Paths always down after returning from a SAN switch at the service

Similar Questions

• Satellite L falls down after returning from the mode "sleep."

  My laptop has this bug, whenever he goes to "sleep" when it "wake up" the system said that Explorer windows stopped working and almost everytime I have to restart with the power switch. I changed the operating system from Vista to windows 7, but he continues to act like that. Someone at - it a solution?

  Hello

  For me, it looks like a Windows operating system problem.
  Maybe you should try a CCLeaner which cleans up the registry and other files on the HARD drive.
  You should also try to defragment the HARD drive.
  If no improvement is noticeable and Explorer windows would keep crashing, then a new installation of operating system is necessary.

  Good luck

• why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  Hi James,

  Let us know a few details about the issue.

  1. which operating system you have installed on the computer?

  2. what web browser do you use to open itv player?

  3. are you able to play other videos online on other sites?

  If you use Internet Explorer, then you follow these methods.

  Method 1:

  You can run the fix for video problems in Internet Explorer.

  Playing video files crashes or blocking Internet Explorer - Windows

  http://support.Microsoft.com/mats/video_freezes_or_crashes/

  Method 2:

  You can also follow the steps in the following article and check.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings and Add-ons. We recommend that you note these sites before using Internet Explorer settings reset feature and re - activate the Add-ons.

  Feel free to get back to us for other queries.

• How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  Joshua Smith

  Are you referring to the evolution of the virtual machines network portgroup of one to the other and in your case potentially issue on to another vSwitch? If so, take a look at this script: updateVMPortgroup.pl everything you do really makes a call to ReconfigVM_Task() and passing in a specification change and put to day the network in which you want to change

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• XP Home BSOD after return from standby (Standby).

  Here is the data from the Minidump:
  

  Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\WINDOWS\Minidump\Mini010510-12.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows XP Kernel Version 2600 (Service Pack 3) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer personal TerminalServer
  Built by: 2600.xpsp_sp3_gdr. 090804 1435
  Computer name:
  Kernel base = 0x804d7000 PsLoadedModuleList = 0x805634c0
  The debugging session: 21:51:44.500 Mar 5 Jan 2010 (GMT-5)
  System Uptime: 0 days 0:02:15.234
  Loading the kernel symbols
  ...............................................................
  ...................................................
  Loading user symbols
  Loading unloaded module list
  ..........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck F4, {3, 8a 105524, 8060567e, 8a1053b0}

  Unable to get nt! KiCurrentEtwBufferOffset
  Unable to get nt! KiCurrentEtwBufferBase
  Probably caused by: hardware_disk (+ fc)

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  CRITICAL_OBJECT_TERMINATION (f4)
  A process or thread crucial to system operation has unexpectedly left or been
  terminated.
  Several processes and threads are necessary to the functioning of the
  System; When they are finished (for some reason any), the system may not
  function longer.
  Arguments:
  Arg1: 00000003, process
  Arg2: 8a1053b0, object of ends
  Arg3: 8A 105524, name of the process image file
  Arg4: 8060567e, explanatory message (ascii)

  Debugging information:
  ------------------

  Unable to get nt! KiCurrentEtwBufferOffset
  Unable to get nt! KiCurrentEtwBufferBase

  PROCESS_OBJECT: 8a1053b0

  Nom_image: hardware_disk

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  FAULTING_MODULE: 00000000

  Nom_processus: csrss.exe

  EXCEPTION_RECORD: b730f9d8-(.exr 0xffffffffb730f9d8)
  ExceptionAddress: 75b7b3b9
  ExceptionCode: c0000006 (in page i/o error)
  ExceptionFlags: 00000000
  NumberParameters: 3
  Parameter [0]: 00000000
  Parameter [1]: 75b7b3b9
  Parameter [2]: c000000e
  A paging operation is not to 75b7b3b9, because I/O error c000000e

  EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The required data were not placed in memory due to a State of error / "0 x % 08 lx.

  CUSTOMER_CRASH_COUNT: 12

  DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

  Error_code: (NTSTATUS) 0xc0000006 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The required data were not placed in memory due to a State of error / "0 x % 08 lx.

  EXCEPTION_PARAMETER1: 00000000

  EXCEPTION_PARAMETER2: 75b7b3b9

  EXCEPTION_PARAMETER3: c000000e

  IO_ERROR: (NTSTATUS) 0xc000000e - a device which does not exist was specified.

