Root AND non-root ssh access

Similar Questions

• enable access for a user not 'root' ssh

  I want to create user for minimal Troubleshooting on esx server 5.x and this account has the permission to reboot or shutdown server and esx with ssh access.

  
  

  but only ROOT ssh access account

  
  

  I create the administrative account but not access on ssh... only root account

  
  

  Help me

  
  

  Thank you

  
  

  Hello

  Open a client vsphere directly on your ESXi and create a local user.

  

  Then add the user to the Administrators group.

  

  You will then be able to use ssh with this user.

  

  Kind regards

  Julien.

• Adobe cloud locked out and unable to access updates. Released and NONE of my passwords (written down) work?

  Adobe cloud locked out and unable to access updates. Released and NONE of my passwords (written down) work?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I have an account and pay the subscription each month. I have a laptop and desktop and both gave me access to my programs and now for some reason any my office won't let me connect and none of my programs work on my desk?

  I have an account and pay the subscription each month. I have a laptop and desktop and both gave me access to my programs and now for some reason any my office won't let me connect and none of my programs work on my desk?

  You are one of the very few who would get an answer to your problem. I had a similar problem that it resolved itself.

  I haven't used my laptop for a while and during a power outage, I wanted to us my laptop. He did not move.

  Problem is that due to the power failure my internet wasn't working.

  Connecting Wi - Fi has been restored my laptop have been updated and everything worked again.

  Make sure you have internet connection on both computers.

• Esxi SSH access and locking mode

  If SSH Busybox shell access has been disabled, is there a point to activate the lock mode?

  Thank you in advance.

  While you can have SSH access disabled, vCLI remote access and access PowerCLI is still possible, unless the lock mode is activated.

  If you enable the lock mode, all remote management of the ESXi hosts (whether you use vSphere Client, vCLI/vMA or PowerCLI) must firstly be connected via vSphere server.

  I hope this helps.

• SSH access ESXi 4.1.0 fails

  Hi all

  I have a problem with SSH access on my server ESXi 4.1.0. The problem is that it keeps it all the time.

  Precesely more, I go to the tab "Configuration", "Safety profile", "Properties", "Remote Tech Support (SSH)" and configure the server running (I tried all three options). Then and for a few minutes, I can connect to the server using ssh, both with the root and non-root users. But after a few minutes the ssh server stops.

  I have no idea what's going on. Could you give me a hint to solve this problem?

  Thanls a lot for your help.

  Kind regards

  Agustin

  Hello

  Welcome to the community

  But after a few minutes the ssh server stops.

  Right, this is due to default security setting that stop ssh after a certain time (don't remember what are the exact numbers). If you want to enable SSH permanently you need to go to the screen of the ESX console and enable SSH from there

  http://vmwaremine.com/2010/10/25/how-to-enable-SSH-on-ESXi-4-1/

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Cannot install iTunes. Get the error, "this installation package cannot be opened. Verify that the package exists and that you can access.

  I can't download itunes on my computer its gives me an error saying "this installation package cannot be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package" can anyone help

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP
  http://support.Apple.com/kb/ht1925

  Hello questions, see if that helps: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/

  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Turn on Windows 7 'Compatibility Mode' to iTunes:
  http://www.PCWorld.com/article/188534/turn_off_windows_7_compatibility_mode_for_itunes.html

  Windows reports that iTunesSetup.exe is not a valid Win32 program
  http://support.Apple.com/kb/TS1406

  First of all check if you have a version of 32 or 64-bit Windows:
  1) click the Start button, right-click computer and then click Properties.
  (2) in the system, see the system type - it will say either 32 or 64 bits.
  (3) download the appropriate version using the links.

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  Make sure that the "Windows Installer" service is running, or force start to begin.

  (1) open run, and type services.msc, and then press ENTER. You can also go
  Control Panel/Admin Tools/Services.

  (2) locate the Windows Installer in the list of installed services.

  (3) check that the status is "started".
  If the condition column is empty, right-click Windows Installer, and then select start.

  (4) If you get the error trying to force start the Windows Installer service,
  and then change the Startup Type to automatic (the default value is 'Manual').
  and then restart the computer.

  (5) very Installation Service runs after you restart the system.

  Also:
  Forum of Apple's Itunes: you can find a solution (if none of the above is of no help) to your problem when you post on their forum.

  http://discussions.Apple.com/category.jspa?categoryID=150

  J W Stuart: http://www.pagestart.com

• Change of SG 200-18 - management - VLAN / telnet/ssh-access?

  Hello

  We have a switch SG200-18 that should be used as a switch of working group in our environment (SW

  Version 1.1.1.8). In collaboration with CLI on big and mid range Cisco gear during the past two decades, I have a hard time to understand what follows on the SG200:

  (o) I want to change the management VLAN by default '1' to the management - VLAN used in our environment. Of course, I created this vlan in SG200-config, however when it comes to assign the management IP and VLAN management interface in the advancement of the corresponding film under "Interface IPv4-> management VLAN" selectable is the default "1". see screenshots (closed)

  So, how to define a management VLAN 1 different?

