Route VPN question

Here is my scenerio.

If I can get a set VPN to my internal ASA5505 unit to the remote VPN device, how can I get my local devices on the 192.168.100.0 network to be able to access the 192.168.192.3 Server.

Our normal GW is 192.168.100.254 and this cannot be changed.

Yes, if the remote subnet is 192.168.192.0/24.

Keep in mind that the other end must configure the same subnets so if you agreed on 192.168.100.0/24 to everything that you need to let them know you will be more specific and use 192.168.192.0/24 instead of everything.

Jon

Tags: Cisco Security

Similar Questions

Router VPN 3005 and 7500

Hi all

Could you someboy help me on that?

I have a network like this:

Internet Internet

| |

router VPN - 3005

|

Internal

I can set up Lan to Lan VPN 3005 and other PIX aside, but I can't ping internal network with the back of my internal network. I've already put the static route to the subnet of setbacks in the router and my subnet route internal VPN. What should I do? Thanks in advance.

Banlan

in fact the 3000 can do a ping will depend on your network-lists / lists access so that my not be a relevant question.

First router users Questions

It's my all first time owning and you use a router, so I have a few questions that I would ask.

1. my router connects (with flashing lights) constantly, or should it be unplugged when not in use? (By fear it overheats).

2. If I stay connected to a wireless port of my router at all times (on any given computer), he eats my bandwidth even if I'm not surfing the internet?

Thank you if you answer these questions a little silly. XD

For a first time router owner questions are quite normal. You can't cut anything and the security post is a good tip. If your main concern is the bandwidth, you don' t want your neighbors it devours. Insofar as your LAN or LAN you can leave that as well without any problem of bandwidth. (Although with wireless operate in some connectivity issues) Try not to confuse LAN with WAN. LAN = network, WAN is you ISP a.k.a your bandwidth. Finally your WEP key (which is what I assume you enter whenever you sign out) you can leave in and click 'Disconnect' or you enter it each time

Route VPN site to site on one path other than the default gateway

I want to route VPN site-to-site on one path other than the default gateway

ASA 5510

OS 8.0 8.3 soon

1 (surf) adsl line interface default gateway

line 1 interface SDSL (10 VPN site-to-site)

1 LAN interface

What's possible?

Thank you

Sorry for my English

Here is the assumption that I will do:

-Your IP SHDL is 200.1.1.1, and the next hop is 200.1.1.2

-Your LAN-to-LAN ends on this interface (interface card crypto SHDL)

-VPN peer 1 - 150.1.1.1 and LAN is 192.168.1.0/24

-VPN peer 2 - 175.1.1.1 and LAN is 192.168.5.0/24

This is the routing based on the assumption above:

Route SHDL 150.1.1.1 255.255.255.255 200.1.1.2

Route SHDL 175.1.1.1 255.255.255.255 200.1.1.2

Route SHDL 192.168.1.0 255.255.255.0 200.1.1.2

Route SHDL 192.168.5.0 255.255.255.0 200.1.1.2

Hope that helps.

Static and NAT router to router VPN

Hello

I have two site VPN using routers. The VPN is fine, BUT - at the end of the seat, the customer has NAT entries static to allow incoming connections - any service that has a NAT static to allow incoming connections from the Internet is inaccessible in the same way. Ping, for example, doesn't have this problem because there is no static NAT entry. I tried to configure a route map-"No. - nat" according to the http://www.cisco.com/en/US/partner/tech/tk583/tk372/technologies_configuration_example09186a00800949ef.shtml , I thought I was working.

H.O. has the IP 131.203.64.0/24 and 135.0.0.0/24 (I know, I know - I'm trying to change), and the R.O. 192.168.1.0/24.

Bits of configuration:

IP nat inside source overload map route SHEEP interface Ethernet0

IP nat inside source static tcp 135.0.0.248 131.203.100.27 3389 3389 extensible

(other static removed)

Int-E0-In extended IP access list

ip permit 192.168.1.0 0.0.0.255 any

(other entries deleted)

access-list 198 deny ip 131.203.64.0 0.0.0.255 192.168.1.0 0.0.0.255

access-list 198 deny ip 135.0.0.0 0.0.0.255 192.168.1.0 0.0.0.255

access-list 198 allow ip 135.0.0.0 0.0.0.255 any

SHEEP allowed 10 route map

corresponds to the IP 198

1 remove the static entry for the specified host the VPN problem, but obviously breaks things :(

2. as mentioned, the VPN itself works fine, I can ping hosts perfectly.

