RMAN cloning daily of the CARS to the NON-RAC

Similar Questions

• Add a new instance to the NON-RAC database?

  I could create a new instance to the non-rac database?
  
  I tried to use dbca to create the second instance, but I read, help, that is not possible.
  
  There is no way to create the second instance in a single database? (No. - CARS, no. - ASM, just a normal database)
  
  Thanks in advance.

  Instance = process and memory
  Basis of data = all data files.

  For a database no CARS, there is a one-to-one mapping between the instance and database.

  If you don't want to use an existing database to store the new patterns, you need to create a new database.

• The CSSD does not start automatically on the Non-RAC - AIX 5 L

  Hi all
  
  Database: Oracle 10.2.0.4
  AIX 5.3 TL 10 OS
  
  I am facing a problem with the Non-RAC/Clusterware CSSD.
  
  When we restarted the CSSD service server does not start automatically, and there is no relevant messages in the log files of the CSSD.
  
  Run 'localconfig reset $ORACLE_HOME', to run but does not start the CSSD.
  
  Running 'start /etc/init.cssd' - does not work, nothing happens when you throw
  
  I manually ran "file/etc / init.cssd to run" and the start of the CSSD (ossd.bin) service without errors.
  
  No error on errpt in AIX.
  
  I opened a SR, but I'm waiting for response from the Oracle.

  Hello

  I think that this problem is not with Oracle, but in AIX.

  It may be that a process that starts at the start is the other process. You need to identify what application/process.

  Check the process in inittab who are already active and which are inactive, they must be active.

  A clue: is very common process that is launched in standby mode keep the boot server.

  wait
  When the init command enters the run level that matches the entry's run level,
  start the process and wait for its termination.
  All subsequent reads of the /etc/inittab file while the init
  command is in the same run level will cause the init command to ignore this entry.
  

  http://publib.Boulder.IBM.com/InfoCenter/AIX/V6R1/index.jsp?topic=/com.IBM.AIX.files/doc/aixfiles/inittab.htm

  Kind regards
  Levi Pereira

• RMAN cloning of the CARS to the Non-RAC

  Hi gurus,

  I had cloned successfully my DB of RAC to Non-RAC via the RMAN. Below is the configuration

  RAC

  -2 nodes

  -GR 11, 2 (Compatible 11.0.1.6 according to the needs of the Application)

  -ASM (2 starts DATA and FRA)

  -OS RHEL 6.3

  Non - RAC

  -node 1

  -Stand alone11gR2 (Compatible 11.0.1.6 according to the needs of the Application)

  -ASM (2 starts DATA and FRA)

  -OS RHEL 6.3

  My approach was to clone DB and then change SID with utility nest. My understanding is that utility nest will also replace file ASM paths of CRAMPRD to CRAMSIT, but that has not happened.

  So question is when I'm checking my paths on CRAMSIT he still refelect CRAMPRD eg - + DATA1/CRAMPRD. Is it possible to rename this directory in ASM railways so that it should reflect my SID.

  Kind regards

  Nikhil Mehta.

  No, NEST would change the paths of the DSO.

  I assume that you have set the ORACLE_SID CRAMSIT on the server not CARS before the restoration.

  What you should have done is to put DB_UNIQUE_NAME = "CRAMSIT" (even with DB_NAME = "CRAMPRD") on the server not CARS before the restoration.  Oracle would have used the DB_UNIQUE_NAME to set the path of the ASM (note that when restoring, it would have shown ' restoration to + DATA1/CRAMPRD "but would have been catering to '+ DATA1/CRAMSIT').

  You can now use Oracle Support Note

  How to rename/move a data file in the same [564993.1 ID] ASM diskgroup

  to rename the paths to the DSO.

  Hemant K Collette

• Cloning of Oracle EBS - RAC to the Non-RAC on windows 2008

  Please note that my Client is running Oracle eBusiness suit R12.1.1 + 11.2.0.2 on Windows
  
  Server 2008R2 on RAC + ASM.
  
