Retrieve the status of VM cloning

Hi all, is - anyone has any sample power CLI to retrieve the State of the virtual machine cloning without having to go through the vSphere Client?

Why don't you just...

Get task? | {$_ .name - like 'CloneVm_Task'}

Tags: VMware

Similar Questions

My Firefox 15.0.1 cannot check all CA of SSL, it is said: "Cound not verify certificate for unknown reasons" when I find out the status of the certificate.

Recently, I went to Windows 8 (from 7) and installed Firefox 15.0.1. Whenever I try to access a page secure HTTP I get a message that "this connection is untrusted. If I click on add exception and display the status of certificate I get the following message every time: "Cound not verify certificate for unknown reasons."

I checked these sites in other browsers and they work fine. I also checked the certificates using this site: http://www.networking4all.com/en/support/tools/site+check/

I tried to start firefox in compatibility mode of as and when that didn't help, I reinstalled it but nothing is changed. I use chrome for now but I hope that's not the only solution.

What security (firewall, antivirus) software do you have?

Some firewalls monitor secure connections (https) and send their own certificate instead of the certificate of the Web site.

You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.
- Click on the link at the bottom of the error page: "I understand the risks".
Let Firefox recover the certificate: "Add Exception"-> "get certificate".
- Click on the "view..." button. "and inspect the certificate and the Coachman, who is the sender.
You can see more details like the intermediate certificates that are used in the details pane.

Insider source subscription. Could not retrieve the client certificate

Hi all

I created subscription source initiated between two Windows 2008 R2.

The source (client) cannot connect to the server. Logs on the client:

Send the request for operation to the destination machine enumeration and the server.corp.domain.com:5986 port

Authenticate the user using the Client certificate mechanism

User authentication failed. The credentials did not work.

Has received the answer of the layer network; status: 401 (HTTP_STATUS_DENIED)

WSMan enumeration operation failed, error code 5

Opens a session on the server.

Sending HTTP error to the client after a failure of transportation.
The HTTP status code is 503
The error code is 995

Could not retrieve the client certificate

Send the HTTP 401 response to the client and disconnect the connection after sending the answer

The user authorization failed with error 5Authorizing the user

Authentication using client certificate with the client.corp.domain.com object is successfully

How to fix the error "unable to retrieve the client certificate?

Hello

Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

Receive error message: "help topic is not found. This content under construction. We were able to retrieve the requested topic. »

original title: Windows Help and Support link no longer works.

Very recently, in trying to use the help and Support Windows a blank page appears with the following error message:

Help topic "not found".

This content under construction

We were able to retrieve the requested topic. »

The same problem also happens with IE8 help and Support.

Hello TodAce,

Please see the link below on the Microsoft TechNet Forums. There is another user posted the same error message. Please let us know status.

Help and Support - screen text formatted correctly hyperlinks / missing

http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/b3a7ddd0-59D3-4386-ab70-3f48424447b6

Retrieve the values of the executable (Dialog.Ask)

Hello world!

I have a situation where I have to ask the user a question according to the status of a remote object (sent to a web service). This operation is performed within a Thread, so I can't directly use the Dialog.Ask () because it translates into the exception "Engine UI consulted without holding the lock of the event". I used this code sample to get the dialog to the user
```
        synchronized(UiApplication.getEventLock()) {            Runnable push = new Runnable() {

                public void run() {                    Dialog.ask(message, choices, 0);                }

            };

            UiApplication.getUiApplication().invokeLater(push);        }
```
This work is nice, but I can't retrieve the result... And because it's in a thread, I don't know how I could get it... Can someone help me with this one?

Thank you!

You usually use

Synchronized (UiApplication.getEventLock ())

or

UiApplication.getUiApplication (.invokeLater)

There's no value in using both at the same time.

In this case, the Dialog.ask returns an int, that indicates the result. The doc of the API:

Returns:
The selection of your choice (not the index) value, as must be returned by getSelectedValue(). For example, CANCEL, OK or DELETE are among the possible return values.