Any help greatly appreciated :)

Thank you

Mike.

You must use the option of the route to the static NAT map. This is a new feature in 12.2 (4) T according to this page:

http://www.Cisco.com/univercd/CC/TD/doc/product/software/ios123/123cgcr/ipras_r/ip1_i2g.htm#1079180

He must do exactly what you want. The old, another way to do is use "The thing", where you create a loopback interface and don't make a nat interface and use routing strategy for routing VPN traffic to one address on the same subnet as the loopback interface, but not the address of the loop. IOS then that réacheminera traffic to the real destination (in this case the remote VPN site), but since now it is not a 'ip nat inside' interface, the static nat translations does not apply and the VPN traffic will not be translated. The problem with this solution is that all loopback traffic is switched to the process, so it is a bit of a hack, but these things are sometimes necessary.

HTH

IOS router + VPN + ACS downloadable IP ACL

I want to use the function "Downloadable IP ACL" 3825-router VPN (OI 12.4 T) in combination with a CBS.

In many documents and discussions, I read that it is possible to use the DACLs on "devices Cisco IOS version 12.3 (8) T or higher.

Authentication and authorization by the AEC works and the device gets some settings of the av-pair-feature.

I have tried several things to apply the DACL as the use of av pairs or ACS "Downloadable IP ACL" function, but nothing works.

In the debug log, I see that the av pair is transmitted to the device, but it is not used.

--> Can you tell me, is it possible to use the DACLs on the IOS routers?

--> How does it work? What can I change?

--> Is there a good manual to apply it?

Thanks for your help!

Martin

It would be useful to know the PURPOSE of what you're trying to do...

AFAIR client config mode requires no ACL for filtering short tunnel split ACL... and I have no way to test right now.

If you want to allow or not some clients access to certain subnets why not investigate tunneling ACL and vpn-filter in combination with ACS split will rather than for the DACL.

Unusual routing VPN configuration

Hi, I use a PIX 525 to our main site, and one of the remote sites using a router in 1721. The 1721 connects to the LAN. All traffic is forced to use a virtual private network between the remote sites and main. The intention was to force the internet traffic from the remote site through the filter of content on the main site, rather than use the split tunneling to leave straight out to the internet through their DSL connection.

The problem is that, of course, internet traffic this VPN comes back the PIX, Internet. Our content filter reflects the way of the switch connected to the internal interface of a PIX.

I need to find a way to route VPN traffic from the remote site to an ethernet on the PIX interface which will be connected to our switch stack. If I can do this without breaking the VPN, traffic should be filtered on the main façade and through VPN to the remote side.

Yes, you're pretty much toast unless:

you choose to configure a web proxy to Headquarters and set up remote PCs to use it. In this way, they use a proxy that is located behind the 8e6.

Same pix os 7 will not help, as all nat occurs on this topic - just remote communication will flow through the pix, never hit its physical interface or internal switch ports inside and so the 8e6.

VPN - question of General design for a ut of a router tunnel more

Hello

We have a router that has VPN connections with different partners of our company. VPN remote access were used on computers that are connecting to the different partners of our company.

There has been problems of this kind, that is to say put on both a watchdog and a customer vpn cisco router led to blue-screens on the PC.

The current idea is to put different tunnels from site to site on the router (default gateway of PC clients that connect to the partners). My question is... How our PC to get DHCP addresses on networks of visitors, once the tunnels are up? I guess I'm alittle confused about the address for the PC on our side how will work.

Thanks for your help.

Divide the pool of ip from the internal network, you're going to visit. for example the document below will be exaplain the same configuration in user mode.

http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00806ab788.shtml

Based on the IOS VPN Lan-to-Lan (NAT and route map Questions)

Hello world

I worked on my review of CCNA security and I have a question about this stage

LAN1 192.168.0.0/24---(routeur HQ)--10.10.10.0/30--(INTERNET)--20.20.20.0/30--(routeur Branch) - LAN2 192.168.1.0/24

I use 10.10.10.0/30 and 20.20.20.0/30 networks assuming that these are public addresses (is just a laboratory).