  I was asked to perform the Clonning of Production Test of RAC environment at no
  
  RAC?
  
  I went through the id of note certified RAC scenarios for the E-Business Suite cloning [783188.1 ID] which
  
  says that Oracle E-Business suit R12.1.1 is not supported for RAC RAC or RAC to no RAC Clonning?
  
  Please tell us if the Clonning is possible to environment CARS not RAC on Windows 2008 R2 for
  
  R12.1.1 + 11.2.0.2?
  
  What is the possible risk if I go ahead with the same Oracle unsupported environment?

  Auxiliary R12 with RMAN db clone.

• RMAN cloning using the recovery catalog

  Hi all
  
  I do RMAN cloning using the recovery catalog.
  
  I use oracle 10R2 on solaris, I have a PRIMARY primary database name. I create another database for the catalog name of recovery REC_DB. and the master database with REC_DB record and took the full backup. now I have a full backup of the PRIMARY database in the recovery catalog.
  
  Now I want to clone the MAIN database using this backup (backup of the catalog).
  
  I've done this before, without using the catalogue,
  
  I know that the orders and the cloning procedure, I want to ask how to connect from the auxiliary.
  
  RMAN target sys/password@source_DB_string auxiliary sys / password@clone_DB_string *.
  
  here target means what? primary or catalog database. kindly help me on this.
  
  Kind regards
  Kumar

  >

  >

  I know that the orders and the cloning procedure, I want to ask how to connect from the auxiliary.

  RMAN target sys/password@source_DB_string auxiliary sys / password@clone_DB_string *.

  here target means what? primary or catalog database. kindly help me on this.

  Looks like it is exactly what you were asking.

  You need to connect to the TARGET, CATALOG & AUXILIARY of the rman prompt instance.
  You then run your script/command clone, which you claim you already know how to do.

• RMAN-04017: description of the startup error: ORA-32004: obsolete parameters or obsolete er (s) specified for the instance of RDBMS

  Dear all,

  While making the cloning of RMAN using the command duplicate in 11.2.0.3 database with ebs.

  We receive the error below

  connected to the auxiliary database (not started)

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db in dual at 03/07/2015 15:12:07

  RMAN-06403: could not get a fully authorized session

  RMAN-04006: auxiliary database error: ORA-24327: need explicit attach befor

  e a user authentication

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-04014: failed to start: ORA-03113: end of file on communication channel

  RMAN-04017: description of the startup error: ORA-32004: outdated or obsolete parameters

  ER (s) specified for the instance of RDBMS

  Kind regards

  Villi Kumar

  Dear all,

  We have corrected the problems.

  Solution:

  To the bottom of the database

  Comment this parameter and re try

  =====================================

  oratest@ctsst $ grep-i local initerptest.ora

  #local_listener = erptest_LOCAL

  oratest@ctsst $

  Test the issue again.

  Concerning

  Villi Kumar

• I use TDE tablespace encriptación and backup is performed (no encriptación rman). I get the error message when you try to restore the database

  I use TDE tablespace encriptación and backup is performed (no encriptación rman). I deleted the database and try to restore the backup. I get the error when you try to restore the database with rman restore database.

  ORA-19870: error when restoring backup piece + FRA_DG, oratst, backupset, 2015_03_2

  ORA-19913: could not decrypt the backup

  ORA-28365: portfolio is not open

  About what I know, you should be able to RESTORE the data, but no RECOVERY without portfolio being opened.

  Check the value of the variable environment - ORACLE_UNQNAME

  It has everything first a correct value and try to open the wallet.

  HTH,

  Pradeep

• What happens if RMAN has stopped in the Middle?

  How can manage us if RMAN being stopped in the Middle?

  Restart RMAN backups

  With the reusable backup feature, RMAN backs up only files that were not saved after a specified date.

  bootable backup

  The feature that allows to RMAN back up only the files that have not been backed up since a specified date. Restart unit ended last backup set or copy of the image. You can use this feature after a backup fails to save the parts of the database behind the backup failed.

