Review of TortoiseSVN on front panel

Similar Questions

• Disabling the controls on the front panel

  Hello

  Currently, I am working on trying to disable/gray out between 10-20 controls on the front panel when you press a start button and then allowing them the end of the test. Currently I use the property nodes, all of which are connected to a constant of the State in which I want that works perfectly. My question is that there is another way other than having a bunch of knots of padding property to the top of my structure of the event. Ive read where people had Subvi, which has used references to make this same feature, but is there a way of doing things in the block diagram of my current VI? Thank you!

  Need references of your controls on the front panel, so this can be fast, because you can select more than one, and with a right click you create references.

  I have attached a version LV2010.

  Edit: another review:

  Must be created only once these references. Usually, it's comfortable group all the references in a cluster, use this thread through your entire code. This way you can just ungroup references to the actual location, you have to play with, put them in a table and use the above FOR loop to change their properties...

  Like this:

  

• PNG resize problem on front Panel (not stripped)

  I'm having a problem trying to develop custom controls and expand my GUI beyond the default options Labview.  I'm using a Visio flowchart to illustrate an industrial process.  I encountered a problem trying to add items such as indicators of tanks to the façade.  To do this, I'm importing Visio images, in photoshop and then saving them as png to maintain transparency.  The problem I have is that when I drop this file .png on the front panel and resize, Labview seems to be falling pixels and cut the edges of my image.  This seems to happen on which corner I resize the base.

  Example:

  Sample PNG bumped against a new front and then resized using the building in the container box.

  

  I have the same problems with the .gif files.  I have reviewed the various .png and .gif export options, and I don't see anything that I'm missing.  I don't have a problem with JPEG files, so it must be something related to transparency.  Is this a known problem or there at - it a labview option, I'm missing?  I am currenlty using Labview 2010 SP1.

  Given that I'm still in phase of my development of gui layout, I don't know the exact dimensions of all my items and I was hoping I'd be able to resize it as I'm going to and not to be completely locked in at custom controls.  Any idea would be appreciated.  I searched the forums, but all the questions that I could find were mostly programmatically resizing problems.

  One option, you can try exporting the EMF or WMF image. LV should be able to import that, and because it is a vector format, in my opinion, it should also resize correctly.

  Another alternative is to draw in BT itself, either decorations or control of image to draw programmatically (although you should be aware that this option can have performance issues).

• HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

  Hello

  I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

  could be - sleeve, ring and end cap (mono audio and microphone)

  or

  could be - sleeve, ring, ring and tip (stereo sound and microphone)

  Having read through the manuals and nothing is said on the type to use.

  Hello world

  Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

  Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

  Everything explained by the practice - but not the paperwork in the manuals.

  #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

  Thank you

  Son

• WANT 411c: MFP ENVY 411c lights on the front panel

  I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

  Hello

  That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

  The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

  They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

  As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

• Satellite L500D - what is that annoying red light on front panel?

  Hello

  I have my L500D the normal five system LEDs on the front panel of the base computer, where they are supposed to be. But then, to the left of these fires, there is that annoying red light, which is very distracting.

  But what is even more annoying than not one, + not a + manual owners I've read mentions none, + not even a hint. The manual mentions the other lights in their patterns, + but not this one. :-(

  Now, I'm assuming it's something really simple, and I publicly show how blind or stupid (or both) I really am. :-) But for love all holy, and before that I lose all of my hair, can someone tell me what is all simply as the red light?  :|

  And, while you're at it, maybe you can tell me how to turn it off! It would be a very unique experience for the moment. (B-)

  Don't get me wrong, I love my new L500D, my best investment by far and it goes like the wings and I write about a wacky ad jingle and broadcast around the world... If not for the boring red light. ;-)

  Help, please! (i)

  Hello

  I think you are talking about a wireless light located on the front left side of the computer. You can see here:

  http://laptops.Toshiba.com/laptops/satellite/L500

  Yes, it's a little boring, but you can turn it off by pressing Fn + F8 but in this case the wireless connection turns off. As for me, I use any wi - LAN, my knees is connected to the Internet by cable, and I never use outdoors.

  welcome them

• Presentation of connector to the front panel DC7700

  Hello

  Cannot find the necessary schema in the database to support HP I hope someone on the forum can direct me to the table of connector on the front panel of the system (format minitour Convertible) DC7700 Board; It is available to the pins that tells me where to connect the various switches, LEDs etc on a new case.

  Any advice welcome.

  Peter

  FOUND IT!... in a previous post of the forum [see '' info DC 7700 Convertible Minitowers (CMT) motherboard?']  Among other things - who - shows that I had not scanned the tech Ref guide closley enough!  ;~[

  And thank you "mdscole" to highlight the trail.

  ;~) !!

• e9180f: removal of the front panel? e9180f

  Hello, I need to clean my power swith (on the upper edge of the front panel) due to a spill of food products.  I have a side removed by removing a screw in the back and then dragging to the rear of the side panel. I don't remember if I already had the cabinet apart one more than this. The front panel can break, but I fear I will "break the BAD thing. I'm sure that WD - 40 or other cleaner used by switch electronic only should be OK. Thank you all for help.

  Please see HP document "remove the front cover HP Pavilion elite e9000, HPE-100 series desktop computers" for instructions on removal and replacement of the cover.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite A200-1N1: "Satellite" LED on the front panel does not light up

  Hi people!

