Result of permit topping disappears

Similar Questions

• Search results appear using Siri disappear immediately

  If I ask Siri to do something, I see the result on my phone, but it immediately disappears and I went back to the home screen. For example, if I ask Siri to ' find the closest Starbucks, she'll say 'good, check it out' show a map, but the map disappears in less than a second or two and I went back to the home screen.» Which means I have to ask again and then immediately on the result before it's gone. This makes the use of Siri useless and dangerous when I drive. Does anyone else have this problem? Does anyone know how to fix this? I'm 9.2.1 on an iPhone IOS 6.

  Looks like it can be to break on you.  Try to restart the phone.  Which usually fixes crash problems.

• Google search results on Mac OSX - disappeared when returning to page

  Yosemite running on a MacBook Air. When I search with Google (my default), the results appear normally. However, once I click on an ad, go ahead and then return the results of the search, the search results page is empty. Refreshing works OK, but why would this happen? It is these - last month - but also consistent and what happens with Firefox (vs Chrome or Safari).

  Does anyone else have this problem?

  Maybe you have increased your zoom level on the results page recently? I suspect that because there is an old problem with going back to the search results page and blank might as well have it, and it seems to occur only when you use a zoom level high on Google with 'instant prediction results' (the default setting). When to return to this page, Firefox glitches when you restore the cache in memory page, in fact, you can see the results for a fraction of a second before it empty out.

  Assuming you like your zoom level and enjoy using the instant prediction results, then the solution is to disable the part of the Firefox cached in memory by changing a setting under the covers.

  (1) in a new tab, type or paste Subject: config in the address bar and press return / enter. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste sess and make a pause so that the list is filtered

  (3) double-click the preference browser.sessionhistory.max_total_viewers and change the value from-1 to 0 (that's a zero).

  (Please change not all other parameters similar to 0-sounding or you can disable the ability of Firefox to save/restore your tabs and windows open).

  Then reload the page of Google results and the test. Who will fix this for you?

• My bar of the task/navigation/toolbar (top) disappeared when I installed Google Chrome. I have Windows 7. How to restore it pls Thx

  I downloaded Google Chrome and when I try to use it there is no toolbar or a bar at the top of the screen. I tried to understand it on my own, but am unable to do so. If I use Google or Internet Explorer it works fine, but if I try to use the chrome server is not there.  Please notify.  Thank you.

  Google Chrome has no toolbars, menu bars, or title bars.  That's how it was designed.  If you have questions about Google products, you should contact Google.

  Here is what Google Chrome is supposed to look like (no title, no menu, no toolbar):
  

• Activation of optical Correction results in Image to disappear

  Working in camera raw PSCC I click the lens correction tab & when I click on the check box turn on Lens Correction my photo is replaced by the attached screenshot.  What is going on?

  Hi charlesj,

  Please go into Photoshop preferences > file management > Camera Raw preferences > uncheck "use the graphics processor.

  Then restart Photoshop and check again.

• The Google web search results 'not fair' in Firefox

  I'm having a problem using Google search on the web (toolbar and directly from google.com) in Firefox. When I search a keyword, lets say a company name and you wait to make appear the company Web site, the results include videos, articles, news, etc. None of the main company Web site are included in search results. There is no problem with Google web search in IE or Chrome.

  Here's a specific example: "Mozilla Firefox" in Google search you use Firefox there are some 31,600,000 results with the top 10 being random sites on Firefox browsers. When I search "Mozilla Firefox" in Google using IE, there are only some 130,000,000 (4 times more), with the best results being www.mozilla.org/and other Mozilla sites 'main '.

  I ran all the patches malware/Antivirus software recommended, reinstalled Firefox, update of a few add-ons/plug-ins I have, and made sure that Google search parameters are exactly the same for all browsers. Nothing works.

  Did anyone else encounter this problem or have a guess at what may be the cause of this? I have spent a few hours trying to fix it and am willing to give up Firefox, so far that is (was) my go to the browser.

  Hello, google is tracking and customization of your search history even when you are not logged in - maybe you will have to remove or erase all cookies from Google.com and see if the results change...

  http://support.Google.com/accounts/bi.../answer.py?hl=en & Answer = 54048

  Delete cookies to remove the information from Web sites is stored on your computer

• I want to erase the search results for certain searches. When I search for some keywords I get old SERPs that I know are not up-to-date. If I use a different machine, I get the current results. I can't find how to clear it.

  I am tracking my own Web site position in search rankings. For a short period, he appeared on page 1 for certain keywords. It is now on page 2 or 3, (as seen by me and other users when you use another computer or a browser), but when I search on my computer I see the old pages of results showing the top of page 1. How can I erase these old pages of results?

  If you press Ctrl and F5 at the same time, that changes? I think that Google (I guess that's what you're referring to the) changes in search results is inspired by a little if you are connected and preferences, etc.. Try to connect on google if you are connected.