  EXCEPTION_STR: 0xc0000006_c000000e

  FAULTING_IP:
  + fc
  75b7b3b9?              ???

  BUGCHECK_STR: 0xF4_IOERR_C000000E

  FOLLOWUP_IP:
  + fc
  75b7b3b9?              ???

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: hardware_disk

  SYMBOL_NAME: + fc

  STACK_COMMAND: kb

  FAILURE_BUCKET_ID: 0xF4_IOERR_C000000E_ + cf

  BUCKET_ID: 0xF4_IOERR_C000000E_ + cf

  Follow-up: MachineOwner
  ---------

  I tried; disconnect all usb drives, updating the drivers of Intel 82801FB/FMB, update drivers from Nvidia 9800GT chipset, disable the write cache on the SATA drive, update the network drivers.

  System works perfectly otherwise. Its own BSOD during the return of the mode standby.

  I solved this problem just: my setup had 2 cd discs using the primary IDE channel and a Sata drive on the 2nd Sata channel.

  I bought the computer used and it was how it has been implemented (and it worked fine in this config without using sleep).

  It turns out that the HD (with the top OS) must be connected on the first channel of Sata (Sata (0) on my Dell) so he can wake up correctly the mode standby.
   
  I just disconnected the Sata round cable and moved to first, then changed the BIOS to reflect this change, and everything's fine.

• Satellite A30: System busy after returning from standby

  My abrupt A30 Satellite developed a problem when returning from standby mode. The system busy "Hourglass" is constantly and will not die. I have reploaded the power management utility since all options in 'Properties of power Option' are grayed out except for the "Power Meter" tab. It did make a difference.

  This problem appears at the beginning?
  Maybe the operating system has been installed there several times and now the registry entries are corrupted.
  This is why the system busy hourglass may appear.

  I m not 100% sure that this will help, but maybe you need to reinstall the whole OS
  On the new OS installed should all work a lot faster

• BlackBerry smartphones impossible to update the applications after returning from deployment

  I really send an SOS to you all, but right now I need help.  I've just returned from a seven-month deployment and was not able to use my new 2 "BOLD" for the duration of my output.  I forgot my answer to the question on my security question and impossible to reset my password.  Who should I contact to get a discount to re-set for my account?

  Hi and welcome to the forums!

  If you are referring to the security password to unlock your device, you will not be able to recover it or changed it. You will have 10 attempts to open it and then our device will perform a security wipe.

  If you are referring to your selection of the site password BIS forgotten password. You will receive a PIN message with your password.

  If your device does not work, use the attached link to get all the necessary information and then call your operator.

  Thank you

  Bifocals

  KB10385 Several attempts to enter a password prompt a warning that data will be erased from the BlackBerry smartphone

  KB04665 NSE, MEID, ICCID, IMEI, IMSI, PIN and SIM

• Cannot delete messages in Windows Live Mail after returning from 10 of Windows to Windows 7

  Separated from this thread.

  Hello. Want to jump in here even if it is an old thread. I have the same problem and have tried all the suggestions, my problem actually started when I upgraded to my wife and many win 10 is not ready for the change, so I'm back to Win 7 Home Premium. I contacted Ms. Tech Chat and was told to uninstall Windows 7 to "perhaps" to solve the problem. This is not acceptable. Everyone has to come with a fix or work around.

  Want to jump in here even if it is an old thread.

  It is rarely a good idea. If the solution has not worked, it is always best to use the option to ask a question on the menu to participate to start your own thread. There are so many variables involved that universal solutions are difficult to find. This is especially true when the title of the thread in the validation is not specific. For example, you also see a reading UID store failederror message?

  I have the same problem...

  I doubt it, because...

  ... my problem actually started when I upgraded to win 10 and... returned to Win 7

  It's a completely different scenario that could not arise last May when the thread you posted in was up-to-date.