  On redemarrables backups

  The minimum unit of restart is a data file. However, if a backup set contains a backup piece, and this piece contains blocks of several data files, then restart unit is the backup piece. The reboot to get copies of the image unit is a data file.

  The advantage of redemarrables backup is that if the backup generates multiple backup sets, then backup completed successfully sets do not be rerun. However, if the entire database is written in a backup set, and if the backup fails to halfway through, then the whole of the backup should be repeated.

  IO errors that RMAN meets when reading files or writing for the backup pieces or copies of the RMAN image put an end to the current backup task. For example, if RMAN tries to save a file of data, but the data file is not on the disk, then RMAN complete backup. If several channels are used or redundant backup copies are created, then RMAN can however be able to continue the backup without user intervention.

  RMAN can back up only the files that have not been backed up since a specified date. Use this function after a backup fails to save the parts of the database behind the backup failed.

  You can reboot a backup by specifying the SINCE TIME clause on the BACKUP command. If the SINCE TIME is later than the time of execution, then RMAN backs up the file. If you use BACKUP DATABASE NOT BACKED UP without the SINCE TIME parameter, then RMAN backs up only files that have never been backed up.

  Restart a backup after having partially completed

  Use of the SINCE TIME parameter of the BACKUP command to specify a date after which a new backup is necessary. If the SINCE TIME is later than the time of execution, then RMAN backs up the file. If you use BACKUP DATABASE NOT BACKED UP without the SINCE TIME parameter, then RMAN backs up only files that have never been backed up.

  To back up only files which have been saved after a specified date:

  1. Start RMAN and connect to a catalog of database and recovery target (if used).
  2. Run the BACKUP ... NOT BACKED UP SINCE TIME command.

     Specify a valid date in the SINCE TIME parameter. The following example uses the default channel configured to back up all database files and logs archived recovery that have not been backed up during the last two weeks:

     BACKUP NOT BACKED UP SINCE TIME 'SYSDATE-14' DATABASE PLUS ARCHIVELOG;
     

• measures to this end the R12 on 11.2.0.2 RAC to the cloning on Win2008 64 bit Non-Rac

  Please inform the steps to the R12 on 11.2.0.2 RAC Rac no cloning on Windows 2008 64 bit.
  
  There is a metalink document but it means for linux environment, but not Windows. Please inform the steps if someone did it on windows.

  ORA-appsdba says:
  Please inform the steps to the R12 on 11.2.0.2 RAC Rac no cloning on Windows 2008 64 bit.

  There is a metalink document but it means for linux environment, but not Windows. Please inform the steps if someone did it on windows.

  The procedure should be the same for Windows (with minor amendments, as you may need to create the Oracle service before replication of the database).

  Cloning Oracle Applications V12 with rapid Clone [ID 406982.1]
  Documentation fund quick Clone version 11i and 12 [799735.1 ID]
  Cloning of Oracle E-Business Suite Release 12 RAC systems compatible with the Rapid Clone [ID 559518.1]
  Scenarios RAC certified for E-Business Suite cloning [ID 783188.1]

  Thank you
  Hussein

• RMAN in anticipation of the database

  Hi all
  
  We want to configure RMAN in the physics of the standby database, but get error below
  
  [oracle@timsdr ~] $ rman catalog rmandr/rmandr@rman target/password system
  
  Recovery Manager: Release 10.2.0.1.0 - Production on Fri Feb 26 17:04:36 2010
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  connected to target database: TIMS (DBID = 3639374466, is not open)
  connected to the recovery catalog database
  
  RMAN > show all.
  
  RMAN configuration parameters are:
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the show command at 26/02/2010 17:08:34
  RMAN-06004: error ORACLE recovery catalog database: RMAN-20001: target not found in the recovery catalog database
  
  RMAN >
  
  
  DB pending is in editing mode. Please give an idea...

