SSH access ESXi 4.1.0 fails

Similar Questions

• Esxi SSH access and locking mode

  If SSH Busybox shell access has been disabled, is there a point to activate the lock mode?

  Thank you in advance.

  While you can have SSH access disabled, vCLI remote access and access PowerCLI is still possible, unless the lock mode is activated.

  If you enable the lock mode, all remote management of the ESXi hosts (whether you use vSphere Client, vCLI/vMA or PowerCLI) must firstly be connected via vSphere server.

  I hope this helps.

• Erro ao access ESXI pelo PUTTY

  OLA pessoal, ler meu primeiro Server esxi instalei e não estou access acessa-lo through SSH, os principle seguifos fotso o artigo: http://www.thomasmaurer.ch/2010/07/activated-ssh-on-esxi-4-1
  

  para enable o ssh without server very agora quando tento access PuTTY ocorre pelo o seguinte erro:

  

  a porta 22 esta respondendo pq is dou um telnet no servidor na porta 22 can a resposta:

  

  printing services at sendo executados back:

  

  alguem ja passou por uma dessas down?

  Obrigado.

  Guy, e o seguinte, c:\

  1 - voce ta tentando logar not ssh por chaves troca (priv / pub)? Veja ai is ta marcado isso no seu not PuTTY.

  2 - Voce ja acessou uma Máquina com o mesmo por ssh ip e talvez has problemas com o of fingerprints.

• Change of SG 200-18 - management - VLAN / telnet/ssh-access?

  Hello

  We have a switch SG200-18 that should be used as a switch of working group in our environment (SW

  Version 1.1.1.8). In collaboration with CLI on big and mid range Cisco gear during the past two decades, I have a hard time to understand what follows on the SG200:

  (o) I want to change the management VLAN by default '1' to the management - VLAN used in our environment. Of course, I created this vlan in SG200-config, however when it comes to assign the management IP and VLAN management interface in the advancement of the corresponding film under "Interface IPv4-> management VLAN" selectable is the default "1". see screenshots (closed)

  So, how to define a management VLAN 1 different?

  (o) how to enable telnet/ssh-access the SG200-18 - I'd be much more comfortable with a CLI environment ;-)

  Thank you very much in advance for your help,.

  -ewald

  Hello Ewald,

  Sx200 series switch does not currently offer a CLI option. Have this feature if the Sx300 and 500 series.

  What about chaning the vlan management, you have two options.

  (1) changes the vlan by default under management VLAN > Default vlan settings. This will change all the ports and the management vlan.

  (2) adds a port as a port untagged in the new VLAN. Once this is done, make sure that something is connected to this port, like a computer. Now you should be able to change the vlan management. (This is done to prevent locking)

• Simple Question SSH Access-List

  I am allowing SSH access for all of our Cisco devices and you want to restrict access to all the following ip addresses: 192.168.200.1 - 192.168.200.50.  I forgot the exact configuration of access list to achieve this.  The subnet is 24 and I don't want the whole subnet - seulement.1-. 50.

  Thank you

  Thomas Reiling

  Hello

  If you use ssh, make sure that you have a domain name, host name and a rsa key is generated.  Assuing you have done this, the command vty ACL and following line will do the trick.  Note that the host 1-50 list is not on a subnet barrier.

  To get it exactly

  access-list 1 remark MANAGEMENT ALLOW
  access-list 1 permit 192.168.200.0 0.0.0.31

  access-list 1 permit 192.168.200.32 0.0.0.15

  access-list 1 permit 192.168.200.48 0.0.0.1

  host access-list 1 192.168.200.50

  access-list 1 refuse any newspaper

  It would be a good idea to put it on a limit, however, so the following would be much simpler and easier to read.

  access-list 1 remark MANAGEMENT ALLOW
  access-list 1 permit 192.168.200.0 0.0.0.63

  access-list 1 refuse any newspaper

  Apply the class of access on the vty lines and authentication, I would put something there too.

  line vty 0 4
  access-class 1
  entry ssh transport

  password Bonneau

  That should do it.

  Good luck!

  Brad

• SSH access to PIX

  Hello

  I have a PIX 515. I set up SSH access to the external interface. But if I access denied with connection error.

  Invalid message type

  I set up a user name with privileg password all. Siftware is Version 6.2.

