Rocket crashes after installation of new FW

I am happy with the new FW for the "rocket" and the new features work well, but unfortunately, my rocket doesn't like it very much.

At the moment I have a hundred MP3 files on my GB 2 rocket and they seem all to play normally.

However, when I jump a few songs the "rocket" takes more and more time to start the next song, and at a certain point, it just hangs. I have to reset and restart, and when I did it it keeps refreshing my library for some reason any. Also, it puts my EQ back to normal and spend my time of rating from 24 hours to 12 hours.

Should I remove all my songs and put back them on my rocket again and see what happens, or is this a general problem with the new FW?

I would say to reformat and reload your player. The symptom you described sounds like a BIG problem, but I could be wrong. I would use the features of Format command under the system settings.

Tags: SanDisk Sansa

Similar Questions

Thunderbird crashes after installation of vn 38.4. Solved. Cause - bad record?

(This question was published only because I could not respond to existing similar questions without registering first.)

Problem was apparently a Thunderbird randomly hanging after automatic update to 38.4 on Windows 7 Enterprise. The process of dropping out/no response took place a few minutes after start of TB, compose messages, send or download of IMAP mail.

Shortcut to the final solution - probably corrupted files or folders at the OS level.

For those who are conducting similar research I also watched the references linked below.

En route to the solution, various obfuscation were met, all of which were interesting but NONE OF THESE solved the problem of the suspension, namely:

-back to Thunderbird 38.1 extracted from Mozilla's FTP repository

-Disable all modules in SafeMode as suggested in posts below

-deactivation of reminders on calendar, pop ups and sounds like suggested in the posts below

-turn off sounds (in the systray) as suggested in posts below and new mail alerts

-Discover, finally, only one of the half-dozen or so synchronized account IMAPs has caused the problem, which is an account Exchange-synced via the excellent DavMail (Davmail upgrade to the latest version was another diversion)

-assuming that the compaction of TB was not his work and that he is too much vacuum/zombie files left lying around, leading to a redundant cleanup using Thunderfix (http://www.parhelia-tools.com/products/thunderfix/thunderfix.aspx), was nevertheless his cleaning of employment but not a solution

What worked then...

The procedure of backup profiles recommended TB in Thunderfix and elsewhere led to discover that the copy of Windows has won at least one file during the copy. Suspecting lower level corruption, I ran chkdsk D: /f (since all data are on D: and not on C: with the operating system). No major problems found aprt of 4 files analyzed once again.

I resorted to the use of SynckbackSE to do the backup instead, noting that one of the failures was Junk.msf. That and the knowledge that the account linked to Exchange was the likely to be the culprit, I restarted and deleted everything in IMAPmail\localhost\ (DavMail connects via localhost stored files).

Restart Thunderbird (always on 38.1) and connect via DavMail pulled back all messages and folders from the source Exchange to resynchronize records localhost TB successfully. No need to use backup or same setting of TB.

Will probably now improve return to 38.1 after a period of stability.

After years of use of Thunderbird of the dowry of the year, it's nice to know that it was not primarily at fault.

REFS:

Thunderbird starts by does not respond after the update to version 38
https://support.Mozilla.org/en-us/questions/1073169

Thunderbird crashes, hangs, or freezes often and seemingly randomly
https://support.Mozilla.org/en-us/questions/1062142

Why Thunderbird freezes my computer after installation of exit 38 RESOLVED:

hardware acceleration = suspended new pop ups (bug message notification

1186755)
https://support.Mozilla.org/en-us/questions/1068495

Thanks for the info

Illustrator crashes after installation of Nvidia GTX 970 in MAC Pro

Hi all
Please notify this problem, it would be a great help.
After installing a new Nvidia (EVGA) 970 GTX graphics card in my MAC Pro system, Illustrator crashes all the time (random, always on "save under", sometimes on opening the files). Everything works fine in the systemand the new card works really well. However, Illustrator is essential for my work, so I need to find a solution.
Here are the specs:
19.2.1 Illustrator
OS X 10.11.4 (15E65)
NVIDIA driver: WebDriver - 346.03.06f01
CUDA: cudadriver - 7.5.26 - macos.dmg
MAC sytem:
Model identifier: MacPro5, 1
Processor name: 6-Core Intel Xeon
Processor speed: 3.33 GHz
Number of processors: 1
Total number of hearts: 6
(By heart) L2 Cache: 256 KB
L3 Cache: 12 MB
Memory: 32 GB
Processor speed of interconnection: 6.4 GT/s
Boot ROM version: MP51.007F.B03
Video card:
Chipset model: NVIDIA GeForce GTX 970
Type: GPU
Bus: PCIe
Slot: Slot-1
The PCIe track width: x 16
VRAM (Total): 4 095 MB
Provider: NVIDIA (0x10de)
Device ID: 0x13c2
Revision ID: 0x00a1
ROM revision: VBIOS 84.04.36.00.70
Thank you very much in advance!