I read that if I want to make the VPN tunnel while I using NAT I must exclude valuable traffic from the NAT process so I look on the database of cisco for more help and I found this (look at the 3660 router configuration):

http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008045a2d2.shtml#T1

so, I applied this config for my routers, so the config is:

IP nat inside source map route sheep interface fastEthernet0/1

access list 110 deny ip 192.168.0.0. 0.0.0.255 192.168.1.0 0.0.0.255

access list 119 permit ip 192.168.0.0. 0.0.0.255 any

sheep allowed 10 route map

corresponds to the IP 110

I didn't really understand who is using the command route-map here, so I made this configuration:

IP nat inside list sheep interface FastEthernet0/1

sheep extended IP access list

deny ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255

Licensing ip 192.168.0.0 0.0.0.255 any

Two of them worked I could translate my LAN addresses to the public to address internet and also could establish the VPN tunnel. So my questions are:

1. What is the purpose of the road-map command?

2. What is the difference between these two configuration?

3. which one I should use and in what cases?

Thanks in advance

Jose

Jose,

Very good questions and in fact no need to the road map it.

Personally, I like using course maps because it allows much more flexibility than simply ACL setup, but in order to bypass the NAT source IPs, there is no need of route-maps and you can do this with the ACL directly.

I personally always use road-maps just because I can (route-maps are cool) haha

Route-maps are very useful in other scenarios where you need to put more of conditions or factors.

Remember that it is almost always more than one method to accomplish a task... which is one of those cases.

It will be useful.

Federico.

VPN between ASA and cisco router [phase2 question]

Hi all

I have a problem with IPSEC VPN between ASA and cisco router

I think that there is a problem in the phase 2

Can you please guide me where could be the problem.
I suspect questions ACL on the router, but I cannot fix. ACL on the router is specified below

Looking forward for your help

Phase 1 is like that

Cisco_router #sh crypto isakmp his

IPv4 Crypto ISAKMP Security Association
status of DST CBC State conn-id slot
78.x.x.41 87.x.x.4 QM_IDLE 2006 0 ACTIVE

and ASA

ASA # sh crypto isakmp his

ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 1

1 peer IKE: 78.x.x.41
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE

Phase 2 on SAA

ASA # sh crypto ipsec his
Interface: Outside
Tag crypto map: Outside_map, seq num: 20, local addr: 87.x.x.4

Outside_cryptomap_20 ip 172.19.209.0 access list allow 255.255.255.0 172.
19.194.0 255.255.255.0
local ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
current_peer: 78.x.x.41

#pkts program: 8813, #pkts encrypt: 8813, #pkts digest: 8813
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 8813, model of #pkts failed: 0, #pkts Dang failed: 0
#send errors: 0, #recv errors: 0

local crypto endpt. : 87.x.x.4, remote Start crypto. : 78.x.x.41

Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: C96393AB

SAS of the esp on arrival:
SPI: 0x3E9D820B (1050509835)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 7, crypto-card: Outside_map
calendar of his: service life remaining (KB/s) key: (4275000/3025)
Size IV: 8 bytes
support for replay detection: Y
outgoing esp sas:
SPI: 0xC96393AB (3378746283)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 7, crypto-card: Outside_map
calendar of his: service life remaining (KB/s) key: (4274994/3023)
Size IV: 8 bytes
support for replay detection: Y

Phase 2 on cisco router

protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
current_peer 87.x.x.4 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors

local crypto endpt. : 78.x.x.41, remote Start crypto. : 87.x.x.4
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer0
current outbound SPI: 0x0 (0)

SAS of the esp on arrival:

the arrival ah sas:

SAS of the CFP on arrival:

outgoing esp sas:

outgoing ah sas:

outgoing CFP sas:

protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
current_peer 87.x.x.4 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 8947, #pkts decrypt: 8947, #pkts check: 8947
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors

local crypto endpt. : 78.x.x.41, remote Start crypto. : 87.x.x.4
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer0
current outbound SPI: 0x3E9D820B (1050509835)

SAS of the esp on arrival:
SPI: 0xC96393AB (3378746283)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 29, flow_id: Motorola SEC 1.0:29, card crypto: mycryptomap
calendar of his: service life remaining (k/s) key: (4393981/1196)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

the arrival ah sas:

SAS of the CFP on arrival:

outgoing esp sas:
SPI: 0x3E9D820B (1050509835)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 30, flow_id: Motorola SEC 1.0:30, card crypto: mycryptomap
calendar of his: service life remaining (k/s) key: (4394007/1196)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

outgoing ah sas:

outgoing CFP sas:

