Ripple: md5 :(

Similar Questions

• get the ripple effect when scrolling in firefox on macbook pro

  only does not on safari and firefox

  success! Since updated to 14 now ripple disappeared

• How can I control the list of the available in the message SSL Client Hello cipher suites? I want to ban the MD5 and RC4.

  How can I control the list of the available in the message SSL Client Hello cipher suites?
  I want to limit my browser to negotiate the cipher suites fort. I would like to prohibit, MD5 and RC4.

  Set the SSL3 preferences related to false on the subject: config page (filter: security.ssl3.).

  • http://KB.mozillazine.org/about:config

• Firefox publishes a MD5 or SHA1 hash for me to check my download?

  For security reasons, I want to be able to check my download of Firefox using the MD5 or SHA1 hash.

  Firefox 3.6.13 you can access it here - http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.13/

• Satellite Pro L850-1DV: manual driver installation repair md5 command

  Technical support could please provide some details on the correct order to install the downloaded drivers from Toshiba for a Satellite Pro L850-1DV for Windows 7?

  Also, is there another method to install the drivers to download and unzip the 44 separate drivers?
  I remember there are 47 drivers that are installed during a repair recovery partition but 44 available for download.

  I guess things like the creative software recovery media are not included in these downloaded drivers, or something else that does not included?
  I would like to try an install of Windows 7 media.

  I could also ask if anyone with a L850-1DV and appropriate tools, such as a Linux installation might be able to tell me the sum of md5 checksum for the recovery hard disk partition. That would be fantastic!

  Best wishes,
  David

  Try this:

  Windows 7 SP1 of Win7 64 bit
  SW 9.3.0.1020 Chipset installation utility
  Intel Management Engine Interface 8.0.1.1399
  Driver Intel 8.15.10.2639
  Driver Intel Rapid Storage Technology 11.0.0.1032
  Realtek Audio Driver 6.0.1.6559
  ATI HDMI Audio Driver 7.12.0.7704
  HD 1.12.0300 SRS Premium Sound Technology
  Synaptics Touch Pad Driver 15.3.38.2
  Realtek LAN Driver 7.48.823.2011
  Atheros Wireless LAN Driver 9.2.0.474
  Atheros Bluetooth Driver Package v1.0.12 Filter
  Battery Bluetooth for Windows by Toshiba v9.00.00
  Bluetooth Monitor v4.08
  Intel USB3.0 Driver 1.0.1.209
  Realtek 6.1.7601.30130 card reader
  TOSHIBA value added package 1.6.0021.640203
  TOSHIBA Sleep 1.4.0022.000104 utility
  TOSHIBA resolution + plug-in for Windows Media Player 1.1.2004
  TOSHIBA Media Controller 1.0.87.5
  TOSHIBA Media Controller plugin 1.0.7.7
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 20
  TOSHIBA Web Camera Application V2.0.3.33

• Satellite Pro L450D - light ripple effect on external monitor

  I hope someone can help me. You just bought a new Pro L450D of Satellite and also bought a screen separate LCD (Viewsonic) to use with the laptop.

  When you use the lcd screen there are a slight ripple effect on the bottom when you look at the screen that is not pleasing to the eyes. This is not the screen that has a problem, as I have tried on other portable PCs and its fine. Have also tried another screen on the laptop and the same problem occurs. However, this problem does not the screen of the laptop itself.

  Anyone have an idea how I can solve this problem.

  Thank you

  Sam

  Hi Ndev,

  Have you tried another cable for your external monitor and what (cable) connection you use exactly?

  Are you running the factory settings or you have installed your own OS?

  First of all, I would recommend updating the display driver and BIOS. The two you can download on the Toshiba site.

• Re: Satellite A200 - 1 GB - strange ripples on the external LCD

  H,

  When I try to connect my laptop to my Samsung 32 "LCD with VGA, I have strange ripples on the screen.
  I tried to change any settings in my computer and my TV and it's still there.

  How can I fix?
  It is almost impossible to look like that.

  Thank you.

  Have you tested the laptop with other external monitors?
  You should do this to make sure that it is not a matter of LCD

  I also recommend checking if those ripples are visible using different screen resolutions!