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• log in - help sql: error ORA-01489: string concatena result

  Here's a sql query and I am cooking a decoding, but since there are several columns invloved when I try to run it I get the following error:
  ORA-01489: result of concatenating string is too long
  
  Any kind of help is appreciated, I need to get it going or I'm dead :(
  
  Concerning
  Rahul
  
  
  
  SQL:
  Select sys_connect_by_path(c.decode_prep,'-') decode_prep
  from (select "DECODE (BIAPPS_11.'|)") substr (b.all_cols, InStr(b.all_cols,',',1,a.RN) + 1, InStr(b.all_cols,',',1,a.RN+1)-InStr(b.all_cols,',',1,a.RN)-1). «, » ||' RAHULKALRA.' | substr (b.all_cols, InStr(b.all_cols,',',1,a.RN) + 1, InStr(b.all_cols,',',1,a.RN+1)-InStr(b.all_cols,',',1,a.RN)-1) |', "1", "0")' decode_prep, rownum curr, prev rownum-1
  from (select rownum rn
  Double connect rownum < =.
  (select (length('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM ,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT ,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM')
  - length(replace('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM ,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT ,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM',',')))+1 total_cols
  the double)), (select ',' |') ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM,CSCN_HIER1_CODE ,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT SRC_EFF_FROM_DT , SRC_EFF_TO_DT, EFFECTIVE_FROM_DT, EFFECTIVE_TO_DT, DELETE_FLG, CURRENT_FLG, W_INSERT_DT, W_UPDATE_DT, DATASOURCE_NUM_ID, ETL_PROC_WID, INTEGRATION_ID, SET_ID, TENANT_ID, X_CUSTOM' | (',' double all_cols) b) c
  Start by curr = 1
  Connect prior curr = prev
  length (sys_connect_by_path(c.decode_prep,'-')) desc order
  
  ---------------------------------------------------------------------------------------------
  
  same as above sql only the difference is here I'm pulling the first record in the result set that top query returns:
  
  Select ltrim (replace(decode_prep,'-','||'),'| ') decode_prep
  of (sys_connect_by_path(c.decode_prep,'-') select decode_prep)
  from (select "DECODE (BIAPPS_11.'|)") substr (b.all_cols, InStr(b.all_cols,',',1,a.RN) + 1, InStr(b.all_cols,',',1,a.RN+1)-InStr(b.all_cols,',',1,a.RN)-1). «, » ||' RAHULKALRA.' | substr (b.all_cols, InStr(b.all_cols,',',1,a.RN) + 1, InStr(b.all_cols,',',1,a.RN+1)-InStr(b.all_cols,',',1,a.RN)-1) |', "1", "0")' decode_prep, rownum curr, prev rownum-1
  from (select rownum rn
  Double connect rownum < =.
  (select (length('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM ,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT ,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM')
  - length(replace('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM ,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT ,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM',',')))+1 total_cols
  the double)), (select ',' |') ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM,CSCN_HIER1_CODE ,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT SRC_EFF_FROM_DT , SRC_EFF_TO_DT, EFFECTIVE_FROM_DT, EFFECTIVE_TO_DT, DELETE_FLG, CURRENT_FLG, W_INSERT_DT, W_UPDATE_DT, DATASOURCE_NUM_ID, ETL_PROC_WID, INTEGRATION_ID, SET_ID, TENANT_ID, X_CUSTOM' | (',' double all_cols) b) c
  Start by curr = 1
  Connect prior curr = prev
  length (sys_connect_by_path(c.decode_prep,'-')) desc order)
  where rownum = 1
  
  Published by: Mac_Freak_Rahul on November 28, 2012 01:31: in the first sql ')'
  removed after desc in the last line so now this query begin and will throw an error.

  Mac_Freak_Rahul wrote:
  @Blushadow:

  (1) first of all, I'm sorry for not posting my question according to the rules of the forum, next time I'll take care of that.
  (2) Secondly, thanks for the solution, I have no exp with clob, but I can take a deeper look later.
  (3) I just want to know if there are any other wayout, you mean the second concatenation of 4000 bytes sys_connect_by_path exhausts it might return this error?

  SYS_CONNECT_BY_PATH returns a VARCHAR2 data type. In SQL VARCHAR2 data type is limited to 4000 bytes, then Yes, you will get an error if the data that you generate is greater than 4000 bytes (and I say bytes rather than characters, because if your database uses a multibyte multi character set could be as little as 1000 characters)

  I'm right now stable for a table who got 62 columns... I have tables that have 200 close passes: (, great, if you can throw some light on this, if your the best way and the only one to achieve?)

  If you really need to concatenate strings together which exceeds 4000 bytes, then Yes you must use CLOB to store data. Oracle does not provide a native way to aggregate together in a CLOB datatype string, so why you need to write your own function.

  PS: just a quick overview of my value, it will be by comparing schema1.table (s) with shema2.table (s) where table_name must be the same...

  So why are you information concatenation together to achieve this goal?

• Disappearance of the images in the latest version

  Hello
  
  I joined the Gumbo new generation 4.0.0.4904 (with TLF build 357), but it seems to be the problem with the images. Problem is the disappearance of the image. After adding image, type some text and then click the mouse near the image, results sometimes in the disappearance of the image and continue typing, images get appeared again. Can check you?
  