VPN configuration is less in cisco router

access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
access-list 101 permit ip 172.19.206.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
access-list 101 permit ip 172.19.203.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect
access-list 101 permit ip 172.19.209.0 0.0.0.255 172.19.194.0 0.0.0.255 connect

access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
access-list 105 deny ip 172.19.206.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
access-list 105 deny ip 172.19.203.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect
access-list 105 deny ip 172.19.209.0 0.0.0.255 172.19.194.0 0.0.0.255 connect

sheep allowed 10 route map
corresponds to the IP 105

Crypto ipsec transform-set esp-3des esp-md5-hmac mytransformset

mycryptomap 100 ipsec-isakmp crypto map
the value of 87.x.x.4 peer
Set transform-set mytransformset
match address 101

crypto ISAKMP policy 100
BA 3des
md5 hash
preshared authentication
Group 2
ISAKMP crypto key xxx2011 address 87.x.x.4

Your permit for 105 ACL statement should be down is changed to match because it is the most general ACL.

You currently have:

Extend the 105 IP access list
5 permit ip 172.19.194.0 0.0.0.255 (18585 matches)
10 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
30 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
50 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect

It should be:

Extend the 105 IP access list
10 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
30 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
50 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect

IP 172.19.194.0 allow 60 0.0.0.255 (18585 matches)

To remove it and add it to the bottom:

105 extended IP access list

not 5

IP 172.19.194.0 allow 60 0.0.0.255 any

Then ' delete ip nat trans. "

and it should work now.

5 routing VPN site

Hi all

I threw myself little in this project without a lot of lead in. Basically, we have 5 sites

Site A: HQ with ASA 5520

Site B: Remote with 5505 with L2L at Site A

Site C: Remote with 5505 with L2L at Site A

Square D: distance with 5505 with L2L at the Site

Site E: Remote with 5505 with L2L at Site A

In an emergency, I had to get phone running systems when a T1 PTP line was cut at the beginning by the customer! I created a VLAN on each phone named 5505 and created the Tunnels of VPN L2L all return to the HQs 5520. Everything was good in the neighborhood, phones were talking about main PBX server to HQ, we could compose and in no problem. The problem is now the phone Vender tells us that we need routing between each site. We cannot compose between each remote site without using external number (whereas before you dial internal extensions in order to reach all other sites)

Site B needs to talk to the PBX to C, D and E (A, obviously as well but that is already at work) and so on.

I found topics dealing with 2 remote sites requiring a routing, however, with 4 that all need to routing to the other configs will very quickly very vast and complicated. There is already extra virtual private networks to of the HQ 5520 who go elsewhere and a good amount of security configurations, so the config is already pretty decently sized.

Is there a better way to do this, or should I start to write my setups now?

If I understand your question, you need to configure a list of VPN networks on each VPN Ray and the hub.

For example on the RADIUS B a crypto access list that is similar to:

ip-> A B permit

ip-> C B permit

ip-> D B permit

ip-E > B permit

corresponding Cryptography ACL on the hub for talks would be like:

IP-> B to allow

IP C-> B permit

allow the ip D-> B

E-> B ip license

Repeat for each Department accordingly.

So basically your configuration crypto would ' t grow, only the ACL crypto.

You can work with groups of objects to simplify the ACL crypt, in this case:

Crypto ACL on Hub B:

object-group VoIP-dst

object A

object C

object D

object E

object-group VoIP-src

object B

permit ip src VoIP VoIP-dst

And so on...

Just make sure your config allows same-security-traffic intra-interface

Cisco VPN router VPN client commercial provider

Hello

IM new Cisco VPN technology so please forgive my ignorance.

I am trying to connect my router to a comercial that support IPSec VPN provider gave me only that here the server ip, user name and password Secret.

With this information, that I can, for example, to connect with an iPhone using the monofamille in Cisco's VPN IPSec.

My question is how I put this up directly on a cisco router, or using CCP or config?

Thanks in advance for all the help/pointers

with the info given, there are the following config:

Crypto ipsec VPN ezvpn client
connect auto
Astrill key way2stars group
client mode
Peer 1.2.3.4
Astrill-email Astrill-password username password

Sent by Cisco Support technique iPad App

Cisco AnyConnect VPN question

I am ASA 5505 that I am of is running correctly by using the AnyConnect client. The question is, can I connect to the fine external interface, but cannot ping or attach them to any host on the inside. When I connect, it accepts the user name and password, and I can run the ASDM or SSH to the firewall very well, but not further. In the control, after I log in, I get an IP address inside, of the order of 10.7.30.x as expected.

