Windows XP cannot reformat my external drive to seagate expansion of exFAT

Similar Questions

• Windows 7 cannot see my external hard drive, even if I don't use it on this computer!

  I have 2 external hard drives, both worked well on Windows 7. Now, on the same computer, no change, they stopped from within the computer. Drivers fine and visible in the devices. all ideas

  Hello Gus,

  Windows 7, having trouble finding external drives is not uncommon. I use Aomei Partition Wizard to get Windows to recognize the drive; Download here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 .

  Once installed simply click on the external drive, and then select Properties. Who should get the drive recognized by Windows. See if that solves the problem for you.

  Kind regards

  BearPup

• How to uninstall windows vista or reformat the c drive

  How to uninstall windows vista or reformat the c drive?

  Hello

  You do not uninstall Vista as such.

  Vista cannot uninstall itself by Vista, formatting the drive that is installed on. In other words it cannot remove itself.

  You install another operating system, removal of Vista during the installation process of the other operating system...

  You don't say exactly what you are trying to do.

  You can format a disk if it a second drive with the Dual Boot operating systems and leaves without data or the operating system on it at all.

  We need more information.

  See you soon.

• Can I install Boot Camp/Windows 7 completely on an external drive?

  My MBP has an inside 128 GB SSD, and insists on the creation of a 50 GB partition on it in order to install Boot Camp Boot Camp.  This would force me to erase most of what I have installed.

  Is it possible to force the Boot Camp Assistant to install on an external USB3 Western Digital 1 TB Passport drive I have?

  Thank you!

  N ° Microsoft does not allow for Windows must be installed on external drives, which is the reason why Boot Camp requires you to create a partition for Windows on the SSD.

• ACER Travelmate 5760 with Windows 10, cannot detect the external projector

  I have an ACER Travelmate 5760. I have upgraded to Windows 10, because Microsoft is launching a few checks and said that I would be able to upgrade. But now, the laptop cannot detect an external projector or monitor. Is there a driver that I need to improve?

  Thank you

  Winifred

  When you connect your projector, if you press the windows logo key + p, are you able to select expand and check if the projector work?

  also, if you right-click on your desktop and choose the settings display, is the acknowledged projector?

  How to connect the projector?

  on the drivers, you try to uninstall the real Intel VGA driver and reboot with your laptop connect on the web and let windows update find new drivers as appropriate.

• Windows Vista will not read external drives

  I had an external hard drive connected to my computer earlier today. All of a sudden, my computer froze and started to make noises beeps, then I stopped and released my external drive.  Now, whenever I plug a drive it tells me that I have to reformat. However when I try to reformat the drive, he told me that the format could not be completed. It allows me to format NTFS, but that does nothing for me. I need to format in FAT or FAT32, but it won't let me. I even reformatted my drive to FAT32 from another computer, but when I plug in Vista it still says it needs to be formatted.  I got lost. How can I get Vista to re-read my external drives?

  Hello

  Run the diagnostic tool for Microsoft Fixit.

  Hardware devices not detected or does not:
  http://support.Microsoft.com/GP/hardware_device_problems

  See also: http://windows.microsoft.com/en-US/windows-vista/Formatting-disks-and-drives

• Windows Vista backup on the external drive stopped working

  I have a LaCie 750 GB hard drive external (total size 698 GB) who I've been saving my drive C and D to a Dell XPS 410 using Vista Home Premium software.  He contended until the end with a backup automated on-demand for once a week.  He performed the backup 30 times since 11/09/09, but sometimes did so sometimes (shorter range) other than the weekly on-demand.  When I compare the total size with the free space on the external drive and my drives C and D, the amount of used space is respectively 131 GB, 5,11 GB and GB 665,5.  I am not very computer savvy, but if the backup program backs up only what of new each time, why used on my external drive space is so superior to what is still on my C and D drive?  I assumed that the backup software would just copy the previous backup, each time that a new backup or write on the oldest backup, but apparently is not.  So now all I get are messages saying that the backup was not successful because a file was in use or something to that effect.  I'm doing something wrong or do I have to reformat the hard drive external when it is "full" to start the backup of my computer again?

  Hello
   
  Your assumption is correct. Cross check if a new backup is created and saved in the external hard drive. If a new backup is not too write the old backup, the use of the space will be very high.
   
  Two particularly useful automatic backup features are the ability to do a scheduled backup and the ability to save your files.
  We recommend that you cross check if backup settings are intact. To do this, try the following steps.
  1. open backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.
  2. click on change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  For more information on "back up and restore: frequently asked questions" visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
   
  You get the error message, unplug the external drive and restart the computer. Connect the hard drive and check if you get the error message.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Cannot play mp4 external drive, but still flow to 35.0 stuff

  35.0 running on windows 7 pro.

  I want to be able to play mp4 external drive and continue to spread. I could do this before updating 35.0 when I put media.windows - media - foundation.enabled to false. Now, it seems that I need to adjust the two who and media.play - stand alone to false, and then mp4 will open in media player classic (as I would like to). But the tumblr.com streaming will not work. He's right there.

  Here's the test:
  1. http://download.wavetlan.com/SVV/Media/HTTP/H264/Talkinghead_Media/H264_test1_Talkinghead_mp4_480x360.mp4
  Need to download and then play in an external player

  2. http://crossfirezine.tumblr.com/post/108731776691/henry-fox-has-a-dope-new-edit-up-for
  must broadcast, not just stand there. (it broadcasts if the two configs above are true)

  Configuring the application for mp4 to Media Player Classic seems to have no effect on the first event unless I do the topic: config changes, what jumps do test 2.

