Resync after the new hard drive and battery failure - SOLVED

Similar Questions

• No Internet after the new hard drive and Windows 7 Clean reinstall

  I have a Dell Studio XPS 9100 I bought in 2011.

  The Seagate Barracuda SATA 1 TB hard drive died, and I replaced it with a Seagate Barracuda 2 TB drive. The re - install Windows 7 went ok, but I couldn't connect to the net.

  A ran the device driver and got errors on the network card and the RAID.

  I went on the site of Dell for the 9100 and installed the drivers for the adapter and the RAID.

  No luck. I always get the error "no card" as well as the error 'no cable not connected.

  I read a lot of posts about this problem and am stuck.

  Someone has an idea how I can fix this once and for all and go on the internet?

  I advise to patch Windows 7 with the WSUS Offline Update:

  http://dellwindowsreinstallationguide.com/WSUS-offline-update/

  Dell System Software:

  http://ftp.Dell.com/FOLDER88677M/8/Dell_System-Software_A03_R282538.exe

  Intel Chipset Device Software:

  https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-

  NEC USB 3.0 host driver:

  http://downloads.Dell.com/comm/R266197.exe

  Card reader:

  http://downloads.Dell.com/Input/R266195.exe

  Intel Matrix Storage Manager:

  http://downloads.Dell.com/SATA/Intel_Matrix-Storage-Manager_A01_R230056.exe

  Realtek NIC:

  http://downloads.Dell.com/Network/R266204.exe

  Atheros Wireless Card:

  http://downloads.Dell.com/FOLDER02988710M/1/Network_Driver_9T8XY_WN32_10.0.0.309_A03.exe

  Note make sure that all the drivers for Dell extract and install and extract not only. If they extract only you will need to manually launch the setup.exe in the extracted folder.

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• Hard drive crashed with CS5 on it. Has not been disabled before the collision. Desktopcomputer again loaded on the new hard drive and bu news updates do not work on the new computer.

  Hi, I hope I'm in the right forum! I have a laptop Aspire with Photoshop CS5 extended. The computer's hard drive crashed and so I had to get another hard drive! Obviously as the hard drive crashed, I was unable to disable CS5 extended before the crash. I have it charging on the new hard drive and in the meantime bought a desktop computer in which I loaded CS5. Updates have been working fine on the laptop. I tried to update the program on the new computer, but continue to receive error messages. I have read in any problems and think maybe computer laptop harddrive that crashed had CS5 yet on it, as I was unable to turn it off because I didn't know he was going to crash. I am only able to load CS5 on 2 computers and if it is still on the destroyed hard drive so I'm not able to turn it off and so I presume that is why I can not download the updates on my new computer. I hope someone can help me. I want to keep CS5 on both computers. Thanks in advance bunch Kara

  If you see excessive activation anomaly of counting, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and request an account reset activation.

  If you receive a different error, what exactly is this error?

• HP EliteBook 8440p: Best boot option after installing the new hard drive and put to memory.

  I just installed the new hard drive for my laptop and will get the cards of two memory installed tomorrow. I would like advice on what would be the best option to start when the laptop for the first time I'm on fire.

  I have the original Windows HP recovery disk came with the computer.

  I also have a recovery disc and a system image on disks created with Macrium Reflect two days ago.

  I also have a recovery disc and a system image is created on an external hard drive Seagate two days ago. (I've read mixed reviews on these is currently working as a media of rescue with Win7 Pro).

  I guess if I use the HP recovery disc I would be then just use any system image I prefer, without the recovery disk. Anyone know if it makes a difference at all which method to use?

  bozzle73

  My recommendation would be to restore using the image of MR (Macrium Reflect) you did.

  But then, I used Mr. on all my PCs for years and am a big fan - having had it Miss ever in the years and years of use.

