Rolling noise problem - repeated during navagation

Similar Questions

• His fight problem repeats all the time

  the 2 (noise control) repeats all the time? answer me on * address email is removed from the privacy *.

  Uploaded by Isohunt AOM

  Hello

  1. the problem occurs all playing the Flight Simulator game?

  2. have there been recent changes to the computer before the show?

  If you have problems playing the Flight Simulator game, I suggest you send your request here: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope this information is useful.

• Satellite A500: update BIOS V1.50 is fan noise problem reappears

  I have a Toshiba Satellite A500 with fan noise problem.
  It has been partially resolved the upgrade of BIOS from v1.20 to v1.30, according to this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=46719&start=0&TSTART=0
  

  Yesterday I updated the BIOS v1.50, and the sound of the fan returned.
  I do not recommend this upgrade if you have had the problem of fan noise.
  

  I have downgrade BIOS v1.30 and fan noise problem is solved again.
  I know that people have problems to get the downgrade to BIOS, so I describe the process in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577&TSTART=0

  Thanks mate for sharing this with us

  But perhaps you could use the v1.5 BIOS and could reduce or reduce the activity of module cooling in Vista/Win7 power management settings.
  It would be interesting to check it out

  In any case thank you for this info

• With differential measurement noise problems

  Hey everybody.

  I use an NI USB-6211, LABView 2011 and Win7.

  I'm trying to measure a voltage through a resistor using differential mode. But unfortunately im getting a lot of noise (on + - 25%).

  The voltage source I use is variable and can go up to 600V. With my diet I am essentially heat a metal plate.

  A parallel voltage divider is used to reduce the voltage by one hundredth (1 MOhm and 10 kOhm).

  Two wires attached to the lower resistance then go directly into analog input 0 + 8 of data acquisition.

  So if I'm trained 600V to the plate, data acquisition should get about 6V... and that's what I measure with my voltmeter attached to the acquisition of data input pins.

  I also tried these resistances of POLARIZATION and connected the + and - leads to the analogous to the ground like a resistance I used 10 k, 100 k and 1 MOhm and 2 MOhm and

  continue to receive a bad signal.

  Two sketches of the wire as a signal (100V, supposed to measure 1V, no CORRECTION) are attached to the post.

  Concerning

  EDIT: I forgot to write that I even tried an another NI DAQ and still get this noise problem.

  Also, I measured the voltage source signal using an oscilloscope and I see that noise. But the differential mode isn't supposed to

  reduce noise to a minimum?

  Hey everybody,

  come to understand that the voltage divider resistors are medium to high and they were the main reason for the noise

  problem.

  Before I used 1 MOhm and 10 kOhm, now I use 100 ohm and 100 kOhm and with a median filter in this regard, it works very well!

  But still, if I use the resistance of these BIASES they do not change.

  Concerning

• scope of nor-5114 interfaced to 2576 OR multiplexter relay and a signal to test via Coax, noise problems

  Hello

  We use a system of connected steps and have questions about the best method to interface to our test design.

  DUT (Test Point [n])---> 6 ft coaxial cable---> 96pin--> NI 2576---> NI 5114 (map interface) connector

  Note1: the map interface 96pin and equipment, OR share the same floor plan.

  Note 2: We have tried with changing the setting scope NI5144 of 50 ohm and 1 M ohm but do not seem to see a difference on our potential noise problem.

  The questions are:

  (1) what is the best place to justify our coax cable shield, the side was FORCED (to the mass of Council) or on the side of 96 pins?

  (2) we currently have the shield connected on the side 96pin and it brings in some possible noise to our test had TO that point signals, we added a 100 ohm series resistor close Testpoint and it helps solve the problem, but it is not acceptable to have this resistance in the beam of cable by our client, and we try to find another option to solve this problem of potential noise.

  Any help and advice on this is appreciated.

  Kind regards

  Miguel

  Miguel,

  1.) as long as you do not adopt loops of Earth in your system, you should be fine to be implemented for the ground of coaxial cable. I didn't want to forget that it is important that your HAD is not referenced to the mass of power also because this may introduce ground loops in your system.

  2.) as for the culprit of the noise that it is the combination of the two specs you listed. Amplifiers in your DUT output are specified for less than 1/10 the capacitance of the coaxial cable. This is the origin of the noise that you see, because the op amp is unable to drive the capacitive load and causes instability of the amplifier.

  There are a few methods you can use to remedy this situation and here is a resource that describes some of these solutions.

• McAfee will end not full scan-an unexpected problem occurred during scanning

  The analysis goes to 95% and then displays an error report: an unexpected problem occurred during your analysis.  Please click OK to return to the home page and then try to run the scan again.

  Hello

  As the issue is specifically related to McAfee I suggest you to post the question on the link provided below for assistance.

  https://community.McAfee.com/index.jspa

• How to fix a noise problem any on a macbook under xp

  How to fix a noise problem any on a macbook under xp and the driver has been removed for the macbook, I tried the auto fixes

  Hello

  If you have installed Windows XP using Boot Camp in the book of Mac, you will need to contact the Apple Support.

  http://www.Apple.com/support/MacBook/

  It will be useful.

• hplaserjetpro mfpm176: a problem occurred during the preparation install the software in your system. Please restart.

  Cannot install HP COLOR JET PRO MFP M176 DRIVERS in WINDOWS 32-BIT

  and when to install the drivers I get the message below

  a problem occurred during the preparation install the software in your system. Please restart.

  same problem

• VMware converter 5.5 Update 1 and target host is 5.0.0 - is a known problem observed during execution of this?