Thus, you can code something like:

int i = Dialog.ask (...);

Treat the i then returned.

Without doubt, you actually want to return the result in your calling Thread. I don't know how "legal", it is, but you might be able to get away with:

selectedChoice int = - 1;

{Synchronized (UiApplication.getEventLock ())}
selectedChoice = Dialog.ask (.);

}

If you can't do that, then look to split the treatment at the time of questions and using a DialogClosedListener to the decision of the user process. I don't know there are other options, just of can't think right now.

Detection of failover of change to the status of the link network

Hello
Is there a way you can change the detection network failover of a distributed port (VcDistributedVirtualPortgroup) to the status of link group?
Kind regards
Jonathan

Watch the workflow of library I wrote:

/ Library, vCenter, Networking, Distributed Virtual Port Group/update distributed group virtual port

This workflow has all the necessary code so duplicate and remove the stuff you don't need. Do NOT run this workflow on a production dvPortgroup - it does not retrieve all the current settings and their maintenance. It is intended as a stream of teaching work to provide a code base for people to work from your use cases

Failed to retrieve the target data system for FDM 11.1.2.3 HFM adapter

Hello gurus,
: Server 1 HFM
: Server 2 FDM
Server 3: Database server
1. I have managed to create an application of FDM using FDM web client.
2. later I imported the FDM adapter - FM11X-G6-C in the Workbench of FDM and also saved the file fdmFM11XG6C.dll successfully.
3. We then defined the Machine profile and also specified with the custom sizes available in our HFM application.
4. we have then configured the adapter with success.
5. we get the following question when browse us the metadata -> control tables
Cannot retrieve the data on the target system
6 log has the following entry
Error:
Code...-2147220966
Description... System.Runtime.InteropServices.COMException (0x8004021A):
{0F677127-F815-4495-8290-AF2899C9482F}1-2147220966010/16/2013 07:41:57< servername FDM >CHsxClient.cpp282011.1.2.3.000.4045Unknown error
at HSXCLIENTLib.HsxClientClass.OpenApplication (String bstrClusterName, String bstrProduct, String bstrApp, ppIUnkServer, & object object & ppIUnkSession)
at fdmFM11XG6C.clsHFMadapter.fConnect)
Process... clsFMAdapter.fConnect
Component... D:\FM11X-G6-C_1002\AdapterComponents\fdmFM11XG6C\fdmFM11XG6C.dll
Version... 1116
Identification:
... The admin user
... Computer name < servername FDM >
Connection of FINANCIAL MANAGEMENT:
Name of the application...
Name of the cluster...
Field...
Connect status... No open connection
* Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:57] *.
-------------------------------------------------------------
ERROR:
Code............................................. 10054
Description... Adapter function [fConnect] failed.
Process... clsBlockProcessor.DimensionList
The component... upsWBlockProcessorDM
Version.......................................... 1112
Thread........................................... 80304
IDENTIFICATION:
User............................................. admin
... Computer name < servername FDM >
Name of the application... < name of application of FDM >
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Server data... < database server name >
Name of database < database name >
Trust connect... Fake
Connect status... Open connection
GLOBALS:
Location......................................... Sample
Location ID... 748
Location Seg... 2
Category......................................... WLCat
ID of the category... 12
Period........................................... Oct - 2013
Period ID........................................ 10/31/2013
POV Local........................................ Fake
Language......................................... 1033
User Level....................................... 1
All Partitions... True
Is Auditor....................................... Fake
* Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:58] *.
-------------------------------------------------------------
ERROR:
Code...-2146818234
Description... Adapter function [fConnect] failed.
Procedure........................................ ObjScriptReturnMarshaler.GetDimensionList
Any help will be much appreciated.

Thank you all for your help...

It was a problem with the Machine profile configuration, where I had updated the username and password and it had to remain a Virgin.

Keep the username blank password in the configuration of the machine profile has solved the problem.

ORA-01124: cannot retrieve the data file 1 - file is in use or recovery
I'm trying to recover the database in waiting, but it gives the error below.