  I noticed that my LED with the word "Satellite" on the front panel lights.

  You have all the hypotheses on the causes?

  Hi Maresha,

  The front 'logo' LED is enabled or disabled using a BIOS "Display front Logo" option that can be set on IT or OFF you need. Access your BIOS settings (F2 at startup) and check that this setting is set to 'ON '.

  Kind regards

• The front panel ThinkCentre M81 connector pinout

  I have a ThinkCentre M81. I am currently trying to put the guts of it in another case, so that I can add some more to it. I checked all the guides I can find on Lenovo's Support site and they show only the location of the connector and how repalce the façade.

  I try to connect the connections for the front panel ATX standard for my motherboard M81, which I'm having trouble with, reason for the connector of the Panel before Lenovo comes to be a big connector.

  I wonder if this information is a resource that I missed somewhere, or if I have to trace the wires.

  It is not your model, but maybe they are similar:

  http://forums.Lenovo.com/T5/ThinkCentre-A-E-M-S-series/ThinkCentre-A60-front-panels-power-audio-and-...

• OR scope Soft Front Panel fails to load

  Hello

  I use the scope Soft Front Panel OR with my USB NI 5132 for some time successfully. However, recently it has stopped working completely - seems to load a bit then fails before you even open the screen. The same thing happens in MAX I did all the updates critical, uninstalled then reinstalled NI Scope, uninstalled Labview (the only thing I had changed after the last time, I know that it worked successfully) and checked the nitaglv.dll library was in the right place according to this post: http://digital.ni.com/public.nsf/allkb/63739991438EC593862579C6007301EC

  So far nothing's worked. I NI SCOPE 4.0 and NI-VISA 5.3.0 installed, and the computer could see successfully the digitizer USB 5132 Max after the relocation OR scope, well that the flexible façade does not always load and making the Panel test Max also does not.

  I have attached a picture of the screen to load before it disappears so that could provide clues.

  Suggestions?

  
  

• OR DC Soft Front Panel, minorbug, small bug with the PXI-4110

  Hello

  The NI DC Soft Front Panel V14.0, with the PXI-4110, scrolling to negative tension, works as expected to-10V, but then returns to 0. If we change from - 1V procedure, it goes...-8-9,-10, -1, -2... instead of-8-9,-10, -11, -12...

  Everything about her, a simple thing that I miss is a switch for all three voltages.

  (Also, IMO, it would be logical for negative tensions with the arrow pointing down, not more).

  My 2 c

  Hello Janaf,

  I completely agree with two of your statements, I tabled a report of corrective measures that you can monitor in the next versions of DCPower to see if this is fixed with the FPS. CAR number: 512257

  I've added notes that only manual insertion of numbers - less than 10 works and that it was not logical to use arrow increment or upward arrow to reduce the output voltage.

• OR SWITCH Soft Front Panel

  Hello

  I have a few questions in the following way:

  1. After installing the Switch Executive 3.6 (evaluation software), I have very large window for OR Soft Front Panel SWITCH to cover all 4 monitors. It is difficult to see. Do I have to uninstall 3.6 Executive switch (software evaluation)? We don't need that much. Is it safe to uninstall?

  Could you give me the solutuion to configure on the previous setting the Soft Front Panel, released only to a single monitor.

  2. what the Panel "pxi-2720" test should be at MAX? If I click on the test Panel, 'Switch Panel Soft' appears with the topology - '2720-independent? It looks like swich instead of test programmable resistance. Is - this Panel good criterion for pxi-2720?

  3. for NI PXI 2571, I SH200LFH-4xDB50F-C cable to connect to the terminals and tested the switches. I found the NO0 (P1 pin2) - COM0 (P1 pin1) connection is not working while others work. That is reserved by something else? I have test by exchanging terminal blocks, but the result was the same.

  I'm waiting for your answers.

  Thank you

  Insuk

  Thank you!!

• Can I programmatically change the default property to create for all elements of the front panel?

  Can I programmatically change the default property to create for all elements of the front panel?

  I need to make the logout button, when click on, takes care of all the default values of my fron Panel.

  There is no way to programmatically call the functionality of an editor 'Use default' or 'Load Default'. To do it yourself, you will need to write your default values for each control explicitly in the diagram, when the user press the logout button.

• Usability is NOR-SCOPE Soft Front Panel for the PXI-5154?

  I am plans to use the PXI-5154 with his NO-SCOPE Soft Front Panel in a product to test instrumentation. Our past experience, our users need an on-board scope that is easy to use which does not load the CPU. In most cases the scope will be used to check a transitional type of pulses. So, the amplitudes and rise times are essential to ensure compliance with ISO standards. The ability to capture, store and recall traces of reports is important, as well as the ability to perform simple and reproducible follow-up measures. We don't expect our users to have to program the scope; "give me the waveform.

  Does anyone have any comments on the usability of the NOR-SCOPE Soft Front Panel? How to compare with other soft scopes?

  Hello!

  The scope Soft Front Panel is very user friendly and able to load/save waveforms, Load/Save settings and make the scalar measures.  I've attached a screenshot of what the front soft worn looks as well as a link to a help document on the high speed digitizer HELP.  Information on the scope Soft Front Panel lies in this document and can be found under the tab content in the configuration tree (NI - Scope Soft Front Panel help).

  Help of digitizer OR high speed

  http://digital.NI.com/manuals.nsf/WebSearch/2123F564C6DE7B27862574DE006915DE