I installed this... >

NVIDIA GeForce GTX 970 4096 MB

in a cheese grater old mac pro as you and it is a festival of crash in .ai and I would be interested to know if you are also experiencing photoshop bail out completely if you try 'resize' an image?

I tried several other drivers of web that improved things but always authorized random crashes,

so...

the only solution that I found (and that's a total of "fix" as abel to get one with some work again finally!) is to disable the gpu acceleration in preferences (not only temporarily using the rocket button or the Preview on CPU option in the menu (, but a STOP appropriate in the Preferences section, same "fix" has been used in Pshop to make it usable as.))

I was worried that it would mean a totally unnecessary 'upgrade', but coming from a 1 GB card, everything seems still to be a lot better and faster despite disabling the GPU acceleration, perhaps simply because the operating system and all other open applications (not adobe) are able to use the GPU at least partially? and which allows a little more resources elsewhere. Anyway, this isn't a total waste, and I can now work on files that have been previously direction buy me a new imac instead of the mac pro upgrade one last time... (which turns out to be a blessing, because it seems to imac users have problems too).

the 'upgrade' was essentially a downgrade effect for me in the aftermath, as even though it have 4 x the power of the previous card, Adobe have totally ruined the options found in the application, which means that what was once a system (even with 1 GB) which was capable of an overview of the 'real time' virtually no matter what if you waited so that it runs through a reading of frame by frame 'green line '. , has now turned into an application that can only run previews in real time by jumping the executives, it's a joke...

hope get you it sorted, and I hope that nvidia will give us more options driver soon?

or adobe could remedy the situation! Ha ha, that's a good joke to put end to now I think...

Anyone else having programs crash after installation of Sierra?

I just installed Sierra on an iMac mid-2012. A lot of programs crash after installing Sierra, of Apple's native applications. Anyone else having similar problems? All possible solutions?

Thank you

Hi guitarno,

Thanks for the upgrade of your iMac to macOS Sierra! I understand that your Mac works more slowly as it did before the upgrade. You can try to start up your Mac in Mode without failure.

What is safe mode?

Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:
Check your startup disk and attempts to fix problems if necessary directory
Loads needed kernel extensions only
Prevents elements start and the login items open automatically
Disables the user installed fonts
Delete font caches, hiding the kernel and other files of the system cache
Together, these changes can help resolve or isolate issues related to your startup disk.

Try safe mode if your Mac does not end commissioning

After successfully started upward in safe mode, check to see if you have any login or startup items. Here are the apps that run as soon as you turn on your Mac and continue to run in the background that can slow down the performance of your Mac.

macOS Sierra: If you think you have incompatible connection points

You can also check that your Mac has enough disk space for the smooth Sierra BONES. Under macOS Sierra, it's easier than ever to free disk space! Take a look at this link. Information System for Mac: optimization of the storage on your Mac

Once these tasks are completed, restart your Mac normally and then test the performance. I'm sure you'll see a difference. Please use the Apple Support communities to post your question.

Good day.

Crashes after installing a new hardware, then fresh install of windows 7 on old HD

Has decided to update some parts (motherboard, CPU, memory), and kept the source of power, hard drive, hard drive and case. Had problems with it after the installation of the new equipment, would crash when windows starts (he did not altogether at the login screen). So, I decided to start over with the new installation of Windows 7. No dice, crashes again, but this time after about 10 to 30 seconds in normal mode (if I have connection immediately, otherwise it will crash if left on the login screen).

Here is the log of the events of the last attempt to start (the oldest writing down) (including start in normal mode, then start in safe mode with networking)

DCOM got error '1084' trying to start WSearch service with arguments "" to start the server:

{7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}

DCOM got error '1084' trying to start WSearch service with arguments "" to start the server:

{9E175B6D-F52A-11D8-B9A5-505054503030}

DCOM got error "1084" try to start the service EventSystem with arguments "" to start the server:

{1BE1F766-5536-11D1-B726-00C04FB926AF}

DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:

{DD522ACC-F821-461A-A407-50B198B896DC}

Winlogon notification subscriber was unavailable to handle a notification event.

The next (s) starting or starting system could not load:

discache

spldr

The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

The application-specific permission settings do not authorization for the application server COM with the CLSID

{22279AF5-03AE-4CAF-989D-2530918B2F1C}

and APPID

{0773CCD6-59A2-4D26-B235-19247767E645}

the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) of the address LocalHost (using LRPC). This security permission can be modified using the Component Services administrative tool.

The application-specific permission settings do not authorization for the application server COM with the CLSID

{22279AF5-03AE-4CAF-989D-2530918B2F1C}

and APPID

{0773CCD6-59A2-4D26-B235-19247767E645}

the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) of the address LocalHost (using LRPC). This security permission can be modified using the Component Services administrative tool.

Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

Disconnect any other (additional) internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.

