Robocopy syntax correct

Similar Questions

• syntax higlighting (php in html docs)

  Hello.
  
  Instead of .php I use .html to analyze my php files. But DW illustrates the syntax highlighting for html, even between <? PHP? >. It is quite uncomfortable when writing php. Is there a way I can make the syntax correctly? Perhabs there is an extension (I can't find something).
  
  Hope for more help.
  
  Thank you.

  Hi David.

  Thanks for the link. That's what I wanted :-)

  The main thing I've done is open MMDocumentTypes.xml add html to victory-/ macfileextnesion (line 75) and delete the html of the third line because there was an error that double declarations are not allowed. Now, I can view html files with php code inside and good highlighted.

• Syntax checking does not?

  Hi, I am getting a weird behavior in Flex Builder and don't know what the cause is... initially I got this as a class AS:
  package AS.common.controls {}
  Import mx.controls.DateField;
  Import mx.formatters.DateFormatter;
  SerializableAttribute public class StrictDateInput extends DateField {}
  ..
  }
  private class StrictDateFormatter extends DateFormatter {}
  ..
  }
  }
  
  and there is no error... now, I made some changes to the code (in fact I just tried to put the class in a .mxml file... I has not yet changed the original code) and I get an error for the private class definition. If I change inside the error disappears. It's maybe just that I don't understand the difference between private and internal classes, but here's where I'm frustrated:
  There are no errors displayed in Flex builder, but when I launch an application that has the class StrictDateInput, the pop-up appears in Flex Builder that I have an error in my project I want to run?
  
  The only way I can get the thing to run is to comment on the definition of the internal class, THEN expand mx.controls.DateField (even if I imported it in the definition of the package).
  
  Any ideas what's happening here? The code is bad? Flex Builder gives bad messages? Or Flex Builder checks the syntax correctly?
  

  jpwrunyan wrote:
  > Hi, I am getting a weird behavior in Flex Builder and not sure what the
  > cause... originally, I had this as a class AS:
  > package {AS.common.controls}
  > import mx.controls.DateField;
  > import mx.formatters.DateFormatter;
  > / public class StrictDateInput extends DateField {}
  > ..
  > }
  > private class StrictDateFormatter extends DateFormatter {}
  > ..
  > }
  > }
  >
  > and there is no error... now, I made some changes to the code (in fact
  > I just tried to put the class in a .mxml file... I did not even change the
  (> original code) and I get an error for the private class definition. If I have
  > Change it to internal error disappears. Maybe it's just that I don't have
  > understand the difference between private and internal classes, but here is
  > where I'm frustrated:

  The class private inside the package declaration is not legal. He has been
  legal in some versions beta, although only.

  As you discovered, you need make the class "internal". Moreover,.
  You can set the class outside of the package. For example,.

  package AS.common.controls {}
  Import mx.controls.DateField;
  SerializableAttribute public class StrictDateInput extends DateField {}
  ..
  }
  }

  Import mx.formatters.DateFormatter;
  class StrictDateFormatter extends DateFormatter {}
  ..
  }

  Note that the import in the package instructions do not apply to the
  class defined outside the package. You may need to repeat the same
  import the accounts.

  Definition of the class outside of the package, it is really "private".
  Declared as "internal" classes are visible to other classes in the same
  package.

  -Greg Dow
  -Adobe Flex Builder Team

• XCOPY HELP!

  I'm in Recovery Manager trying to move the files to the computer on a USB, yes I only have a USB key so I don't want to use the backup utility. I am using the command prompt and I have a ton of photo folders and subfolders that I would copy before you reset the computer to factory settings, I know that Xcopy will help me to do it, I don't know how. I want to copy all documents in the folder images. anyone has any idea how?

  Hello

  Vista XCOPY command
  http://ITsVISTA.com/2007/03/xcopy/

  The Xcopy command syntax
  http://commandwindows.com/xcopy.htm

  ----------------------------------------------

  Vista also supports the latest RoboCopy command that adds more features and functionality
  and uses most of the Xcopy command structure. Highly recommend the use of this instead of Xcopy.