  This has worked before the update 35.0, whereby time firefox crashed and I lost ALL my settings configuration. Not sure why this has happened. Now, I can't get it working again.

  Thank you

  EC

  Please let "media.windows - media - foundation.enabled" on true and ' media.play - stand alone "on fake...

• Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt

  I had a Satellite Pro A60 for about 3 years without problems.

  Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer.

  No matter what wil suggestions appreciated!

  Thank you

  Found this Microsoft Knowledge base article:
  You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup

  http://support.Microsoft.com/kb/315311/en-us/

  Can it help

• Windows Vista Business 32-bit external drive does not work in the administrator account

  Hello, I installed Microsoft Windows Vista Business 32-bit on a Dell Precision T3400 workstation, and I have also configured the strategies of groups for Non administrators. Basically, I disabled the removable drives, 'C' and had "only for non administrators." After edit in GP, the system has been precisely set and I am able to access the Administrators account and copy stuffs from my local drive on my USB key. But a few days later, I'm not able to use my USB or other external drives in Administrator account, it shows that 'inaccessible '. But I can't access local drives 'C' or '. Then I have to redo the group policies and it will last only for 3 days. Thanks :)

  Hello

  You are on a domain network?

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Cannot access an external drive on the network

  I have a network problem. I have a Dell 640 m laptop, Vista Ultimate SP2 32 bit, Windows Defender, Malwarebytes, Vista Firewall, Kaspersky AV 2009.

  I have my laptop and my office in the same working group. I can not access my 200G Iomega external for my laptop. It is connected to my desktop dell running XP SP3, Avast Pro, Malwarebytes, Windows Defender and Windows Firewall. I have two internal drives on my desktop mapped and accessible from my laptop. I also have the printer connected to the netwoked desktop from my laptop and it works fine. I have sharing enabled for the external drive.

  When I click on the external drive in the folder 'Network' of my laptop or when I try to map it I get the following message

  \\DELL-DESKTOP\Iomega on Dell desktop computer is not accessible. You could
  are not allowed to use this network resource. Contact the
  Administrator of this server to find out if you have access permission.

  Not enough server storage is available to process this command.

  It sounds like a setting on the XP machine for "simple file sharing". I think that you have to turn this configuration / OFF explicit sharing on each item you want shared. On a Pro machine, it's an easy setting

  Q303248 - computer management commands are not available with active Simple file sharing:

  A XP Home machine requires the CACLS utility usage:

  162786 - capacity of undocumented CACLS group permissions:

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• "Computer does not allocate a drive designation letter and is not displayed when windows Explorer opens to USB external drive.

  Original title: problem connecting to USB external drive

  I tried to install a 30 GB drive to Fireball over using a disk enclosure external hard Octigen SATA-USB 2.0 on an Acer Aspire T671 under Vista Premium computer. The system recorded new material, installs drivers and registers an entry on the massive safe removal as a "USB storage device" icon However, the computer does not allocate a drive designation letter and does not show the opening of windows Explorer.

  The hard disk is configured as a master, as described in the user manual.

  How can I make the computer recognize the drive and assign a drive letter?

  Thank you for the help

  Frank Hughes

  Hi FAH300,

  If you are not able to format the drive, there may be a hardware problem.

  I suggest formatting the disk using the instructions linked by wb2001.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open my external drive; message on FAT32

  The info is on the disk, but it won't open... on the Panel, he appoints the drive and says it's the shortcut, then this message: there was a problem starting $WZ. FAT32 that the module specified is not found what can I do to solve the problem and get my information?

  Black salvation of ink,

  1. What is the file format of the external hard drive?

  2 have you made changes on the computer before this problem?

  I suggest you to try access the same external drive on another computer and check if you are able to access the same.

  This will help us know if the problem is with an external drive or with the computer.

  If you touch a shortcut icon on the external hard drive then I suggest you perform a virus scan.

  This problem can occur even due to the virus from the system.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Let us know the status of the issue.

• Portege M400 - Windows XP cannot find the hard drive

  Hello

  Ive got a Portege M400 who im looking to get a new one, I never had the Tablet XP CD so im trying to install using an XP Pro disk, but whenever I get no hard drive can be detected and I tried another disc of publishing house also.

  Ive looked for SCSI / SATA drivers but can only find RAID drivers which are not good for me.

  I hope someone can help me

  Thank you

  Hi wacksonjackson,

  Why these RAID drivers are not good for you? Windows XP requires RAID drivers if your laptop is RAID controller and there is no other choice to install XP from a normal Windows XP disc. Then download the RAID drivers on the official website of Toshiba. Either you create a new installation with the RAID drivers disc using nLite freeware tool or you copy the drivers on an external USB FDD and load them during the installation of XP.

  Also check similar topics here in the forum. You will find hundreds of similar topics on SATA and RAID drivers.

  Check this box!

• Updates of 04/14/10 Windows messed adaptation files to external drives

  After getting several updates on 14/04/10 to my Vista Business Edition at work, I can't copy external files to one of my hard drives. Simply, he's sitting there at 0% and does not copy. I tried to restart and insertion of 2 different USB usb keys and it will not copy anything. It is right here on the remaining term, saying that he is calculating... and on speed 0 bytes/sec copied. I'm waiting more than 1/2 and time two times and nothing happens them. Finally, I have compressed all files, I wanted to copy using Winrar and extract to USB and it worked, but I can not copy directly on my hard drive to my thumb drives. I don't have the idea than updates caused this.

  Try to start in safe mode and check the status. You can copy without any problems?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Off-topic, try the free TeraCopy software and check the result.

  See you soon! "That's all a pension chequer nights and days,"
  Where destiny with men for pieces plays;
  Here and there, mates and kills.

  In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!