  You will need boot from the boot of MR media (you did that right) and, if you photographed all the required partitions for the operating system, restore it on the new drive should take a few minutes, and when this is done, you reboot and everything should be OK.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Installed the new hard drive and now can't activate Widnows 7 as it says not valid for clean installation

  This computer is having problems and we tried to upgrade to Windows 7 hard drive crashed.  We installed the new hard drive.  Now, we try to activate this copy but code comes up saying invalid for a clean install.  We need to have some new code or just get ours to work.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Portege 3500: OS crashes after the new HARD drive update

  I have a problem with the new hard drive - Seagate Momentus 100 GB 7200 rpm, ATA - and...
  instalator blue screen starts normally (from recovery CD or OEM CD) and when partitioning is startis - system is stopped...

  HARD drive is ok - tested on another laptop
  Laptop is ok? instalator and works windows, tested on 2 HDD (40 and 60 GB, two IBM)

  It is possible, that this new hard drive is not compatybille with this laptop?

  Please help, because it's my boss laptop :(

  P.S. - sorry for peut English

  Hello

  Are you sure that the HARD drive is recognized correctly in the BIOS?
  Seems that the laptop does not support the new drive (100 GB, 7200 RPM).

  Perhaps because of the large size of HARD drive and the fast rotation value.
  I would try to use a 60GB 5400 RPM a 80 GB HARD drive maybe works but it seems that the 100 GB HARD drive is not compatible

• HP G71: Install the new hard drive and the raw copy

  Hello

  My HP G71 is 64-bit, 4 GB RAM and hard drive WD320BEVT. The laptop has more than 5 years of service and I want to replace with a new hard drive while performing a raw copy of the current. I have a dual boot Win 7/Ubuntu installation I want to keep on the new hard drive.

  As I have not found a new HD of the same type and capacity, I would like to replace the current one with an another Western Digital 2.5 ", the IDE interface, but with a capacity of 0.5 to 1 TB (I choose one or the other).

  My questions:

  -can I install one of these hard drives on this laptop? They are compatible with the current BIOS/chipset?

  -If I make a raw copy of the 320 GB drive to the 0.5 or 1 TB, how would the current operating system partitions will be reflected in a higher capacity drive?

  -J' bought an IDE/USB interface adapter as well as to make possible the raw copy, could you recommend, if these questions have the THUMB, a good free to use software that I could use?

  Thanks for your help!

  Yes I use Kubuntu and tried several times to just the entire disk image and it does not reproduce partitions Linux and Grub, but when you try to start Linux it will hang and say can not find the prior specific hard drive. So now I just make a backup of Windows and reinstall Kubuntu from scratch. Much easier. I think there are also Linux backup programs you can use, but never really saw the need.

• Re-installing Linksys Connect on mobile after the new hard drive installed

  I have a router E4200 and had loaded on my laptop Connect. My hard drive crashed and needs replacement. I have had no problem signing on my WiFi once I got the new installed hard drive.

  With the new hard drive, I now do not have Linksys Connect installed on my laptop. My question is: can I re - install connection with the router works perfectly good or re-setup Connect with the router already up and running will cause me problems?

  Thanks for any help.

  Here is an article on the configuration of the software once the router has already been put in place.

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&app=VW&VW=1&login=1&JSON=1&docid=90fabd0b3674497489d42...

• After installing the new hard drive and using recovery discs, I get this message could not start because the following file is m issing or damaged system32\drivers\pci.sys

  I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:
  Windows cannot start because missing or corrupt the system 32\drivers\pci.sys
  Then he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
  Select 'R' in the first screen to start repair.
  one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank you
  also, I can still use the old drive hard when it is installed on my laptop!
  HP pavilion dv5220us running windows xp
  I had advanced care system that had a top registry Fixer and I got ccleaner as well on the computer
  internet security Norton 2011

  Hello panjok2,

  Sometimes recovery CD are dependent on the architecture of a hard drive.  If it is different from the original disc, then we have problems.

  In this case, the best thing you could do is contact HP and see if this is the case.  If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• This copy of windows is not genuine after the replacement hard drive and recovery system

  I was running factory installed windows 7 Home premium in my laptop hp pavilion dv6 6119tx. Due to hard drive crash I replaced with new HARD drive.  Previously, I did system image backup using easeus todo backup and recovery softeware. After system recovery with the same software, this massage flasehes "this copy of windows is not genuine". I tried to enter the key of product at the back of the laptop but it says invalid.
  I ran diagnstic windows validation tool. him as a result is below.