  Syntax of Robocopy, samples, and command-line switches
  http://www.mydigitallife.info/2007/05/07/Robocopy-syntax-command-line-switches-and-examples/

  Create a custom with Vista's Robocopy backup tool
  http://blogs.TechRepublic.com.com/window-on-Windows/?p=777

  =============================================================

  If you want to keep the reader Flash AND the folders and files on the disk hard drive in sync using
  SyncToy 2.1

  How to synchronize two folders using SyncToy
  http://www.online-tech-tips.com/free-software-downloads/sync-two-folders-Windows/

  Downloads: Download details - SyncToy 2.1
  http://www.Microsoft.com/Windows/downloads/details.aspx?FamilyId=c26efa36-98E0-4ee9-a7c5-98d0592d8c52

  SyncToy - Forum
  http://social.Microsoft.com/forums/en-us/SyncToy/threads/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How do I... with Windows 7 search?

  How do you search by the contents of the file ONLY.

  How does a search of contents of a file regardless of the file type (for example, find strings embedded in executable files)?

  How do I specify whether to search subfolders or not?

  How can I specify what drives or folders to search for? For example, how to find C:\ and E:\ including subfolders but not D:\, or how search c:\Data and D:\store\value but not the other files (like the rest of the files would be a waste of time).

  Much of my data is sensitive and should not be indexed for reasons of security. How can I erase the clues and do make sure no indexation is facts? How can I see what has been indexed?

  How can I specify that the search should be case-sensitive?

  Finally, why is that when I click on 'Computer' in Explorer tree, I can type things in the field of research, but can't really find?

  Looking forward to more effective research...

  -Tim

  Did you know that... Windows Search is developed separately from the team of the Windows operating system.

  I would respectfully ask that Windows Search are given to the Windows operating system team for the rewrite.  If separate people cannot make it work any better than what it does (no t) after 4.0 versions it is now time to call it quits.  The team of the OS, on the other hand, knows how to create software that actually works and gets things right 100% of the time.

  Repeat after me: is not right until every last occurrence of what is sought is found, every time!

  How to search for content only, what about excluding files names, (keeping in mind the well-known possibility that Windows Search could not actually FIND the content that is there, even when you specify the syntax correctly), try to search using this form:

  content: ChaineCherchee

  To search for a file by extension, as you would have done it before with *.xyz, use this form:

  ext: XYZ

  -Christmas

• Reader 6.0.2 is not found bootfiles load Win98 or Win95 comments/s in Windows 8.1 host of CD rom

  Hi everyone, this is my first post on this site and thanks to etung for your pro forma re; "How to ask a question. I'll try to include all relevant data needed for the resolution.

  I recently bought a computer modern with Windows8.1 (I was already with Win95, Pentium133 more than ten years ago) and more recently still to overcome the virtual machine technology. So I'm kinda new in the current calculation method.

  The problem:

  Properly downloaded VMWare Player 6.0.2 build 1744117 on the host Windows 8.1, 64 bit, build 9600. Running Kaspersky Pure 3.0.

  Drive seems to install/function normally, until I try to create guest VM, (Windows98se in CDrom drive). Then I would get the "OS not found" response.

  

  

  Repeated above steps using my old drive CDrom Win95 system, to eliminate the possibility of defective disc; This question is displayed every time, no change.

  So I can miss some obvious clues, which is quite possible.

  After a few possible cause search on this (10 hrs Google, articles, messages, etc.) reduced to the default (?) setting in the drive to perform "network boot". Startup process has proved to be much too fast for my reflexes, to be sure! That prevented me to access the start menu.

  In the pursuit of this line of inquiry, "delay for starting access" workaround has been used (which helped, but it ultimately failed to solve):

  Web search me headed in the direction of change the file .vmx to create/insert the time required, but which proved a somewhat false trail, as the record seems not to have a .vmx file in the correct syntax/language (I met a vmxf file containing the XML instead, not the required type to activate commands such as bios.bootDelay = "10000"). I put it on the blog/post referring to an earlier version of the reader to 6.0.2. I then played with the VMware virtual machine configuration file, found in the same folder. He had the syntax correct / similar as bios.bootDelay order (I haven't studied what language it is, still). However, he has worked, for what it's worth-

  

  The two commands that I inserted in the virtual machine configuration file reaches VMware line:

  1. a start delay that was long enough for me to choose the start menu; According to the order -

  bios.bootDelay = "10000".

  This will give the 10 000 milliseconds of the user, or ten seconds to choose in the menu

  2. the boot order forced reading of the CDrom, first of all, in particular the "boot network;" according to the order -

  bios.bootOrder = "CDROM".

  These are the LAST fifth and sixth lines of code found in the attached file, respectively.