  Access with PDM works very well.

  someone an idea?

  Thank you

  First of all you have todo the foillowing

  hostname XXXXXXXX

  Domain XXXXXXXX

  passwd XXXXXXX (this is the password used to authenticate Telnet / SSH)

  Then, you create a pair of RSA keys

  CA generates the key rsa 512 (check this command you can have fun with levels of encryption, that is to say 512 or 1204)

  Allow ssh hosts/networks to your PIX

  SSH #ip address or network # #subnet mask # #interface #.

  FOR EXAMPLE

  If my external IP address my 1.1.1.1 and I needed to access your pix, you will need to enter the following command

  SSH 1.1.1.1 255.255.255.255 outside

  If you get the prompt for a user name try pix, I use software very good LSVCCs of terminal.

  Thank you

  RG

• PIX behind Cisco 1841 - need SSH access

  Hello, trying to enable SSH access to PIX for some external host clinets.

  What are the correct Acl I need?

  Exactly correct...

  1 - on the router, you must allow incoming TCP 22 (ssh) to your PIX on the external interface of the router and also allow the flow back of the PIX inside interface of the router.

  2. - to the PIX you must generate rsa keys and save them.

  CA generates the key rsa 1024

  CA save all

  3 - on the pix you will need to allow ssh acccess to you outside of the interface

  SSH outdoors

  Write it down if you find it useful

• [SOLVED] How to create public keys to ssh to ESXi to another host?

  I have read a number of different sites trying to find information on how to do it properly, but I had no luck.  I'm afraid at this point I'm all mixed up or miss me something simple [painfully].

  My goal is to create keys so that I can ssh/scp, as root, the ESXi server to another server in linux/unix under a different name.  Most, if not all of the sites I found coverage today the reverse: ssh/scp from another machine to the ESXi server.  I assume that ssh ESXi-> another host via keys is possible...?

  I believe that I'm almost there, but in all honesty, I don't know.  Here's what I've done so far.

  • RSA and DSA keys with dropbear created on the ESXi Server
  • convert keys RSA and DSA dropbear ssh format
  • Cat's public RSA and DSA keys in the ~/.ssh/authorized_keys on the server that I would like to ssh/scp
    • even tried to make a copy of authorized_keys as authorized_keys2 on the destination server
    • same CAT had the public keys of the ESXi authorized_keys & authorized_keys2
  • went up to copy the private key (!) from the ESXi server on the server I ssh/scp area in

  In regards to the box, I'm remote in I

  • keys generated with ssh-keygen - t dsa and rsa
  • typed in a sentence
  • CAT had the public key in .ssh/authorized_keys on ESXi box
    • as above in desperation I added it in the file authorized_keys local
    • copied authorized_keys to authorized_keys2
  • copied private keys (!) of the destination inbox ESXi machine

  I tried ssh username FQDN, ssh username@FQDN-l and with the IP address itself, whenever I was asked for a password.  Naturally if I just ssh hostname it trying to connect as root, which is not allowed and will fail.  Again, I apologize because I'm probably all mixed now. might be wise to simply erase all keys & start over.

  Is this possible?

  Is anyone interested in lending a hand?

  Resources

  http://communities.VMware.com/message/1373428#1373428

  http://communities.VMware.com/docs/doc-8890

  http://pkeck.myWeb.uga.edu/SSH/

  http://computerpr0n.com/2011/04/ESXi-remote-management-part-2/

  http://oreilly.com/pub/h/66

  I blogged about this recently:

  http://blog.Cowger.us/?p=15

• ESXi 4.1 gss_acquire_cred failed when connecting

  I have an ESXi 4.1 with the free license installed on a Dell Poweredge 1950. I joined it to our domain Active Directory and everything was working great until yesterday. Whenever someone tries to login with 'Use Windows Session Credentials', it will fail with a simple dialog box to the customer indicating 'gss_acquire_cred failed' and 'Ok '. If I manually type domain\username and password, it connects fine. What is happening on both XP and Win7 clients. I first thought that it was a customer problem isolated until I started to do as well - then I saw errors in the hostd.log on the server. I tried to restart the server without effect. Any ideas?