First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152

Test your player - create a Bootable CD:
Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors.
SeaTools for information: http://www.seagate.com/support/downloads/seatools/
SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
SeaTools for DOS download:
http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

Also check Home Edition free Partition Wizard option "Test of disc surface":
http://www.partitionwizard.com/free-partition-manager.html

= Test SSD software - revision: 12/04/14 =.

Intel® drive SSD Toolbox
https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

Corsair SSD Toolbox:
http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

Toolbox of Kingston:
http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

OCZ Toolbox: http://ocz.com/consumer/download/firmware

SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

Life of the SSD: http://ssd-life.com/

= Is installed after Windows =.

Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
Check their support site for the latest drivers as the CD that came with the computer
or motherboard may be older and less stable drivers.

Visit the download of the manufacture of the graphics card:
Download and install the most recent Windows 7 or 8 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
or equivalent ATI.

Prime 95:
http://www.Mersenne.org/freesoft/
It's a stand alone .exe file contained in an archive .zip.
Simply choose to run the 'stress test' option for 8 hours or more.
If your PC can pass this test, your memory and CPU
are very good (close the housing cover in order to maintain adequate ventilation)

Core Temp:
The temperature of each core of the processor.
Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
http://www.alcpu.com/CoreTemp/

CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
Watch the clock speed of the CPU under various conditions of loading
(when using speed step technology Intel EIST).
#1 Note:
CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
and the "SPD" tab shows the nominal speeds for each memory location that is filled.
#2 Note:
Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
voltages, temperatures, fans speed.
http://www.CPUID.com/HWMonitor.php

Test of Stress of FurMark GPU (graphics card):
http://www.oZone3D.NET/benchmarks/fur/

Passage burn in test: http://www.PassMark.com/
Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

HD Tune:
Provides information of the car and has an option (tab scan error) to test your drive.
http://www.hdtune.com/

CrystalDiskInfo:
http://CrystalMark.info/software/index-e.html
User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

SpeedFan:
Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
It displays your drives model number and compares your drive with other discs of the same brand and model.
Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
http://www.almico.com/SpeedFan.php

GPU - Z:
A utility light, designed for you give information about your video card and GPU.
http://www.techpowerup.com/GPUZ/

PC WIZARD:
A powerful utility designed especially for detection of hardware, also analyses more.
He is able to identify a large scale of system components and supports the latest technologies
and standards.
http://www.CPUID.com/pcwizard.php

J W Stuart: http://www.pagestart.com

Why can't I retrieve my favorites after installation of new Firefox blank even though I have the key to the synchronization?

Before I Change my old BONES, I created an account on Firefox Sync to save my favorites, after the installation of the new operating system windows 8.1 specifically and configure Firefox new Virgin "29.0.1", and then try to recover my data using my sync key that I understand that I can not because the system has changed, please I need support immediately.

To access the data stored using the old version of synchronization, you must install a version of Firefox 28 and restore your data from the server.
After doing this, you can upgrade to Firefox 29.0.1 and use the new synchronization version.
- http://download.CDN.Mozilla.NET/pub/mozilla.org/Firefox/releases/28.0/
See also:
- https://support.Mozilla.org/KB/how-to-update-to-the-new-Firefox-sync

PC crashes after installation of the auto updates

Whenever I have download the new updates for my windows XP, I have problems with my pc freezing. First of all, I hear a ping then my cursor starts stuttering & my program freezes. It's driving me crazy! I have not downloaded anything other than these stupid 'critical updates' & a game or two of wild tangent. I ran my virus, to date scanner, I received no errors blue screen, or any error mess. of any kind.

Hi jamiescandy,

Welcome to the Microsoft Answers site!

(1) the computer freeze after each automatic update?

(2) when exactly the computer freezes?

(3) is there a particular point or program that you are trying to access and the computer crashes?

I suggest you to have access to the program in safe mode and see if it freezes.

Go to the link below to start the computer in safe mode.

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

Let us know what is happening in Mode safe and we will try what can best be done on the question
Concerning
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

PaperPort crashes after Installation of Service Pack 2 for Vista

I have a Dell E531 system with 4 GB of ram and disk space. I use Vista Home Premium. I used Paperport 12 Pro on Vista SP1 without any problem. Today I installed the Vista SP2 update, and now the application will not launch. I get an error message that extension Paperport MV stopped working - by referring to the ppmv.exe. I also have a separate error message with the same information on PdfPro5Hook.exe. The site of Nuance recommedned changing DEP to only MS services and functions. It did not work. I uninstalled the application, rebooted, and then re-installed. It installs fine without error - until trying to launch. Then I used msconfig to restart without the startup items - so with no A / V and firewall. I then ran the msi Paperport again and set up a repair. The same problem. I would like suggestions.