Following configuration:

: Saved
:
ASA Version 8.2 (5)
!
asa5505 hostname
domain BLA
activate the password * encrypted
passwd * encrypted
no names

!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
switchport access vlan 150
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.7.30.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP EXTERNAL IP 255.255.255.128
!
interface Vlan150
nameif WLAN_GUESTS
security-level 50
IP 10.7.150.1 255.255.255.0
!
boot system Disk0: / asa825 - k8.bin
config to boot Disk0: / running-config
passive FTP mode
clock timezone STD - 7
DNS server-group DefaultDNS
domain BLA
permit same-security-traffic intra-interface
object-group service tcp Webaccess
port-object eq www
EQ object of the https port
object-group network McAfee
network-object 208.65.144.0 255.255.248.0
network-object 208.81.64.0 255.255.248.0
access extensive list ip 10.7.30.0 outside_1_cryptomap allow 255.255.255.0 192.168.24.0 255.255.252.0
access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 192.168.24.0 255.255.252.0
access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 172.16.10.0 255.255.255.0
outside_access_in list extended access permit tcp any host 159.87.30.252 eq smtp
outside_access_in list extended access permit tcp any host 159.87.30.136 Webaccess object-group
outside_access_in list extended access permit tcp any host 159.87.30.243 Webaccess object-group
access-list extended outside_access_in permit tcp host 159.87.70.66 host 159.87.30.251 eq lpd
outside_access_in list extended access permit tcp any host 159.87.30.252 Webaccess object-group
outside_access_in list extended access permit tcp any host 159.87.30.245 Webaccess object-group
outside_access_in list extended access permitted tcp object-group McAfee any eq smtp
permit access list extended ip 172.16.10.0 outside_access_in 255.255.255.0 10.7.30.0 255.255.255.0
outside_access_in list extended access permit ip host 159.87.64.30 all
standard access list vpn_users_splitTunnelAcl allow 10.7.30.0 255.255.255.0
IPS_TRAFFIC of access allowed any ip an extended list
access extensive list ip 10.7.30.0 outside_nat0_outbound allow 255.255.255.0 any
inside_access_in list extended access permit udp 10.7.30.0 255.255.255.0 any eq snmp
access extensive list ip 10.7.30.0 outside_cryptomap allow 255.255.255.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
host of logging inside the 10.7.30.37
Debugging trace record
Within 1500 MTU
Outside 1500 MTU
MTU 1500 WLAN_GUESTS
local pool VPN_POOL 10.7.30.190 - 10.7.30.200 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 0-list of access outside_nat0_outbound
NAT (WLAN_GUESTS) 1 0.0.0.0 0.0.0.0
public static 159.87.30.251 (Interior, exterior) 10.7.30.50 netmask 255.255.255.255
public static 159.87.30.245 (Interior, exterior) 10.7.30.53 netmask 255.255.255.255
public static 159.87.30.252 (Interior, exterior) 10.7.30.30 netmask 255.255.255.255
public static 159.87.30.243 (Interior, exterior) 10.7.30.19 netmask 255.255.255.255
public static 159.87.30.136 (Interior, exterior) 10.7.30.43 netmask 255.255.255.255
Access-group inside_access_in in interface inside the control plan
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 159.87.30.254 1
Route inside 172.16.1.0 255.255.255.0 10.7.30.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server ADWM-FPS-02 nt Protocol
AAA-server ADWM-FPS-02 (inside) host 10.7.30.32
Timeout 5
auth-domain NT ADWM-FPS-02 controller
AAA-server ADWM-FPS-02 (inside) host 10.7.30.49
auth-DC NT ADWM-DC02
AAA authentication http LOCAL console
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 206.169.55.66 255.255.255.255 outside
http 206.169.50.171 255.255.255.255 outside
http 10.7.30.0 255.255.255.0 inside
http 206.169.51.32 255.255.255.240 outside
http 159.87.35.84 255.255.255.255 outside
SNMP-server host within the 10.7.30.37 community * version 2 c
location of the SNMP server *.
contact SNMP Server
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map pfs set 20 Group1
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 206.169.55.66
map outside_map 1 set of transformation-ESP-3DES-MD5 crypto
card crypto outside_map 2 match address outside_cryptomap
peer set card crypto outside_map 2 159.87.64.30
card crypto outside_map 2 game of transformation-ESP-AES-192-SHA
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
Crypto ca trustpoint *.
Terminal registration
full domain name *.
name of the object *.
MYKEY keypairs
Configure CRL
Crypto ca trustpoint A1
Terminal registration
fqdn ***************
name of the object *.
MYKEY keypairs
Configure CRL
Crypto ca trustpoint INTERMEDIARY
Terminal registration
no client-type
Configure CRL
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint0
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint1
Configure CRL
ca encryption certificate chain *.
certificate ca 0301
BUNCH OF STUFF
quit smoking
A1 crypto ca certificate chain
OTHER LOTS of certificate
quit smoking
encryption ca INTERMEDIATE certificate chain
YET ANOTHER certificate
quit smoking
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca LAST BOUQUET
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
Telnet 10.7.30.0 255.255.255.0 inside
Telnet timeout 30
SSH 206.169.55.66 255.255.255.255 outside