  I intend to use vmware converter 5.5 update 1 and target host is 5.0.0.

  someone can confirm if there is any known problem observed during execution, it is?

  Welcome to the community,

  According to the Matrices of the interoperability of products VMware Converter 5.5 supports ESXi 4.0 and versions later, you shouldn't have issues related to the ESXi version you are using.

  André

• 'A problem occurred during extraction of the files' during installation - Adobe CS6

  I downloaded both the DesignWebPremium_CS6_LS16 on my computer Windows 7 Pro and when I run the exe, it gives me the error "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. When I click OK another message comes up with ' a problem occurred during extraction of archive. ". Please try to download the Adobe CS6 Design and Web Premium again'. Any ideas?

  • The computer has 128 GB of space
  • I downloaded the software twice
  • I tried to extract to the desktop "C:\Users\Brad\Desktop\Adobe CS6 Design and Web Premium" with my login right click on it and run the exe as admin
  • I tried to extract to the desktop "C:\Adobe CS6 Design and Web Premium" with my login right click on it and run the exe as admin

  Hello

  Please see the following links:

  Troubleshoot installation with the log files. CS5, CS5.5, CS6

  Installation and launch log errors | CS5, CS5.5, CS6

  The know us if that helps.

  Kind regards

  Bani

• A problem occurred during extraction of the archieve

  When I tried to install 5.2 Lightroom, I received the message next-a problem occurred during extraction of the Coop.  Please download and try again.  I did it several times and it still gives me the same message.  What should I do?

  Thanks for your reply.  After sending the email, I went to the help

  discussions that I probably should have done in the first place.  A Council

  told to try another internet browser to download Lightroom.  I changed

  chromium for Firefox and bingo, it worked!

  All the best,

  Bob Gandel

• Cannot create a new illustration. Problems occurred during the recording of the print file.

  I can't open a new Illustrator file. He sends me this error: failed to create a new illustration. Problems occurred during the recording of the print file. ID:-1

  I opened a previous document created in CC, but it does not allow me to copy and paste items from one doc to another.

  I rebooted with nothing doesn't.

  System:

  Adobe Creative Cloud CC

  Mac Book Pro 2012

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  On a mac, but it seems that it has resolved itself. In my view, that it may have been a corrupted file that threw everything off. Thank you.

• Dell studio 1558 fan noise problem

  Hello dell.

  I wonder how many people got prob with studio dell 1558, just google and found most of them (all) having prolem with the dell studio 1558 fan noise.

  What happens in my case:

  The fan noise was ok before a few weeks ago, and he started 2-3 weeks back. aaftre fans of 20-30 sec noise suddenly and during idle sound Inc. is not normal/quiet a bit different than usual.

  The fan noise is really annoying and it constantly happens not even a minute, it stops.

  So in my case I think that it may be hardware fan prob because I wasn't this prob when I bought this system may be fan is going to jam in a near future?

  It's my system config:

  Studio 1558:

  : Processor Core i3 M350 2.27 Ghz processor

  RAM: 4 GB

  Gfx card: ATI Mobility Radeon HD 5470

  HARD DRIVE: 500 GB

  Backlit keyboard

  Slot load CD/DVD player

  P.S.: My CD/DVD drive and HARD drive recently prob SO dell replaced both.

  Thank you

  Manan

  Today engineer came to my house and the replacced he fan + heatsink. Thermal paste is already on it I guess, it has not applied separately.

  Fan runs smoothly.

  Failure: in fact the outer part of the radiator is responsible for this when the engineer came out the part and he hit an outside party who is also visible (Manager) of air is broken.

  It was broken when an engineer trying to clean the fan lol.

  I've also attached the image of the broken part. Image is not good but always visible

  .

  Another view:

  

• Satellite L850 - weird noise problem (not events)

  Hello

  I have a weird problem with my laptop. Since a few days, my laptop started to make a little noise from the base of the laptop.
  I care because during the day I don't even notice, but now (it's 05:00)
  Clearly, I hear a noise coming from the base.

  It has not happened before and I don't know what could be, because the strangest thing is that, according to Toshiba Health Monitor, fan is 0% (because I'm on mode eco and do nothing to do) and the CPU is at 48th. As you can imagine, my laptop is far from heating.

  Then, where this noise could come from?
  Now, I know that this isn't the ventilation openings, but something inside the laptop (maybe HARD drive?)

  And I'm confident in the vents because the vents start to operate when I load a movie or game, and when start knocking noise that I do not speak of persists.

  It's not embarrassing, because I have to be in complete silence to hear it. As I said, I don't notice the noise when it is diurnal, and I could live with it, but not knowing this noise source makes me a bit paranoid. I bought a month ago, so I don't think that I have to clean.

  Thank you.

  On this virtual path, it is not easy to tell where the noise is coming so if you want to solve this problem I think you should bring to the nearest post of Toshiba and the guy there it should check. Guarantee is valid if repairs must be free.

  Can you tell us what part of your laptop is this noise?

• keyboard is as I am now a key and will not stop repeat during the game

  During the game on the internet keys I have insisted is "locked" and will continue to do the same operation repeatedly. How can I fix the problem?

  During the game on the internet keys I have insisted is "locked" and will continue to do the same operation repeatedly. How can I fix the problem?

  The keys on which?   For example, a common symptom is having some modifier keys seems to "stick" after they have been used in a repeat operation.   The solution is then to press and release the opposite modifier.   For example if a Ctrl key seems to be stuck and you know that you use RightCtrl - in a repeat operation, press and release - LeftCtrl.   Etc.

  FYI

  Robert Aldwinckle
  ---