root.sh defect on the second node with ' ora.asm - init ' failed

Similar Questions

• Grid Infra configuration failed when running root.sh on the second node

  Hello world.

  I am new guy on RAC environment. When you try to install Oracle RAC on the local environment, I had this problem:

  -J' have run root.sh successfully on a local first node

  -After that, the first node, there are 3 cards of virtual network created to SCAN listening addresses

  -After the success of action on the first node, I tried to run this script on the second node, but the error occurred:

  CRS-2676: Start of 'ora.DATA.dg' on 'dbnode2' succeeded
  PRCR-1079 : Failed to start resource ora.scan1.vip
  CRS-5017: The resource action "ora.scan1.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.124 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan1.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan1.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan2.vip
  CRS-5017: The resource action "ora.scan2.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.122 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan2.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan2.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan3.vip
  CRS-5017: The resource action "ora.scan3.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.123 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan3.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan3.vip' on that would satisfy its placement policy
  
  start scan ... failed
  FirstNode configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 9379.
  /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  

  I tried again with several times (with left-hand) but the problem was still there. Can you explain to me?

  -Why, after running root.sh on the first node, all IP SCANNER interfaces was created on this node? This is the reason why root.sh fails on the second node.

  -How to solve?

  I use the server for address scan local DNS resolves to 3 IPs, and I can run script runcluvfy.sh with success on both nodes.

  I thank in advance

  PS:

  I use two virtual machines in vmware. After running root.sh on the first node, I checked and found this funny information:

  [oracle@dbnode1 sshsetup] $ / sbin/ifconfig

  eth0 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.66 Bcast:192.168.50.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:431 b / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 249814 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 2956882 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 24913472 (23.7 MiB) TX bytes: 4369984705 (4.0 GiB)

  eth0: 1 link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.120 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:2 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.122 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:3 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.123 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:4 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.124 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:192.168.29.10 Bcast:192.168.29.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:4325 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 471 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 664 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 82216 (80.2 KiB) TX bytes: 107920 (105.3 KiB)

  eth1:1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:169.254.75.201 Bcast:169.254.255.255 mask: 255.255.0.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  ADR inet6:: 1/128 Scope: host

  RACE of LOOPING 16436 Metric: 1

  Fall of RX packets: 10626 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 10626 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 7942626 (7.5 MiB) TX bytes: 7942626 (7.5 MiB)

  I think it's because of the failure on node 2

  UPDATE:

  That thing is normal, I ignored it and the installation can continue normally. Thank you all for your help.

• error after you run root.sh on the second node

  Hello
  
  I installed the clusterware on a system with 2 nodes running on RHEL 5
  
  I followed the prereqs and fix all the errors I've met
  
  After the installation of clusterware, he asked me to run root.sh on all nodes
  
  When I run root.sh on the second node
  
  It gave this error
  
  Vipca (silent) to configure applications running
  / Home/Oracle/CRS/Oracle/product/10/CRS/JDK/JRE / / bin/java: error loading
  shared libraries: libpthread.so.0: cannot open shared object file:
  No such file or directory
  
  so I followed metalink notes 414163.1
  
  After that I called it a day
  
  in the morning, will receive it started both nodes
  
  and started on the second node vipca
  
  It gave this error
  
  Unable to communicate with the services of crs PRKH:1010
  
  
  
  i ran ps - ef | grep crs
  
  root 3201 1 0 15:37? 00:00:00 / bin/sh /etc/init.d/init.crsd run
  
  crsctl check crs gave
  demon of css contact failure 1
  cannot communicate with the crs
  cannot communicate with evm
  
  
  What should I do to start these services?

  raw devices ownership is changed back to the root after reboot, which is why its usual practice to add chown/chmod to /etc/rc.local for example:

  chown oracle: oinstall/dev/sde1
  chown oracle: oinstall/dev/sdf1
  chmod 600/dev/sde1
  chmod 600/dev/sdf1

• ASM disk added without scan on the second node

  Hi all

  Oracle Version: 11.2.0.3

  I need a help for a problem with the addition of ASM disks.