  Last but not least an update of the graphics card driver would also be useful.

• 15 - ax004na: brief ripple effect on the screen - Misty

  Hello

  Initially, noticed that when returning in the Office of my browser, it is a ripple effect very briefly on the screen. It looks like an interference more than anything else that's not office real ripple, its more about the top of the image; foggy lines. I turned off the wireless mouse in case it was there. haven't tried the wifi yet - Im hoping that its not something serious involving the graphics card.

  More noticeable on light background colors even when jumping to a new tab, moving between applications.

  Wonder if theres a problem with the screen or simply a display configuration I can change to try to prevent this.

  New laptop, only a few weeks.

  Graphics card: NVIDIA® GeForce® GTX 950 M (2 GB of dedicated GDDR5 memory)

  Thanks for your help.

  @brutaledilusso

  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you

  If I understand correctly, the screen is blurred lines and gets an effect of brief training at certain times,

  I recommend that you check whether the same appears on the BIOS screen (restart the computer and press F10 to access BIOS)

  This would confirm if it is a hardware failure or a problem with the graphics card drivers... so we can reinstall and update drivers to resolve the problem.

  If the problem persists on the BIOS as well, please try with another monitor/TV to identify if it's the LCD or the mother/video card failure,

  I would appreciate it if you could try the above steps and let me know so that I can help further.

  Kind regards

• SMU-4304 causing the ripple on the input signal?

  I have an SMU-1082 chassis that contains a high-6341 and a PXI-4304 module.  To check my code, I have connected the analog input (channel 0) of the 4304 to the digital output (PFI 12) of the 6341.  My program VI shows a ripple of Vpp 0.2 on the analog input that I'm not using a scope.

  The wiring is SMU-6341 [12 PFI, DGND]-> SCB - 68 a,--> TB-4304 [AI0 +, -]-> SMU-4304

  I have attached photos of the verses reach the graphical VI.  The scope is the AI0 + AI0-terminals and the TB-4304.

  Y at - it a supplement on the ground that I should use, or is - this normal for the-4304 to add the ripple?

  Thank you

  Ron

  Short answer, is that there is nothing wrong with what you see.

  You have connected a digital output signal low impedance to a digitizer analog high input impedance. Since a digital signal is essentially a square of variable in time wave and square wave have edges of transition that contain information of very high frequency, you will almost always see a form of "ripple" (see animation synthesis of fourier of a signal square from this Wikipedia page ). Thus, a digital output signal is more concerned with the synchronization and the upgrade to be a square wave perfect.

  In addition, you can see additional "ripple" because of differences between the SMU-4304 and the noculars that you have demonstrated. the noculars can be a combination of a bandwidth of upper entrance (which can come from various sources like low sampling frequency on the 4304 which would result in a higher frequency of information recorded by the noculars for smoother transitions to research) and, possibly, a lower input impedance (causing less, if any, the reflection of signal which would cause the ringing of the signal).

• Version labview6 MD5

  Hello

  I am lookiing for an algorithm MD5 function on an old
  LabVIEW (6.1) machine.
  I found in the examples of the forum a digest MD5 library
  but it's for labview 7.
  Please could someone convert to previous version?

  I thank in advance
  F

  
  

• How can I individual files contained in a llb file md5 sum?

  How can I individual files contained in a llb file md5 sum?

  I'll assume you know how to get the value of MD5. If it isn't... http://forums.NI.com/T5/LabVIEW/MD5/m-p/1067558

  The LLB acts as a container. So, you will need to extract the files of the LLB and save them as individual files, so that you can calculate the MD5 checkusm for each file. LabVIEW is a built-in LLB Manager which can be used to convert a LAW degree to a directory of files.

  Note: If you use the LLB to store your screws during development, it is a BAD idea (control of source code, a file corruption problems corrupts all LLB, nightmare of development distributed, etc...). LLBs must be used for the distribution of the code, and if you need a MD5 for that, you could just provide the MD5 for the Bachelor of LAW, rather than the MD5 for each file.

• Unable to use the service Windows Server 2012 EAP - MD5

  Hello

  I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

  Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

  I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

  Can you know me how to provide the password in 2012.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Sha1sum/MD5 for test of Windows Server 2012 R2 Essentials

  I try to install the above https://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-r2-essentials version, file name

  9600.16384.WINBLUE_RTM.130821 - 1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5. ISO.

