Role of the Editor cannot crush PDF when publishing the computer

Similar Questions

• Cannot burn DVDs or publish on computer for 'home movie' Director / window Vista

  Hello

  I try to publish to the computer for home movie maker Vista zipper theater. publish 52% then pop error I also try many time to burn movie to DVD only 39% is stop and pop up error. Please help thank you very much

  Hello

  ·         What is the full error message?

  I suggest you follow the steps mentioned in the article below.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Also refer to:

  Solve problems with publishing a movie to a recordable CD

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-a-recordable-CD

  Also try to change the audio filters off and check see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/vid, eo-filters-in-Windows-Movie-Maker-frequently-asked-questions

  Thanks and regards.

• Movie Maker plays my movie, but he leaves when published on computer and burned to DVD clips

  I just made my first movie using Windows Movie Maker. He plays a lot (and displaying all clips) in Movie Maker, but when I published the movie to my computer it left out a lot of the clips. He'll just black on the screen, then finally plays again. (Obviously), he plays the same way on the DVD I burned using Windows DVD maker. What can happen? What should I change? As I said, in Movie Maker, he plays throughout and leaves no transitions, titles or clips. Thanks for any help!

  I just made my first movie using Windows Movie Maker. He plays a lot (and displaying all clips) in Movie Maker, but when I published the movie to my computer it left out a lot of the clips. He'll just black on the screen, then finally plays again. (Obviously), he plays the same way on the DVD I burned using Windows DVD maker. What can happen? What should I change? As I said, in Movie Maker, he plays throughout and leaves no transitions, titles or clips. Thanks for any help!

  ============================================
  A few ideas.

  It may be worth trying to go to... Tools / Options / Compatibility tab and
  Uncheck all filters / OK.

  Maybe some of your video clips are not fully compatible with the film
  Maker. Even if they can play when on the timeline... compatibility
  question arises when the project is published in a final movie WMV file.

  FWIW... Several formats are apparently compatible with Movie Maker but
  the most reliable choices are:

  Photos - bmp

  Video - wmv or dv - avi

  Audio - wav, wma, wmv

  And sometimes make a project as large and complex can cause problems.

  Automatic video option might be worth a try:

  Windows Vista-
  Make a movie quickly in Windows Movie Maker (AutoMovie)
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-quickly-in-Windows-Movie-Maker-AutoMovie

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• When I try to down load a pdf file, it is written in the computer talk. I think it's because the html editor is incorrect

  original title: pdf problem

  When I try to down load a pdf file, it is written in the computer talk. I think that this is because the html editor is incorrect, it is fixed to Notepad. can someone tell how to fix this?

  Notepad can not read the PDF. SumatraPDF download then install it . Download the exe file. Then run

• Cannot print pdf.  indicates the pages are not selected when everything is selected or 1-12 is selected.  Why not print it and what has changed since he has always worked in the past?

  Cannot print pdf.  Message says pages are not selected when "all" is selected or when the "pages 1-12" is selected.  Why will it not print what is always in the past?

  Hi donw50735963,

  Please try the steps in the following article: Acrobat and Reader help / troubleshooting PDF printing | Adobe Acrobat, Adobe Reader

  Thank you

  Abhishek

• I created a pdf file on my computer that has several links to to other PDFs, word documents, etc. When I send this to people that they cannot access the links. Probably because the files in the links are only stored on my computer. Any ideas?

  I created a pdf file on my computer that has several links to to other PDFs, word documents, etc. When I send this to people that they cannot access the links. Probably because the files in the links are only stored on my computer. Any ideas?

  Of course, it's an option as well. You can attach files to the main PDF file, or you can merge all files into a single PDF portfolio.

• HP Officejet 7610: Scan of the computer cannot be activated or scan and combine them into a single pdf document.

  I've recently updated to macOS Sierra 10.12 and scanning to HP computer software cannot be located when I open the HP utility.

  I can't find a further recommended HP software for my device other than El captain in operating system online.

  If I try to scan through preferences systems for printers and Scanners I can open the scanner, but I can't create a PDF combining into one document - it cancels the procedure after about 2 pages!