  It is a node two CARS and a disk group was filled.

  A drive was available as UNUSED001 and so we renamed it ran scan disk and disk added to the diskgroup on node1.

  But, as we have not run scan disk on the second node, the name is still the poster as UNUSED001 and assigned to diskgroup showing as a MEMBER.

  In addition, the renamed disk shows as a MEMBER but not attributed with any diskgroup.

  Usually, when this heppens we have to restart the node to solve the problem, but would like to get idea if this can be fixed without bouncing nodes.

  I restarted node and that fixed the issue.

  Closing this thread.

  Thank you guys.

• Best practices - addition RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Addition of RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Unable to find another thread on this

  When you add RAW disks to the second node in Virtual Machines across physical hosts in the Cluster / Cluster across boxes,.

  VMware said shared point of the storage drives in the same location as the first node sharing storage disc *.

  -Select use an existing virtual drive...

  -In the drive path, navigate to the location of the disk (quorum) specified for the first node

  -Select the same virtual device node you chose for the first virtual machine shared storage disks, IE SCSI (1:0)...

  In other words to add the RDM to mscs-node2, navigate to/vmfs/volumes/lun1/mscs-node1 / mscs - node1_2.vmdk (mscs-node1_2 - rdmp.vmdk)

  For years we have directly added the ROW the second node specifying RDM disk not existing does not, in general we do directly from the host, not the vCenter, it seems to work fine.

  For what is the safest way, the official method can cause all sorts of problems if you need to cancel the registration of the ROW on the first node (here's where I found no official documentation).

  Delete you or keep the file descriptor? We tried to keep him, but ended up with several mappings to la.vmdk/rdmp.vmdk, so now, this system has disk2_.vmdk / disk2_ - rdmp.vmdk and disk4_.vmdk / disk4_ - rdmp.vmdk pointing to the same RAW.

  What really bothers me is safety, these are very important boxes, I prefer to continue to have the VMDK and rdmp.vmdk in separate data warehouses, and do not have this dependence on the head node

  Your comments please, we are viewing the store only setup of MSCS clusters with lanes separated from RDM and are there risks associated with this?

  * Ref: "Setup for Microsoft Cluster Service - 4.1 and Failover Clustering".

  I realize there was an error in my logic

  When you work with the main node, if there is a requirement to unmap drives ROUGH (move to another cluster vmware, cloning the system etc.)

  Take note of the location of all the rdmp.vmdks

  Remove each rdm disk without deleting

  To add

  Add "Use an existing virtual disk to disk" (yes I know its bad, but once you create the host calling now think its virtual)

  Navigate to the mapping of existing raw device, appearing like a vmdk * and add using the former location of scsi

  Graphic interface hides the descriptor

  A virtual disk has a vmdk and a flat.vmdk

  A CRUDE disk has a vmdk and a rdmp.vmdk (the dish is replaced by vocation)

  A suggestion of one of my companions is to locate the al the ROW in a single data store small, visibility of virtual machines with raw disk went like this

• 11 GR 2 RAC - Database Control - agent system of is not the second node

  I have a new system of the RAC node 2 11 GR 2 RHEL5 64 bit - it's a testbed at the moment. I installed Database Control because at the moment I don't have a separate grid control server available for this configuration. After you run DBCA, control of the database has started very well, and I could connect to the console and see the two available nodes. On a subsequent restart of the two nodes, I can start the dbconsole leave the first node, but the agent does not start on the second node. My understanding is that spear the dbconsole of node 1 should start the agents on both nodes. Is this correct? I don't know why the agent is not running or implementation on the second node. How can I start it? GC, I could do emctl start the agent, but apparently for the control of the database, this isn't an option.
  