  Kind regards
  Ahmed

  I think he should fix it soon, but not in the Gumbo that just went upward. Should be part of the next Gumbo which takes up a new TLF.

• Best results of 10 based on the date

  Hello
  
  I tried to find a way to get 10 rows of data based on the latest release dates, which is sort by newest in descending order. Here is the table and SQL that I use. By the way, I am using Oracle 10 g.
  
  

  SQL = SELECT movie.id, movie.name, movie.date_released,actor.actor_name, movie_type.type FROM movie INNER JOIN actor on movie.id = actor.movie_id INNER JOIN movie.id = movie_type.movie_id where date_released > '10-OCT-2008' and rownum <=10 order by date_release desc;

  I used date_released in where clause for a little record to return because I have a lot of documents that leave from 2001.Tell me if my approach is wrong.
  
  
  
  
  But I don't get the expected result. The result I get are not as expected. For example, it displays only from 20/04/2010 in descending order. What can I do it wrong? Your help will be greatly appreciated. Thank you.
  
  Edited by: Software_Janitor may 27, 2010 05:31

  ROWNUM is assigned before the ORDER BY clause, which means that you cannot restrict your results by using ROWNUM in the same query in the ORDER BY. You must place the request with the ORDER BY in a subquery and filter results at the top of the page in the outer query like this:

  SELECT *
  FROM
  (
          SELECT 
          FROM   
          WHERE  
          ORDER BY 
  )
  WHERE rownum <= ;
  

  I tried to convert your example:

  SELECT *
  FROM
  (
    SELECT movie.id
         , movie.name
         , movie.date_released
         , actor.actor_name
         , movie_type.type
    FROM       movie
    INNER JOIN actor      ON movie.id = actor.movie_id
    INNER JOIN movie_type ON movie.id = movie_type.movie_id
    WHERE date_released > TO_DATE('10-OCT-2008','DD-MON-YYYY')
    ORDER BY date_release DESC
  )
  WHERE ROWNUM <= :some_val
  ;
  

  It's called a "Top - N" query Here is an article showing other alternatives: on Top-n and Pagination queries

  I hope this helps!

  Edited by: Centinul may 27, 2010 08:26

• Top N for each grouping?

  Is there a way to show results for each group of OBIEE in N?
  
  I want to display the amounts of 10 albums for each region at my table. If you are using a Top N filter, it returns the results of set Top N I tried to create a pivot table dynamic and using of 'Région' as the delimiter section, but he got the same results. It is only 10 total quantities, and I want to see 10 amounts for each region.
  
  Kevin

  Yep,

  Use the statement:
  TOPN ('F1 income'. "" Recipes 1-01 (after all) ", 10"market D2. ("" M01 Market ")

  concerning
  John
  http://obiee101.blogspot.com/

• Remove media player 11 for windows xp and re - install

  Please help me: I need to remove media player 11 my Windows XP and reinstall it.

  Reason no. 1: some of my music simply disappear from my library and some of them are still there, but when I click on a song I get one!, when I try to remove this song or the entire file also I can't remove it. If I do a search have the file I can't find.

  Reason 2: When I copy a CD on my computer I get the same coverage on several Albums. As for excample: if I copy a CD of Afrikaans I get cover for Bon Jovi so Bon Jovi cover apply to other albums as well and it's not same Jovi songs.

  Now I want to remove my media player and re-install to see if the acure always problem and if yes I need to load an old versions like: Media player 10 if it is still possible.

  I will appreciate if you can help me. Thank you

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  first of all, we must see if your system is clean, after return with results at the top, you can remove programs later if you wish.

  brand and model of browser, OS, pc and ServicePack, current antivirus?

  Did you do to add/remove in Control Panel and uninstalled WMP?

• How can I disable the auto hide feature

  I've updated Firefox, and now all the "stuff menu" at the top disappears.
  I actually prefer to see what are the open tabs, etc.
  How can I disable this?

  You are using the full screen? You can toggle the Mode full screen by pressing F11, see more How to make Firefox and Web sites go full screen.

  Or you try to configure your toolbars? You can customize it, see what happened to the file, edit and view menus?

• 10.11.5 update won't let closed MacBook

  Update for 10.11.5 yesterday and my MacBook doesn't stop except if the switch is held down--with one exception:

  1. normal shutdown is select stop in the dark apple, or hold the power to control and hold alt key power for a few seconds. The result is the office disappears, and the finder menu bar, but the machine is not complete. In fact, all services are always available from the dock or dashboard, but otherwise, the entire screen is empty.

  2. He will stop 'normally' in the log on screen, as I've not connected first, after which he repeats the above.

  3. I did first aid, LANDAU and SMC once and used kextutility.

  4. any views or advice gratefully received. In the meantime, I use Time Machine to return to v.4. I can't help but think that forcing the machine to cut can be a bad idea.

  The software for a Wacom tablet is known to prevent the shutdown of OS X 10.11.5. If this software is installed and that you no longer use the device, please remove the software according to the manufacturer's instructions. Otherwise, check with the manufacturer for support or an update. Back up all data before making any changes.