Reader 6.0.2 is not found bootfiles load Win98 or Win95 comments/s in Windows 8.1 host of CD rom
Hi everyone, this is my first post on this site and thanks to etung for your pro forma re; "How to ask a question. I'll try to include all relevant data needed for the resolution.
I recently bought a computer modern with Windows8.1 (I was already with Win95, Pentium133 more than ten years ago) and more recently still to overcome the virtual machine technology. So I'm kinda new in the current calculation method.
The problem:
Properly downloaded VMWare Player 6.0.2 build 1744117 on the host Windows 8.1, 64 bit, build 9600. Running Kaspersky Pure 3.0.
Drive seems to install/function normally, until I try to create guest VM, (Windows98se in CDrom drive). Then I would get the "OS not found" response.
Repeated above steps using my old drive CDrom Win95 system, to eliminate the possibility of defective disc; This question is displayed every time, no change.
So I can miss some obvious clues, which is quite possible.
After a few possible cause search on this (10 hrs Google, articles, messages, etc.) reduced to the default (?) setting in the drive to perform "network boot". Startup process has proved to be much too fast for my reflexes, to be sure! That prevented me to access the start menu.
In the pursuit of this line of inquiry, "delay for starting access" workaround has been used (which helped, but it ultimately failed to solve):
Web search me headed in the direction of change the file .vmx to create/insert the time required, but which proved a somewhat false trail, as the record seems not to have a .vmx file in the correct syntax/language (I met a vmxf file containing the XML instead, not the required type to activate commands such as bios.bootDelay = "10000"). I put it on the blog/post referring to an earlier version of the reader to 6.0.2. I then played with the VMware virtual machine configuration file, found in the same folder. He had the syntax correct / similar as bios.bootDelay order (I haven't studied what language it is, still). However, he has worked, for what it's worth-
The two commands that I inserted in the virtual machine configuration file reaches VMware line:
1. a start delay that was long enough for me to choose the start menu; According to the order -
bios.bootDelay = "10000".
This will give the 10 000 milliseconds of the user, or ten seconds to choose in the menu
2. the boot order forced reading of the CDrom, first of all, in particular the "boot network;" according to the order -
bios.bootOrder = "CDROM".
These are the LAST fifth and sixth lines of code found in the attached file, respectively.
I even inserted the above commands in various places in the file, only to get the same result (to eliminate the last command replace possibility; this thought probably shows my skills of some enlightened software poorly).
I realize that as there may be a problem unsolved with the boot sequence, in that for some reason startup files any are not in the CDrom, removable devices or hard drive, then the boot sequence will resort to the procedure of "network boot". I do not have the skills necessary to investigate the boot sequence or filepaths as used by the player at the moment.
More information of system below;
If I did things correctly, there will be two files attached with this post;
Configuration of virtual machine VMware file.txt, and
VMware-vmplayer-1512 (from temp file) .txt
Please let me know if there is anything that I have left out.
So my question remains; what the hell is going on?
I hope there is a solution out there, because this represents a lot of research... at least for a newcomer.
Many thanks to those who help people like me; I read a few responses from this community who really impressed me!
Kind regards
thead0408
Welcome to the community,
I guess that the problem is not related to VMware Player, and/or configuration, but more for the installation of Windows CD / ISO, which is perhaps not bootable and requires the floppy to boot (images) for the installation of the OS.
André
Tags: VMware
Similar Questions
-
Original title: 800ccc0d ERROR FIX
Hi people, I am getting an error ("the server is not found") when trying to connect to my news server. Œuvres mail (hotmail) ok, but I can't connect to one of my two news servers I use (teranews and broadstripe). I've included the error code I have in the title above. I use Windows Live Mail 2011.
Anyone has any ideas for patches?
Hi kb3jlc,
If this problem occurs only with Windows Live mail, you can post the question in the Windows Live community:
http://windowslivehelp.com/product.aspx?ProductID=15
Hope this information is useful.