  Node1:

  [oracle@node1 db_1]$ emctl status dbconsole
  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
  Copyright (c) 1996, 2009 Oracle Corporation.  All rights reserved.
  https://node1.com:1158/em/console/aboutApplication
  Oracle Enterprise Manager 11g is running.
  ------------------------------------------------------------------
  Logs are generated in directory /u01/app/oracle/product/11.2.0/db_1/node1_saastexd/sysman/log
  
  [oracle@node1 db_1]$ emctl status agent
  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
  Copyright (c) 1996, 2009 Oracle Corporation.  All rights reserved.
  ---------------------------------------------------------------
  Agent Version     : 10.2.0.4.2
  OMS Version       : 10.2.0.4.2
  Protocol Version  : 10.2.0.4.2
  Agent Home        : /u01/app/oracle/product/11.2.0/db_1/node1_clusterdb
  Agent binaries    : /u01/app/oracle/product/11.2.0/db_1
  Agent Process ID  : 18120
  Parent Process ID : 18073
  Agent URL         : https://node1.xxx.com:3938/emd/main
  Repository URL    : https://node1.xxx.com:1158/em/upload/
  Started at        : 2010-04-27 16:49:17
  Started by user   : oracle
  Last Reload       : 2010-04-27 16:59:28
  Last successful upload                       : 2010-04-27 17:04:34
  Total Megabytes of XML files uploaded so far :     2.54
  Number of XML files pending upload           :        0
  Size of XML files pending upload(MB)         :     0.00
  Available disk space on upload filesystem    :    58.40%
  Data channel upload directory                : /u01/app/oracle/product/11.2.0/db_1/node1_clusterdb/sysman/recv
  Last successful heartbeat to OMS             : 2010-04-27 17:04:35
  ---------------------------------------------------------------
  Agent is Running and Ready

  Node 2
  

  [oracle@node2 oracle]$ emctl status agent
  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
  Copyright (c) 1996, 2009 Oracle Corporation.  All rights reserved.
  ---------------------------------------------------------------
  Agent is Not Running

  I can't see what follows from sysman/log/emagent_perl.trc on the first node:
  

  ties line no. 75
  maxRowCount.pl: Tue Apr 27 16:49:19 2010: ERROR:  Max Count Value not set properly in file /u01/app/oracle/product/11.2.0/db_1/sysman/config/esa/database.proper
  ties line no. 77

  I admit that I am more familiar with GC than DC, although not at all an expert. Any ideas?

  You must leave dbconsole time node. from the dbconsole will start the agent, there is no agent seprate for dbconsole

• Want to ask if the second pc with ssd may be authorized by the same key as magnetic

  HI.i have a desk with two internal disks.one magnetic and I a ssd.in the first 10 of an update of windows windows 7 .i want to ask if the second pc with ssd may be authorized by the same key as magnetic

  Hello

  Thanks for the reply.

  It is good to know that you have obtained the required information.

  Please do not hesitate to answer, if you have any other questions about Windows.

  Thank you

• Secondary ISE cannot join the head node with error message

  Hello

  I just installed the secondary ISE and made the following points, but when I try to reach the head node, I received the cannot authenticate the primary ISE, please check the server or the certificate and try again.

  -promote the secondary image of autonomous primary

  -export the seconary cert self

  -import the cert in primary school

  -try to add not on the used secondary IP and host with super admin user name

  I noticed one thing that instruction on the ISE 1.1.1 import cert on mentioned primary section:

  1. Choose Administration > system > certificates.
  2. In operations of certificate on the left navigation pane, click certificate authority certificates.

  but there is no certificate authority certificates in the left pane. I chose to store the certificates instead

  

  any suggestions?

  Hello

  Did you put the primary secondary node? You tried to save the node in the wrong direction. To register with the primary node of a node, the application for registration must be initiated from the primary node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Install the second instance with tns own

  Hello world

  I depending on the situation: we have Windows 2008 Server, I installed oracle 11g Standard Edition database. I want to install a second instance on this server.

  I try to use oracle database configuration manager and the installation was successful. But I can't connect to my trial because I got the error 'No TNS Listner'.

  So I create a second with the oracle network utilities. But I can not connect to the server, so I take a look at the service, there where two headphones started my new and TNSListener so I looked in the listener.ora there where only my new listener.

  After that, I restart the database but I sill got the error message and I could not service my trial dbconsole.

  So I remove the second instance.

  I want to ask if anyone has a tip for me or a best practice how to install a second instance with an own listener.