  I even inserted the above commands in various places in the file, only to get the same result (to eliminate the last command replace possibility; this thought probably shows my skills of some enlightened software poorly).

  I realize that as there may be a problem unsolved with the boot sequence, in that for some reason startup files any are not in the CDrom, removable devices or hard drive, then the boot sequence will resort to the procedure of "network boot". I do not have the skills necessary to investigate the boot sequence or filepaths as used by the player at the moment.

  

  More information of system below;

  

  If I did things correctly, there will be two files attached with this post;

  Configuration of virtual machine VMware file.txt, and

  VMware-vmplayer-1512 (from temp file) .txt

  Please let me know if there is anything that I have left out.

  So my question remains; what the hell is going on?

  I hope there is a solution out there, because this represents a lot of research... at least for a newcomer.

  Many thanks to those who help people like me; I read a few responses from this community who really impressed me!

  Kind regards

  thead0408

  Welcome to the community,

  I guess that the problem is not related to VMware Player, and/or configuration, but more for the installation of Windows CD / ISO, which is perhaps not bootable and requires the floppy to boot (images) for the installation of the OS.

  André

• race of cloning script error

  I am trying to clone a virtual machine using this script (http://communities.vmware.com/message/1291604#1291604) and get the following error...

  The term 'Find-EntityView' is not recognized as a cmdlet, function,

  script file, or an executable program. Check the spelling of the name, or if a path

  has been included, make sure the path is correct, and then try again.

  At C:\MyDocs\work\Virtualization\VMWare\VMware_Healthcheck\Admin_Scripts\Create

  _VMs2.ps1:34 char: 22

  + $HS = find-EntityView < < < < HostSystem - ViewType

  + CategoryInfo: ObjectNotFound: (find - EntityView:String) [Com]

  mandNotFoundException

  + FullyQualifiedErrorId: CommandNotFoundException

  Could not find the http://VMware.Vim.VirtualMachineRelocateTransformationtype: m

  ake sure that the assembly containing this type is loaded.

  At C:\MyDocs\work\Virtualization\VMWare\VMware_Healthcheck\Admin_Scripts\Create

  _VMs2.ps1:40 tank: 78

  + $vmrSpec.transform = http://VMware.Vim.VirtualMachineRelocateTransformation

  < < < <: sparse

  + CategoryInfo: InvalidOperation: (http://VMware.V...eTransforma )

  tion:String) [], RuntimeException

  + FullyQualifiedErrorId: TypeNotFound

  Get - VM: 27/08/2010-12:35:53 Get - VM VM with the name 'TSRM_nc033211' not

  t found, using the specified filters.

  At C:\MyDocs\work\Virtualization\VMWare\VMware_Healthcheck\Admin_Scripts\Create

  _VMs2.ps1:57 tank: 16

  + $vmmor = get - VM < < < < - $vmtemplate #Get - model name - name $vmtemplate

  + CategoryInfo: ObjectNotFound: ( , VimException)

  + FullyQualifiedErrorId: Core_ContainerCmdletBase_ObjectNotFoundByName, VM

  ware.VimAutomation.Commands.GetVM

  Get-view: could not validate the argument on the parameter "Id". The argument is null or

  empty. Provide an argument that is not null or empty, and then try the command ag

  Ain.

  At C:\MyDocs\work\Virtualization\VMWare\VMware_Healthcheck\Admin_Scripts\Create

  _VMs2.ps1:58 char: 22

  + $vmmorview = get-view < < < < $vmmor.id #Get - View (Get-VM-name 'WinXPSP2_Basel

  INE user.user")

  + CategoryInfo: InvalidData: ( , ParameterBindingVal)

  idationException

  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom

  ation.Commands.DotNetInterop.GetVIView

  You can not call a method on a null value expression.

  At C:\MyDocs\work\Virtualization\VMWare\VMware_Healthcheck\Admin_Scripts\Create

  _VMs2.ps1:61 char: 32

  + $task = $vmmorview. CloneVM_Task < < < < ($targetview. MoRef, $vmname, $vmcSpec)

  + CategoryInfo: InvalidOperation: (CloneVM_Task:String)], runt

  imeException

  + FullyQualifiedErrorId: InvokeMethodOnNull

  Finish

  Hi again,

  The first error means that there is no enough free memory during the last run of the script. Try closing the PowerCLI console, to start a new and rerun the script.