  It seems that many of those who go back to Windows 7 from Windows 10 experience a corruption of the store folder (the folder where messages, calendars and the account settings are stored). According to your storage folder is how complex (several accounts, calendars a lot, a lot of messages number of files), it can be simpler to just create a new storage folder and fills again:

  1. Looking at your list of messages in Windows Live Mail, press Ctrl-Shift-O for Options. On the Advanced tab, click Maintenance and then store the file. Copy the path to locate the storage folder.
  2. Close Windows Live Mail and wait a few minutes (the program will continue to run in the background, while he does his household).
  3. Press the Windows key + E to open an Explorer window, and then paste or type the path that you copied to the (1) in the address bar and press ENTER. This should open your storage folder.
  4. Right-click on the name of the folder in the navigation pane, and select Rename. Call the Live Mail Backup.
  5. A repair must check that all the program files are present and correct and properly registered, as appropriate. To do this, close all running programs, and then press Windows key + R, type wlarp and press ENTER. In the window that opens, select repair all Windows Essentials programs:

     

  
  When it is finished, restart the computer.
  1. Start Windows Live Mail and wait the program installs before doing anything. Press Ctrl-Shift-T to start the add your Assistant e-mail accounts and follow the prompts to add your e-mail accounts.
  2. Click once on the work online on the status bar and deconnecter disconnect Internet to avoid interference email downloads, and then use the file > import messages (I Alt - F) and point the wizard to the Live Mail Backup folder level. Do not intervene while the import happens.
  3. Leave the program alone for a while (an hour or two, or even a night or more) to enable him to reindex all your messages, then close and wait half an hour for the program to do his household.
  4. Relaunch the program and look at your messages under folder imported into storage folders. Take it slow, drag files out of any folder and drop in the location you want. Again, give the program time to re - indexing messages in their new location.

  Note that you can not drag files out of storage files. If you want to forward messages to a high plu account folder in the folders pane, you need to select messages to transfer, and then use the right click > move or copy folder. The controls are also available as buttons in the folders of the Ribbon tab.

• Gel after returning from standby

  Windows 7 64 bit

  I use a lot of waiting. After that I wake the computer from sleep mode, it works as expected; but sometimes, when I run a program (usually VLC), the PC freezes, more input not possible, hard power off required. This isn't a problem of input device. The power button on my computer should cause the PC to stop but does not either when the system is frozen.

  If I do start VLC (or another program that causes the gel), the PC would either freeze during shutdown (power off), or follow these steps if I started the day before: the rotation of the drives down, monitors are not getting a signal more, cooling fans and the CPU fan still spinning. After about 5 minutes the PC turns off hard.

  When I turn on the PC after a hard stop, the message "Windows is not stopped correctly. You want to try safe mode? »

  I composed the PC myself, so I have to identify the material originally from the problem... If it was caused by the material. I know that it's not caused by my hard drives of 2 TB. I know there is a similar problem, caused by the slow rotation of the 2 TB drives implementation. I tested my system will detect the connected disks and it still frozen. Disable all startup items has not solved the problem.

  Here is a list of my equipment:

  Mobo:
  980DE3/U3S3
  CPU:
  AMD FX 8320
  RAM:
  2x8GB crucial DDR3 of Sport
  Video card:
  ASUS Radeon R7260X, PCIE
  HARD DRIVE:

  Crucial MX100, SATA (SSD)

  various bis Magnetfestplatten 2 TB

  OPERATING SYSTEM:
  Windows 7 64 bit

  POWER SUPPLY:

  800W

  Yet another update:

  I recently installed Windows 7 new and frost have yet taken place. Only a few programs have been used:

  Chrome, Skype and VLC (since these seem to 'help' freezes)

  I also tried Ubuntu, where the system does not freeze. This could be because Ubuntu uses a different expectation.

  Currently I am in my old Win 7 installation and try different programs, not only not their use.

  Firefox instead of Chrome-> gel

  No VLC-> gel

  No Skype-> gel

  Thus, any of these programs makes my PC freeze

  ASRock (my mobo manufacturer) suspected hardware fault. Alas, I can't trace it either PSU or mobo.

  Install Windows 7 from scratch, I realized sleep (aka standby) is usable only if the video card drivers are installed. It may be that this device / driver is the culprit?

  Edit: it seems I found what caused the problem: Reader adobe flash (plugin). Since it is used by Chrome and firefox in watching Youtube, my system froze with the two programs. Since I updated the driver (including firefox only suggested) no more freezes have been held since a few days now. This may be premature if. I will present after a while to confirm.
  Meanwhile, I post a link to a thread that seems to focus on the same problem:
  http://www.TomsHardware.co.UK/Forum/67304-63-Flash-content-freezing-computer

• Impossible to install Acrobat Reader after returning from 10 Windows to Windows 7

  Hi, I tried all kinds of solutions to reinstall Acrobat Reader after you have reinstalled Windows seven. I get a message saying that the AcroRead.msi path is not available. I tried to use the cleaning tool and remove the Data/Adobe/Setup program and full of numbers, but it comes back!