SSH timeout 5
Console timeout 0
management-access inside
dhcpd 4.2.2.2 dns 8.8.8.8
!
dhcpd address 10.7.150.10 - 10.7.150.30 WLAN_GUESTS
enable WLAN_GUESTS dhcpd
!

a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4 - md5 of sha1
SSL-trust A1 out point
WebVPN
allow outside
AnyConnect essentials
SVC disk0:/anyconnect-dart-win-2.5.2019-k9.pkg 1 image
enable SVC
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal VPNUsers group strategy
Group Policy VPNUsers attributes
value of server DNS 10.7.30.20
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_users_splitTunnelAcl
dwm2000.WM.State.AZ.us value by default-field
Split-dns value dwm2000.wm.state.az.us
username HCadmin password * encrypted privilege 15
attributes global-tunnel-group DefaultWEBVPNGroup
address VPN_POOL pool
authentication-server-group ADWM-FPS-02
strategy - by default-VPNUsers group
tunnel-group 206.169.55.66 type ipsec-l2l
IPSec-attributes tunnel-group 206.169.55.66
pre-shared key *.
tunnel-group 159.87.64.30 type ipsec-l2l
IPSec-attributes tunnel-group 159.87.64.30
pre-shared key *.
!
class-map IPS_TRAFFIC
corresponds to the IPS_TRAFFIC access list
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
Review the ip options
class IPS_TRAFFIC
IPS inline help
!
global service-policy global_policy
field of context fast hostname
anonymous reporting remote call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:e70de424cf976e0a62b5668dc2284587
: end
ASDM image disk0: / asdm-645 - 206.bin
ASDM location 159.87.70.66 255.255.255.255 inside
ASDM location 208.65.144.0 255.255.248.0 inside
ASDM location 208.81.64.0 255.255.248.0 inside
ASDM location 172.16.10.0 255.255.255.0 inside
ASDM location 159.87.64.30 255.255.255.255 inside
don't allow no asdm history

Anyone have any ideas?

Hello

Please, add this line in your configuration and let me know if it works:

access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 10.7.30.0 255.255.255.0

I ask you to add that it is because you have not specified any exceptions for the return shipping. Once you add to it, will allow you to go through the tunnel VPN, packets back. When this command is not there, you will be able to access everything on the SAA but nothing behind it.

Let me know if it helps.

Thank you

Vishnu

EZVPN 2811 router VPN module

Hi all

I have a spare 2811 router that would like to use for the temporary easy VPN server.

the router IOS is already updated security advance 15.0 K9.

My question is the AIM - VPN a real map/module on the motherboard of the router or just pop up once the router has been upgraded to IOS security?

SH ve | I have IOS
Cisco IOS software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 15.0 (1) M8, RELEASE SOFTWARE (fc1)

#sh inv
NAME: "2811 chassis', DESCR:"2811 chassis.
PID: CISCO2811, VID: V02, SN: FTX0911Cxxx

NAME: ' PVDMII DSP SIMM with a DSP on the Slot 0 SubSlot 4 ', DESCR: 'PVDMII DSP SIMM with a DSP.
PID: PVDM2-16, VID: V01, SN: FOC13071xx

NAME: "virtual private network (VPN) on the Slot Module 0 ', DESCR: 'encryption PURPOSE Element '.
PID: AIM-VPN/EPII-PLUS, VID: v01, SN: FOC09072xx

You have now two VPN modules in your router:
1. The module for basic needs
2. The module see you in "inventory to see the" which is placed in the OBJECTIVE of on-board connector. This module has a flow more and a greater number of tunnel and will be used by default.
There are many examples of EzVPN configuration guide:

http://www.Cisco.com/c/en/us/TD/docs/iOS-XML/iOS/sec_conn_esyvpn/configuration/15-Mt/sec-easy-VPN-15-Mt-book/sec-easy-VPN-Srvr.html

If it is more then a temporary solution, I would also consider using an ASA to remote access VPN. EzVPN is more or less obsolete, and the ASA has many more features with the AnyConnect client. On the router, you can also configure remote access for AnyConnect, but it is much more complicated.

nat VPN question.