ORA-00283: cool cancelled due to errors
ORA-01124: cannot retrieve the data file 1 - file is in use or recovery, the recovery is already said
ORA-01110: data file 1: ' I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'

When I checked in the alert log recovery is not started. and later I hae given ' alter database recover Cancel "and the command to meet with the threshold.

"media recovery has not started.

It seems that the recovery was stuck between the two.
Please advise me how to kill the recovery session that is stuck. because I don't want to bounce the database pending.

Thanks in advance.
Dataguard and MRP, you run a script before.

In a standby scripted, a session to RETRIEVE the DATABASE would an UNTIL clause (SEQUENCE up to THAT most likely). At the end of the recovery at this point (SEQUENCE #), he left and stop at the database.

In addition, the script is such that when a RECOVERY session is active, another session is not authorized to start. It can loop in pending state or go out and do it again the next scheduled interval.

Apparently your startup script is not strong enough to prevent another session of RECOVERY to start even though the first is active (or it doesn't have a good up to THAT clause and stop, exit, closing stocks)

What you have is a custom implementation of a database of pending. Without all the details of the script, the 'blocking' between sessions (to avoid a second RECOVER start when one is already running) etc... We can't really do much to help you.
Your scripts must be standing with status information. It should be possible for you to discover the 'other' sqlplus session which emanates a DATABASE to RECOVER, but not yet out (p. ex... How about a simple "ps - ef |") grep sql' and ' ps - ef | combination of grep ora"?)

Hemant K Collette

Published by: Hemant K Collette on May 29, 2013 17:47

How to retrieve the value of base on the value on other nodes
Hi, I have a XML below
<? XML version = "1.0" encoding = "iso-8859-1"? > <? XML-stylesheet type = "text/xsl" href="C:\temp\horizontal.xsl"? " >
< Type report = "REPORT" >
< prop Type = 'Result' Flags = "0 x 0" > "
< prop Name = 'STEP' Type = "Obj" Flags = "0 x 0" > "
< prop Name = 'Sequence' >
< prop Name = 'RList' >
< ArrayElementPrototype Type = "TEResult" Flags = "0 x 0" > "
< / ArrayElementPrototype >
< value ID "[0]" = >
< prop Type = 'Result' Flags = "0 x 0" > "
< prop Name = "Status" Type = "String" Flags = "0x400000" > "
< value > < / value >
< / prop >
< prop Name = "ReportText" Type = "String" Flags = "0x400000" > "
< value > < / value >
< / prop >
< prop Name = "Common" Type = "Obj" TypeName = "CommonResults" Flags = "0 x 0" > "
< / prop >

< / prop >
< / value >
< value ID "[60]" = > = > ID is not set
< prop Type = 'Result' Flags = "0 x 0" > "
< prop Name = "Error" Type = "Obj" TypeName = "Error" Flags = "0x400000" > "
< prop Name = "Code" Type = "Number" Flags = "0x400000" > "
< value > 0 < / value >
< / prop >
< prop Name = "Msg" Type = "String" Flags = "0x400000" > "
< value > < / value >
< / prop >
< prop Name = "occurred" Type = "Boolean" Flags = "0x400000" > "
< value > false < / value >
< / prop >
< / prop >
< prop Name = "Status" Type = "String" Flags = "0x400000" > "
< value > spent < / value >
< / prop >
< prop Name = "Numeric" Type = "Number" NumFmt = "%i" Flags = "0 x 2400" > "
< Value > * 88 * < / value > = > value I want back
< / prop >
< prop Name = "ReportText" Type = "String" Flags = "0x400000" > "
< value > < / value >
< / prop >
< prop Name = "Common" Type = "Obj" TypeName = "CommonResults" Flags = "0 x 0" > "
< / prop >
< prop Name = "Units" Type = "String" Flags = "0x2000" > "
< Value >TESTDATA< / value > = > basic data
< / prop >

< / prop >
< / value >

< / prop >
< / prop >
< / prop >
< / prop >
< / report >

I want to retrieve the value 88 the TESTDATA found in this node, can someone show me how to recover?