  Help please!

  Hi and thanks for your response. I finally found a solution for download Winfix and to regulate the installation and uninstallation problem.

  The message that I continued to receive was the path to AcroRead.msi wasn't available.

  THX.

  Sent from my iPad

• Portege R830 - 3G fails to initialize after returning from hibetnation

  Hello world

  I have had a Toshiba R830 for almost two years now and I love it. Even more after a few months at the time I discovered, he had 3G capacity.
  At first (with the original drivers) the capacity of the 3G does that 2 times on 3.
  Other times he would be stuck "initialization".

  I found and downloaded the latest drivers (as far as I could find) of this site and the problem is * mainly * gone but it's a pain when it happens.

  The only way I can get the modem working again is to a full reboot.
  I think it happens if I disconnect the session 3G until I put into hibernation the R830.

  Technical details:
  Laptop TOSHIBA R830 PT321A - 01 K 002
  Program TOSHIBA Wireless Manager version CXP 901 4396/41 R4C01
  Ericsson f5521gw for Modem Broadband Mobile TOSHIBA 15/11/2012 7.2.3.4

  Is there anything else I can do to fix this?
  Maybe a newer driver (even beta)? Another thing to check/set up?

  Thanks in advance for any advice.

  See you soon,.
  Andrew.

  > I think it happens if I disconnect the session 3G until I put into hibernation the R830.

  I have no experience in using 3G after the laptop wakes up from hibernation mode, but in my opinion a good idea to close the connection before going into hibernation mode.
  Should test this several times in the line to check if it s the solution.

• How to call the taskflow or bean method after returning from operational-stream-call activity.

  I use JDev 11.1.2.4.0.

  Here is my scenario:

  A page contains a table with a button 'Add' called a popup.  The popup has controls to select data and save/Cancel buttons.  The Save button calls a managed bean method will add a line to the iterator in the table is built on.  I'd like the table to refresh the closure of the pop-up window.

  This is how I implemented it:

  I have taskflow1 that contains an activity view (page1).  Page 1, I have a button that calls managedBean1.method1 () who does a job and returns a result of 'showpopup '.  ShowPopup goes to a task-flows-call activity, called taskflow2.  Taskflow2 has a point of view (page 2, which is presented as a popup) activity and a return.   I want to call a method in managedBean1 to refresh the table once the popup is closed and I can't understand the right way to do it.

  After writing this I wonder if I should create the popup in the calling page rather than creating a separate workflow.  I started with a separate workflow because the popup is a quite complex.

  Thanks for help.

  Rudy

  Add a listener to return the button 'Add '. It will be called by ADF Faces upon return of the taskflow. For example:

  useWindow = "true" windowWidth = "600" windowHeight = "400".

  action = "#{MyBean.Method1} '"

  returnListener = "#{MyBean.myReturnListener}" / >

  And the bean method:

  public void myReturnListener (ReturnEvent returnEvent)

  {

  Do something, for example to update the table on the screen

  AdfFacesContext.getCurrentInstance () .addPartialTarget (myTable);

  }

  NB. don't forget to mark the taskflow call activity to 'run as dialog '.

  If you need the taskflow return result, you can get it in the earpiece to return via the method ReturnEvent.getReturnValue ().

  Dimitar

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• in 29.0.1 tabs will not go down after failover from true to false in 'browser.tabs.onTop' y at - it another way to get tabs on bottom?

  Help, please

  Comment by moderator

  Marked resolved thread of the solution. Anyone who reads my answer, please create a new thread, regardless of the situation by going to/issues/new

• Re: Y50 Windows 8: keyboard too slow response after returning from hibernation

  I also have this problem.

  Lenovo part No.: 59421845

  Model: 20378

  Purchase of: replacement/Exchange of Lenovo

  I wish I saw this thread until I did a factory restore. Well, at least its some comfort to know that I'm not the only one with this problem. I initially blamed the problem on my Razer Orochi 2013, but it turns out that was not the issue.

  And I agree a suitable fix is needed, the weather is a kind of BIOS or update the driver, but not a 3rd party work around. For a $1,200 + laptop, this should not be something that get just is swept under the rug with a 'temporary solution '.

  Please keep us updated on the status of this issue of Lenovo.

  EDIT: Using this message as the first in the thread for the purpose of climbing - Amy_Lenovo