Return and replace still Images

Similar Questions

• Return and replace an AE comp while retaining the transparency of the model

  Hi all

  I have a long segment of After Effects that is a video frame that I train in first. Sorta like you see in broadcast situations, a bustling with content inside frame.

  I tried to make and replace the model of EI in the first, but I lost the transparency. I googled the subject without result, ideas for me?

  Thank you!

  * steve

  I use this rendering and replace the setting of my comps AFX and transparency is very good.

  

• Y580 return and replace Question

  My Y580 who kept crashing arrived at lenovo early Wednesday morning by UPS (August 29). Will I have an update or any notification when my replacement has been mailed? Does this occur normally in days, weeks or even a month?

  They gave me a new serial number when I received the UPS return label. However, this order number does not appear in my lenovo account and there is no change to the order before indicating the return...

  Any help or experience with this would be appreciated.

  In fact, a new happened today and work... so no update is necessary!

• PORECTOL in MS Dynamics GP 2010 - accounting units returned and replaced?

  In GP, if we order 10 units on a purchase order, we receive 10 units (or 12 if we have a tolerance of 20%).

  If we go back 5 and select 'replace returned products' option, then GP represents the units 'replaced' defaults to '5' on the next shipment transaction (a receive function).

  However, with the PORECTOL does not take into account the units replaced, and we cannot receive the units of REPLACEMENT against the PO.

  It is not acceptable to say our administrative staff to edit the purchase order and add new elements as representing more work when GP already represents for the units to replace.

  Hi Jocelyn

  Your question is beyond the scope of these forums for answers.

  Please ask your question in the support forum.

  Microsoft Dynamics - Microsoft Dynamics GP Forums Community:

  https://community.dynamics.com/product/GP/f/32.aspx?ref=PHP

  Concerning

• CSS hover code and replace the image

  on my page, I would like my visitors to fly over a div that contains the text and display a picture, would need to work in most browsers and not to disturb other tags div on my page.  is there a simple css code to do this?

  Disjoint Rollovers:

  http://ALT-Web.com/demos/CSS-disjointed-rollover-1.shtml

  http://ALT-Web.com/demos/CSS-disjointed-rollover-3.shtml

  Nancy O.

• Replacement of images in another DIV - 2nd try

  I have what I think, it's a simple problem. Unfortunately, it has ot about to be like pulling my own teeth.

  I asked once and was reprimanded by the Police of Forum Protocol for sending by mistake without a question and an "incorrect format. Lets see if I can do it right this time.

  I don't know how to use a remote site to load my page - never heard such a thing and don't know where to start and I think that most don't know - so the FAQ about who to clarify this question "correctly" cannot be done. And, there is no manual and other information on how to use the tools on this forum or edit and no way to delete (just remove it from the database of the forum - google knows where it can go) so just answer the question if you can.  There were 70 + people who read the other question, so I guess no one wants to answer, no one can answer, or there are lot of people out there looking for the same answer.

  I have an unique index HTML page that is used as a manual of a user and for a small program help system.  It is not published on the web, but a series of files HTML PREMISES which take the reader local users.

  When the user clicks the HELP button on the main GUI scripts it evokes their default browser and offers a series of flight path images (buttons) on the left in a Div (DIV 2 below), a header with a white button under the title in another Div (DIV 1 below) and a Div to swap content on an iframe with a document HTML (DIV 3 below).

  Basically, when the user clicks on one of the images button in the turnaround section (DIV 2) - I would like to place an HTML file in the iframe AND swap the image in the header/title section. This is by exchanging files html correctly in the iframe, but I can't seem to get the image in the title div that you want to change.  I tried j-script (not very good at this), using various methods of assignment of the name and ID at all properties and using the target = "", tried to move the statements inside the < a > tags and outside the < a > tags, nothing seems to work. " It is a container on the page with an object, you should be able to resolve and change it.  Sorry to be a newb - can not become just that without question when stuck and no responses are on the forum with several hours of research.  Without answers, I can't learn.

  PLEASE HELP WITH THIS...   HOW CAN YOU...

  Replace the DIV1 image with the image of the button selected in DIV2... and change the content of the iframe?