  (o) how to enable telnet/ssh-access the SG200-18 - I'd be much more comfortable with a CLI environment ;-)

  Thank you very much in advance for your help,.

  -ewald

  Hello Ewald,

  Sx200 series switch does not currently offer a CLI option. Have this feature if the Sx300 and 500 series.

  What about chaning the vlan management, you have two options.

  (1) changes the vlan by default under management VLAN > Default vlan settings. This will change all the ports and the management vlan.

  (2) adds a port as a port untagged in the new VLAN. Once this is done, make sure that something is connected to this port, like a computer. Now you should be able to change the vlan management. (This is done to prevent locking)

• Simple Question SSH Access-List

  I am allowing SSH access for all of our Cisco devices and you want to restrict access to all the following ip addresses: 192.168.200.1 - 192.168.200.50.  I forgot the exact configuration of access list to achieve this.  The subnet is 24 and I don't want the whole subnet - seulement.1-. 50.

  Thank you

  Thomas Reiling

  Hello

  If you use ssh, make sure that you have a domain name, host name and a rsa key is generated.  Assuing you have done this, the command vty ACL and following line will do the trick.  Note that the host 1-50 list is not on a subnet barrier.

  To get it exactly

  access-list 1 remark MANAGEMENT ALLOW
  access-list 1 permit 192.168.200.0 0.0.0.31

  access-list 1 permit 192.168.200.32 0.0.0.15

  access-list 1 permit 192.168.200.48 0.0.0.1

  host access-list 1 192.168.200.50

  access-list 1 refuse any newspaper

  It would be a good idea to put it on a limit, however, so the following would be much simpler and easier to read.

  access-list 1 remark MANAGEMENT ALLOW
  access-list 1 permit 192.168.200.0 0.0.0.63

  access-list 1 refuse any newspaper

  Apply the class of access on the vty lines and authentication, I would put something there too.

  line vty 0 4
  access-class 1
  entry ssh transport

  password Bonneau

  That should do it.

  Good luck!

  Brad

• SSH access to PIX

  Hello

  I have a PIX 515. I set up SSH access to the external interface. But if I access denied with connection error.

  Invalid message type

  I set up a user name with privileg password all. Siftware is Version 6.2.

  Access with PDM works very well.

  someone an idea?

  Thank you

  First of all you have todo the foillowing

  hostname XXXXXXXX

  Domain XXXXXXXX

  passwd XXXXXXX (this is the password used to authenticate Telnet / SSH)

  Then, you create a pair of RSA keys

  CA generates the key rsa 512 (check this command you can have fun with levels of encryption, that is to say 512 or 1204)

  Allow ssh hosts/networks to your PIX

  SSH #ip address or network # #subnet mask # #interface #.

  FOR EXAMPLE

  If my external IP address my 1.1.1.1 and I needed to access your pix, you will need to enter the following command

  SSH 1.1.1.1 255.255.255.255 outside

  If you get the prompt for a user name try pix, I use software very good LSVCCs of terminal.

  Thank you

  RG

• PIX behind Cisco 1841 - need SSH access

  Hello, trying to enable SSH access to PIX for some external host clinets.

  What are the correct Acl I need?

  Exactly correct...

  1 - on the router, you must allow incoming TCP 22 (ssh) to your PIX on the external interface of the router and also allow the flow back of the PIX inside interface of the router.

  2. - to the PIX you must generate rsa keys and save them.

  CA generates the key rsa 1024

  CA save all

  3 - on the pix you will need to allow ssh acccess to you outside of the interface

  SSH outdoors

  Write it down if you find it useful

• I need help to disable Adobe CS6 on a device that was stolen and I have more access to what I can reinstall on a new computer. Can you please help?

  I need help to disable Adobe CS6 on a device that was stolen and I have more access to what I can reinstall on a new computer. Can you please help?

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• Difference between Shell ESXi and active with SSH PuTTY?

  Hello

  We used to activate SSH and PuTTY to connect to 5.5 ESXi host.

  However, a consultant suggested allow ESXi Shell and access it via DCUI.

  Would just like to ask you what is the difference between these 2 methods of access?

  Thank you

  Accusing Shell of ESXi is available by using two different ways.

  (1) local access to the shell of ESXi is available turning and by using directly from DCUI (Alt + F1), safer, since it is connected locally

  (2) remove access to the shell of ESXi is available by activating SSH Shell and using the SSH Client such as PUTTY etc to access. Since it is remote access, security is a bit of a cause for concern.

  This is the reason, the suggestion to use locally DCUI is given.

• I downloaded this new program, and none of my music videos work. What should I do?

  I downloaded the new sierra and none of the videos of music works. What should I do?

  What have you downloaded?

• All of a sudden I lost all my emails and none are pass, even if they are still going to my computer. I checked in settings and the e-mail address is still there. Help!

  I suddenly lost all my emails on my Ipad and none are pass, even if they are still going to my computer. I checked in settings and the e-mail address is still there. Help!

  Have you tried to delete the account and adding it back?