  Catalogue rmandr/rmandr@rman

  This catalogue is different from the one registered with the Production database?
  Note: You cannot save the same database - that is to say the Production and standby are the same DBID - twice in a catalog.
  Yet your catalog reports that the database is not registered.
  Apparently, Production is on a different catalog OR is not registered at all.

  If you use the same catalog, you should
  a. NOT to register the day before
  b. STOP the recovery on the eve
  c. MOUNT WATCH on the eve
  and then the day before RMAN BACKUP

  Once the backup is complete, start the recovery on the day before.

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• Configuration of RMAN in anticipation of the database

  Hi all
  
  We have to configure RMAN in stanby Server database, so please give some advice.
  
  
  Database server: Oracle 10 g RAC with 2 nodes
  Backup server: Oracle 10g
  Platform: RHEL-4
  
  
  Thank you
  
  Achyot

  Hello
  It is true that for physical standby Robert says. If you use the suspend logic, the backup is not identical to the primary database.
  In addition, you said that the wait is in read-only mode. If it is physical in the version prior to 11g, when the database is read-only, it is not get synchronized with the primary, she can apply archives only when mounted.
  Anyway, you can use RMAN to back up the database pending.

  Liron Amitzi
  Consultant senior s/n
  [www.dbsnaps.com]

• RMAN backup fails with the error

  Hi all
  
  Oracle 10.2.0.3
  Windows 2003 Server
  
  We take RMAN backup full every day. We are facing problems while taking backups.
  Please find the error message is recorded in the backup log.
  
  RMAN-03009: failure of the backup command on channel ch1 at 2009-09-07 23:17:05
  ORA-19502: write error on file '\\VN619. In. NAB.COM\ORACLE_BACKUP\DB\DB_DATA_GHKOM9K0_3_1_20090907 ", blockno 342401 (blocksize = 8192).
  ORA-27072: IO file error
  OSD-04008: WriteFile() failure, cannot write to the file
  S/O-error: (OS 64) the specified network name is no longer available.
  
  What is happening Alternatively, some days, the backup is successful. We thought that the problem of network and changed the way network access, but since a few days, it was ok, and even now, we are facing the same problem.
  
  I spoke with our network administrators, they said its not related to the network and there is no errors in the log of their network.
  
  
  If you please advice to slove this...
  
  TIA,

  RMAN works very well. This is your network connection. He sometimes works normal, sometimes doesn't

• How to troubleshoot RMAN several records for the 2 disk channel?

  Hello
  I configured a channel 2 on the disk by mistake and I now get the following error message when I run the command: show all. I get the following.
  
  
  RMAN > show all.
  
  Database with db_unique_name RAC RMAN configuration parameters are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 14 DAYS WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE;
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the show command at 21/04/2009 11:36:41
  RMAN-12010: automatic channel distribution initialization failed
  RMAN-12013: several recordings for channel 2 DISC found in the catalog

  Try to clear the channel. See the notes 259625.1 on MOS.

• RMAN-00565: cannot read the input BIA-01506 file: fflush() failed (return OSD

  Scheduled backups, TSM match times will fail with the following error
  ' RMAN-00565: cannot read the input file.
  BIA-01506: fflush() failed (OSD return value = 5). »
  
  And flooding the natural logarithm of exit with the following error
  
  ' RMAN-00558: error occurred during parsing of order entry.
  RMAN-01006: error scored during the analysis
  ' RMAN-00600: internal error, arguments [2012] [] [] [] [] "that leads to the FS is filled up to 100%.
  
  But backups are run successfully if start us it manually. Can someone help me with this

  You will need to set echo on inside your execution block.

  #!/bin/ksh
  . .env
  rman target=/ nocatalog log="${BKP_LOGS}/tsm_${ORACLE_SID}_ARCH_$(date '+%y%m%d@%H%M%S').log"
  run {
  set echo on
  allocate channel t1 type 'SBT_TAPE' parms
  'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo_${ORACLE_SID}.opt)';
  backup archivelog all delete input;
  release channel t1;
  set echo off
  }