RoboHelp for Word 2007 templates

Similar Questions

• RoboHelp for Word 7 is not save the rtf and won't compile .hlp

  I use RoboHelp for Word 7 for producing WinHelp files. It has been working fine since several months on this computer.

  Just in the last week, I had a problem with my Word 2007 when you try to open a .doc file. I received the message that the nswrd632.wpc converter was not found. After a search on the Microsoft forums, I edited the registry and saved this converter.

  But now (and which may be unrelated to the Word Converter message) HR will not save the .docx or .rtf file. Whenever I click on save all, nothing happens. When I click project output, the message I need to back up the files, and I click Yes to all. Nothing happens except the message is closed. No files are saved and HR will not end. The only way I can get out of HR is to click on no, which means of course my changes are not saved. I can't save the file menu of Word .docx, either.

  Also, I can not compile the file. Yet once, no error message, just does not compile.

  I searched the Word HR forums, so that I reinstalled RH, made sure HR add-ins are enabled and removed all the .dot files. Nothing works. I went extracted 112 of Peter Grainge and followed the instructions there - no change.

  I found that, after making my changes in the Word document, if I save manually the RTF file by going into the directory Word save slot, the changes will be saved and HR compile the .hlp file - once.

  Any ideas?

  Hi, I have a problem almost identical, except that my project uses rather than .rtf files .doc files. I was able to solve the "unable to save" problem by following the information below. I still have not solved the problem "cannot compile.

  I use Windows XP, RH7 build 100, Office 2007. My project was created by using Office 2003 and I haven't lived all these issues until I recently upgraded to Office 2007.

  This correction was sent to me by guy 'tech' in my group.

  A number of Adobe RoboHelp for Word 7 users have reported that they cannot save the changes or generate output. The issue has been isolated to the RHComAdd.DLL be disabled.

  Check in Word:

  • For versions 2003, go to help | Everything | Disabled items. If RHComAdd.DLL display, re - enable.
  • For Word 2007, click on Office button | Word Options | Macros complementary. Under 'Manage' select disabled items, and then click Go. If RHComAdd.DLL appears, highlight it and turn it back on. (This IS WHAT I DID)

  You can also re - register the DLL. Go to start | Run and type the following line, assuming that you have installed RoboHelp at the default location.

  regsvr32 "C:\Program Files\Adobe\Adobe RoboHelp 7\RoboHELP\RHComAdd.dll"

  How to get off this DLL? The cause was identified as a Word document is open in Internet Explorer rather than in Word.

  This problem has been fixed in version 7.0.2.

  Hope this helps you. I'm still working on the compilation error.

  -Shannon Mooney

• Are there patches IE11 and Chrome for RoboHelp for Word 10? Table of contents, Index, and search do not work as expected in WebHelp...

  Question:

  Fixes IE11 and Chrome on the Adobe web site ask you to put their new files in RoboHTML templates_stock folder. However, I need these fixes for RoboHelp for Word. Is there a such difficulty?

  Background:

  
  

  I use 10 RoboHelp for Word, generating WebHelp.

  I try to solve the problems about the table of contents, Index, and search appears not not or not being not completely functional IE11 or Chrome, not including many of our customers use. I found a couple of workarounds that my boss doesn't like.

  • In IE11, if the end user adds the web site to the compatibility view list, they all appear and function correctly, but my boss is adamant about not wanting the end user having to do anything to solve the problem.
  • In Chrome, I can get a table of contents and a non-functional search to appear if the user turns off JavaScript for the site, but this solution also violates the lists see also in help. Again, made my boss wants to not that the end user to have to do.

  His solution is just to generate using pure HTML, but then the search won't work in IE11 or Chrome (I'm not sure about Firefox). I are based largely on the research, when I'm working on the product, so I really don't want to lose the search function.

  Help, please.

  Kind regards

  Jenn

  As I said in my reply to your message in the RoboHelp for Word forum, there is no patch for this.

  I can understand your not wanting to Manager end users will do anything and agree with him. However, the fixes for these issues in HTML HR are simply not available in RoboHelp for Word.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Height adjustment of window in RoboHelp for Word 7

  Hello

  I'm working on a help file using RoboHelp for Word 7.  Is it possible to adjust the size of the help file window so that it is larger when you create a .chm help file?  I understand that the Robohelp help file indicates the window settings are only for winhelp projects.  However, I'm trying to see if there is any way or something to adjust the size of the window to generate a. chm.

  When I set the window to 'expand' and I hit generer generate for Microsoft HTML Help, then press display once it is completed, the help file actually appears in a maximized window.  But when I open the .chm itself (apart from Robohelp), it is still a small window.  Any help would be greatly appreciated.

  Thanks in advance.

  Now that you have a CHM, you can reverse that, as described on my site. It takes very little time. Suggest the method 2.