Thank you

Vincent

Published by: pj * April 29, 2011 01:14
Yes, it is possible, but the query will be slightly less effective.
```
SELECT XMLQuery(
        'for $i in $d/descendant::Value/Prop
         where $i/Prop[@Name="Units"]/Value = $PropValue
         return $i/Prop[@Name="Numeric"]/Value/text()'
         passing t.object_value as "d"
               , sys_xmlgen('TESTDATA') as "PropValue"
         returning content
       ).getNumberVal()
       as result
FROM test_xml t
;
```

Help - Tuning query based on the status column
Hello
I have a query in which I need to fetch records based on values in the status column. It can contain the values 'A' and 'P '. A record can have an "A" record and a record of 'P '. My conditions are,
(1) when it is only 'A' record, can return 'A' record.
(2) for the 'A' and 'P' folder is there, then return 'A' record.
(3) when 'P' registration is only, then return 'P' registration.
There are about 3 records 'A' Lake and 3K 'P '. I tried to use 'by' clause queries, but performance are too bad and I am not able to use it. When running as independent queries 'A' retrieval of documents is faster compared to the records of 'P '. When running in 'by' clause of the query is suspended. Please can anyone help how can be managed?

Due to restrictions, I won't be able to view the actual code. I post here a sample.

Example code:
```
WITH q1 AS
     (SELECT *
        FROM tab
       WHERE status = 'A'),
     q2 AS
     (SELECT *
        FROM tab
       WHERE status = 'P'),
     q3 AS
     (SELECT *
        FROM q1
      UNION ALL
      (SELECT *
         FROM q2
        WHERE NOT EXISTS (SELECT 1
                            FROM q1)))
SELECT *
  FROM q3
 WHERE ROWNUM < 501;
```
Thank you
Kadoch
One way is to use analytics like this:
```
SELECT *
FROM (SELECT t.*, ROW_NUMBER() OVER (PARTITION BY 
                                     ORDER BY t.status) rn
      FROM tab t
      WHERE t.status IN ('A', 'P'))
WHERE rn = 1
```
John

Retrieve the State of the menubar control station
So I don't see the menu bar items can be defined as type = "check", which means that it behaves like a checkbox with a Boolean State.

< label menuitem = "Foo" type = "check" enabled = "true" / >

My problem is that I can't seem to understand how to reference this object to retrieve its State. If the type of radio, it's all right to the front where the declaration contains a groupName attribute to retrieve the value. Is there something similar that can be done to get the Boolean status of an item of type check?
Don't know what you use to capture the Click event, but it is an example. You need access to the atrtibute of the rocker.

private void menuHandler(event:MenuEvent):void {}

Alert.Show (Event.Item.@Toggled);
}

10gr 2-Sybase15-ORA-28545: cannot retrieve the text of the message from NETWORK/NCR
Hi all

I am trying to establish connectivity between Oracle 10 g 2 (Win XP Pro 2002) and Sybase ASE 15.0.2 (Sun Solaris 5.9) by using the transparent gateway for Sybase (TG4SYBS), but encountered the following error. I have looked for a solution quite well in all directions, but so far have been quite unlucky. This is my last resort. I don't really know what I'm doing wrong as I followed the steps of installation and configuration correctly. Please note:
-Oracle transparent gateway software and database are installed in different homes; and,
-J' created and tested the ODBC DSN connectivity with the Sybase server.

The only thing that I have real concern about is the version of the Sybase server 64-bit OS; Windows Oracle server is 32-bit. Are going to count this could be the problem?