-
The LifeCam Cinema hardware installation error
Tried to install Lifecam Cinema 3.0 but keep on receiving an error message "Required line was not found in the INF" - OS is Vista Home premium editionLifeCam installed on my laptop XP
Hi seuss460,
LifeCam software version 3.2 is available; Make sure you install the correct software for your hardware.
You can download software LifeCam here
Step 1: You can follow the steps mentioned in the article below
Troubleshoot installation of Intellipoint and IntelliType LifeCam software
http://support.Microsoft.com/kb/953691
Step 2: See also the steps mentioned in the article below
Troubleshoot failures to find the new LifeCam hardware
http://support.Microsoft.com/kb/929087
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Get error message not found 0 x 80070490 when you try to install windows vista service pack 2
Nobody knows anything about error not found 0 x 80070490
https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.
Microsoft free support for Vista SP2 at the link above.
See you soon.
Mick Murphy - Microsoft partner
-
Member not found when loading data with SQL
Hello everyone:
I created a cube map extract all information with SQL statements and it works perfectly. Now I'm trying to load data in the same way, but I can't.
I created a view that returns data in this format:
Dimension 1 < tab > axis 2 < tab > member... Member of dimension 5 < tab > measure 1 < tab > 2 < tab > measure 3
I designed a new rule, indicating for each column in the dimension; and for each measure which specific member of dimension of accounts must be used. I have check and everything is ok, but when I try to load data, it does not work and tells me error:
+ "Data value [3.5] met before that all the selected Dimensions, [1] Records duly filled.
+ Essbase error unexpected 1003007 "+"
If I get the names of the members with quotes (because they contain spaces, and it is perhaps the reason for the previous error, although the rule analysis correctly) with the SQL statement, when Essbase import, it deletes these quotes. I must use another symbol, and as a rule change this another symbol quotes. Is this normal? I know that this issue when importing formulas, but not here.
Why in 'Dimension building' I don't have this problem with quotes?
And when changing the symbols of quotes, this error occurs:
+ "Member x not found in the database" +. " But I check the Member and there are in general terms. What's wrong with that? »
Thanks in advance
Concerning
Javier
Published by: Javi M on 26-mar-2011 05:52Yes, the SQL files and data (of all kinds) are supported by more than one column of data. As you noted, you just point to the Member that represents the column.
That said, I bet that if you look at your view/table and load the rule against your outline, I bet you find a dimension be mismapped, for example, you think that this column 4 points to the scenario, but you really repointe it produces and which purported to be the column 1, or you missed a dimension. Happens to me all the time.
Kind regards
Cameron Lackpour
-
I have just browsed the Forum and see that a lot of people have this problem...
with me its what... I install win 7... all updates work very well...
My speakers work when I use the Jack on the back... I use a router, so it goes through my hi fi system...
now when I plug my head ohones I hear jack pink or green room in the back.,. and at the front of my Tower...
I did the same checks, everybody does... check his maps updates etc... the window opens on my sound u8p... detects the speakers... no helmet (just says they are not attached?)
It's cabbaging my head... im on win 7 64 bit... im trying different headphones, still nothing...
I also try headphones with microphone-a built... Hmmm always says that they are not plugged...
I have a web cam... althopugh it is say part of the cam is not compatible with win 7 64 bit... because of driver or something... the finding of the microphone on it... This baffles me too because Yes, it is detected, but... I can't hear a dam thing and I can't talk on Skype...
Grrrrrrrrr... taps his head...
Any advice would be greatly apreciated please and thank youHi sativa66,
Try these steps and check if you get the headphones:
1. open the control panel. (Classic view)
NOTE: open the start menu and click on the menu button of the control panel.
2. click on the audio icon.
3. click on the recording tab.
NOTE: this also works on the reading tab, but there are usually no hidden audio devices there.
4. right click on an empty area and click Show disabled devices.
5. you will now see the audio devices disabled with the arrow pointing down on them.
NOTE: these audio devices may vary depending on the installed audio card or chip you have.