  Greetings

  How to install a second instance with an own listener.

  You need a listener of the second. Simply create the new database and your real listener is more than enough.

• Duplicate option data address for the second plaintiff with a checkbox

  I have been in charge of research and trying things out for hours, without success.

  I don't know if it's about PDF forms or if I should post on the forum of Java, but here it is:

  I have a PDF form with several fields to send the address (address, city, province) data. The application also has a box on another page of the form to a second applicant. The second applicant is a playground of their mailing address too.

  I would like to create a box for the second plaintiff who says 'Even that first applicant', so that if the address data is checked all three fields automatically fill the same information that were completed for the first applicant in these areas.

  I guess it could be something that required some custom JavaScript, but I know very little about how to write code. I've tinkered with a few think that I found online, but nothing seems to work. Any information that could help me would be very appreciated.

  A little more complicated, but not by much. So basically, you can use this script as the box MouseUp action (notice, I used here generic domain names, you can replace them with real numbers in your file):

  if (event.target.value=="Off") { // the box is NOT ticked
      this.getField("Target1").value = "";
      this.getField("Target2").value = "";
      this.getField("Target3").value = "";
      this.getField("Target4").value = "";
      this.getField("Target1").readonly = false;
      this.getField("Target2").readonly = false;
      this.getField("Target3").readonly = false;
      this.getField("Target4").readonly = false;
  } else { // the box IS ticked
      this.getField("Target1").value = this.getField("Source1").valueAsString;
      this.getField("Target2").value = this.getField("Source2").valueAsString;
      this.getField("Target3").value = this.getField("Source3").valueAsString;
      this.getField("Target4").value = this.getField("Source4").valueAsString;
      this.getField("Target1").readonly = true;
      this.getField("Target2").readonly = true;
      this.getField("Target3").readonly = true;
      this.getField("Target4").readonly = true;
  }
  

• CARS > cannot start the DEV database on the second node after clone of PROD

  2 node RAC
  
  Example 1: DEV11
  Example 2: DEV12
  
  Database version: 10.2.0.5.0
  OS: RHEL 5.5
  
  After clone database, we can only bring to the top of the database on node 1. After the start of the database in the instance DEV11, we cannot raise the database in the instance DEV12. After the start of the database in DEV12, we cannot raise the database pending DEV11.
  
  We receive an error ORA-00600 message.
  
  SQL > startup;
  ORACLE instance started.
  
  Total System Global Area 4429185024 bytes
  Bytes of size 2102032 fixed
  1191185648 variable size bytes
  Buffers data 3221225472 bytes
  Redo buffers 14671872 bytes
  ORA-00600: internal error code, arguments: [kccsbck_first], [2], [1523689643],
  [], [], [], [], []
  
  We went through the following Notes:
  
  ORA-600 [kccsbck_first] - what to check [157536.1 ID]
  
  Bug 2646914 : ORA-600 [KCCSBCK_FIRST], [2] IF ORACM & ORACLE has BEEN RESTARTED ON a NŒUD
  
  DIAGNOSTIC TEST:
  On the failed node, alert.log has a line which reads: "this instance was the first to climb." This is not true. The DB has been mounted on the other node.
  
  Rebound of the proceeding on the other node does not solve our problem.
  
  Ran also, what follows on both nodes, but that didn't help either.
  
  crsctl stop crs
  crsctl start crs
  
  Any advice would be appreciated... Thank you!

  See if the docs from metalink following can help you. Otherwise, please open SR with Oracle.

  1 ORA-600 [kccsbck_first] - what to check [157536.1 ID]
  2 commissioning (editing) of 2nd instance RAC fails with ORA-00600 [kccsbck_first] [395156.1 ID]

  Thank you
  http://swervedba.WordPress.com/

• Need the sound to play on imported into the second swf with loadMovie swf

  I have a movie of parent with a couple of movieclips placeholder in this regard. I use the loadMovie to load 2 separate swf on the spaces reserved for execution:
  
  a swf contains the sound, which I initialize it using the following:
  
  sounds = new Object();
  sounds.reelSpin1L = new Sound();
  sounds.reelSpin1L.attachSound ("reelSpin1L.wav");
  
  now, I also wrote a function inside this same swf, which I want to call from a second swf file, which reads:
  function playReelSpin() {}
  sounds.reelSpin1L.start (0, 99);
  trace ("play music ReelSpin!");
  }
  trace ("the sound played");
  
  
  Now when I call the function from the other swf when running, I see the trace on the output window message, but I don't hear the sound!
  