  2010-09-01 14:46:03.179 3B340B90 verbose "HTTP server" Sent in response to CHIEF /client/clients.xml (of/usr/lib/vmware/hostd/docroot)

  2010-09-01 14:46:03.259 3B340B90 error "GSSAPI" opID = gss_acquire_cred 00000003 ED424956 failed: (0x000d0000, 0x96c73aa9)  

  2010-09-01 14:46:03.259 3B340B90 info "App" opID = ED424956-00000003 AdapterServer caught exception: 3b6074b0

  2010-09-01 14:46:03.259 3B340B90 "Vmomi" = ED424956-00000003 opID info Activation N5Vmomi10ActivationE:0x3b21dfb0 : invoke made on vim. SessionManager: ha-sessionmgr

  2010-09-01 14:46:03.259 3B340B90 'Vmomi' verbose opID = ED424956-00000003 Base64Token ARG:

  -snip-.

  2010-09-01 14:46:03.260 3B340B90 'Vmomi' verbose opID = ED424956-00000003 Local ARG:

  "en_US".

  2010-09-01 14:46:03.260 3B340B90 "Vmomi" = ED424956-00000003 opID info Launch vmodl.fault.SystemError

  2010-09-01 14:46:03.260 3B340B90 "Vmomi" = ED424956-00000003 opID info Result:

  {(vmodl.fault.SystemError)

  dynamicType = & lt; unset & gt;

  faultCause = (vmodl. NULL in MethodFault),

  {color: #ff0000} reason = "gss_acquire_cred failed."

  MSG = ""

  }

  Here is how I fixed the issue of credentials of Session Windows journal.

  SSH on the ESXi host.

  Change directory to/scratch/var/tmp

  Delete the host_0 file (or move it to another location if you want to play safe).

  By using the vSphere client, open a session on the ESXi host by selecting the option use Windows logon credentials.  This should work, and host_0 gets recreated.

  I have to admit, I don't know what this file is or how it suddenly is corrupt, but recreate is seems to fix the problem.

• Root AND non-root ssh access

  Hello

  Is it possible to leave the root and non-root ssh users access on a server esxi (3.5).

  I like my scripts to a minimum access but keep my root access on the server.

  The solution w on the yellow bricks, where everything indicates, disables the root access.

  Thank you

  The user that you create has a valid shell?

  During the user add (using VIC), you can specify this option... or you need to check/etc/passwd to see if the shell is the same of the root user.

  André

• Access Installation Point but Xbox fails the test of the IP

  I have the WAP54 access point, I talked to my son through the configuration using his laptop. The Assistant said that it has been successfully configured. Then he connects his xbox 360 in the access point and the connection test fails on the IP address. "Fails to negotiate the IP address ' I'm stuck please help.

  Router-wireless-> Wi - Fi Point - wired-> Xbox 360

  Don't I have that right?

  Which makes life simple.

  Configure the WAP54G in AP Client mode.

  Assing it a unique IP address that corresponds to your current network (same subnet as your WRT54G)

  Set the Degault gateway to the IP address of your WRT54G

  Now when you place the WAP54G in AP Client mode you will need to do a site survey and select the SSID of your WRT54G. This will link the WAP54G with the WRT54G in the same way as a standard client.

  Set IP address of the XBOX manually again with unique IP address. The gateway and the DNS will be the IP address of your WRT54G.

  Don't forgget to set security on the WAP54G is the same as the WRT54G.

  Who should you get.

  Concerning

  Fred

• SSH access to ASA

  I can not access our ASA 5505 over SSH from outside. I set this through the ASDM to allow SSH (device management > access management > ASDM, HTTPS, Telnet, SSH). I have added a rule that allows the SSH on the external interface 0.0.0.0 0.0.0.0. When I try to ssh with putty, he says 'network connection closed unexpectedly server' when I look at the logs on the ASA, it shows a Built inbound TCP connection on port 22, but then immediately a disassembly TCP connection. It does not show that it is blocked by any rule. Is there something that I am missing about the SSH activation?

  Thank you

  Scott

  Hello

  In addition to the hosts permitted to SSH for the SAA, you must set the RSA keys for the secure connection.

  In the CLI:

  generate encryption rsa key

  For these keys to work, you should have a name of host/domain configured on the SAA so name (unless you configure a dedicated RSA keys).

  So basically, configure a host name, domain name and generate the RSA key pair:

  hostname NAME_OF_ASA

  NAME_OF_DOMAIN domain name

  generate encryption rsa key

  Accept the default of 1024 and it should work.

