RMAN: Backups not exipring after the window of redundancy.

Hello

I meet backup sbt_tape and the use of the slot block:

run{
ALLOCATE CHANNEL C1 TYPE SBT_TAPE PARMS='SBT_LIBRARY=/u01/app/oracle/product/11.2.0.3/db1/lib/libddobk.so,
ENV=(STORAGE_UNIT=CH2-nwtdb-Oracle, BACKUP_HOST=172.28.136.50, ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db1)';
ALLOCATE CHANNEL C2 TYPE SBT_TAPE PARMS='SBT_LIBRARY=/u01/app/oracle/product/11.2.0.3/db1/lib/libddobk.so,
ENV=(STORAGE_UNIT=CH2-nwtdb-Oracle, BACKUP_HOST=172.28.136.50, ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db1)';
ALLOCATE CHANNEL C3 TYPE SBT_TAPE PARMS='SBT_LIBRARY=/u01/app/oracle/product/11.2.0.3/db1/lib/libddobk.so,
ENV=(STORAGE_UNIT=CH2-nwtdb-Oracle, BACKUP_HOST=172.28.136.50, ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db1)';
ALLOCATE CHANNEL C4 TYPE SBT_TAPE PARMS='SBT_LIBRARY=/u01/app/oracle/product/11.2.0.3/db1/lib/libddobk.so,
ENV=(STORAGE_UNIT=CH2-nwtdb-Oracle, BACKUP_HOST=172.28.136.50, ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db1)';
backup incremental level 0 database filesperset=1 format '%d_L0_DF%f_%T_%u.dbf' tag 'DB_L0_DF_#_DT_UNQNO';
backup current controlfile format '%d_L0_CF_%T_%u.ctl' tag 'DB_L0_CF_DT_UNQNO';
backup incremental level 0 archivelog all filesperset=1 format '%d_L0_AL_%h_%e_%T_%u.arc' tag 'DB_L0_ARC#_DT_UNQNO';
crosscheck backup of database;
crosscheck backup of archivelog all;
delete noprompt expired backup of database;
delete noprompt expired backup of archivelog all;
}

My backups work perfectly, but for some reason, my backups expire even though my redudancy is set to 7 days.

In my dest backup, I have backups as old as March 13, which should have been expired since a long time back.

Any ideas what could be wrong?

RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters for database with db_unique_name IWTPR are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO 'SBT_TAPE';
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 4 BACKUP TYPE TO COMPRESSED BACKUPSET;
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE 'SBT_TAPE' TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE 'SBT_TAPE' TO 1;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' PARMS  'SBT_LIBRARY=/u01/app/oracle/product/11.2.0.3/db1/lib/libddobk.so, ENV=(STORAGE_UNIT=CH2-nwtdb-Oracle, BACKUP_HOST=172.28.136.50, ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db1)';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE;
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '+IWTPRFRA/IWTPR/snapcf_IWTPR.f';
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '+IWTPRFRA/iwtpr/snapcf_iwtpr.f';

Thanks in advance,

aBBy.

Details of env: RAC 4 node cluster running 11.2.0.3.4 GI/RDBMS on RHEL 5. 6

AB007 wrote:

Hello

I meet backup sbt_tape and the use of the slot block:

  1. Run {}
  2. ALLOCATE CHANNELS C1 TYPE SBT_TAPE PARMS='SBT_LIBRARY=/u01/app/oracle/product/11.2.0.3/db1/lib/libddobk.so.
  3. ENV = (STORAGE_UNIT = CH2-nwtdb-Oracle, BACKUP_HOST = 172.28.136.50, ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db1)';
  4. ALLOCATE channel C2 TYPE SBT_TAPE PARMS='SBT_LIBRARY=/u01/app/oracle/product/11.2.0.3/db1/lib/libddobk.so,
  5. ENV = (STORAGE_UNIT = CH2-nwtdb-Oracle, BACKUP_HOST = 172.28.136.50, ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db1)';
  6. ALLOCATE CHANNELS C3 TYPE SBT_TAPE PARMS='SBT_LIBRARY=/u01/app/oracle/product/11.2.0.3/db1/lib/libddobk.so.
  7. ENV = (STORAGE_UNIT = CH2-nwtdb-Oracle, BACKUP_HOST = 172.28.136.50, ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db1)';
  8. ALLOCATE CHANNELS C4 TYPE SBT_TAPE PARMS='SBT_LIBRARY=/u01/app/oracle/product/11.2.0.3/db1/lib/libddobk.so.
  9. ENV = (STORAGE_UNIT = CH2-nwtdb-Oracle, BACKUP_HOST = 172.28.136.50, ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db1)';
  10. filesperset database backup incremental level 0 = 1 format '% d_L0_DF%f_%T_%u.dbf' tag "DB_L0_DF_ #_DT_UNQNO";
  11. backup current controlfile '% d_L0_CF_%T_%u.ctl' format tag "DB_L0_CF_DT_UNQNO".
  12. incremental backup of level 0 archivelog all filesperset = 1 format '% d_L0_AL_%h_%e_%T_%u.arc' tag "DB_L0_ARC #_DT_UNQNO";
  13. cross-checking of backup of database;
  14. backup duplication of the archivelog all;
  15. delete noprompt expired backup of database;
  16. delete expired backup noprompt to archivelog all;
  17. }

My backups work perfectly, but for some reason, my backups expire even though my redudancy is set to 7 days.

In my dest backup, I have backups as old as March 13, which should have been expired since a long time back.

Any ideas what could be wrong?

  1. RMAN > show all.
  2. using the control file of the target instead of recovery catalog database
  3. RMAN settings for database with db_unique_name IWTPR are:
  4. CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  5. CONFIGURE BACKUP OPTIMIZATION
  6. CONFIGURE THE TYPE OF DEFAULT DEVICE TO 'SBT_TAPE ';
  7. CONFIGURE CONTROLFILE AUTOBACKUP
  8. CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  9. CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO "%F" # by default
  10. SET UP THE DEVICE TYPE DISK PARALLELISM 4 TYPE OF BACKUP TO COMPRESSED BACKUPSET;
  11. SET UP THE DEVICE TYPE 'SBT_TAPE' PARALLELISM 4 TYPE OF BACKUP BACKUPSET.
  12. CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1;
  13. CONFIGURE BACKUP COPIES OF DATA FILE FOR THE 'SBT_TAPE' UNIT 1;
  14. CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1;
  15. CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE 'SBT_TAPE' 1;
  16. CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' PARMS 'SBT_LIBRARY=/u01/app/oracle/product/11.2.0.3/db1/lib/libddobk.so, ENV is (STORAGE_UNIT = CH2-nwtdb-Oracle, BACKUP_HOST = 172.28.136.50, ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db1)';
  17. CONFIGURE MAXSETSIZE TO UNLIMITED;
  18. CONFIGURE THE DATABASE ENCRYPTION
  19. CONFIGURE THE ENCRYPTION ALGORITHM "AES128";
  20. CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD;
  21. CONFIGURE THE NONE ARCHIVELOG DELETION POLICY;
  22. CONFIGURE the SNAPSHOT CONTROLFILE NAME to "+ IWTPRFRA/IWTPR/snapcf_IWTPR.f";
  23. CONFIGURE the SNAPSHOT CONTROLFILE NAME to "+ IWTPRFRA/iwtpr/snapcf_iwtpr.f";

Thanks in advance,

aBBy.

Details of env: RAC 4 node cluster running 11.2.0.3.4 GI/RDBMS on RHEL 5. 6

You are confusing "expired" with "obsolete".

When a backupset is created, an account of which is placed in the control file.

If you backup ' overlap ', rman checks these records against reaility.  If no backup turns out have disappeared, his file is marked as "expired".  That follow-up with a 'delete expired backup', and missing backups (expired) records will be deleted from the repository.

What you want is "delete obsolete.  Which will remove any backup that is no longer necessary to enforce the retention period.

BTW, "redundancy" and "x days" are mutually exclusive.

Tags: Database

Similar Questions

  • computer does not start after the Windows XP logo window

    Windows xp home edition
    service pack 2
    Dell inspiron 1501

    1. computer does not start after the Windows XP logo window
    2 works well in safe mode, even connect to the external monitor
    3. I reinstalled xp many times, problem stil exist.

    All the answers?

    Hi dhanushm,

    1. What happens after the Windows logo screen?
    2. You receive an error message?
    3. You have security software installed on the computer?
    4. Have you performed an installation clean Windows XP and even after that this problem exists?