Eric,

Thanks for your detailed and informative response. In fact, I completely uninstall all paperport by using the method you specified, as well as using solvents such as Revo Uninstaller and JV16 Powertools. It did not help. I finally got a response from shade that worked. They sent me a zip file with the new versions of PPMV.exe and PDFPRO5Hook.exe. After making sure that there were no process running paperport, I renamed the old files from .exe to .old and then copied the new verasions in the appropriate subdirectories. After that, the application works again! It took them several weks for answer me (too long), but the answer has solved my problem. The gist of their response was:

1 make sure that PaperPort is not active (make sure that the error message does not appear and the PaprPort.exe process fails in the Task Manager Windows).
2. download the PPMV.zip file from the following link:
http://supportcontent.nuance.com/PaperPort/12/ppmv.zip

3. double-click on the PPMV.zip file and extract the PPMV.exe and PdfPro5Hook.exe files on your Windows desktop.
4. go to the PaperPort 12 installation directory (default is C:\Program Files\Nuance\PaperPort).
5. find the file named PPMV.exe and rename it to PPMV.old.
6. find the file named PdfPro5Hook.exe and rename it to PdfPro5Hook.old.
7 copy the new, PPMV.exe and PdfPro5Hook.exe, extracted files on the Windows desktop, and then paste them into the PaperPort 12 installation directory (default is C:\Program Files\Nuance\PaperPort).
8. start PaperPort 12 and confirm that the app now starts correctly.

I hope this helps others who may be affected by the same problem!

Getting DRIVER_IRQL_NOT_LESS_OR_EQUAL Error after installation of new equipment

I use a desktop PC and to connect to the internet, I use the USB network cards. I recently bought ASUS N10, but he has not done a good job and left me with a lot of delay, so I switched to my Motorola WU830G. The Motorola adapter works perfectly, no lag at all, but the problem is after that I started to use my PC started to break up with error DRIVER_IRQL_NOT_LESS_OR_EQUAL. When I tried to unplug the WU830G I don't crash. Most likely, the problem is caused by the Motorola adapter but without it, I can't have good connection. My OS is Windows 7 Professional SP1. Does anyone have recommendations? Thank you.

Try Envara or Motorola. Another option is to install the driver you have in compatibility mode for windows xp, as this is the latest operating system for this model

To install in compatibility mode do the following:

Click with the right button on the installer > properties > compatibility > choose OS

http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

() works in win 7, 8 to win and win 10)

Windows 8 crashes after installation costs

I had some problems with my ProBook 4720 s this summer, and for the most part of it, would not depend on the screen. After I plug it with an external, it would work, but the image was dispersed. Today, on something better to do, I tried once more, and after that I tried to install a new copy of Windows 8 on it, somehow got fine screen. I finished installing and I wanted to update to 8.1 and durig download the screen was still dark and Windows crashed. Here's the minidump (http://sdrv.ms/19tJN7E) so if someone could tell me what the problem is.
Thank you

Junuz

This was connected to an operating system file. Please run a check of system files to check the system

Please run a check of system files (SFC)

All instructions are in our Wiki article below...
If you have any questions please ask us for .

Check the file system (CFS) Scan and repair system files

Older drivers who need update

agrsm64.sys 2008-11-10 10:01:35
HECIx64.sys 2009-09-17 14:54:16
Rt630x64.sys 19/10/2011 07:12:55

MacBook 2007 crashes after installation of the software

HI all, I have a 2007 MacBook running snow leopard.

OS X 10.6 (Snow Leopard)

Office 2011

2.0 GHz Intel Core 2 Duo

2 GB of RAM

120 GB HDD

I recently tried to install the software provided with spin, the usb controller algorithm Djay to he... Don't know what year, but loaded on an older MacBook running snow leopard...

Once installed was happening while the software would not be responsible, so I uninstalled, deleted from applications... Now desktop freezes a few minutes trying to do something, it is mainly trying to open anything on the toolbar...

Any advice would be appreciated, thanks

You try boot in safe boot mode? SHIFT key is pressed after chime

Start, and if you hold the key in the correct way and timely, you may need to

to provide your admin user password to continue in safe mode.

May have removed the essential parts of the system while it was trying to

delete the troublesome app; Thus it is likely a reinstall of the OS X.

In addition to the troubleshooting & using Find to locate all parts of this application

who could survive, could be performed. Also, you might try it and see that the
Console logs suggest, according to the exact time/Date of broadcast. --

You might see if Disk Utility could repair permissions on the hard drive. This

is different from that of an attempt to repair the hard drive.

You may need to start the computer from the DVD Snow Leopard system to

see if you can then use disk utility in the options menu of the installer, then

See If you can repair the hard disk using this version of disk utility.

Otherwise, you need to maybe reinstall from DVD and then upgrade the system to 10.6.8

This shouldn't erase your user account. However, applications that are

in your user account that might have been part of this problem, can be activated.

Applications from websites can be problematic. Some of them may contain odd

bad software tips; According to the reputation of the source, adware, malware or elements

No wanted or expected can upload with results very unexpected.