  Federico.

• OME 1.3: update R910 5.5 ESXi host through iDrac fails

  OME 1.3 fees deployed on a Server R2 Windows Server 2012. OME server is in the same subnet as the iDRAC.

  OMSA agent for ESXi 5.5 deployed, but not relevant since the updates of the system OME uses iDRAC for ESXi hosts.

  The R910 was discovered and inventoried by WS - MAN on iDRAC and OMSA bot successfully.

  Trying to make an update of the system. I find the server in noncompliant systems, select it, select all 4 applicable updates.

  I apply and provide the login of the iDRAC.

  The task fails with errors below:

  -J' tried with the online catalogue Dell as well as a local Manager of Repositry

  -J' noticed that the 4 updates all point to pacaages in. EXE format. Since the deployment through iDRAC they shouldn't be. BIN files?

  Results:
  Download the packages.
  The call of method InstallFromUri to download packages to the iDRAC

  Error occurred: A security error occurred
  Username and password are not valid or

  The component that is being updated is not valid. Re-run the inventory in order to determine the correct component, and then try again

  Error occurred: A security error occurred
  Username and password are not valid or

  The component that is being updated is not valid. Re-run the inventory in order to determine the correct component, and then try again

  Error occurred: A security error occurred
  Username and password are not valid or

  The component that is being updated is not valid. Re-run the inventory in order to determine the correct component, and then try again

  Error occurred: A security error occurred
  Username and password are not valid or

  The component that is being updated is not valid. Re-run the inventory in order to determine the correct component, and then try again
  Check the following: entered credentials are valid, iDRAC is accessible from the host OME and iDRAC is in good condition. IDRAC was unable to download all the packages.
  The task of software update failed.

  Hi Roger,

  Two questions:

  • What is the version of your R910 iDRAC6?
  • If you run the following command, then what is the result you get?

  WinRM e cimv2/root/dcim/DCIM_LifecycleJob - u: - p: - r: https: / //wsman:443 - SkipCNCheck - SkipCACheck - SkipRevocationCheck - auth: base - encoding: utf-8

  • Is it possible to restart your server? If so, can you check if CSIOR is enabled on the server and are you able to see running system services?

  You can get information about CSIOR on this link:

  http://en.community.Dell.com/TechCenter/systems-management/f/4494/p/19515744/20413397.aspx#20413397

• Installation license ESXi on UCS B200M2 fail

  I tried to seized in the license of VMware ESXi 4.1 of vSphere client and all in the 16 keys were always failed with the message "invalid on this product.

  I installed using the Cisco's ISO image "VMware-VMvisor-Installer - 4.1.0 - 260247_Cisco.iso ' on the B200M2 server. Product license code is VMW-VS-ENTP-1 =, the license key format is XXXXX-XXXXX-XXXXX-XXXXX-XXXXX.

  Has anyone registered license ESXi on UCS B series and able to enlighten me? Thank you

  Hi Robin

  Assuming your XXXX refers to PAKs of Cisco, the Cisco PAKs, you received should be exchanged through the VMware specific OEM portal. You will then receive emails of VMware with the VMware license. It is these received licenses of VMware, which can then be placed in the portal of VMware licenses so that they can be stored and managed.

  The following links explain the entire procedure and the second link contains a video showing the process.

  Overview of the OEM Portal:

  http://www.VMware.com/support/licensing/OEM-help.html

  VMware activation codes Partner (CAP) explained

  http://KB.VMware.com/kb/1003303

  Hope that helps clarify things.

  Thank you

  Michael

• SSH access to LWAPP Access Point

  Hello

  I have just a question about the access point (in LWAPP) using SSHv2.

  When can I see the beginning of the AP (in my case a 1242AG) the SSHv2 is enabled, but when I try to connect to the AP by SSH, my SSH connection is cancelled immediately.

  My access point is connected to a switch (i.e: Cisco 3560).

  And another question on this topic... Why that I can ping my LWAPP AP when it is connected to a switch and not when it is connected directly to the WLC (in my case a WLC 2106).

  Many thanks and best wishes,

  Jeff,

  4.1 you can actually enable telnet or ssh by using this command:

  config ap ssh enable

  allow config ap telnet

  But you must assign a user name and password by entering:

  config ap ID password all the