  <!- DIV 1 ->

  < div id = "midpanel" >

  < style p = "do-family:"Arial Black", Gadget, without serif;" font-size: 2.5em; "> < img alt ="Icon of the DJ' src = "assets/ICON pictures/EEIconSet148x48.png" style = "border: 0pt none;" "padding-left: 350px" / > manual < br / >

  < img src = "Assets/screen objects/white 100x24.png yellow button" alt = "What shows in the image below" name = "CurrentText' width = '121' height = '29' id ="CurrentText"/ > < / p >

  < / div >

  <!-- ----------------------------------------------------------------------------------------- -- -->

  <!- DIV 2 ->

  < div id = "Divap1" >

  < br / >

  "" < a href = "Manual/DJ may" target = "myIframe1" MM_swapImgRestore "onmouseover ="MM_swapImage ('Overviewbutton ',", ' Objects/overview1.png', 1 assets/screen)" onclick = "shownextpic (0)" >

  < img src = "Assets/screen objects/geographique1 OFF.png" alt = "Preview button" name = "Overviewbutton" width = "100" height = "24" border = "0" id = "Overviewbutton" / >

  <!-change-> CurrentText image with the preview image

  < /a >

  <!-several other image onmouseover buttons are here, but omitted->

  < / div >

  <!-- ----------------------------------------------------------------------------------------- -- -->

  <!-select the menu item, load the html page in the iframe and replace the image in Midpanelpage2 with the image you have just clicked. ->

  <!- DIV 3 ->

  < div id = "Divap2" >

  < iframe name = "myIframe1" id = "myIframe1" src = "Manual/Welcome to DJs.htm" height = "400" width = "650" allowtransparency = "true" frameborder = "0" >

  < p > your browser does not work

  compatible with IFRAMES, please upgrade to a modern browser that is.

  < /p >

  < / iframe >

  < / div >

  <!-- ----------------------------------------------------------------------------------------- -- -->

  <!-change the 'CurrentText' image in the div id = id of the object "midpanelpage2" = "CurrentText" with the image of "Présentation" in the div id = 'Divap1' id = 'Overviewbutton' I can't seem to get the image referenced with "CurrentText' to go to the image referenced in Divap1 HOW DO YOU CHANGE?-->

  LikeITis2 - GoodGuy trying to tell you that it is REALLY HARD to help you give without a site online to watch.

  That being said, I'll give it a shot.

  The Div 2 onClick statement is precisely where you want to focus your attention.

  I'm not an expert of javascript, but here's a breakdown of top level of what must happen.

  onClick calls the javascript function shownextpic()

  Inside of the shownextpic() function you want to set the src of the 'CurrentText' image to the url of the image you want to replace it with.

  You will need a line of code that looks something like this:

  CurrentText.src = "localhost/path/to/image/file/newimage.jpg"

  A lot of tutorials on the net to Exchange images using javascript.

  Try here to get started.

  ~ codeDawg

• Advanced search and replace. How to replace the space with carriage return?

  10.9.13.0/24, 10.9.4.2/32, 10.9.4.3/32

  in

  10.9.13.0/24 10.9.4.2/32 10.9.4.3/32

  Find replace them ',' with carriage return.

  I still find articles on an advanced search and replace, but I can't seem to locate it.

  OS X El Capitan 10.11.3

  3.6.1 the numbers

  HI Brendan,

  You don't need an advanced find and replace for it.

  In the search box, press, then space.

  In the box replace by, press option-return.

  Then click Find and replace and find until you are finished.

  Kind regards

  Barry

• ? Primary Master Hard Disk S.M.A.R.T. Bad Status. WARNING: Return immediately-up your data and replace your hard drive.

  When I start my computer, an error page appears. At the bottom of the page it says, "Primary Master Hard Disk S.M.A.R.T. Status Bad." WARNING: Return immediately-up your data and replace your hard drive. Press F1 for Setup, F2 to continue"I was just pressing F2 and then it starts normally, but whenever I start my computer, the same page comes up.

  Is this serious or it could be something minor? Do you have any suggestions? What does that mean? What should I do? I followed some information in the forums of someone who has had the same problem and finally, they fixed them, they said that when they made a prior microsoft update what they where missing a Parcer.

  Note: I tried to save my data before, but something goes wrong and the backup will not be completed.

  You can download the program for diagnotics HUtil Samsung http://www.samsung.com/global/business/hdd/support/downloads/Hutil210_iso_for_CDROM_drive.zip

  It's an ISO image then unzip the file and write the ISO image to a CD.

  Then restart the PC and booting with the CD. To do this, you must change the priority/boot order in the BIOS to boot from the CD first.

  Once you have started the program HUtil it will detect your hard drive Samsung. Select the hard disk.

  Enter the main Menu on the tool. Go into the menu of the tool and enter Auto diagnosis. Enable diagnostics to run, once done it will ask you if you want to perform a surface analysis - enter Yes. The analysis of surface will take some time to complete. If errors are found, it reported.

  Once more I recommend you backup your data as soon as possible, preferably before executing HUtil program.

  For more information on the program of HUtil you can go here: http://www.samsung.com/global/business/hdd/support/utilities/Support_HUTIL.html

  Write when the cache is enabled: when data are written back to the hard drive, it is written in the cache that is much faster to actually write to the hard drive. An acknowledgement of receipt is then sent by saying that the data has been written on the hard disk, when in fact it does not. In this way so that the data is actually being written to the hard drive to the rest of the system can continue to work. However memory cache is volatile, if the power goes off, the data in the cache is destroyed and if it has not been written to disk hard and yet he's lost.