  The scan HP Destinations 'PDF for Adobe Reader' is red 'could not locate the target application that might have removed or uninstalled. File format = "PDF".

  How can I get that back?

  Thank you

  Hi @JOGL,

  Thank you for joining the HP Forums!

  I understand that computer analysis can not be activated as well as the scan and combine them into a single pdf document. With your printer HP Officejet 7610. I am pleased to see that for you!

  At this time for this model. There is no software and drivers for Mac OS X 10.12 again, given that the operating system has just been launched, it could take some time. For the time being, you can try to use HP Easy Scan to see if that can meet your scanning preferences. In otherwise, all we can do is wait for the software and drivers to be released.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Thanks for posting and have a nice day!

• When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.

  If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.

• Assignment of roles to the user when creating the user

  Hi all
  
  I gave a roll deposited (< dsp:input bean = "ProfileFormHandler.value.roles.role" maxsize = "30" size = "30" type = "text" / > on the registration page.) After registration, each field in db except role (table dps_role).
  Pls let me know what I am doing wrong.
  
  Thank you

  You should not assign roles to the user as 'ProfileFormHandler.value.roles.role' of 's profile. You can link formhandler property to which you can pass the name or id of the role that you want to assign role assignment must always route through safety ATG API in order to properly update the mappings of Homeland Security. Because of these dependencies, you should not try the role of simply call profile.setPropertyValue ('roles',...) The code cannot fail this way, but if you assign the role in this way then it may not work as expected when checking for role based privileges. Here's one possible way to do it:

  1. in your file properties formhandler declare a dependency on the directory of the default user, which by default points to the profile database:

  userDirectory = / atg/userprofiling/ProfileUserDirectory

  So, in the form Manager, you declare corresponding setUserDirectory() and getUserDirectory().

  2 then in the formhandler, get the DirectoryPrincipal objects associated with the user profile and the role you want to assign and then assign the role to the user:

  import atg.userdirectory.UserDirectory;
  import atg.userdirectory.DirectoryPrincipal;
  import atg.userdirectory.User;
  import atg.userdirectory.Role;
  import atg.userdirectory.DirectoryModificationException;
  
  import java.util.Collection;
  import java.util.Iterator;
  
  ..
  ..
  
  private boolean assignRoleToUser(String roleName, String userId) {
  
    UserDirectory userDirectory = getUserDirectory();
    DirectoryPrincipal userPrincipal = userDirectory.findUserByPrimaryKey(userId);
    DirectoryPrincipal rolePrincipal = userDirectory.getRoleByPath(roleName);
  
    User user = (User)userPrincipal;
  
    Collection collection = userDirectory.getRoles();
  
    boolean status = false;
  
    Iterator iter = collection.iterator();
    while(iter.hasNext())
    {
      Object obj = iter.next();
      if(obj instanceof Role) {
        Role role = (Role)obj;
        if(roleName.equals( role.getName() ) && user!=null) {
          try {
            status = user.assignRole(role);    //will return true if the role was added otherwise false
          }
          catch (DirectoryModificationException e) {
         //handle exception
          }
          break;
        }
      }
    }
    return status;
  }
  

  In the code above 'roleName' parameter is the name of the role to be assigned to the profile with the id as "userId". If you want to do the role assignment when creating the user, then you can do the things above in postCreateUser() so that you can get the Principal associated with the profile. For more information about the interfaces and classes used here, you can refer to the documentation of the API of the ATG.

  http://docs.Oracle.com/CD/E26180_01/platform.94/APIDoc/ATG/userDirectory/package-summary.html

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  MacBook Air, OS X El Capitan

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• What causes the "specified operation cannot be performed when no device in the task.

          using (task NationalInstruments.DAQmx.Task = new NationalInstruments.DAQmx.Task ())
  
          {
  
            task. Timing.ConfigureSampleClock ("", 1000, SampleClockActiveEdge.Rising, SampleQuantityMode.FiniteSamples, 2);
  
            task. DIChannels.CreateChannel ("PXI1Slot6/Port2/Line3", "", ChannelLineGrouping.OneChannelForAllLines);
  
            task. Triggers.StartTrigger.ConfigureDigitalEdgeTrigger (triggerLine, DigitalEdgeStartTriggerEdge.Rising);
  
  DigitalSingleChannelReader reader = new DigitalSingleChannelReader (task. Stream);
  
            drive. ReadSingleSampleSingleLine();
  
          }

  Why the code above throws an exception DAQmx with message:

  "Specified the operation can only be performed when there are no devices in the task."

  task name: _unnamedTask<2>

  "Status code:-200477"

  There is a device in the task.  I'm trying to PXI1Slot6 (map of IO 6535) to enter the 2 samples off Port 2 line 3.

