Result of failure Dell 560 Advanced memory model

Similar Questions

• Dell PowerEdge T310 Memory Upgrade configuration

  Hi all

  Currently I have a T310 with 2 x 4 GB memory

  Information about the DIMM:

  (Hynix 4 GB PC3-12800 DDR3 - 1600 MHz ECC Registered CL11 240 - Pin DIMM memory rank double Module Mfr P/N HMT351R7CFR8C-PB)

  I intend to add with a total of 6x4Go = 24GB 4x4GB

  This new configuration of memory will be supported?

  Thanks for the reply

  See more info on the server below;

  Server has 1 CPU (Xeon x 3430 @ 2.40 Ghz)

  Memory information: Ok

  Attributes of the bars of memory

  Attributes; Memory Matrix 1
  Location; Motherboard or motherboard
  Use; System memory
  Power installed; 8192 MB
  Maximum capacity; 32768 MB
  Available slots; 6
  Locations used; 2
  The ECC type; Multibit ECC

  Total of bars of memory

  Attributes; Value
  Total installed capacity; 8192 MB
  Total available power to the BONE; 8192 MB
  Total maximum capacity; 32768 MB

  Table 1 of the memory details

  Status; Name of the connector; Type; Size
  OK; DIMM_A1; DDR3 - synchronous registered (buffered); 4096 MB
  OK; DIMM_A2; DDR3 - synchronous registered (buffered); 4096 MB
  Unknown; DIMM_A3; [Not busy];
  Unknown; DIMM_A4; [Not busy];
  Unknown; DIMM_A5; [Not busy];
  Unknown; DIMM_A6; [Not busy];

  Device memory information: Ok

  BRIEF on connector: DIMM_A1

  Attributes; Values
  Situation; OK
  Device name: DIMM_A1
  Size; 4096 MB
  Type; Synchronous DDR3 registered (buffer)
  Speed; 0.63 ns
  Failures; None

  Device memory information: Ok

  BRIEF on connector: DIMM_A2

  Attributes; Values
  Situation; OK
  Device name: DIMM_A2
  Size; 4096 MB
  Type; Synchronous DDR3 registered (buffer)
  Speed; 0.63 ns
  Failures; None

  Components (FRU) Information System

  Device; Serial number; REF.; Revision; Reference of the manufacturer; Date of manufacture
  System Planar (BMC); CN1374008602B7; 02P9X9; A00; DELL; Mon Aug 09 04:00 2010
  1 power supply (PS 1); CN1797208E0NQR; 0N884K; A00; DELL; Mon 16 Aug 10:25 2010
  DIMM_A1; 4B55A111; HMT351R7CFR8C-PB; S/O; Hynix Semiconductor (00AD04B380AD); Mon Apr 09 16:00 2012
  DIMM_A2; 4B15A14C; HMT351R7CFR8C-PB; S/O; Hynix Semiconductor (00AD04B380AD); Mon Apr 09 16:00 2012

  You can always memory of control similar to the one you already based on the part number. Also check the link below for memory other compatible Dell:

  http://Accessories.us.Dell.com/SNA/category.aspx?category_id=8136&c=us&l=en&s=BSD&CS=04&mfgpid=203788

• i, ve got an optiplex gx520 dell, it's this model able to copy or burn videos on my pc on a dvd disc.

  i, ve got an optiplex gx520 dell, it's this model able to copy or burn videos on my pc on a dvd disc.

  If a DVD burner, it can. Look at your CD/DVD drive on the computer - it can burn DVDs if it says:

  "DVD + R/RW"
  "DVD + R/RW"
  'DVD + R'
  'DVD-R '.
  "DVDR.
  or "DVD writer".

  He can't if it says "DVD-ROM" or "CD".

  If you need a burning program here are those that are free:

  ImgBurn
  http://www.ImgBurn.com/

  StarBurn
  http://www.RocketDivision.com/starburn.html

  Infra Recorder
  http://InfraRecorder.org/

• Dell Precision 690 memory risers

  Original title: Dell PRECISION 690 MEMORY RISERS

  Help...
  Ive a precision 690 workstation, WITH 4 GB = (2 X 2 GB) WITH MEMORY installed now and Ive mounted a 1kw power.