  If your settings are correct. Usually the drives are configured for performance and the write cache is enabled. While flash drives and memory cards are configured for the fast-moving and write cache is disabled.

  If you want to learn more about this: http://www.pcguide.com/ref/hdd/op/cacheWrite-c.html

• HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.

  Hello

  My HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.

  I always thought that this laptop can't run then 1 hour unplugged but still ran about 30-45 minutes before the battery is discharged (recommended HP). A few days ago I received this message when starting upwards:

  Main battery

  Failure ID-U360G0-000624-XD0002J-C0DL03

  Product ID-WQ685UA #ABA

  Replace the main battery.

  So here I am. How do I get a new battery, sent me? Thank you!

  Hello:

  It is a forum of consumer to consumer.

  Nobody here help you with warranty issues.

  You will have to contact HP support support.

  Contact HP on the link below for the country you live.  Select the option 'technical support after purchase.

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  Paul

• (GREP)? for search and replacement of para returns before a lowercase letter

  Does anyone know an automatic technique (GREP?) to find and replace para returns occurring before a letter lower case and replacing it with a space (IE to join broken paragraphs). I can currently find these occurrences, but 'change' in the grep search replaces the real lowercase letter as well as the break of Pará.

  See you soon

  Alan

  Don't know if this has been published here, or what, but in my email the request came as \\r(?=\l) and it's too many------characters before the r should be when it reads now, \r(?=\l)

• I bought and downloaded an image on my desktop, but the water mark is still there. How can I get rid of him?

  I bought and downloaded an image on my desktop, but the water mark is still there. How can I get rid of him?

  Follow the steps in these screenshots: I bought a stock image and I can't seem to upload the image under a license without the watermark? Please help

• How can I get the videos and stills to appear in the order early in the timeline, and not all images so all the videos. I chose the oldest Date

  Hi I have a mix of photos and video clips loaded into my Mac Adobe organizer of the external drive, where they show (on PC) in the correct order as, still images and videos mixed. After loading in the Organizer, and chronology in first 12 items, I select more "old first". But in the timeline, stills appear first in the correct order, then after that video clips, in the correct order in themselves. Is it possible to actually load everything in the right order, IE pictures and videos mixed. Thanks Chris

  Chris

  Thanks for the follow-up.

  Be strictly one of the Windows elements, I can not give you a 100% guarantee for the use of the organizing elements Mac Albums to get your first items editor Timeline ordering media, but what I've read, the chances are good for working on the item Organizer organizing Mac as well as windows.

  We will review your progress as your schedule allows.

  Best wishes

  RTA

• Replace the Image and add text - new edition of content of the javascript tools commands

  With the new content tools Adobe XI of edition, can someone please advise if there is javascript for the following commands:

  • Replace the Image
  • Add text

  Replace the Image

  I have a pdf document with an image that is manually replaced by content (it is a logo) of the editing tools.

  Add text

  The same pdf document has text added manually by the content of modification of the tools as well (it's the same text each time).

  Can someone advise please basic commands javascript I can use to help me get started, because the process described above is very tedious when done by hand and repeated several times a day?

  Script to add text via content editing tool method is the goal, I try to avoid adding a text field, the pdf will be flattened at the end of the process in this way.

  Advice and assistance will be most appreciated.

  Thank you.

  
  

  You can use a button to display an image and import an image as an icon of the button file programmatically. You will use the field.buttonImportIcon for this JavaScript method.

• I use iphone videos and still images in a project.  When I drag the videos in the timeline, they work fine, but when I drag still images, I have only a small part of the original photo.  No idea how to solve this problem?

  I use iphone videos and still images in a project of first Pro CC.  When I drag the videos in the timeline, they work fine, but when I drag still images, I have only a small part of the original photo.  No idea how to solve this problem?

  Right click on the photo in sequence and "ladder to the chassis '. Can also be set in the preferences and affect imports after the change

  Thank you

  Jeff

• sequence right and export of settings in Premiere Pro CS6, video with still images

  I am trying to run a video on my site (self hosted). This video, made with Premiere Pro CS6, consists of still images with different video effects.

  This video is just 50 seconds, but when I have this turn in the format mp4, webm and ogg, get large files and the quality is not good.

  Could you please guide me to find good sequence and export of settings in Premiere Pro CS6 to get a video for the best possible quality on the web?

  A precise description of the parameters would be great.

  Thank you

  Silvia

  To export, set the resolution that you want to use on the web.

  Make the sequence of parameters in a way to export these settings