  Hi CurtisHx

  Thanks for reporting this. I agree that the error message returned by the driver is very unclear and fails to a user of the API provide enough information to determine the cause of the error in the code. In addition, it seems that we don't document the correct order of operations to set up a task well (the best thing we could find was the subject of tasks in NOR-DAQmx , who actually seems to imply that the channel configuration and their calendar can be made in any order). We are producing several bug reports, to fix / improve the following:

  • The error message returned by the driver to the API.
  
  
  • The help topic for the tasks in NOR-DAQmx.
  
  
  • The documentation of the specific method provided with the NOR-DAQmx .NET API.

  To clarify the error, it seems that 'peripheral' in ' specified operation cannot be performed when no device in the task "is in fact reference to the channels configured in the task. At this point, I'm not sure what "device" can be applied to other entities in the DAQmx driver software, but I'll post at the time where I have an error message created by the development team working on it.

  Best regards,

• I changed my password but cannot connect. When I reset the password they send an e-mail to my other email account, but there is no text tell me how to change

  I changed my password but cannot connect. When I reset the password they send an e-mail to my other email account, but there is no text tell me how to change it. He repeats to me just 'loading '.

  frustrating

  If you are referring to a Windows Live account, you can get help here: http://www.windowslivehelp.com

• users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  I am the Director of technical support for more than 1000 computers. Recently in some computers (windows based) users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  Hi MASPAdministrator,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Cannot delete files and music always there but not display upward when I connect to the computer?

  Hi all

  Recently, I had a lot of problems with the music does not or don't play not I decided to delete all my e260 music and start again.  That's where the real problem started.

  For some reason I can't delete three of the albums on my player.  Each of the albums have what appear to be corrupted in them files. My computer does not recognize the file type and file extension is given so I don't know what they are.  Each file "appears" to 4 GB in size but that may not be appropriate for my e260 is obviously only 4 GB in size!

  Whenever I try to delete them I get an error message reading "cannot delete file: cannot read the source file or disc»

  I tried to update the firmware, reset e260 to factory default settings and made 'restore' thingy (where you hold registration and plug it into the computer, etc.) and these files are still there.

  After reading this thing of disk checking on this forum, I did this.  I was then able to remove two of the albums, but when I tried to delete the third album renamed 'a' and the damaged file shows 0 bytes in size, but I still can not remove.  However, I can move it to the folder music to any other folder.  I just can not remove!  When I do, I get an error message saying "cannot delete f: cannot find the file specified. '.  Be sure to only specify the path and the correct name.

  After all that I started my e260, and now I find that 2 other albums are always on it, even if they do not display any where when I connect it to the computer.  I can see and read these albums on the drive, and they seem well, they do not appear to be there when I plug it into the computer and look for them in windows Explorer.  The music folder is not hidden also.  These two albums are not part 3 albums that I could not remove, they are actually part of the new substance started sort of all these problems with the music does not and is not only now that they are the display upwards and play but are not appear when connected to the computer!

  I know it's probably not a lot of information but can someone tell me how to fix this?  If not, can I just format the * bleep * thing or I'll then have an e260 dead?

  See you soon,.

  PKFFW

  PS: Sorry for the long windedness of this post.

  Format will not remove the firmware, which is the operating system of the Sansa. It removes only the content that you have added. It will go back to what it was when it was new out of the box.

  MTP does not matter if you have never used it. The ghost album can be just a list remains in your database file. Nevertheless, we must get rid of this corrupt file, so Format is probably your best option.

  For what it's worth, to connect with the PSG, your computer needs Windows Media Player 10 or 11 is installed. XP comes with WMP 9, so he will not see the Sansa in MTP mode. unless you have updated.