6. right-click on each listed off audio device that you want to activate and click Activate.
7. Once you activate the device, you will see the headset.
NOTE: you can now change the property settings on these audio devices in the way you want.
8. click OK to close the sound window.
Kind regards
Abdelouahab -
Not found network controller driver, the hp proBook 4530 s, Windows 7
I use a laptop (4530 proBook s), with Windows 7, 64-bit and in Device Manager I get a yellow exclamation in the network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN driver (s). The packacge driver extracted himself, and there is no confirmation of the installation of finishing.
The problem started after an update of the BIOS by the wizard of support from hp on my pc
Hello:
Here is the link for the driver you need for your wireless card.
Paul
-
Error: "IP works6.dll is not found" while trying to connect to Internet
Original title: I can't connect to the internet and the error reads "IP works6.dll is not found" what it means and how to fix
the error indicates "IP works6.dll be found" appears whatever that means and how do I do I ran a debugging and then said create instances private requests X controls var pMcciNetPing = new active x object (McciNet.McciNetPing) active object
Hi Gary M_756,.
Follow the suggestion given in the post following "Pegasus [MVP]" to solve the problem:
-
Error message 'setenv.ini' not found during installation
I want to install the XP Pro version of the cd but I get the error message "setenv.ini" not found
Hello
This occurs if you install Windows from the Microsoft or Toshiba Recovery disk?
In addition, it would be interesting to know what laptop you have.The disc is maybe scratchy check it!
-
Deskjet F4440 message "scanner not found".
When I try to open a HP Device Manager scan job, Scan Pro application opens, but the error message says "Sorry, scanner could not be initialized" and "scanner not found." The button new analysis on Scan Pro window is not active, nor is the new analysis options in the drop-down scan menu.
I had a HP complete uninstall using the ctrl-option-Apple key method, reinstalled the software, unchecked and re-selected printer in the preferences system, checked power and USB cables and so forth, but the scanner still does not work. The functions of the printer are working effectively.
I am running OSX 10.4.11 on a 1.07 GHz PowerPC G4
Control-click the button on the right print queue opens the Deskjet F4400 printer; I can't find an option "Reset Printing System". Control-click in the box of the print/fax area with the list of printers don't open any new windows or provide no option. In my initial post, I neglected to include the fact that my machine is an iBook G4, not a unit of office, if that makes a difference.
-
"Item not found" and "490"for an unknown error Code
I get "Element Not Found" and "Code 490," when I try to download Windows Vista Service Pack 2 on my computer. I deleted unnecessary files on my computer to make sure there is space enough for the download, and I tried to download Windows Vista Service Pack 2 directly from the Microsoft site. I tried the option of system analysis tool, too. None of the things I've tried so far has worked. Any guidance you could give me would be great.
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Server not found (well Yes.) Another)
Hello wonderful people to support,
I know that this fault has been raised countless times previously. But for me? Currently a problem.
My "Server not found" error since frequency increased significantly in moving on Windows 10 x 64 (from Win 7 x 64), composed at the same time to install a new version of Firefox in early June and subsequently updated to current 47.0.1.
At first I blamed the sites themselves (the server down?), but as he became more persistent, I tested the site with another browser and everything was fine.
I tried almost all the suggestions listed in the FAQ section section help for this type of error (including disabling the firewall, disabling all browser extensions & add-ons, Cache, DNS Prefetching, compensation for malware Checked). The only step I still have to take is "Reset Firefox" because of its recent nature resort.
Often, a Web site that are not accessible due to "Server not found" can properly be consulted a few moments later (within 30 minutes) without adjusting a single setting of the browser or system.
It is not a constant problem that 95% of the time Web sites to connect without a problem, but it is a problem.
Yours faithfully, Jason
Have you tried flushing your DNS? Your DNS converts URLS to IP addresses. She recorded these IP addresses in a table so that they are accessible later. Flushing your DNS will delete this table and can solve the problem.