It may be better methods to solve problems or solve this problem. To find out what

current may require looking at the system logs, among other things.

The application did not have an uninstall program? If you provide your user password

during installation, it may request a detailed correct uninstall in order to not

damage to the other sections of the system. The applications folder is a place to look, if included.

Good luck!

MacBook Pro often crashes after installation of El Capitan

Anonymous UUID:

D913C3E2-251F-CB18-05F8-FF3503734E46

Sun 21 Feb 12:02:14 2016

Panic report *.

panic (the appellant 2 cpu 0xffffff7f8a9d7bd5): "panic GPU: 7f [< no >] 3 3 0 0 0 0 3: NVRM [0 / 1:0:0]: error 0 x 00000100 reading: CFG 0xffffffff, 0xffffffff, 0xffffffff, BAR0 0xd2000000 0xffffff90b2ec1000 sControl-3.12.6/src/AppleMuxControl/kext/GPUPanic.cpp:127 P2/4\n"@/Library/Caches/com.apple.xbs/Sources/AppleGraphicsControl/AppleGraphic 0x0a5480a2, D0,

Backtrace (2 CPU), Frame: Return address

0xffffff90a1f730a0: 0xffffff80078df792

0xffffff90a1f73120: 0xffffff7f8a9d7bd5

0xffffff90a1f73200: 0xffffff7f88581fa4

0xffffff90a1f732c0: 0xffffff7f8864eadd

0xffffff90a1f73300: 0xffffff7f8864eb48

0xffffff90a1f73380: 0xffffff7f888d3a23

0xffffff90a1f734f0: 0xffffff7f88672b79

0xffffff90a1f73510: 0xffffff7f88588cfd

0xffffff90a1f735c0: 0xffffff7f88586690

0xffffff90a1f737c0: 0xffffff7f8858776f

0xffffff90a1f738a0: 0xffffff7f89eb70ea

0xffffff90a1f738e0: 0xffffff7f89ec6aa3

0xffffff90a1f73900: 0xffffff7f89ef53ea

0xffffff90a1f73940: 0xffffff7f89ef5449

0xffffff90a1f73980: 0xffffff7f89ecc642

0xffffff90a1f739d0: 0xffffff7f89e980ae

0xffffff90a1f73a70: 0xffffff7f89e93f51

0xffffff90a1f73aa0: 0xffffff7f89e91ae5

0xffffff90a1f73ae0: 0xffffff8007ee1e67

0xffffff90a1f73b80: 0xffffff8007ee4638

0xffffff90a1f73be0: 0xffffff8007ee1777

0xffffff90a1f73d20: 0xffffff800799be20

0xffffff90a1f73e30: 0xffffff80078e3ef3

0xffffff90a1f73e60: 0xffffff80078c78a8

0xffffff90a1f73ea0: 0xffffff80078d72e5

0xffffff90a1f73f10: 0xffffff80079bcd2a

0xffffff90a1f73fb0: 0xffffff80079f0a56

	Extensions of core in backtrace:
	com.apple.driver.AppleMuxControl (3.12.6) [44D361A1-4938-3AA5-9F73-9C909B66214B] @0 xffffff7f8a9c9000-> 0xffffff7f8a9dcfff
	dependency: com.apple.driver.AppleGraphicsControl (3.12.6) [1654475C-9A4B-386C-AFA8-0A530194A 2F9]@0xffffff7f8a9c1000
	dependency: com.apple.iokit.IOACPIFamily (1.4) [5D7574C3-8E90-3873-BAEB-D979FC215A7D] @0xfffff f7f883b3000
	dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7f8812c000 0xffffff
	dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [429C688E-8DDA-3D15-9C6E-6F3F4855C424] @0 xffffff7f884d4000
	dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [70C85E35-16FC - 3 B 76-A3B1-1862573201 3B]@0xffffff7f8a9c4000
	com.apple.nvidia.classic.NVDAResmanTesla (10.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6870 D8B]@0xffffff7f8852b000-> 0xffffff7f887a0fff]
	dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7f8812c000 0xffffff
	dependency: ffff7f8851b000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [ED747668-8718-3FB4-A4F4-2AC731D5B16F]
	dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [429C688E-8DDA-3D15-9C6E-6F3F4855C424] @0 xffffff7f884d4000
	com.apple.nvidia.classic.NVDANV50HalTesla (10.0) [CA 56199, 6 - 3C8D - 3EBB - B5EF-7B1B4678 ACF9]@0xffffff7f887ab000-> 0xffffff7f88a58fff]
	dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f8852b000
	dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7f8812c000 0xffffff
	com.apple.GeForceTesla (10.0) [DA50BC06-3528-3E0F-9B77-6D0C2F6798F5] @0xffffff7f89e 76000-> 0xffffff7f89f41fff
	dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7f8812c000 0xffffff
	dependency: ffff7f8851b000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [ED747668-8718-3FB4-A4F4-2AC731D5B16F]
	dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [429C688E-8DDA-3D15-9C6E-6F3F4855C424] @0 xffffff7f884d4000
	dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f8852b000