  But before that, you must apply minor correction on this line:

  $vmmor = get-VM-name $vmtemplate Get-model-name $vmtemplate

  Must be either:

  $vmmor = get-VM-name $vmtemplate

  or both:

  $vmmor = get-Template-name $vmtemplate

  Current state of the row has no syntax correct powershell.

  Vitali

• Search DVM in XSLT

  Hi all
  
  I use DVM loopup for a multiple selection, but every time I see the output as "NotFound".
  
  DIGITAL VOLTMETER:
  SenderID receiver ID orderid ordertype custid bussid
  006995419LATST 006995419LATST SA USAOP CRM138150 123456
  006995419LATST 623448073TEST SS U SAOP CRM138150 CRM138150
  006995419LATST 623448073TEST RN USAOS CRM138150 CRM138150
  
  Ex: select BilltoCustid where SenderId = XX, ReceiverID = XX, Ordertype = XX
  
  We can do this by using DVMLOOKUP, if so, please suggest me with solution
  
  I use the below query, I get the result as "Notfound" every time
  < xsl: value-of select = 'dvm:lookupValue("EDIOrderFDM.dvm","Ordertype",.._/_ns0:Segment-BEG/ns0:Element-92/@Type,"SoldtoCustid","NOTFOUND","SenderID","8642882432","ReceiverID","623448073_»)' / >
  
  Correct me if I'm wrong
  
  
  Concerning
  Francis

  I used your DVM file in my example project and at run time, the value of the entry of BPEL process will impact research DVM Xpath function...

  I did it using the activity assign and transform... his works in both cases...

  r: DVM in XSLT Lookup, I pass the entrance to get the output as CRM138150 and RN

  -----

  
  
  
  
  
  
  
  

  -----------
  Even when I'm working in this case, I got the output as NOTFOUND, discovered later that the input element is not mapped to the Xpath DVM function in Design view if I have the syntax correct input of mapping in source view element. So, what I did was, went into design mode, go to this look DVM function, remove the Xpath expression in the value of the OrderType SourceCOlumn name source, then I pressed Ctrl + space in the sourceValue and then selected the input element. This time, I can see input element is mapped to the DVM Xpath function into design mode and I still have the same syntax mapping to correct entry in source view element. Just, I did this work around to make sure that the input element is mapped to Xpath DVM, which we can see in design mode. After having done that, it worked.

  case b: DVM Lookup affect the business, I pass the entrance to get the output as CRM138150 and RN

  -------

  DVM:lookupValue ("EDIOrderFDM.DVM", "OrderType", bpws:getVariableData('inputVariable','payload','/client:Process/client:input'), "SoldtoCustid", "NOTFOUND", "SenderId", "8642882432","ReceiverID","623448073")

  -----------------

  Hope this helps,
  N

• Update boot entry automatic using vmware-vim-cmd (or vmware-vimsh)

  Hello

  Is there an example of how update the automatic start-up using vmware-vim-cmd input.

  The problem that I am running is

  1. when I type

  VMware-vim-cmd hostsvc/autostartmanager/update_autostartentry 16 powerOn-1 1-1 systemDefault systemDefault

  When 16 is one of my VMIds, I get the following

  Invalid option '1'

  Use: update_autostartentry VMId StartAction StartDelay StopAction StopDelay WaitForHeartbeat Strafpkt

  I can't understand what the invalid option '1'.

  Here's what I've done so now

  1. research in the communities for examples. There are a few messages, but none seem to provide real-world examples of work (beyond the use of message)

  2. I found this link http://pubs.vmware.com/vi-sdk/visdk250/ReferenceGuide/vim.host.AutoStartManager.AutoPowerInfo.html who talks about what type of entry it is pregnant. I tried double quoting and only citing the parameters of xsd: String, but that did not work either

  3. I tried the particular settings (including the xsd: int) doublequoting, which did not work either

  Anyone successful with this? If so could you please post a real example.

  Here's what I'm trying to accomplish

  1 activate Autostart - I did that using

  / usr/bin/VMware-vim-cmd hostsvc/autostartmanager/enableautostart true

  2. get all VMIds in the system

  I did it with the following command and awk script

  / * Awk script * /.

  BEGIN {}

  FS = ""

  NR 1 >

  }

  {

  If (NR == 1) {}

  #ignore header

  }

  else {}

  1. $1 has VMIds

  Print $1

  }

  }

  / * End awk script * /.