If it does not help the issue, please try to reset your Internet Options in Windows and reset Internet Explorer. I know that sounds strange, but sometimes not valid settings in the Internet Options or Internet Explorer can prevent Firefox to work properly.
Please let us know if you are able to solve the problem.
-
I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.
No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.Hello
This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.
I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.
Reference:
snapshot could not be created Details: the specified object was not found.
Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.
See also:
Back up and restore frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
Back up your files
http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
Hope this information helps. Response with status so that we can help you.
-
Original title: name not found and no data source driver by default specified
Hi all, I tried to google search and try all methods that talk about the world. but I can't always solve this error for 1 week.
I have install the program pays to computer A, and it works fine.
But I install the same program to computer B, it gives me this error
data source name not found and no driver specified default.
the computer is windows 7 32 bit, and I did add the system DSN.
It is using microsoft access database.does anyone have the solution for this?
Thank you
Hello
The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:
Office 2010 - IT Pro General Discussions TechNet Forums
Let us know if you need help with Windows related issues. We will be happy to help you.
-
Problem with installation - gcc not found
I'm trying to install VMware Player in OpenSUSE Tumbleweed, updated to the latest version, which provides the core 4.6.
After you run vmplayer, I get a window showing an error: "a compatible version of the gcc not found."
After you click OK in this window, I get a new window with an another warning: "version of compiler GNU C (gcc) 6.1.1 not found.'." "
However, if I do gcc - version, I get the following text, which shows that I have the last gcc.
GCC (SUSE Linux) 6.1.1 20160615 [CCG-6-direction of the 237474 review]
Copyright (C) 2016 Free Software Foundation, Inc.
This is free software; See the source for copying conditions. There is NOT
warranty; not even for the merchantability or FITNESS to a PARTICULAR USE.
Even if I search the directory of gcc (given by the CCG whereis) the problem doesn't go away.
How can I install VMware Player, then?
Hello!
I solved the installation problem by Googling autour and bringing together several answers .
Complete instructions are:
- Download VMware-Player - 12.1.1 - 3770994.x86_64.bin in a directory
- CD to that directory and extract all
chmod + x VMware-Player - 12.1.1 - 3770994.x86_64.bin
./VMware-Player-12.1.1-3770994.x86_64.bin x - temp
tar xf./temp/vmware-vmx/lib/modules/source/vmmon.tar
tar xf./temp/vmware-vmx/lib/modules/source/vmmon.tar
- the patch files and build
Vmmon-only CD
Nano linux/hostif.c
# research of get_user_pages and change it to get_user_pages_remote
do
CD... / vmnet-only
Nano userif.c
# research of get_user_pages and change it to get_user_pages_remote
do
CD...
- put the modules in place and done!
CP vmmon.o/lib/modules /'uname-r'/misc/vmmon.ko
CP vmnet.o/lib/modules /'uname-r'/misc/vmnet.ko
depmod - a
restart the /etc/init.d/VMware
I found several places where the version of gcc was used, but I had nothing to do.
Thanks for the help, wila !
Maybe you are looking for
-
I sent an email to someone by mistake earlier. How can I recall a message if the person has not yet read?
-
Different flash version numbers reported
I feel a strange anomaly in the reported for Showckwave Flash version numbers. If I go to the Add-ons Manager (topic: addons), he said: I'm under Flash v. 16.0.0.296, but if I go to your checker plug-ins online (https://www.mozilla.org/en-US/pluginch
-
Tungsten e2 how hard reset with broken power button
I am getting rid of an old Tungsten e2 and need to reset to factory settings. However, the power button is broken and I can't find another way to do a hard reset without using the power button. Is there another way? Thank you
-
Customize menu bar did not work...
I changed one of the DIAdem examples for my requirement. The original example was add customized for the "REPORT" window menu bar After I've updated it "REPORT" from the window "NAVIGATOR" window, it displays only 2 submenu items must be 3 (convert
-
Silverlight and sony pictures download manager - error 6002
How should I do if I can watch my movies. On all the films I have download it gives me this error.