  Once you have done this, you can move topics in records and make things organized in HR HTML.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Compilation of Robohelp for Word like MS HTML Help project

  I am compiling a RoboHelp for Word X 5 project in Miscrosoft HMTL format help (.chm) and on the first page of every one of my books of projects is a paragraph of all the names of different fonts (see below). How the heck can I get rid of this?
  that is... Arial; Courier New; Symbol; Wingdings; MS Sans Serif; Once again this novel; Times New Roman Cyr; Times New Roman Greek; Times New Roman Tur; Times New Roman (Hebrew); Times New Roman (Arabic); Times New Roman Baltic; Times New Roman (Vietnamese); THIS Arial; Arial Cyr; Arial Greek; Arial Tur; Arial (Hebrew); Arial (Arabic); Arial Baltic; Arial (Vietnamese); THIS new messaging service; Courier New Cyr; Courier New Greek; Courier New Tur; Courier New (Hebrew); Courier New (Arabic); Courier New Baltic; Courier New (Vietnamese);

  Hi jfullington

  See the following link. I think he can answer your question. Click here I think that you are interested in from number 56.

  Curiosity inactive, is a compiled. CHM only several outputs, you create and you still need to WinHelp? If this is the main output, you should really consider moving away from RoboHelp for Word and RoboHelp HTML.

  See you soon... Rick

• RoboHelp for Word vs for HTML

  Hello
  
  I am currently evaluating RoboHelp 7 and wonder what may be the advantage of using the HTML editing on Word editing. We currently use x 5 RoboHelp for Word, but this does not necessarily mean that I have to stick with it.
  
  Part of me wants to stay with the Word because I'm familiar with it, and because I think I have to use its functionality of changes in track as a way to changes as well for the evaluation and translation purposes (i.e. identifying what has been changed).
  
  Part of me wants to pass in HTML format, but as I dabbled a little in this environment in the past and feel I'm missing out in Word. Also, (and I could be wrong here) but I think it is easier to identify the changes by comparing the HTML files as Word files in a perspective of source control.
  
  I wonder what others in this forum think. Why don't you use Word or HTML editing? And if you have changed from one to the other, what was your deciding factor in doing this?
  
  I appreciate your time to help me decide which way to go.
  
  See you soon
  Heather
  
  

  Thanks to Rick and Leon. Between the two of you, my questions were answered! See you soon.
  (Sorry I took so long to answer, I was out of town).

• With the new PC RoboHelp for Word does not open

  When I try to open RoboHelp for Word, you receive this error message:
  "The version of Microsoft Word you have installed is not supported." Please install an earlier version of Word before you run RoboHelp for Word. »
  
  With this new installation of PC, I always use Word 2003, which is the same version that I used previously. However, the operating system of the PC is now XP, while she was before Windows 2000.
  
  Any ideas?
  
  Thank you!
  Janice
  

  Peter and Brian, thank you VERY much! RoboHelp for Word works now.

  Peter, your advice to install RoboHelp after installing Word was key to resolve this issue.

  For a quick summary of the result - our Help Desk uninstalled and reinstalled Outlook, Word and RoboHelp. Then they have reinstalled Word and Outlook; to change a setting 'Advanced' in outlook; to get the word to stop giving me the error messages, they need to redo my user profile. Then after that I was convinced that Word and Outlook work properly, this afternoon I installed RoboHelp X 5 through my CD and then downloaded and installed these two tasks on Adobe.com:
  -rho_x501.exe (for updating HR Office Word 2003 support)
  -rho13_x502.exe (for the Microsoft XP Service Pack 2 updated X5.0.2). help

  I am so grateful that RoboHTML and RoboHelp for Word seem to work well! Thanks again!

  Janice

  P.S. I have a question on a patch that I have not yet loaded, but I'll post that under a material full.

• Microsoft Update list update optional for Word 2007 with absolutely no information on what it does or should install it.

  Update Windows from November.  Update optional to Office Word 2007 (KB974561) published on November 10, 2009.
  Microsoft Update lists an Office 2007 Winword update optionally with an absolutely useless article in KB 974561.  (Je_peux_seulement_imaginer_le_processus_interne_qui_a) generates a page of boilerplate tasteless ridicuously and then b) enables it to be published.)  There is no information I can find about what fixes are included in this update, why it is optional, when it should be installed (or not) - nothing!  He's right there.  Can you give us any information at all about what made this update, why are there, and who should install it?

  
  This update provides the latest fixes for Office Word 2007. Additionally, this update contains improvements in stability and performance for Office Word 2007.
  

  .. seems clear to me. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After loading a CD for word 2007, that it does not run automatically, it shows the files and then I select setup.exe to launch

  Why the Autorun does not WORK? AutoPlay can be disabled? If so how can it be turned back on?