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Code of Validation caching: 0xc004c4ab
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {CA180260-1211-48DB-834C-4805A4594053} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.111118 - 2330
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CA180260-1211-48DB-834C-4805A4594053}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1883088055-1570218021-1659234768Hewlett-PackardHP Pavilion dv6 Notebook PCHewlett-PackardF.1B20111005000000.000000 + 0002BFD3F07018400FE40090409India Standard Time(GMT+05:30)03DELL QA09 100100Microsoft Office Enterprise 2007126DF6616C522F5867l28mQpHyGN4/v7tLnJzLV + ZnKQ = 89388-707-5082974-6591914

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-16393-7601.0000-0552012
  Installation ID: 010735456091822376148725581093255175938323439855115461
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 1
  Trust time: 10/07/2012 10:49:07

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4AB
  Beyond: PASS
  Event timestamp: 10:7:2012 10:46
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: OAAAAAEAAQABAAIAAAAGAAAAAgABAAEA6GGaTIaqGKMieFCbUkhwn9QjphiojRKp0gzcQQzDLnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HP APIC INSYDE
  HPQOEM FACP SLIC-MPC
  HPET HP INSYDE
  START HP INSYDE
  MCFG HP INSYDE
  ASF!            HP INSYDE
  QA09 DELL SLIC
  SSDT HP INSYDE
  ASPT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE

  Help, please

  Code of Validation caching: 0xc004c4ab

  
  
  Windows has detected the presence of a feat of activation as evidenced by the presence of a table of slic of Dell on a HP computer.
  You need to install windows genuine.

• After the new HARD drive does not start installation Qosmio G15

  I just got this G15 last week and one of the hard drives was bad. Put it in a new Bay 2 and it does not start. I took it back and it starts fine. I even changed the main hard drive Bay 2 HD and it starts up fine with a hard drive. It's something to do with the scores, I think. Any help appreciated.

  Hello
  I think that the boot order has been the bad HARD drive in the BIOS.
  At the new disk you do not installed any OS, and in my opinion, this is a reason for starting problems.
  Simply access the BIOS and change the boot order

• Problems of new messages after the new hard drive installed.

  Just had to have a new hard drive, motherboard, and installed video card. Used to be I could click the "e-mail" on my desk and my new email would open automatically when the Windows Mail open. Now, I can't my new e-mail unless I have manually click on the send/receive button. I have the parameters monitored to check for new messages every 5 minutes. What am I doing wrong now?

  Thanks for any help!

  Yes, I use Vista, funny... it's windown help that popped up for me! Sorry!

  It is ok. For most wanted if sure we had dealing with. This is the forum for Vista for the future.

  Vista implemented network, electronic mail and to get online
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  Tools | Options | In general. East: send and receive at startup checked? Also try to set it to 6 or 4 minutes. Send yourself a test message and immediately close WinMail. Wait a minute, then open a WinMail. A little luck?

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• How to install the new hard drive and windows key?

  Hello

  I have a aspire v5-121-c72g32nkk.
  I have just updated to Windows 10, don't panic, but I want to upgrade my HD drive to a SSD drive.

  You can find the steps to do this?
  Windows was preinstalled, how I reinstall on another drive?
  I have no serial key or whatever it is.
  I'm a bit lost, you have an idea?

  Best,

  There are several ways to do this, anyone have product keys, since

  If you want to do a clean install:

  Windows 7-8 - 8.1 keys are embeeded on your BIOS

  Windows 10 use a generic key during the upgrade, so just skip the steps questions about a product key and the first time you connect on the web, it will authenticate to.

  You must decide:

  (1) do a clean install of your operating system to factory

  (2) make a disk - image of the system image and reload

  (3) to do a clean install of windows 10

  option 2 is the fastest at the end, as you create a copy of your HARD drive and reload it to your PC.

  you need a bootable windows 10 (USB or DVD) media and little space on external HARD drive.

• RE-INSTALL CS5 AFTER THE NEW HARD DRIVE INSTALLATION

  I had to replace my hard drive and now want to re - install my CS5 and Lightroom.

  Can you help me?

  Pete

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html