk hard ad not lose any

  Hello

  You cannot transfer the operating system from one hard disk to another. But you can use the backup utility to backup data and restore it on the new hard drive.

  Reference:
  Install, reinstall, or uninstall Windows
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/308422
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/320820
  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
  http://support.Microsoft.com/kb/309340