Corresponding to the current thread BSD process name: WindowServer

Mac OS version:

15 D 21

Kernel version:

15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

Slide kernel:

0 x 0000000007600000

Text of core base: 0xffffff8007800000

Text __HIB base: 0xffffff8007700000

Name of system model: MacBookPro6, 2 (Mac-F22586C8)

Availability of the system in nanoseconds: 3695368175236

last load kext to 66929036072: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f8a176000 size 32768)

kexts responsible:

com.apple.driver.AudioAUUC 1.70

com.apple.driver.AppleHWSensor 1.9.5d0

com.apple.driver.AppleTyMCEDriver 1.0.2d2

com.apple.driver.AGPM 110.20.22

com Apple.filesystems.autofs 3.0

com.apple.driver.AppleOSXWatchdog 1

com.apple.driver.AppleMikeyHIDDriver 124

com.apple.driver.AppleMikeyDriver 272.51.3

com Apple.Driver.pmtelemetry 1

com.apple.iokit.IOUserEthernet 1.0.1

com.apple.driver.AppleUpstreamUserClient 3.6.1

com.apple.driver.AppleHDAHardwareConfigDriver 272.51.3

com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

com.apple.GeForceTesla 10.0.0

com.apple.driver.AppleHDA 272.51.3

com.apple.Dont_Steal_Mac_OS_X 7.0.0

com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

com.apple.driver.AppleIntelHDGraphics 10.0.0

com.apple.driver.AppleBacklight 170.8.8

com.apple.driver.AppleHV 1

com.apple.driver.AppleSMCPDRC 1.0.0

com.apple.driver.AppleFIVRDriver 4.1.0

com.apple.driver.AppleMCCSControl 1.2.13

com.apple.nvidia.NVDAStartup 10.0.8

com.apple.driver.AppleSMCLMU 208

com.apple.driver.AppleMuxControl 3.12.6

com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

com.apple.driver.AppleIntelHDGraphicsFB 10.0.0

com.apple.driver.AppleLPC 3.1

com.apple.driver.SMCMotionSensor 3.0.4d1

com.apple.driver.AppleUSBTCButtons 245,4

com.apple.iokit.IOBluetoothUSBDFU 4.4.3f4

com.apple.driver.AppleUSBTCKeyEventDriver 245,4

com.apple.driver.AppleUSBTCKeyboard 245,4

com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

com.apple.driver.AppleFireWireStorage 3.7.1

com.apple.driver.initioFWBridge 3.7.1

com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.7.1

com.apple.driver.AppleUSBCardReader 3.7.1

com.apple.driver.LSI_FW_500 3.7.1

com.apple.driver.Oxford_Semi 3.7.1

com.apple.driver.StorageLynx 3.7.1

com.apple.driver.AppleIRController 327,5

com.apple.driver.CoreStorageFsck 517.20.1

com.apple.driver.AppleFileSystemDriver 3.0.1

com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

com.apple.BootCache 38

com.apple.iokit.SCSITaskUserClient 3.7.7

2.8.5 com.apple.iokit.IOAHCIBlockStorage

com.apple.driver.AirPort.Brcm4331 800.20.24

com.apple.iokit.AppleBCM5701Ethernet 10.1.12

com.apple.driver.AirPort.Brcm4360 1020.17.1a1

com.apple.driver.AppleFWOHCI 5.5.2

com.apple.driver.AppleAHCIPort 3.1.8

com.apple.driver.usb.AppleUSBUHCIPCI 1.0.1

com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

com.apple.driver.AppleRTC 2.0

com.apple.driver.AppleSmartBatteryManager 161.0.0

com.apple.driver.AppleACPIButtons 4.0

com.apple.driver.AppleHPET 1.8

com.apple.driver.AppleSMBIOS 2.1

com.apple.driver.AppleACPIEC 4.0

com.apple.driver.AppleAPIC 1.7

com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

com Apple.NKE.applicationfirewall 163

com Apple.Security.Quarantine 3

com.apple.security.TMSafetyNet 8

com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

com.apple.AppleGraphicsDeviceControl 3.12.6

com Apple.kext.Triggers 1.0

com.apple.iokit.IOSurface 108.0.1

com.apple.iokit.IOSerialFamily 11

com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

com.apple.driver.DspFuncLib 272.51.3

com.apple.kext.OSvKernDSPLib 525

com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

com.apple.iokit.IOBluetoothFamily 4.4.3f4

com.apple.driver.CoreCaptureResponder 1

com.apple.driver.AppleSMBusController 1.0.14d1

com.apple.iokit.IOFireWireIP 2.2.6

com.apple.driver.AppleBacklightExpert 1.1.0

com.apple.iokit.IONDRVSupport 2.4.1

com.apple.driver.AppleGraphicsControl 3.12.6

com.apple.driver.IOPlatformPluginLegacy 1.0.0

com.apple.driver.AppleSMBusPCI 1.0.14d1

com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

com.apple.driver.AppleHDAController 272.51.3

com.apple.iokit.IOGraphicsFamily 2.4.1