Try to find what happened. I had the remote end raise the tunnel, as they can ping resources on my side. I am unable to ping 10.90.238.148 through this tunnel. I used to be able to until the interface of K_Inc has been added. The network behind this interface is 10/8.

I asked a question earlier in another post and advises him to play opposite road of Cryptography. And who did it. I was able to ping 10.90.238.148 of 192.168.141.10, with the config below.

I am at a loss to why I can't all of a sudden. A bit of history, given routes have not changed. By adding the command set opposite road to cryptography, I find myself with a static entry for the 10.90.238.0 network is what fixed it initially so I don't think it's a problem of route. The remote end had an overlap with the 192.168.141.0/24 that is why my side is natted on the 10.40.27.0. None of the nats have changed so if adding the reverse route worked for a day, it should still work. Any thoughts?

interface GigabitEthernet0/3.10

VLAN 10

nameif K_Inc

security-level 100

IP address 192.168.10.254 255.255.255.0

interface GigabitEthernet0/3.141

VLAN 141

cold nameif

security-level 100

IP 192.168.141.254 255.255.255.0

(Cold) NAT 0 access-list sheep

NAT (cold) 1 192.168.141.0 255.255.255.0

Access extensive list ip 192.168.141.0 CSVPNOFFSITE allow 255.255.255.0 10.90.238.0 255.255.255.0

Access extensive list ip 10.40.27.0 CSVPNOFFSITE allow 255.255.255.0 10.90.238.0 255.255.255.0

Access extensive list ip 192.168.141.0 CSVPNNAT allow 255.255.255.0 10.90.238.0 255.255.255.0

IP 10.40.27.0 allow Access-list extended sheep 255.255.255.0 10.90.238.0 255.255.255.0

static 10.40.27.0 (cold, outside) - CSVPNNAT access list

card crypto Outside_map 5 corresponds to the address CSVPNOFFSITE

card crypto Outside_map 5 the value reverse-road

card crypto Outside_map 5 set pfs

card crypto Outside_map 5 set peer 20.x.x.3

Outside_map 5 transform-set ESP-3DES-MD5 crypto card game

card crypto Outside_map 5 defined security-association life seconds 28800

card crypto Outside_map 5 set security-association kilobytes of life 4608000

tunnel-group 20.x.x.3 type ipsec-l2l

20.x.x.3 Group of tunnel ipsec-attributes

pre-shared-key *.

Route outside 0.0.0.0 0.0.0.0 7.x.x.1 1

Route 10.0.0.0 K_Inc 255.192.0.0 192.168.10.252 1

Route K_Inc 10.64.0.0 255.224.0.0 192.168.10.252 1

Route K_Inc 10.100.100.0 255.255.255.0 192.168.10.252 1

Route K_Inc 10.128.0.0 255.128.0.0 192.168.10.252 1

Tunnel is up:

14 peer IKE: 20.x.x.243

Type: L2L role: answering machine

Generate a new key: no State: MM_ACTIVE

EDIT:

I just noticed when tracer packet i run I don't get a phase VPN or encrypt:

Packet-trace entry cold tcp 192.168.141.10 80 80 10.90.238.148 det

Phase: 1

Type: FLOW-SEARCH

Subtype:

Result: ALLOW

Config:

Additional information:

Not found no corresponding stream, creating a new stream

Phase: 2

Type:-ROUTE SEARCH

Subtype: entry

Result: ALLOW

Config:

Additional information:

in 10.90.238.0 255.255.255.0 outside

Phase: 3

Type: IP-OPTIONS

Subtype:

Result: ALLOW

Config:

Additional information:

Direct flow from returns search rule:

ID = 0xad048d08, priority = 0, sector = option-ip-enabled, deny = true

hits = 2954624, user_data = 0 x 0, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol

SRC ip = 0.0.0.0 mask 0.0.0.0, port = 0 =

DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0

Phase: 4

Type: QOS

Subtype:

Result: ALLOW

Config:

Additional information:

Direct flow from returns search rule:

ID = 0xb2ed4b80, priority = 72, domain = qos by class, deny = false

hits = 2954687, user_data = 0xb2ed49d8, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol

SRC ip = 0.0.0.0 mask 0.0.0.0, port = 0 =

DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0

Phase: 5

Type: FOVER

Subtype: Eve-updated

Result: ALLOW

Config:

Additional information:

Direct flow from returns search rule:

ID = 0xad090180, priority = 20, area = read, deny = false

hits = 618776, user_data = 0 x 0, cs_id = 0 x 0, flags = 0 x 0, Protocol = 6

SRC ip = 0.0.0.0 mask 0.0.0.0, port = 0 =

DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0

Phase: 6

Type: NAT

Subtype:

Result: ALLOW

Config:

static (ColdSpring, external) 74.x.x.50 192.168.141.10 netmask 255.255.255.255

match ip host 192.168.141.10 ColdSpring outside of any

static translation at 74.x.x.50

translate_hits = 610710, untranslate_hits = 188039

Additional information:

Definition of static 192.168.141.10/0 to 74.112.122.50/0 using subnet mask 255.255.255.255

Direct flow from returns search rule:

ID = 0xac541e50, priority = 5, area = nat, deny = false

hits = 610742, user_data = 0xac541c08, cs_id = 0 x 0, flags = 0 x 0 = 0 protocol

SRC ip = 192.168.141.10, mask is 255.255.255.255, port = 0

DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0

Phase: 7

Type: NAT

Subtype: host-limits

Result: ALLOW

Config:

static (ColdSpring, dmz) 192.168.141.0 192.168.141.0 netmask 255.255.255.0

match ip ColdSpring 192.168.141.0 255.255.255.0 dmz all

static translation at 192.168.141.0

translate_hits = 4194, untranslate_hits = 20032

Additional information:

Direct flow from returns search rule:

ID = 0xace2c1a0, priority = 5, area = host, deny = false

hits = 2954683, user_data = 0xace2ce68, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol

SRC ip = 192.168.141.0, mask is 255.255.255.0, port = 0

DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0

Phase: 8

Type: IP-OPTIONS

Subtype:

Result: ALLOW

Config:

Additional information:

Reverse flow from returns search rule:

ID = 0xaacbcb90, priority = 0, sector = option-ip-enabled, deny = true

hits = 282827537, user_data = 0 x 0, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol

SRC ip = 0.0.0.0 mask 0.0.0.0, port = 0 =

DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0

Phase: 9

Type: QOS

Subtype:

Result: ALLOW

Config:

Additional information:

Reverse flow from returns search rule:

ID = 0xb2ed5c78, priority = 72, domain = qos by class, deny = false

hits = 4749562, user_data = 0xb2ed5ad0, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol

SRC ip = 0.0.0.0 mask 0.0.0.0, port = 0 =

DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0

Phase: 10

Type: CREATING STREAMS

Subtype:

Result: ALLOW

Config:

Additional information:

New workflow created with the 339487904 id, package sent to the next module

Information module for forward flow...

snp_fp_inspect_ip_options

snp_fp_tcp_normalizer

snp_fp_translate

snp_fp_adjacency

snp_fp_fragment

snp_fp_tracer_drop

snp_ifc_stat

Information for reverse flow...

snp_fp_inspect_ip_options

snp_fp_translate

snp_fp_tcp_normalizer

snp_fp_adjacency

snp_fp_fragment

snp_fp_tracer_drop

snp_ifc_stat

Phase: 11

Type:-ROUTE SEARCH

Subtype: output and contiguity

Result: ALLOW

Config:

Additional information:

found 7.x.x.1 of next hop using ifc of evacuation outside

contiguity Active

0007.B400.1402 address of stretch following mac typo 51982146

Result:

input interface: cold

entry status: to the top

entry-line-status: to the top

output interface: outside

the status of the output: to the top

output-line-status: to the top

Action: allow

What version are you running to ASA?

My guess is that your two static NAT is configured above policy nat you have configured for the VPN? If this is the case, move your above these static NAT NAT policy and you should see the traffic start to flow properly.

--

Please note all useful posts

Route VPN question

Similar Questions

Maybe you are looking for