ORA-28545: error diagnosed by Net8 when connecting to an agent
Cannot retrieve the text of the message NETWORK/NCR 65535
ORA-02063: preceding 2 lines of CSSTAT

I am enclosing also any of the configuration system below:

------------------------------------------------------------------------------

Database server
===============

V Windows XP Professional 2002 SP2

Oracle Database 10g Enterprise Edition Release 10.2.0.1.0

Sybase Adaptive Server ODBC Driver 15.00.00.152

C:\ > echo %path%
C:\oracle\product\10.2.0\tg_1\bin; E:\OracleHomes\agent10g\jlib; E:\OracleHomes\ag
ent10g\bin; E:\OracleHomes\oms10g\bin; E:\OracleHomes\oms10g\jlib; C:\Program Files
Company \Business Objects\BusinessObjects 6\bin\orb\asp\6.0\bin. C:\Program Fi
les\Business Objects\BusinessObjects Enterprise 6\bin\orb\bin; C:\Program Files\B
usiness Objects\BusinessObjects Enterprise 6\bin; C:\sybase\DataAccess\OLEDB\dll;
C:\sybase\DataAccess\ODBC\dll; C:\sybase\Shared\Sybase Central 4.3; C:\sybase\OCS-
15_0\lib3p; C:\sybase\OCS-15_0\dll; C:\sybase\OCS-15_0\bin; C:\sybase\JS-12_5\bin; C
: \sybase\ADO.NET\dll; C:\sybase\ODBC; C:\Program WinRAR; C:\Windows\System32;
C:\WINDOWS; C:\WINDOWS\System32\Wbem; C:\sybase\DBISQL\bin

------------------------------------------------------------------------------

Sybase server
=============

Er1min01 of SunOS 5.9 Generic_122300-11 sun4u sparc SUNW, Sun-Fire-V440

Adaptive Server Enterprise/15.0.2/EBF 14328, P, Sun_svr4, OS 5.8/ase1502/2486/64-b
IT/FBO/Thursday 24 May 12:18:26 2007

------------------------------------------------------------------------------

Sybase SQL.ini
==============

[MINSAT]
Master = TCP, 192.168.1.150, 5002
Query = TCP, 192.168.1.150, 5002

------------------------------------------------------------------------------

C:\oracle\product\10.2.0\tg_1 > tg4sybs

Oracle Corporation - WEDNESDAY SEP 23 2009 02:43:29.406

Heterogeneous Agent Release 10.2.0.1.0 - Production built with
Driver for SYBASE

------------------------------------------------------------------------------

inittg4sybs.ora
===============

# This is an example of initialization file of the agent that contains the HS settings
# needed for the transparent gateway for Sybase

#
# HS init parameters
#
HS_FDS_CONNECT_INFO = MINSAT.csstat
HS_FDS_TRACE_LEVEL = OFF
HS_FDS_RECOVERY_ACCOUNT = RECOVERY
HS_FDS_RECOVERY_PWD = RECOVERY
#HS_FDS_TRANSACTION_MODEL = READ_ONLY

#
# Required for Sybase environment variables
#
SYBASE the value = "C:\\sybase".

------------------------------------------------------------------------------

Listener.ora
============

listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.

SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(= Extproc PROGRAM)
)
(SID_DESC =
(SID_NAME = csstat)
(ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
(PROGRAM = tg4sybs)
)
)

LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
)
)

SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER = OFF

------------------------------------------------------------------------------

tnsnames.ora
============

tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.

TEMP =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TEMP)
)
)

csstat =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.123.49)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = csstat)
)
(HS = OK)
)

EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)

------------------------------------------------------------------------------

C:\oracle\product\10.2.0\db_1\BIN > lsnrctl status CSSTAT

LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-SEP-2009 02:47
: 10

Copyright (c) 1991, 2005, Oracle. All rights reserved.

Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.123.49) (PORT = 152
((1)) (CONNECT_DATA = (Server = Dedicated) (service_name = csstat))(HS=OK))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - production
ction
Start date 23 - SEP - 2009 01:48:54
Uptime 0 days 0 h 58 min 16 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Listener parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.o
RA
Listener log file C:\oracle\product\10.2.0\db_1\network\log\listener.log

Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=FH) (PORT = 1521)))
Summary of services...
Service 'OEMREP_XPT' has 1 instance (s).
'Oemrep' instance, State LOAN, has 1 operation for this service...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
Service 'TEMPXDB' has 1 instance (s).
Instance 'temp', State LOAN, has 1 operation for this service...
Service 'TEMP_XPT' has 1 instance (s).
Instance 'temp', State LOAN, has 1 operation for this service...
Service 'csstat' has 1 instance (s).
Instance of 'csstat', status UNKNOWN, has 1 operation for this service...
Service 'oemrep' has 1 instance (s).
'Oemrep' instance, State LOAN, has 1 operation for this service...
'Temp' service has 1 instance (s).
Instance 'temp', State LOAN, has 1 operation for this service...
The command completed successfully

------------------------------------------------------------------------------

C:\oracle\product\10.2.0\db_1\BIN > tnsping CSSTAT

AMT Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production 23-SEP-2
009 02:48:12

Copyright (c) 1997, 2005, Oracle. All rights reserved.

Use settings files:
C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora

TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.
123.49)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = cssta
(t)) (t)) (HS = OK))
OK (20 ms)

------------------------------------------------------------------------------

SQL > create database link csstat connect to the 'fw' identified by ' * ' using 'csstat ';

Database link created.

------------------------------------------------------------------------------

SQL > select * from sys.hs_fds_class;

FDS_CLASS_NAME
FDS_CLASS_COMMENTS
FDS_CLASS_ID

BITE
Integrated Test environment
1

------------------------------------------------------------------------------

SQL > show parameter global_names;

VALUE OF TYPE NAME
global_names boolean FALSE

------------------------------------------------------------------------------

SQL > select * from SIMSwap@csstat;
Select * from SIMSwap@csstat
*
ERROR on line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Cannot retrieve the text of the message NETWORK/NCR 65535
ORA-02063: preceding 2 lines of CSSTAT

------------------------------------------------------------------------------
you use the Oracle Listener database in C:\oracle\product\10.2.0\db_1\ to spawn TG4SYBS installed in a different House: C:\oracle\product\10.2.0\tg_1. This works when you specify the full path in the listener.ora to tg4sybs executable file. The section of SID might look like:
(SID_DESC =
(SID_NAME = csstat)
(ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
(PROGRAM = C:\oracle\product\10.2.0\tg_1\tg4sybs)
)

Then STOP and START the listener and try again.

Retrieve the desired folder

Hi currently I have this statement:

SELECT DISTINCT status,customer_id FROM contract;
{code}It will retrieve the follows:

[code]
_Status_                     _Customerid_
d                                      111
a                                      222
d                                      222
a                                      333
[/code]

How do I amend my SQL statement in such a way it will only customer_id where status is d only?

_Results should look like this:_

[code]
_Status_                     _Customerid_
     d                                 111
[/code]

And a group of

with contract as(
select 'd' status, 111 customer_id from dual
union all
select 'a', 222 from dual
union all
select 'd', 222 from dual
union all
select 'a', 333 from dual
)
select 'd' status, customer_id
from   contract
group by customer_id having(count(case when status != 'd' then 1 end) = 0);

Is it possible to add a mute icon on the status bar

I understand the desire to keep the clean status bar, but a mute icon would be really useful for many users. This is my first iPhone and I had a LIFEPROOF case to protect it. The problem is that this case does not allow me to determine the setting of the switch ring looking from the side of the phone. The only way that I can know if the ringer is on is to flip the switch back and forth while watching the status of ringtone icon screen.

Yyou possibly tell there is a problem with the case, but I bet it's true for most cases, in particular the raincoat water ones. If Apple does not support to add even an icon to the status bar at least Apple could put on display today ' hui / Notifications of menu drop-down.

You can provide feedback to Apple here, http://www.apple.com/feedback. This is a user to user support forum, and Apple is not here involved. It is the only way for them to know you want to see a change.

I just installed an airport extreme router and WiFi works, but the status light still flashes.

I just installed an airport extreme router and WiFi works, but the status light still flashes.

Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

Without our crystal ball, we do not know what is the issue.

Retrieve the status of VM cloning

Similar Questions

Maybe you are looking for