  Then run/bin/awk f /root/autostart.awk

  3. instead of printing on $1, I would like to add the virtual machines to the list using the following

  a. start-up delay = systemdefault

  start-up (b) action = poweron

  c. start order = 1, 2, 3, 4 (do not need help with AWK script), I can post once I have that.

  d. stopaction, stopdelay etc. - leave at the default system (or - 1 as the pubs suggested link)

  I'm sure that there are more effective and these ways to do this, I need to follow this approach for a specific reason.  I was wondering if someone can help me with the syntax correct for vmware-vim-cmd hostsvc/autostartmanager/enable_autostart please?

  Thanks for your help!

  -Vermorel

  It seems that the problem is with you using -1 as input for StartDelay and StopDelay,-1 is not a valid entry that I tested, and you must specify either systemDefault or a time interval.

  I created 4 VMS dummy on ESXi 4.0 host and did the following and it worked:

  Enable auto-start through vimsh (vim - cmd)

  ~ #  vim-cmd hostsvc/autostartmanager/enable_autostart 1
  Enabled AutoStart
  

  Adjustment of the 1st virtual machine:

  ~ # vim-cmd hostsvc/autostartmanager/update_autostartentry 1264 "PowerOn" "15" "1" "systemDefault" "systemDefault" "systemDefault"
  
  1Updated AutoStart order.
  

  Definition of the 2nd VM:

  ~ # vim-cmd hostsvc/autostartmanager/update_autostartentry 1232 "PowerOn" "15" "2" "systemDefault" "systemDefault" "systemDefault"
  
  2Updated AutoStart order.
  

  Definition of the 3rd VM:

  ~ # vim-cmd hostsvc/autostartmanager/update_autostartentry 1280 "PowerOn" "15" "3" "systemDefault" "systemDefault" "systemDefault"
  
  3Updated AutoStart order.
  

  Definition of the 4th VM:

  ~ # vim-cmd hostsvc/autostartmanager/update_autostartentry 1264 "PowerOn" "15" "4" "systemDefault" "systemDefault" "systemDefault"
  
  4Updated AutoStart order.
  

  You can manually set the automatic start/stop by using the vSphere Client and using the following command to retrieve the config:

  vim-cmd hostsvc/autostartmanager/get_autostartseq
  

  which can then be used as a basis to set the configuration.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• What is the best way to manage the result variable? (IF THEN GOTO)

  I want to ask a question and then use the response on the position of my result, in a very old language and is no longer used, it would be IF a = 1 THEN GOTO 20, SO a = 2 THEN GOTO 30

  I did experiment with switch, case

  but its not really give me the results that I'm at the end, the conclusion is i do not use the syntax correctly or I use the right method.

  var docRef = app.activeDocument;

  var items = docRef.selection;

  var abRef = docRef.artboards;

  var swatchBoxX =-71.5

  var swatchBoxY = 372.518

  var swatchBoxSize = 22.04

  var totalSelected = items.length;

  newGroup var = docRef.groupItems.add ();

  newGroup.name = "ArtworkGroup";

  app.coordinateSystem = CoordinateSystem.ARTBOARDCOORDINATESYSTEM;

  abRef.setActiveArtboardIndex (0);

  position var prompt = ("Please enter the Position (1) front, (2) = back, (3) = left channel, (4)" = right channel ', '1', 'Print Position' ");

  switch (position) {}

  case 1: swatchBoxX =-71.5.

  break;

  case 2: swatchBoxX =-490;

  break;

  box 3: swatchBoxY = 840 & & swatchBoxX =-490;

  break;

  }

  If (totalSelected > 0) / / check selected objects

  {

  for (var j = 0; j < totalSelected; j ++) //loop through selection

  {

  var tpBox = swatchBoxX +-34.2

  var currentObject = items [j];

  var color = currentObject.fillColor.spot;

  myText = docRef.textFrames.add ();

  myText.contents = color;

  myText.position = [401, swatchBoxX];

  Rect = docRef.pathItems.rectangle (swatchBoxX, swatchBoxY, swatchBoxSize, swatchBoxSize) var;

  swatchBoxX = tpBox

  rect.fillColor = colour.color;

  Rect.stroked = true

  items [j] .duplicate (newGroup, ElementPlacement.PLACEATEND);

  } //end for

  } //end if

  else {}

  Alert ("Please select at least one object");

  }

  newGroup.resize (20,20,true,true,true,true,20,Transformation.CENTER)

  newGroup.position = [160, -130];

  I just need some advice please

  Yep, put your more likely to use the first option, and more add an option 'default' in the end, in the case where a person enters a key out of reach

  default:
       swatchBoxX='whatever you want';
  

• For loop and access objects by the instance name.