    Method 1

    As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
    4. When you are prompted, click restart to restart the computer.

    Method 2

    If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

    After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

    http://support.Microsoft.com/kb/318027

  • Z400 disks with EFI partition not mounting after the Windows 7 Pro upgrade

    HP z400: after a repair/upgrade to sp1 of Windows 7 Pro (64), no matter what external disk with an EFI partition is not installed.  Player will be present in the BIOS and the management of drive, but without a letter. Cannot assign a drive letter.  All other discs mount correctly.  Disks with EFI partition will mount on other PCs.  All the drivers seem to be current and fuctional.

    I thought about it... after two weeks of puzzle, I finally found the cause.

    I run MacDrive 8 so I can play discs with HFS + formatting.  This program should be completely uninstalled and reinstalled after the upgrade.  I had turned it off before the upgrade, but it takes more than that.  Everything works now as expected.

    But wouldn't be INCE if Windows reads discs mac natively?

  • The Internet is not accessible after the Windows Recovery virus eliminated

    Original title: Recovery Windows Virus eliminated but now no internet... what the

    I got the Windows Recovery virus and my son has deleted successfully and that he found all the files and I have the office back.  I can connect to the internet if I use another laptop but I can't connect using the infected computer.  I have contacted my provider, but they can help as I have connection so there is no problem.  I'm currently on a laptop, attached to my modem, so I know it's working.  When I use my computer and try to connect it comes up saying "Internet explorer cannot display the webpage".  There is an option to diagnose connection problems, but it does not work for me because I have a connection.  Y at - it is something I need to fix on my original computer to allow the signal through it to say: a registry or something.

    If you see stuff like this (after got rid of the malware):

    Internet Explorer cannot display this webpage
       
    The most likely causes:
    You are not connected to the Internet.
    The Web site encounters problems.
    There could be a typing error in the address.

    We will check your network connection properties.

    Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.
     
    Click Start, run and enter in the box:

    Inetcpl.cpl

    Click OK to launch the Internet Properties Control Panel, choose connections, LAN settings.

    Or, in Internet Explorer click on tools, Options, connections, LAN settings.

    These settings control your Internet access for all browsers.

    (If you make settings, write them down so you can undo changes if you must)

    On most environments, not independent, there will be check automatically detect settings and
    the other boxes are (as Proxy Server) is disabled.

    Automatically detect the setting checked =
    Use the automatic configuration script = unchecked
    Use a proxy server for your LAN = not checked

    Make changes, then click OK, OK to save the settings.

    Check your settings for how your network adapter gets its IP and DNS settings.  Most home page
    systems, these parameters must be defined for the system will get the settings automatically.

    If you have another system on your network that works, you can compare these settings with the
    parameters of the system that is not a work and make adjustments.

    Click Start, settings, Control Panel, network connections, and then select your current network connection.

    On the general tab, click Properties.

    In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

    In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings
    automatically.  Select the following two options:

    Obtain an IP address automatically
    Get a DNS server address automatically

    The rest of the options on the screen should then be grayed out/not available.

    Make changes, then click OK, OK to save the settings.

    Restart your computer and test your connection.

    If that is fixed, follow these steps:

    Click Start, settings, Control Panel, network connections, and then select your current network connection.

    On the general tab, click Properties. In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties. Advanced. There should be a tab DNS. Please make sure that the following options are selected:

    Dash in add primary and connection specific dns suffixes and an add parents of the primary dns suffix suffixes and also a check tick to save these connections addresses in DNS.

    On the check tab VICTORIES which allow you to search LMHOSTS is checked and use the default setting for netbios. Now OK out of all these windows. If you have changed a
    These settings please let us know.

  • ITunes does not start after the installation of Windows 10

    ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

    Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

    Solution, according to this link, is:

    If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.

    After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.
    I reinstalled the latest firefox, still cannot access Internet from Firefox.
    Microsoft is ridiculous?

    1. Run cmd.exe as administrator
    2. Type "netsh winsock reset" and then press enter
    3. Restart the PC

  • Satellite P855 - function keys do not work after the upgrade to Windows 10

    Function keys do not work after the upgrade to Windows 10
    I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
    Anyone know when and if it will be available?
    Thank you

    I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

  • Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

    I installed 10 64-bit Windows (original was Windows 7 64-Bit)

    My FN keys do not work after the installation of Windows 10.