  When attatching the DVD in virtual box, I make mistakes (below for reference) but I can't seem to find a sha1sum or md5 of this file, anyone can provide one?

  VirtualBox errors:

  Unable to get the storage format of the middle ' / Users/rparks/Downloads/9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5. ISO' (VERR_NOT_SUPPORTED).

  Result code:	VBOX_E_IPRT_ERROR (0X80BB0005)
  Component:	MediumWrap
  Interface:	IMedium {4afe423b-43e0-e9d0-82e8-ceb307940dda}
  Called:	IVirtualBox {0169423f-46b4-cde9-91af-1e9d5b6cd945}
  Called RC:	VBOX_E_OBJECT_NOT_FOUND (0X80BB0001)

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The FCIV tool - > y at - it a database of reference available to an official MS online secure website where we could ask if a MD5 / SHA-1 hash is safe?

  Hello

  In other words...

  (1) this is the FCIV tool I'm talking

  http://support.Microsoft.com/kb/841290

  (2) I would like to know if there is a way to address the MD5/SHA-1 calculated hash and check if the value found is in line with official software developed by Microsoft...

  For example: if I run the FCIV tool with "c:\program files\windows media player\wmpnetwk.exe", I get MD5 and SHA-1 suite of values...

  //
  File Checksum Integrity Verifier version 2.05.
  //
  MD5                             SHA-1
  -------------------------------------------------------------------------
  a9f3bfc9345f49614d5859ec95b9e994 64638c3ff08eecd62e2b24708cf5b5f111c05e3d c:\program files\windows media player\wmpnetwk.exe

  Is it an online service available from MS that helps me to compare at least a pair of ' MD5/path' or 'SHA-1/Path', then to get a positive or negative test relating to this application.

  By good I mean, I can trust without doubt that it is a true software of MS and not a MALWARE software...

  Eager to hear feedback on this...

  Best regards.

  Hello

  The readme file contains more examples use fciv.exe, including using different algorithms and generate hash values for files of the entire tree.

  In the link your provided tools, he States:warning the Microsoft File Checksum Integrity check (FCIV) utility is an unsupported command-line utility that calculates the MD5 or SHA1 cryptographic hashes for files. Microsoft provides no support for this utility. Use this utility at your own risk. Product Support Services Microsoft (PSS) cannot answer the questions about the File Checksum Integrity Verifier utility."

  Try to repost your questions to the TechNet Forum for THIS professional assistance.

  How to use the Article on the utility

  http://www.ComputerWeekly.com/tip/how-to-use-the-Microsoft-FCIV-command-line-checksum-tool

  Good luck!

• Monitor question: is constant ripple read something difficult - if this isn't a problem with my graphics card, what else could he be >

  It is difficult to describe. I run XP and later that yesterday to fuel my system, I noticed that the monitor was something different for the first time - the perifrial on my hp2011x monitor field had developed these mirco-wave that makes viewing anything a bit difficult. Thinking that it was temporary, I just moved everything I was working on the center of the screen - which remained essentially stable. After having finished up last night, I turned off.

  Today, however, it's another story. Now, the whole screen was made in such a way that everything is now visually corrugated - which seems that ripples are moving up and down in a horizontal jet across the entire screen. And this annoying effect is much more important, making it difficult for the eye to read anything for a long time.

  What could be the problem here?
  Thinking it might be a problem of monitor, I borrowed a friends monitor - exactly like mine, but the effect continues.
  If not, a sign that the graphics card is out, what else could be the problem?

  Thanks for your help.

  Hello

  You think that this problem could be related to the graphics card.

  Method 1: You can see the steps mentioned in the article below

  Resources for troubleshooting problems in Windows XP
  http://support.Microsoft.com/kb/307960

  Method 2: Start your computer in VGA mode, then check if the display problem persists. To do this, follow the steps mentioned in the link below

  Activate the Mode of VGA (Video Graphics Array)
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_overview.mspx?mfr=true

  If the problem persists, you can communicate with the computer or the adpater manufacturer to address this display problem.