  The weird part is, when I run the first swf that I've initialized the sound and call the function, it works very well.
  
  In conclusion, so I need to know why the sound won't play on a swf that was loaded into another swf when running.
  
  I appreciate any help you can provide.
  
  -Pat Ferguson
  

  Wow! It worked! I can't believe it's that simple! I was going out of my mind for 2 days trying to figure this out too! Thank you! Thank you! Thank you!

  -Pat Ferguson

• Using WRT54G as the second wireless with E2500

  Have read the threads on this, I want to make sure I have this correct.

  Currently I use the E2500 as my main router at my house (top).  I replaced my WRT54G with the E2500 to my DSL connection throughout the House.

  I run an ethernet as a hard link at the bottom of my smart TV cable.

  I now add another device (Channel Master DVR +) that it will also take an internet connection.

  I need two connections from an ethernet cable (already run down).  After reading a bit, looks like I can use my old WRT54G as a secondary router/switch down.  (Sorry if I'm not using the correct terms).

  In order to get my two connections (Smart TV and DVR +) I need at least a separator, or something?  However... "Why not extend my lower wireless for a stronger wireless connection down?" was my way of thinking.

  How can I configure my E2500 to recognize the WRT54G - run two difficult connections to my TV and DVR + and also extend a stronger signal wireless downstairs for my daughters iPod Touch?

  Thanks - Glen

  Who did the trick! You Rock! Thank you so much cub for your help and quick of Reid. I may be back later this week when my DVR + gets here but hope not. Thanks again!

• Download lightroom 6 (for the second time) with the serial number?

  Hello, I bought adobe lightroom 6 last year and used with my iMac.
  Today, I've updated my old macbook to el capitan and now want to use it on the macbook, too. I have the order number and the serial number of my lr Bill.
  is it possible to download with these numbers on my macbook? I don't use lr on it before.
  Thanks for your help, linda

  Hi Lindab17346767,

  With your license Adobe Lightroom 6 you get two activation, therefore, you can use the same serial number to activate 6 Lightroom on this machine as well.

  Click here to download & Install Photoshop Lightroom

  See also, How to download, install and activate Adobe applications

  Let us know if that helps.

• Mapping the recurrent node with static values?

  Hello

  I have a WSDL where I need to complete a recurring field < InputField > several times with different values.

  How can I achieve this in processing or of BPEL assign?

  BPEL transform editor Screenshot http://imageshack.com/a/img33/5030/gte8.png

  My SOAP UI application looks like

  " < = xmlns:soapenv soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ ">

  < soapenv:Header / >

  < soapenv:Body >

  < int:getItem >

  <!-in option: - >

  < arg0 transactionId = ""? "sch:ItemId ="264689">"

  < sch:Username > < / sch:Username >

  < sch:Password > < / sch:Password >

  aaaa-mm-jj < sch:DateFormat > < / sch:DateFormat >

  <!-in option: - >

  .SSS aaaa-mm-jj < sch:DateTimeFormat > < / sch:DateTimeFormat >

  <!-zero or more repetitions: - >

  ID < sch:InputField > < / sch:InputField >

  < sch:InputField > summary < / sch:InputField >

  < sch:InputField > status < / sch:InputField >

  < / arg0 >

  < / int:getItem >

  < / soapenv:Body >

  < / soapenv:Envelope >

  I am just a beginner to start with BPEL, so accept my apologies if this question is fundamental very basic

  Thank you

  Hello

  I do not think that the Mapper will take in charge the creation mode, you need to change your XSLT source view in...

  Simply copy and paste the input fields is installed on SoapUI, adapt to the namespaces... That should do it...

  See you soon,.

  Vlad