    There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
    Do you know any help

    Hello

    I think that your model of laptop is not possible to Win10.
    Check it please https://forum.toshiba.eu/showthread...mation-website

  • HP ENVY dv6 Notebook PC: press the / STOP the envy of hp dv6 7204se do not work after the update of windows 10

    the power button of my hp dv6 7204se envy key do not work after the update of windows 10

    any help on this please?

    .

  • Windows does not start after the installation of NVIDIA GeForce FX 5500. Help!

    Before, I had a Sparkle GeForce2 MX400 64 MB AGP Graphics Card with the installed driver. I have not had any problems with him, but I need to upgrade, so I got a NVIDIA Inno3D GeForce FX5500 256 MB 128 bit AGP graphics card. So, the thing is, before I installed the driver for it, the computer was working fine, but of course I can't play games. So I downloaded the driver from NVIDIA (175,19 I think), and I installed it in safe mode to avoid any conflict with my antivirus. The installation is complete, and the system restarted. Everything was going well until after the windows logo (by the way, I'm on Windows XP Pro SP3), when the system crashed all of a sudden. The screen turns off, the unit of the system itself was still on, but it does not. I tried enabling / disabling the NumLock, CapsLock button to check if there is an answer, but I have nothing. I manually turned the computer off, waited for about 3 minutes, the market again, but again, the system crashes after the screen Logo of Windows XP. I started in SafeMode again, uninstalled the NVIDIA driver, restart the system and everything went back to normal. I retried my old 64 MB AGP card and it still works fine. I really need to install the driver to make the most of my 256 MB graphics card. Can anyone help please?
    So far I did the following:
    1. re-installed Windows XP
    2 re-installed the driver NVIDIA about 5 times already.
    3. update all the drivers of my motherboard.
    4. completely removed all traces of NVIDIA using Drive Cleaner and put it back.
    5 installed DirectX 9.0.
    Still, none of them worked. Help!

    Here are my computer specs:
    OS: Windows XP Pro SP3
    Motherboard: ECS 661FX-M rev 1. 0 b
    Processor: Pentium 4 2.4 GHz
    RAM: 768 MB
    HARD drive: 1x80GB IDE slave, 1x20GB IDE Master
    BIOS: Phoenix Tech, LTD 6.00 PG 01/18/2006 v2.2
    Antivirus: Avast free Antivirus v6

    Any help would be appreciated. Thank you! :)

    PS: I know that my computer is really old. But please don't advise me to upgrade the entire computer or something like that. I can't afford to buy right now a new. Thank you.

    Hello

    I suggest to start the computer in safe mode and check if you can start.
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    If you are able to start the computer in safe mode, then go to Device Manager and uninstall the drivers for the graphics card and restart the computer.

    If it boots fine in normal mode and then try to install the latest drivers in normal mode and check if that helps.

    Check if that helps.

  • Want to dv6 Notebook PC 7226nr: scan fingerprint hp simplepass does not work after the upgrade to windows 10

    My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10.  Is there a fix for this yet?

    I thought about it.  The upgrade to Windows apparently damaged 10 HP SimplePass software.  Once I uninstalled and reloaded the program, everything started working.

  • Automatic updates do not work after the repair of the windows XP operating system

    automatic updates of Windows do not work after the repair of the operating system

    Hello

    What exactly is the error message? Updates download? Are they trying to install but do not?

    Here are some common steps that you can take to solve the problem:

    http://support.Microsoft.com/kb/883614

  • Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

    I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

    Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

    My system:

    Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

    * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

    Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

    I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

    I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

    http://www.Broadcom.com/support/Bluetooth/update.php

    I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

    On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

    Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

    Thank you for your help.

    Support FREE from Microsoft for SP2:

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

    Microsoft free support for Vista SP2 at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

    No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

    Any help will be much appreciated. Thank you.

    As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

    Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

  • VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7.

    I work in the field environment.
    Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).
    but it runs on the Windows XP computer.
    For example:-Inventory.exe (work), Sales.exe (does not work)
    Help, please.

    Hello

    I suggest you to ask your question at the following link.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

    I would also ask you to contact your IT Department for further explanations.

Maybe you are looking for