  I JUST GOT A PR OF MATCHING RISERS (EG) 1,2 & 3.4...

  BUT THAT IS WHERE THE PROBLEM BEGINS.

  THE DISPLAY SHOWS THE RISERS MUST BE INSTALLED IN SETS OF FOR.

  AS SOON AS I INSTALL MORE MEMORY MAKES THE FAN BACK SOUNDS LIKE HIS WILL EVEN TAKE OFF BY PUTTING IN THE GAME OF MEMORY (4 GB), I GOT IN WITHOUT THE RISER INSTALLED FANS TO ACCELERATE.
  SOMEONE POINT ME IN THE RIGHT DIRECTION BECAUSE IM CERTAINLY SOMETHING WRONG.

  The page linked below can be useful, since it covers the installation of memory with the memory riser cards:

  Dell Precision Workstation 690 user's Guide
  Installation of memory (with maps of memory riser option)
   http://support.Dell.com/support/eDOCS/systems/ws690/en/UG/memory.htm#wp1063555

  If this is not enough, so I suggest the following tips to Shenan Stanley and contact Dell technical support.

  Kind regards

• Dell inspiron 15R Memory Upgrade N5110

  Hello

  I have a dell inspiron N5110, and I plan on upgrading the RAM modules, which are estimated at 1333hz. I would like to know if the motherboard can support modules of RAM at higher frequencies, if so, how much of a gain of performance can I expect.

  Any help will be greatly appreciated.

  Thanks in advance.

  Fastest modules may work but will not increase the speed - 1333 MHz is the speed of memory limit in this model.

• XY graphics memory model

  I found a need for a XY chart in one of my apps, and I'm trying to wrap my head around how to use it properly. My implementation looks like this:

  

  That is closely modeled after one found here: http://digital.ni.com/public.nsf/allkb/18B56D8556D44BF18625753D006EFF7C

  My application uses a state machine, including initialization and closing says. If I do this nonreentrant VI, I can't use many times for my multiple charts XY (2). However, if it's on the way home, I don't see how I'll be able to clear the graph in the State of closure, as the instance that I want to erase is in the graphics state.

  The current implementation loads all data from a spreadsheet into memory, it is plotted on a XY Chart and then destroyed the data, that's why I think it's the perfect application for a XY Chart.

  I can't use a waveform graph, as my data are not evenly spaced in time.

  I ended up using a value that is defined in the init State to clear the chart (really to add to what has been at this point in the curve). I also have the VI of chart XY for reentrancy Clone allotted in advance, which means that each block on the block diagram gets its own space of memory, as expected.

  The difference is night and day. A performance full of the app (it's a simulator) used to take about ~ 6 minutes, now it takes less than 30 seconds. It's amazing!

• Dell Optiplex 780 memory update does not

  1. I have purchase Dell Optiplex 780 supplied with memory DDR3 8 GB (4x2Go). I wanted to update so I bought 4 GB RAM (4x1Go) and tried to install it today. The diagnostic lights Dell on 3 and 4, which means that the memory is detected, but at fault. Now, I doubt that this new module of memory are defective. Here's what I did to solve problems:

     I took the original strips and installed a new. There are 4 DIMM and I tried to put it in all the 4 connectors DIMM one, but my PC will not start and shows the Dell diagnostic lights lit 3 and 4. then I put my original RAMS but still the same problem has happened that I also tried the two Rams Original one by one in all the slots but same question :(

     I also tried without installed memory but still Dell lights lit diagnostic 3 and 4 and no beep heard.

     Can someone help me what is the problem real?

  Hi Danish_smartpk,

  Welcome to the Dell Community Forum.

  If the 3 and 4 diagnostic lights are lit, it is code modules of memory detected, but a memory failure that occurred. You also mentioned that there is not only no beeps no heard when no memory is installed. When no memory is detected by the system, it emits beep codes indicating the same.  If the motherboard is not beep when no memory is installed, it could indicate failure systemboard.