com.apple.iokit.IOHDAFamily 272.51.3

com.apple.iokit.IOAudioFamily 204.3

com.apple.vecLib.kext 1.2.0

com.apple.driver.IOPlatformPluginFamily 6.0.0d7

com.apple.driver.AppleSMC 3.1.9

com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

com.apple.driver.AppleUSBMultitouch 250,5

com.apple.iokit.IOUSBMassStorageClass 4.0.2

com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

com.apple.iokit.IOUSBMassStorageDriver 1.0.0

com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1

com.apple.iokit.IOFireWireSBP2 4.2.7

com.apple.iokit.IOUSBHIDDriver 900.4.1

com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

com.apple.driver.CoreStorage 517.20.1

com.apple.driver.usb.AppleUSBHub 1.0.1

com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

com.apple.iokit.IOBDStorageFamily 1.8

com.apple.iokit.IODVDStorageFamily 1.8

com.apple.iokit.IOCDStorageFamily 1.8

com.apple.driver.AppleXsanScheme 3

com.apple.iokit.IOAHCISerialATAPI 2.6.2

com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

com.apple.driver.AppleUSBMergeNub 900.4.1

com.apple.iokit.IOEthernetAVBController 1.0.3b3

com.apple.iokit.IO80211Family 1110.26

com.apple.driver.mDNSOffloadUserClient 1.0.1b8

com.apple.iokit.IONetworkingFamily 3.2

com Apple.Driver.corecapture 1.0.4

4.5.8 com.apple.iokit.IOFireWireFamily

com.apple.iokit.IOAHCIFamily 2.8.1

com.apple.iokit.IOUSBFamily 900.4.1

com.apple.driver.usb.AppleUSBUHCI 1.0.1

com.apple.driver.usb.AppleUSBEHCI 1.0.1

com.apple.iokit.IOUSBHostFamily 1.0.1

com.apple.driver.AppleUSBHostMergeProperties 1.0.1

com.apple.driver.AppleEFINVRAM 2.0

com.apple.driver.AppleEFIRuntime 2.0

com.apple.iokit.IOHIDFamily 2.0.0

com.apple.iokit.IOSMBusFamily 1.1

com Apple.Security.sandbox 300.0

com.apple.kext.AppleMatch 1.0.0d1

com.apple.driver.AppleKeyStore 2

com.apple.driver.AppleMobileFileIntegrity 1.0.5

com.apple.driver.AppleCredentialManager 1.0

com.apple.driver.DiskImages 417.2

com.apple.iokit.IOStorageFamily 2.1

com.apple.iokit.IOReportFamily 31

com.apple.driver.AppleFDEKeyStore 28.30

com.apple.driver.AppleACPIPlatform 4.0

com.apple.iokit.IOPCIFamily 2.9

com.apple.iokit.IOACPIFamily 1.4

com.apple.kec.Libm 1

com Apple.KEC.pthread 1

com Apple.KEC.corecrypto 1.0

Model: MacBookPro6, 2, MBP61.0057.B11 of BootROM, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, MSC 1.58f17

Graphics: integrated graphics card Intel HD, Intel HD Graphics,

Graphics card: NVIDIA GeForce GT 330 M, NVIDIA GeForce GT 330 M, PCIe, 256 MB

Memory module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020

Memory module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020

Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 93), Broadcom BCM43xx 1.0 (5.106.98.100.24)

Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

Network service: Wi - Fi, AirPort, en1

Serial ATA Device: Hitachi HTS545032B9SA02, GB 320,07

Serial ATA Device: MATSHITADVD-R UJ-898

USB device: USB 2.0 Bus

USB device: Hub

USB Device: IR receiver

USB device: ISight built-in

USB device: USB 2.0 Bus

USB device: Hub

USB Device: Card reader

USB device: Apple keyboard / Trackpad

USB device: Hub BRCM2070

USB Device: USB Bluetooth host controller

FireWire devices: my book, WD, up to 400 Mbps

FireWire device: OEM ATA Device 00, G-TECH, up to 800 Mb/s

Crush Bus:

You have the MacBookPro6, 2 - the Edsel of Mac. There may be the failure of logic-board that was covered by a recall program that is now complete.

The model was abandoned in February 2011. From five years from this date, it will be classified by Apple as "vintage product." This means that Apple will refuse probably a maintenance action (see exceptions on the linked page.) In this case, you will need to go to an independent service provider. The part can be is no longer available, or the repair may not be profitable.

An appointment of 'Genius' in an Apple Store, or go to a different service provider authorized, to have the tested machine. Diagnoses of current equipment used by service providers don't detect the fault. There is a specific test for the same problem that Apple calls "VST" (for "video system Test.") Ask for it. A "Failed" result means that the defect is present.