  Hey guys,.

  What I'm trying to do should be very simple, I want to make several non-visible movieclip objects using a loop for.

  Here is what I currently have...

  for (var i: Number = 1; i < 8; i ++) {}

  high [i] .visible = false;

  }

  I have therefore 8 movieclip objects that have names of "high1" instance, "high2", "high3" and so on until 8

  What is the syntax correct for this line of code to make this work?

  high [i] .visible = false;

  Thank you.

  You can use string to instances of the target values, if you use the support rating:

  for (var i: Number = 1; i<8;>

  This ["high" + String (i)] .visible = false;

  }

• Vertical text align text in AppleScript.

  Hi, can't seem to get the syntax correct vertically align the text in the text block for AppleScript.

  Thank you

  Joe

  Hey Joe,

  Can you please try this, I hope that expect you that?

  tell application "Adobe InDesign CS4"
       set myVerticalJustification to center align
       set vertical justification of text frame preferences of selection to myVerticalJustification
  end tell
  

  THX

  csm_phil

• Date of liaison caveat

  Hello!

  How can I get rid of the link warning I get when I use:

  < s:Label text = "{new Date () .fullYear}" / >

  -OR-

  [Bindable] private var nowDate:Date = new Date();

  (...)

  < s:Label text = "{nowDate.fullYear}" / >

  Thank you!

  Text = "{Date () .getFullYear ()}" new

  Is the syntax correct mxml.

• send several ID field of unique text through drop-down lists

  Hello

  It drives me crazy.

  I have x 3 drop-down menus 'Day' "Month" "Year" and I want to send these parts to a single rating marked with the id 'date' to compensate for a syntax correct date without refreshing or send the form. I use getelementbyid to send the onchange = "getAmount (this.id) request for drop-down list", but it sends only an id and when the next drop-down list is selected it replaces the previous selection, rather than putting all of this together in correct date format. "

  Here is the code I use, but it is clearly wrong: -.

  Each drop-down list: -.

  getAmount (this.id)

  and then the following javascript code to send the ID

  < script type = "text/javascript" >

  function getAmount (optText)

  {

  var salt = document.getElementById (optText);

  document.getElementById("date","['EventDayID_<?php_echo_$cnt1;_?>','EventMonthID_<?php_echo_$cnt1;_?>','EventYearID_<?php_echo_$cnt1;_?>']").value = sel.getElementsByTagName ("option") [sel.selectedIndex] .innerHTML;

  }

  < /script >

  and the input field I want to enter the full date: -.

  < input type = "text" name = "" id = "date" / >

  Is anyine knows how to handle this?

  Thank you very much

  Glennyboy

  You only need one identifying any...

  Change your Mysql in bulk or add check boxes used or unused:

  SELECT * FROM table WHERE IS NULL or IS NOT NULL column

  You can extend your

  SELECT * FROM table WHERE column1 = something AND column2 IS NOT NULL

  or

  you check every box before printing it, if (cb1! = "" or cb1 == "") {echo/print/do something ;}

  Thank you

  J

• First here substitute for MicroType TimeSavers?

  2009-04-07 - 02T 12: 40Z

  My apologies to you, Shlomo, but I have to ask.

  FrameMaker 7.1p116

  Acrobat Professional 8.1.3

  As they might say in New York, "not for nothing, but...". "I could not post to the FrameUser list and the list of free editors.  If you subscribe to one or both, you please post this here for me?

  First here a substitute for time?

  If Yes, what?

  ¡Thanks in advance for your quick responses!

  Dave Stamm

  [email protected]

  As far as I know, a very small number of very basic things that TimeSavers could be done directly in FM, if - and that's a big IF - new syntax correct pdfmark and you knew where / how to insert the codes, and then how FM uses (or does not work!) the codes by creating PDF files.  Examples of relatively basic features I've personally done through code pdfmark are things like bookmarks PDF colorize and add additional bookmarks.

  However, the vast majority of the TimeSavers capabilities cannot be reproduced otherwise. As far as I know, there is no all the other apps that do the same things, certainly nothing in the FM and nothing in the stadium of "post-FM production" in the world of PDF-handling.

  Sheila