  It is generally recommended that the BIOS updated before the new memory being installed. In addition, your computer supports a maximum of 8 GB of RAM DDR3 SDRAM (memory non - ECC only). If it already came with 8 GB of memory, it would not take an additional upgrade.

  If the system is under warranty, contact me with a message private by clicking on my name highlighted in blue. On the next page, click on the envelope icon and provide your service and coordinates (as mentioned below) so that I can access your system folders.

  • System Service Tag No.:
  • Name of the registered owner system:
  • Shipping address:
  • Number of phone/s:
  • E-mail address:

  However, if the system is out of warranty, you can contact a local technician for assistance to the replacement of the motherboard or contact our warranty Support has expired on the link below:

  http://Dell.to/12LmNBq

  Please do not hesitate to contact us in case of other queries.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit ourSupport Site .

• CPU fan failure: Dell inspects the expedient to the customer before computers the they?

  After waiting 11 days which includes I believe a week in the production of my Tower, 17/11/2015 I finally received my new Inspiron Desktop Edition Gamer (Intel). I turned on the computer and guess what I saw on the screen "CPU Fan Failure".  So now, I have to return the tower to a Dell for a tech to fix the problem with the fan.

  Here's my question. Fact or not Dell inspect their product before they will deliver to their customers? Well, Dell has not delivered the product if a "CPU Fan Failure" had existed before shipment.

  Unfortunately things can occur in vessels too...

  Before send back you, open the case and check if the cable is correctly connected to the motherboard. The cable may have jumped out of the motherboard.

  Just unplug it and plug it back to the motherboard. If it's totally off the Board, you can go to the Support page for this exact model and look for the link at the top of this page for the manual. Most service manuals show a diagram of components/connectors on motherboard and CPU fan connector must be checked.

  If everything's fine, which solves the problem, so you won't have to send again.

• Dell PowerEdge T610 (memory upgrade)

  I bought Dell 16 GB certified replacement Memory Module for select Dell - 2Rx4 1333 MHz RDIMMS LV systems

  Currently, I have 8 GB of RAM (1 GB on every slot machines). After I installed this new memory and restart the server, it shows invalid memory configuration. So, I changed the memory setting in BIOS 'Advanced ECC' to 'optimize memory '. But it detects more than my current speed of the memory is 8 GB. Is there something wrong with the configuration of the memory? I tried to re - establish the new RAM.

  Help, please. Thank you.

  Hello.

  Your memory configuration is not valid because the channel memory CH0, is not balanced with channels CH1 & CH2. Refer to the schematic illustration below:

  

  In order to balance the memory on these channels, we should have memory DIMM in:

  A1, A2 & A3 = B1, B2 & B3 in addition also A4, A5 & A6 is B4, B5 & B6. That's why CH0, CH1 & CH2 memory modules must be identical for the performance and optimal memory configuration. Depending on the upgrade amount of memory you are looking for, you can buy 1 more 16 GB DIMMS and then fill in slots A1 B1 & offer a total capacity of 32 GB. This will provide more flexibility for future memory upgrade

  Let me know if you have any other questions.

• Last Windows 7 Dell Laptop product which model?

  I want to buy the last Windows 7 laptop produced by Dell.  Is it the Inspirion or what model and number etc. should I seek to buy?  I don't want Windows 8.  I buy for my elderly mother and don't have much on this subject, all mail and the internet.  It has no wifi.

  You can always get the class business Latitude E-series such as E5440 and E6440 with Windows 7.

• Although it is the dell DELL SAS business class model, can I buy a 600 GB 15.7 k sas 3.5 Cheetah? I could put any 15.7 k sas model in a dell and it is not compatible.

  can I buy a 600 GB 15.7 k sas 3.5 Cheetah without having the business class dell model?  I could put any 15.7 k sas model in a dell and it is not compatible.

  any help would be greatly appreciated as im new too servers.