You may be quoted a price of about $350 (in the United States) for a "repair," which is to send the unit to a repair shop central and lasts about two weeks. For this package, found nothing wrong with it should be fixed, not only the logic board.

Sometimes, the spare part is also faulty, so be prepared for this eventuality. If you decide to pay for a new logic board, rigorously test during the 90 day warranty on the repair. Some owners have reported that they went up to three replacement boards before you get one that worked.

If you don't want to pay for the repair, you may (or may not) be able to work around the problem by disabling automatic switching graphics. To use the separate graphics processor, you will need a third-party utility to manually switch to him.

Often, the problems start after an upgrade of the OS. If the upgrade has been recently, and you have backups, you can then go back to a previous version of OS X.

XP Home Edition crashed after installation of updates, will not start in any mode, help!

Compaq Presario V2000

After you install the updates, H.E. XP crashed.

Try to start in safe mode accused the MUPS. SYS line

press F8 to disable automatic reboot

Restart in any mode result in the horror of horrors the Blue Screen of Death with the following error codes:

STOP: 0x0000007E (0x805BA6EC, 0xF79372B8, 0 x 80000003, 0xF7936FB4) and any other information about the error

RAN on PhoenixBIOS diagnostic test; all tests passed

Can not get into windows to run restore. Any advice? Have a Compaq I don't have the OS or restore disk (did not come with it). I do try to find a copy of XP itself?

Thanks for any thoughts!

Go to the http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/8a2928b5-9fdf-4c40-8afc-edde6b808b79/ wire

HP M175NW can't find the scanner after installation of new

Hi all

IM new to the forum. Hope someone can help me with a problem I am facing. I use an iMac 27 "2012 model. Recently, I did a clean install of Mavericks and since updated 10.9.2 up-to-date. I lived an isssue where I would like to print a document, and then the printer would be considered as offline... I could still access the right web page. The only way to get around it was to restart the printer...

After a little research I have reset the system preferences print system and tried to reinstall the latest version of the software on the HP website. I got to the screen where I had to install a print queue... There was an alert on this page that said something about being taken in charge, but only for the hologram IP but I didn't really that much of a choice, because the printer is on an IP network...

.. in any case, I set up printing queue under the Protocol LPD to Jetadmin taken but the scanner is no longer there. This isn't to the utility capture image. The utility scan HP is installed but not visible there either.

If anyone has encountered this before?

Peter

Hello

Thank you for taking the time to answer. These are the same instructions that I took 3 or 4 times without success. I even tried to install the HP 10.8 software but had the same problem...

I however found a solution to my problem after a few hours of troubleshooting... The solution was much simpler. Is it turns out that Apple has updated the HP drivers that appear as an update of the system after you install the software. Once you install the update, you delete the printer and add it again. When you do you now have the option to install it as a Hello printer versus an IP printer... Once you do this, you will have scanning capabilities.

Hope that helps others out there

Lightroom CC instantly always crashes after installing the new update on iMac

I can't start over Lightroom, and the summary of the following errors appears:
Process: Adobe Lightroom [5073]
Path: / Applications/Adobe Lightroom/Adobe Lightroom Lightroom.app/Contents/MacOS/Adobe
ID: com.adobe.Lightroom6
Version: Adobe Lightroom [1083169] (6.6.1)
Code type: X 86-64 (Native)
Parent process:? [1]
Responsible for: Adobe Lightroom [5073]
User ID: 501
Date/time: 2016-08-11 21:07:04.000 + 0200
OS version: Mac OS X 10.11.1 (B 15, 42)
Report Version: 11
Anonymous UUID: F91AA4B1-D299-6529-670E-6BA0CC1D67A3
Sleep/wake UUID: 616F6B20-824F-4E73-9DE0-A2284363FEA6
Time since started awake: 13000 seconds
Wake time: 1500 seconds
Integrity of system protection: enabled
Crashed thread: 0 dispatch queue: com.apple.main - wire
Exception type: EXC_CRASH (SIGABRT)
Exception codes: 0 x 0000000000000000, 0 x 0000000000000000
Note the exception: EXC_CORPSE_NOTIFY
Request for clarification:
"Reason for terminating app due to an untrapped exception 'LuaRunException',: ' AgPathUtils.getStandardFilePath: could not create the directory where the file exists: / Users/konradmeyenberg/Library/Application Support/Adobe/Lightroom"
ending with an exception uncaught of print type
Abort() called
What can I do? Uninstalling LR LR CC reinstalling and restarting of the iMac (recent Version) did not help.

Hi DdeGannes

After installing 10.11.6 and reinstall LR and reboot: does not help same problem still present. Of course another reason.

Must have something to do with the directory. If anyone can help? On my labtop, it works without any problem.

Rocket crashes after installation of new FW

Similar Questions

Maybe you are looking for