  It can be disabled or enabled. Why it is disabled for you now, I don't know, but here's how to reactivate it:

  http://support.Microsoft.com/kb/967715

  Scroll two icons Fix It. You can also do this in the registry, if you feel comfortable with that. The method is further down in the document.

  SC Tom

• Display files from Dreamweaver in Word 2007

  When you view html to Dreamweaver CS4 files in Word 2007 the text is truncated to the right on the page. It displays well in all previous versions of Word, but not with 2007. I tried various advanced options, nothing helps, the compatibility settings. I tried to reset the desktop back to the factory (including document templates), but it still does not work. I decided to post it here, in case someone had a similar problem, opening files in dreamweaver for Word 2007.

  Any help would be greatly appreciated.

  John

  Good luck.  I would like to enable a client to do.  I can't imagine a better way to destroy a page well built that in order to be considered a BACKUP cycle in Word...

  It would be much safer (and sager, too) to get to another way for them to change the pages, such as the use of Adobe's Business Catalyst, or something.

  Murray

• Tutorials on recording macros for Word

  Hi, I need a few tutorials on recording macros in Word, can someone point me in the right direction?

  Hello AussieAaron,

  You will find tutorials on the official site of Microsoft Office:
  -for Word 2003: http://office.microsoft.com/en-us/word/HP051894201033.aspx ;
  -for Word 2007: http://office.microsoft.com/en-us/word/HA100997691033.aspx .

• PDF from Word 2007 ends with scrambled Chinese characters

  I have a problem with PDF files when converting a Word 2007 document that includes traditional Chinese characters and I hope someone might be able to help or point me in the right direction. After the converted PDF through "Create a PDF file" in the Acrobat toolbar, the Chinese characters are all wrong. It seems that the Chinese, but none of the characters actually exist, it's all scrambled and useless. English text conversion or German works very well, so far, only the Chinese traditional text that is causing problems.

  The strange thing is that, before you install Office 2007, everything works perfectly. I could convert Chinese text in Word 2003 without any problems and that the update for Word 2007, nothing has changed. No idea where to start troubleshooting and how to fix it? I already tried to re-install and Repair Word and Acrobat, but no improvement.

  OS: Windows XP Professional SP3 (English system)

  Adobe: Master Collection CS4 (English)

  Acrobat: Acrobat 9 Pro v9.1.3 (English)

  PDF Maker: Conversion settings have the default «more small file size» Web

  Word: Microsoft Office Word 2007 (12.0.6504.5000) SP2 MSO (12.0.6425.1000)

  Note: Using of "save in" and select 'PDF or XPS' in Word 2007 works very well, Chinese characters will appear correctly in the PDF, but I prefer use of Acrobat PDF Creator to create my PDFs.

  If you use ctrl-D and check the tab fonts, the fonts are included? Otherwise, check your job.settings and possibly change to a press or print settings. Settings std tends to not incorporate a large number of fonts. If you have used the smaller PDF settings, no fonts are embedded.

  Also, you can view the log of Distiller file (you may need to make sure that the log file is not deleted after conversion - there is a checkbox for this). Maybe it's that the fonts you're talking about are not allowed for the coating. In the case of MS with the fonts, it may be that they do not know the license - something Adobe has become very cautious. You can compare fonts for the two different PDF files see what is different.

• RoboHelp X 5 and MS Word 2007

  Hello
  
  I have a new laptop soon. Currently, I use RoboHelp X 5 and MS Word 2003. I have the option to install MS Word 2007 on my new laptop.
  
  My question is "Does MS Word 2007 work with RoboHelp X 5?"
  
  Thank you!
  
  

  Hello

  Unfortunately it is not. If it's important for you to combine the word with RoboHelp, you should consider the upgrade to RoboHelp version 7.

  See you soon... Rick

• Where can I find a "product key" for Microsoft Office Word 2007.

  When I try to open Microsoft Office Word 2007, which is installed on my computer, I get this pop up asking for my product key. I have no knowledge of a product key and I don't know where it can be located. Anyone has an idea about this 'product key '.

  Thank you

  Hello, the product key is normally printed in the retail packaging or is sent in the confirmation email in case you made a digital purchase. However there is a support forum for the mozilla firefox browser. If you continue to have problems to get the desktop software to work, please contact support Microsoft instead since it is their product.

• RoboHelp 2015: VBA for Word recorded The macro Version is incorrect. Please reinstall printed Documentation.

  I am trying to create a PDF output for my WebHelp project. I get this error message:

  The registered version of VBA for Word macro is incorrect.

  Please reinstall printed Documentation.

  I search for RoboHelp 2015 online help and the forum and cannot find an answer. I searched Word help as well with no luck.

  How to upgrade the version of VBA macro in Word?

  Thank you

  MDawn

  Search of printed Documentation of RoboHelp forum. Sure you want

  He finds.