  You can, and it can work properly.  All certified disk includes the risk of bad contact with the controller.  So, the answer is 'yes', but at your own risk.  Dell will also help you solve the problems of storage without certified readers, so if you go credits/retail, get ready to make your own troubleshooting - or be able to make experts if necessary.

  You may NOT USE the SME players on the controllers of the company although.

• REFERENCE DELL T710 POPOLAMENTO MEMORIA [CF]

  Salve a tutti,

  He 25 abbiamo labor-intensive basandoci knew quanto tramite supporto online here by it service tag del nostro Server

  Modulo di memoria sostitutivo certificato Dell 8 GB by some sistemi Dell - 2Rx8 RDIMMS a 1600 MHz
  LV - ECC

  Banchi 2 da utilizzare su UN T710 server.

  Currently questo e con misconfigured 12X2Go UDIMM che andrebbero rimosse completely down spazio rates due banchi nuovi (in A1 and B1 being Jack double both the cpu presenti con)

  Dal manuale pero non capisce se siano sufficienti, trovo infatti information discordanti: con RDIMMS pare che he taglio minimo sia 32 (con banchi da 8 A1, A2 B1 B2, con banchi quindi da 16 A1 B1)

  

  Prima di has the price due alttri di modules quindi mi'd proven confirmation che he server effettui it boot sia con configurazione a 16GB (2 x 8 A1 B1) sia con 32GB (4 x 8 A1 B1 A2 B2)

  Grazie a tutti per ed attenzione he supporto.

  Buogiorno, a pag 100 del manuale (pag 101 nel suo caso), trova possibili configurazioni di available by RDIMMS single Dual CPU e memoria:

  downloads.Dell.com/.../PowerEdge-t710_owner%27s%20manual_en-US.pdf

  Può usare tranquillamente due banchi da 8 GB, uno per ogni socket. A1 + B1

  Francesco

• Too many items to menu in the application will result in failure project packaging

  Hi all

  I have a problem in my application when the number of the menu in the application items exceeded a certain number of the packaging project fails.

  When I tried to the bottling of the project in eclipse, an error message was the result:

  I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified
  Packaging project Myproject failed (taken 6,391 seconds)

  But when I remove one menu item package succeeded.

  What could be wrong.

  Thanks in advance.

  Thank God,

  I found the solution:

  I'm not sure but I think becaue I use (Blackberry JRE 5) so I need JDK 6 more to update 20.

  But what makes issue resolved that:

  I installed (JDK 6 update 21) and put the path to the bin folder in environment variables.

  Here is the link to download (JDK 6 update 21):

  http://download.Java.NET/jdk6/6u21/promoted/b05/binaries/JDK-6u21-EA-bin-b05-Windows-i586-29_may_201...

  To add the environment variable:

  Right click on my computer > properties > advanced > environment variables:

  system variables:

  Double click PATH, and then add the path to the bin folder (can be like this: "C:\Program Files\Java\jdk1.6.0_21\bin")

  I hope this will help one.

• Dell PowerEdge R510 memory Conmfiguration

  Greetings,

  I have a Dell PowerEdge R510 with a SINGLE processor that currently has 16 GB of slots of RAM installed A1 - A4 are all filled with 4 GB memory modules. My questions are the following:

  1. Am I able to, another 8 GB or memory?
  2. Is only to have a CPU a problems with filling more memory?

  Think I found my answer here:

  en.Community.Dell.com/.../19645918

• Result HBA failure

  Hi Chaps,

  I have:

  -A cluster of esxi consisting of servers blade HP

  -Each blade has a single dual-port HBA

  -A single port goes to SAN 1 and the other goes to SAN 2

  If a port on the single HBA fails... no problem

  However, what is the result of exected real HBA failure? I have trouble understanding how ESXi would handle it...

  Can I test this in vCenter? is it possible for me to be able to unplug the HBA of the host in vCenter?

  Thank you

  Dryv

  Ah yes, I got!

  Disable the paths of this host should produce the same result as the host will not be able to connect to data warehouses, this post has a clean (although dangerously powerful) script that can help.

  You do not need to configure anything other than standard HA, everything is built in.

  Good luck!